User Settings not working in Calendar Express after Upgrade from 6.2 to 6.3

After Installing Patch 121657-19 the Calendar Express view seems to mix up
the default preferences with the user selected preferences.
For example let's say the user selects the green color scheme in the options panel,
at the next login to Calendar Express the user gets for the default blue color scheme
for the top frame, and the green colors for the middle frame.
This seems to randomly change for each page and even between just reloading the
page with the browser's reload button. It seems like each frame just randomly has
either the default or the selected color scheme.
This also seems to happens with the other User Preferences like "Default Initial View"
or "Default Calendar Group".
Any idea where to look to figure this out is greatly appreciated.

mwohlf wrote:
After Installing Patch 121657-19 the Calendar Express view seems to mix up
the default preferences with the user selected preferences.I hit the same issue with a 6.2->6.3 upgraded system and a fresh 6.3 installation. A quick search didn't reveal any pre-existing bugs nor could I find any obvious problems delving into the xsl code -- please log a Sun support case to have this issue looked into further. Please note that in 6.3 calendar express is a deprecated interface so you should be making every effort to move to UWC/CE anyway.
Regards,
Shane.

Similar Messages

Universal Worklist UWL not working in NW04s SPS9 after upgrade from NW04

Hello all,
this is just a hint in case anyone has the same problem with the UWL.
It happened to me in 2 cases, that in a Portal 7 SPS9 the UWL only showed a blank page after upgrade from NW04. In NW04 the UWL worked.
The reason for it was something like a corrupt deployment (but there were no according error messages in any log files). The SAP Support told me to redeploy the UWLJWF*.sca according to note 895523, that worked.
You can check whether the deployment is the reason of a non-working UWL setting the property "Launch Web Dynpro UI" to 'no'. Then the old HTMLB sources (that should work) are used (But it is not recommended to use the old sources anymore)
Kind regards
Andreas

.. just a hint ..

Screens not working in ECC 6 after upgradation from 4.6c.

Hi,
The custom developed screens which where developed in 4.6c version is not working properly in ECC 6 after upgradation.Do i have to make any more changes for this .? If anyone have an idea please help me in this issue.The custom developed things are an extended functionality we have done to r/3.
Regards,
jinesh kumar c.

Hi,
Check the Transportatation Logs in STMS for the programs/screens and check whether they are successfully tranported or not?
Because some times we get Dynpro errors for transportation of the screens.
Reward if useful.
regards,
Anji

Some Calculations are not working in Discoverer 10g after upgrade from 4.1

Hi Gurus,
We are recently upgraded Oracle Discovere 10g from 4.1, some calculations are not working in Discoverer 10g. I appreciate if you could fix below calculation(s) in 10g.
CASE WHEN TRUNC("Expenditure Item Month") = '31-JAN2007' THEN SUM(Wtd Qty A) WHEN TRUNC("Expenditure Item Month") = '28-FEB-2007' THEN SUM(Wtd Qty A) WHEN TRUNC("Expenditure Item Month") = '31-MAR-2007' THEN SUM(Wtd Qty A) END
Thanks & Regards
Vikram

Sabra,
Not sure exactly what this might be... there could be an issue there.
Please make sure that you review the upgrade.log. Are there any errors / warnings?
Also, you might wanna peek the Metalink Note:262623.1 - Master Note for OracleAS Portal Upgrade Issues, where you'll find some nice things where to start looking at.
Later you may wanna open a Service Request into the Oracle Support.
I hope it helps...
Cheers,
Pedro.

ITunes does not work om iPhone 5 after upgrade to iOs7. App store is available without problems. do somone have a tip?

iTunes does not work om iPhone 5 after upgrade to iOs7. App store is available without problems. do somone have a tip?

Check Settings > General > Restrictions, and check out Contacts toward the bottom under the privacy restrictions.
That sounds like the probable cause you cannot add contacts.
Regarding the iCloud behavior, that sounds like it got huge (35,000) because of incorporating other contacts (from social media, perhaps). Also contacts sync has nothing to do with iCloud behavior. The whole idea of keeping your contacts in the cloud is that once you change them on one device, they change everywhere. Specific syncs are not relevant.

Outgoing calls not working on iphone 4S after upgrading to ios 6.0.1

outgoing calls not working on iphone 4S after upgrading to ios 6.0.1.
It always says call back ...
incoming is working
i tried number of sim cards from different networks but same issue
tries resetting network settings but it also didnt worked

Just counter-check the following settings.
1. Settings>General>Set Side Swith To: Rotation Lock
2. Make sure side switch is not in lock position
3. If necessary do a reset a few more times

WDJ - Right click- User settings , not working at all times

We are working on SAP Netweaver 7.4.
We have developed WDJ applications in PO server and are displaying the application in SAP EP using the remote iview method.
Our requirement: We need to show the users , right click ->User settings so that they can modify the view.
Steps taken: The allowuserpersonalisation has been set to True.
Issue:
Not all of the remote WDJ application are showing the User settings.
For e.g: If it is working for WDJ application A, it is not working for WDJ application B.
Here is where it gets more confusing !!!:
If role A contains WDJ application A and role B contains WDJ application B.
then:
1) if WDJ application B is assigned to the role A, then the User settings start working for it
2) if WDJ application A is assigned to the role B, then the User settings still work for it
3) if WDJ application B is assigned to the role C, then the User settings do not work.
Can anyone please help?

Hi,
normal right mouseclick is disabled as of 710 I guess, I assume you mean the ctrl+alt+right mouse click, right?
Also , I am not sure I fully understand your A-B-C example. Can you please elaborate it in a less abstract way? Can you show concrete examples what is not working regarding the end-user personalization? Are all wd java applications running in a non-standalone way when you test end-user personalization?
Cheers,
Ervin

ITunes Not Recognizing my iPod Touch after Upgrading from Tiger to Leopard

After upgrading from Tiger (10.4.x) to Leopard (10.5.0=>10.5.6), my iPod Touch is no longer recognized by iTunes 8.0.2. The iPod Touch no longer appears in iTunes' "source list" (left side pane in iTunes' GUI).
Immediately prior to that upgrade, my iPod Touch was working great with Tiger (10.4.x). iTunes 8.0.2 recognized it (listed it in sources) and always synchronized with it successfully.''
My iPod Touch is also not shown in the Finder. However, it does show up as recognized in iPhoto.
Any ideas on how to get the iPod recognized again in iTunes under Leopard?

Thanks to a posting by Jim in a different Apple Discussions (forum), my problem is now resolved. Read on for the details.
iPods & Finder. Some other postings incorrectly lead me to believe that the iPod would show up in the "Finder". Jim's posting set me straight on this.
iTunes Not Recognizing iPod Touch. Prior to Jim's posting, I had already read the article that Jim referenced (to remove and reinstall the Apple Mobile Device Service per article "http://support.apple.com/kb/HT1747").
Prior to Jim's posting, I had also read other articles in various "Apple Discussions" (forums) that suggested this recognition problem could be resolved by uninstalling/re-installing iTunes 8.0.2. Some implied that you could just re-install iTunes 8.0.2 right over the currently installed one without bothering to uninstall it.
Based on those postings, I "gambled" last night and simply downloaded and re-installed iTunes 8.0.2 (without uninstalling it first). I noticed during the installation that the Apple Mobile Device agent was also re-installed. Well, my gamble paid off! After the installation (and a reboot?), iTunes onces again RECOGNIZED my iPod Touch.

User Settings not working. Please help!

<TD noWraplign=right>I am trying to build some interactive portlets using User prefs and have had no luck. Any help would be greatly appreciated.
Here is my code for the first portlet (view_course_defaultView is set as a user preference in the web service):
privatevoidPage_Load(objectsender, System.EventArgs e)
IPortletContext context = PortletContextFactory.CreatePortletContext(Request, Response);
IPortletRequest pRequest = context.GetRequest();
IPortletResponse pResponse = context.GetResponse();
IPortletUser user = context.GetUser();
try
if(user.HasSettingsRight(SettingType.User))
pResponse.SetSettingValue(SettingType.User, "view_course_defaultView", "All");
else
Response.Write("You can't do that");
catch(Exception ex)
Response.Write(ex.Message + ex.StackTrace);
Here is my code for the second portlet (again view_course_defaultView is set as a User preference in the Web Service):
privatevoidPage_Load(objectsender, System.EventArgs e)
try
IPortletContext pContext = PortletContextFactory.CreatePortletContext(Request, Response);
IPortletResponse pResponse = pContext.GetResponse();
IPortletRequest pRequest = pContext.GetRequest();
IPortletUser pUser = pContext.GetUser();
if(pUser.HasSettingsRight(SettingType.User))
Response.Write(pRequest.GetSettingValue(SettingType.User, "view_course_defaultView"));
Response.Write(pRequest.GetSettingCollection(SettingType.User).Count);
catch(Exception ex)
Response.Write(ex.Message + ex.StackTrace);
The only thing written to the screen in the second portlet is 0 for the User settings count. Does anyone see what I am doing wrong?
Thanks,
Jackie Kajdzik

I am having the same issue. The Admin, Portal and CommunityPortal prefs set fine. However, the user pref will not set. Could this be because this pref is not to be set in this manner?

Camera not working and light blinking after upgrade

After upgrading to Mavericks, the built-in camera on my MacBook Air (mid-2013) has stopped working in all applications. When I start an application that uses the camera, the image does not appear, and the camera light blinks rapidly until I close the application. Console shows the following messages:
11/24/13 11:34:08.000 a.m. kernel[0]: AppleCamIn::power_off_hardware
11/24/13 11:34:08.000 a.m. kernel[0]: AppleCamIn::power_on_hardware
11/24/13 11:34:09.000 a.m. kernel[0]: ISPCPU: ERR: ./H4ISPCD/filters/IC/CImageCaptureH4FSM.cpp, 452: FlowIC00: MIPI error (interrupt source = 0x8)
11/24/13 11:34:09.000 a.m. kernel[0]: ISPCPU: ERR: ./H4ISPCD/filters/IC/CImageCaptureH4.cpp, 2503: FlowIC00: Perform error recovery (1).
The latter two messages repeat until I close the application.
This is not the same problem as the Skype camera issue that was resolved with a previous update. I have tried resetting the NVRAM and PMU, reinstalling Mavericks, and using the guest account.
This user has the same issue: https://discussions.apple.com/message/23721483#23721483
Any help would be greatly appreciated — I would really like to have my camera working!

Hello grmurchison,
Thank you for providing the details of the issue you are experiencing with your built-in iSight camera. You have taken some really great steps to isolate and troubleshoot the issue. I found an article with a couple of additional steps (you can skip the steps you have already taken):
Built-in iSight cameras
These steps are for iSight cameras that are built into a computer, such as the iMac G5 (iSight) or later, the MacBook, or MacBook Pro.
See if the issue is application-specific.
Try another application (iSight works with applications like iChat, PhotoBooth, and iMovie HD 6) to see if the iSight camera exhibits the same behavior in all applications. If it only happens in one application, try reinstalling that application.
See if the issue is user-specific.
Test your iSight camera in another user account. If the issue only occurs in one user, the issue would be isolated to user settings.
Find out if the computer recognizes the iSight
Check System Profiler (in the Utilities folder, inside the Applications folder). Under the USB header, check to see if the iSight camera is detected.
Reset SMC or PMU
Reset your computer's SMC or PMU, and then check System Profiler again. (SMC reset instructions for iMac G5 (iSight), Intel-based iMacs; PMU reset instructions for MacBook and MacBook Pro.)
If your built-in iSight camera is still not behaving correctly after trying all these steps, you may need to contact Apple or an Apple-Authorized Service Provider for service.
How to Troubleshoot iSight
http://support.apple.com/kb/ht2090
Thank you for using Apple Support Communities.
Best,
Sheila M.

"Allow insecure authentication" not working on mac mail after upgrade to Yosimite

I recently upgraded to the new Yosemite OS. Since then, I have not been able to access my ISP's IMAP server. After spending time troubleshooting with the service provider, it seems that the "allow insecure authentication" feature is not working. The password appears to be sent as a series of "*" which the server can not recognize and I fail the login. It is of note that I am still able to access this email account through my iPhone 4S with all the same settings and had no issues before the Yosimite upgrade. Is there anyway around this issue?

I had the same problem. Rebooting the computer fixed the issue for me.

Page Forward & Reverse buttons do not work & are "grayed-out" after upgrading to, as is the Main-Menu Items such as File-Edit-view etc...

After upgrading to Firefox 3.6.12 all functionality appeared to be intact. Then after a few days it lost the ability to "page forward" or to "page back" and are "grayed-out". Additionally, the Main menu items such as File, Edit, View, History, Bookmarks, Tools & Help are also grayed-out and non-functioning.
Also, the "Search Window" does not search, Web Searches need to be performed from within the URL window instead, for some crazy reason. If the URL window is blank when I enter a search into the actual search window the following appears in the URL window, "Search Bookmarks and History", which makes no sense.
I have noticed similar complaints in this Forum in the past but I have not seen any posted resolution to these issues. Is there a solution?

Create a new profile as a test to check if your current profile is causing the problems.<br />
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins"
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Auto Rotation not working on ipad 2 after upgrading to ios 6.0.1

Hi
I just upgraded my ipad 2 to ios 6.0.1 . Auto Rotate is not working ..I have tried to reboot(Pressing home and sleep button together.. I also noticed that red striker not appearing while doing it )
Also I made sure Lock Rotation is off.
Please help me..
Thanks

Just counter-check the following settings.
1. Settings>General>Set Side Swith To: Rotation Lock
2. Make sure side switch is not in lock position
3. If necessary do a reset a few more times

Import via Drag & Drop not working with LR CC (after Update from 5.7)

I always imported my pictures by just dragging them in the Windows Explorer and dropping them to the Lightroom Gallery tab.
This does not work with LR CC anymore.
The longer way via "Import" works fine.
Any suggestions?

With Gallery i meant Library, my mistake (wrong translation, i am using the german version).
What works with your setup doesn't work with mine.
I attached a screenshot:
As you can see (cursor) i can't import the file from the file explorer on the right.
(The file is not already in the catalogue and i am in the library tab grid view mode).
Using Windows 7 x64 prof Service Pack 1

Delete button doesn't work in tabular form after upgrade from APEX3.2 to 4

I just upgraded the APEX from 3.2 to 4.0. However, my application is not working anymore.
First of all, my delete button in tabular form is not working. When I select a row and click the delete button, the row is not deleted, however the message showed 1 row is deleted.
Could you anybody tell me how can I debug this problem?
Thanks a lot !

I had the same problem. I first tried the solution above, but that didn't work. I also had a derived column for a custom popup and some display only columns. I removed the derived column and took out the display columns from my query. I then made sure my column order matched the source query. I applied changes and the delete button worked. FYI. I found out by some testing that it was actually trying to delete from the table, but with the wrong id. My first editable field was qty so if the qty was equal to 2 it then tried to delete from the table where pk=2(I had to restore that record). I believe it is related to the bug above. Backup your app first. I always do before I mess with the tabular forms.
Jeff

User Settings not working in Calendar Express after Upgrade from 6.2 to 6.3

Similar Messages

Maybe you are looking for