User status in Q-info record not updating on UD

Hi All,
My required scenario was, delivery of a material from a vendor must pass through inspection series
u2022     Model
u2022     Preliminary  
u2022     Regular delivery 
For that,
1). Maintain different inspection types (with corresponding task list usages) and create inspection plans with these usages.
2). Maintain the corresponding status profiles for the object type QINF and assigned inspection type to each status in 'SM30 -    V_TQ32A'
3). Assign this status profiles in the quality info records for the relevant materials, vendors combination.
My problem is while GR against PO, inspection lot for the goods receipt is created automatically and system selects the inspection type as assigned to next status, BUT, When Quality person make a UD to inspection lot, the system NOT sets the next status in the status sequence i.e status not updating on UD. And even when UD is done for the existing lot system not allow for GR of next lot. 
Kindly let me know where I am wrong.
Regards,

closed

Similar Messages

  • Info record not updated from PO , PO updated from Info record

    Dear Gurus,
    I want to restrict Base price in PO will be copied from Valid info record. User does not permitted to change the Base price once info record not maintained.
    Kindly tell me the configuration steps to adopt the process ?
    I don't want to update infor record from PO also.
    I know while making PO i can untick infor record not update, but that is user specific.
    Thanks in advance
    With regards
    SD

    Dear Sidi,
    Thanks . Problem solved.
    When info record is maintained the price condition will get from there. for this change in condition type P001 , set "D" in  manual entries column.
    When info record is not maintained, then the system will try to get the price from last PO, if not present, it  will throw an error u201CNet price must be greater than 0u201D and sets price condition PBXX (manual entry) to manually enter the price you want.
    What you can do:
    Is make the condition type P000 as automatic only (option D as below) and also same for condition type PBXX.
    Regards
    Soumen

  • User status profile in Q-info record not updating on UD

    Hi All,
    My required scenario was, delivery of a material from a vendor must pass through inspection series
    u2022     Model
    u2022     Preliminary  
    u2022     Regular delivery 
    For that,
    1). Maintain different inspection types (with corresponding task list usages) and create inspection plans with these usages.
    2). Maintain the corresponding status profiles for the object type QINF and assigned inspection type to each status in 'SM30 - V_TQ32A'
    3). Assign this status profiles in the quality info records for the relevant materials, vendors combination.
    My problem is while GR against PO, inspection lot for the goods receipt is created automatically and system selects the inspection type as assigned to next status, BUT, When Quality person make a UD to inspection lot, the system NOT sets the next status in the status sequence i.e status not updating on UD. And even when UD is done for the existing lot system not allow for GR of next lot. 
    Kindly let me know where I am wrong.
    Regards,

    Hi,
    The problem is due to missing authorization object :B_USERSTAT".
    Assign this authorization object in your id/role and give necessary values in the fields (activity, authorization key, object category and status profile) and then carry out the transaction again.
    Thanks
    SUMIT.

  • Status profile in Q-info record not updating on UD

    HI All,
    My required scenario was, delivery of a material from a vendor must pass through inspection series
    u2022     Model
    u2022     Preliminary  
    u2022     Regular delivery 
    For that,
    1). Maintain different inspection types (with corresponding task list usages) and create inspection plans with these usages.
    2). Maintain the corresponding status profiles for the object type QINF and assigned inspection type to each status in 'SM30 - V_TQ32A'
    3). Assign this status profiles in the quality info records for the relevant materials, vendors combination.
    My problem is while GR against PO, inspection lot for the goods receipt is created automatically and system selects the inspection type as assigned to next status, BUT, When Quality person make a UD to inspection lot, the system NOT sets the next status in the status sequence i.e status not updating on UD. And even when UD is done for the existing lot system not allow for GR of next lot. 
    Kindly let me know where I am wrong.
    Regards,

    any clue??
    Regards,

  • Info Record not updating

    All,
    I have created a info record with net price 200 .
    Then I have created a PO for net price 350 .
    I have ticked the ' info update ' .
    But while going to the info record again the net price is not update .
    1. Why it is like this ?
    2. Also tax code I put in the PO which was blank in the info record .
        Tax code is not coming in the same info record , please explain ?
    regards

    Hi Sandeep,
    There are two types of info records,
    one with basic information, no prices etc. but with a PO history (and price history) attached
    the other is the full infor record maintained manually in ME11 and 12.
    The update info record flag on the PO ONLY updates the first type of info record, it does not affect the price etc., this can be added and maintained but only manually via ME11 or ME12.
    So the title of the flag is misleading.
    It works OK if you have the system set up to suggest the last price paid, but if you want to use FULL info records then all it is doing is recording the PO price history against the basic info record.
    Steve B

  • In transaction code BBP_PD the status of the workitem is not updating showi

    Hi Gurus,
    We have implemented N-Step BADI BBP_WFL_APPROV_BADI For Approvals Levels in SRM.
    Work flow is triggering correctly and workitem is sent at all the levels. But in transaction code BBP_PD the status of the workitem is not updating showing the error message "NO WORKITEM FOUND" also status is not updating in BBP_PD.
    Please reply with your suggestions.
    Thanks in advance.
    Madhukar

    Hi
    Thanks for your reply.
    We are getting "No workitem found" status in BBP_PD transaction. But all approval process is happening perfectly and when we check status through "Status Monitor " through web it is updating correct status.
    Status is updating in BBP_PD .Status of main workflow is displaying correctly and approval levels and corresponding approver names are displaying correctly, but only the status and time of approval is missing.
    can you suggest something on this issue.
    Workflow Item:                                                                               
    Workitem-ID        000002009126                                                                               
    Task                      WS90000040                                                                               
    Text                       Shopping Cart Approval N-Step 185522 (BADI)                                                                               
    Status                    STARTED                                                                               
    Statustext              In Process                                                                               
    Date                      09/24/2008                                                                               
    Time                     08:18:09                                                                               
    Node ID            Agent                    User                         State        Workitem       Created at                   
    0040000000      Kotesh APP       APP_KOTESH          No workitem found                                                  
    0040000002                                                                    No workitem found                                                  
    0040000001      shiva APP         APP_SHIVA               No workitem found                                                  
    0040000004                                                                    No workitem found                                                  
    0040000003     shiva APP         APP_SHIVA               No workitem found                                                  
    0040000006                                                                   No workitem found                                                  
    0040000005      SM1                 NNA_FA_SM_1         No workitem found                                                  
    0040000008                                                                   No workitem found                                                                               
    Regards
    Madhu

  • Delta records not updating from DSO to CUBE in BI 7

    Hi Experts,
    Delta records not updating from DSO to CUBE
    in DSO keyfigure value showing '0' but in CUBE same record showing '-I '
    I cheked in Change log table in DSO its have 5 records
    ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M -  -1
    ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M -   0
    ODSR_4LIF02ZV32F1M85DXHUCSH0DL -   0
    ODSR_4LIF02ZV32F1M85DXHUCSH0DL -   1
    ODSR_4LH8CXKUJPW2JDS0LC775N4MH -   0
    but active data table have one record - 0
    how to corrcct the delta load??
    Regards,
    Jai

    Hi,
    I think initially the value was 0 (ODSR_4LH8CXKUJPW2JDS0LC775N4MH - 0, new image in changelog) and this got loaded to the cube.
    Then the value got changed to 1 (ODSR_4LIF02ZV32F1M85DXHUCSH0DL - 0, before image & ODSR_4LIF02ZV32F1M85DXHUCSH0DL - 1, after image). Now this record updates the cube with value 1. The cube has 2 records, one with 0 value and the other with 1.
    The value got changed again to 0 (ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M - (-1), before image &
    ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M - 0, after image). Now these records get aggregated and update the cube with (-1).
    The cube has 3 records, with 0, 1 and -1 values....the effective total is 0 which is correct.
    Is this not what you see in the cube? were the earlier req deleted from the cube?

  • Purchase Info Record not found in Purchasing Organization 1000

    Hi all,
    While doing MIGO, Goods issue to cost center from consignment stock (201 k )
    i'm getting this error.
    "Purchase Info Record not found in Purchasing Organization 1000"
    i'm practising with standard company 1000.
    i have checked the all assignments.
    i.e., purch. org ->company code and
          purch. org-> plant.
          company code -> plant.
    Please guide me.
    regards,
    anand.

    Hi,
    Go and maintain Pur. Org 1000 against ur plant in :
    SPRO-Enterprise Structure-Assignments--MM-Assign Std Pur. Org for plant
    and please confirm that you have maintained the inforecord in Pur Org 1000 only and that too of Consignment type.
    Hope this helps
    Regards
    Dheeraj

  • IPod's "Last Played" info is not updated

    I've purchased a new iPod (5th gen, 60 gb) 6 months ago.
    Recently, all the tracks' "Last Played" info stopped updating. No matter what track I play on my iPod, the "Last Played" info is not updated on the iPod. Even when I go to the iPod tab on iTunes, the "Last Played" info is wrong, and actually not updated. By the way, the playcount also doesn't seem to be updated.
    So, how do I get this fixed and the "Last Played" thing working again? By the way, of course, when I play tracks on the iTunes through the pc the "Last Played" info is updated.
    And another detail: Does the fact I have purchased games for my iPod and synced them can cause this problem?
    Thanks.

    Yes, I update my iPod automatically.
    I have no idea why, but I connected it again a few minutes ago, and the problem is solved. Suddenly, the songs last played date updated everything I've played.
    So, you didn't actually solve my problem, but since I feel kind today, i will give you point (s).
    Intel P4   Windows XP Pro  

  • Error :Purchasing info record not found in purchasing organisation

    Hi,
    after invoice verification with T.Code MIRO,
    Goods issue for consumption: with T.Code MB1A
    it display error message: purchaseing info record not found in purchasing organisation, pls tell me steps to correct it.
    thanks in advance
    ramesh.

    Dear Azis,
             Double Click on the serial no of the Component you will get the  inforecord fieldin the Purchasing tab. But this is only for Stock Materials.
    Please recheck again your components.
    Regards,
    Shareeq
    Edited by: K M AHAMED SHAREEQ HUSSAIN on Oct 13, 2009 2:42 PM

  • Info Record Note

    HI,
    can someone tell me from which table i will be able to extact Info Record Note.
    i looked at the technical information of the field in transaction me13 but it shows RM06I-LTEX1, but this is a structure  .

    Here is a sample ...
    report zrich_0001.
    data: xid like thead-tdid value 'AT'.
    data: xname like thead-tdname.
    data: xobject like thead-tdobject value 'EINA'.
    data: begin of itxttab occurs 0.
            include structure tline.
    data: end of itxttab.
    parameters: p_infnr type eina-infnr.
    xname = p_infnr.
    call function 'READ_TEXT'
         exporting
              client                  = sy-mandt
              id                      = xid
              language                = sy-langu
              name                    = xname
              object                  = xobject
         tables
              lines                   = itxttab
         exceptions
              id                      = 1
              language                = 2
              name                    = 3
              not_found               = 4
              object                  = 5
              reference_check         = 6
              wrong_access_to_archive = 7
              others                  = 8.
    loop at itxttab.
      write:/ itxttab-tdline.
    endloop.
    Regards,
    Rich Heilman

  • Status profile - Quality Info record

    Hi,
    Pls explain about status profile: QM_P_DOL -
    Status check DOL.
    Waht is DOL?
    Why is required?
    Reg,
    RPV.

    Hi,
    Status profile is created by the user in general status management and used to control user statuses
    In a status profile you can:
    Define the sequence in which user statuses can be activated
    Define initial statuses
    Allow or prohibit certain business transactions     
    Status Profile Assigned to Quality Info Record:
    Use : The supply relationship can run through a sequence of statuses that you define in a status profile. The sequence of statuses for the supply relationship is updated whenever inspection lots are accepted in the usage decision.
    If you assign a status profile that has a mandatory sequence of statuses to a vendor relationship, the system creates inspection lots for origin 01 with an inspection type appropriate to the status of the vendor relationship.
    supply relationship : A business link with vendor or customer.
    Quality Management information for these business links are managed in the SAP system using the following master data:Vendor master record and Info record with reference to vendor, material and plant.
    SAP standard User profiles starts with QM_P for supply relationship. In your case
    QM_P stands for supply relationship and DOL might be User notation.
    Hope it is clear to you.
    Regards
    Venkat.V

  • Status scheme quality info record

    Hi,
    I've a question regarding the status scheme in the quality info record. Is it possible to have this for information purposes only? I'd like to use this to send to LIMS. In LIMS sampling depends on the current status. The status must not change automatically based on the number of goods receipts or ud's, but i want to maintain it manually.
    Thanks.
    Regards,
    Maarten

    Why can't you use "user status - Autherization object" in this case?
    Example
    Send user status information to LIMS and map it with LIMS sampling.
    The authorization key is the basis for status-dependent authorization verification.
    Whenever a user status is set or deleted, the user's authorization to do so is checked. The status profile, the object type and the authorization key for the user status concerned are checked.
    If, for example, you want to ensure that certain user statuses can be changed only by people in a particular group, you assign all those user statuses an authorization key.
    Then use authorization object B_USERSTAT to give authorizations for those authorization keys.

  • Need BADI or user exit to check info record on MM41/MM42.

    System:  SAP ECC 6.0 Retail
    Problem:  During article maintenance (MM41/MM42), we want to check certain fields on the info record (EINA) for only one valuation class.
    Steps already taken: 
    Checked the current BADi.  The current BADi, BADI_MATERIAL_CHECK, did not contain a parameter for EINA.  (It did contain parameters for MARA, MARC, MBEW, MKVE, etc.)
    Searched for other user exits and/or BADiu2019s.  In SPRO/IMG under Logistics General, Material Master, Retail Specific Settings, Settings for Core Master Data and BADi: Additional Checks and Data Adjustment, I found u201CWRF_MAT_MAINTAINDATAu201D which contains a method u201CMODIFY_INFORECORD_DATAu201D.  This looked like it may be what I was looking for.
    So I created an implementation ZWRF_MAT_MAINTAINDAT.  It insisted on defined filters.  So I set up the following filters:
    01     Core Article  Master Data Maintenance
    02     Article Copy Functions
    03     Article Mass Maintenance
    99     Not Specified
    Then I activated it.
    I put a break into the method, but the transaction MM42 (nor MM41) would stop at the break point.
    Did I miss a step?  Is this the wrong BADi?  Are the filters wrong?
    Can anyone help?

    There is BAdI for this.
    However, a SAP consultant provided the following:
    In IF_EX_BADI_MATERIAL_CHECK~CHECK_DATA_RETAIL
    METHOD if_ex_badi_material_check~check_data_retail.
    * Implementation of BADI_MATERIAL_CHECK
    * Author: Syama Srinivasan, SAP Retail
    * Date:   December 17, 2008
    * Description:
    * Check EINA fields in Purchasing View of Article Master Create/Modify using MM41 & MM42.
    * If "Valuation Class" in the "Basic View --> General Data" field is 3100, then ensure
    * that the "Var. Order Unit" OR "Return Agmt" fields in "Purchasing Veiw --> General
    * data for each vendor" are not blank.
    * Work area declaration.
      DATA: l_eina  TYPE eina,    "Purchasing Info Record: General Data
            l_maw1  TYPE maw1.    "Article Master: Default Fields and Special Retail Fields
    * Local variables
      DATA: lv_eina    TYPE char30 VALUE '(SAPLMGMW)EINA',      "EINA Work area
            lv_maw1    TYPE char30 VALUE '(SAPLMGMW)MAW1'.      "MAW1 Work
      DATA: ls_errdat  TYPE merrdat.
    * Field symbols
      FIELD-SYMBOLS: <fs_xmaw1> TYPE maw1,
                     <fs_xeina> TYPE eina.
      ASSIGN: (lv_maw1) TO  <fs_xmaw1>,
              (lv_eina) TO  <fs_xeina>.
      IF sy-tcode = 'MM41'
      OR sy-tcode = 'MM42'.
    * Perform the check only if "Valuation class" is 3100
        IF <fs_xeina> IS ASSIGNED AND
           <fs_xmaw1> IS ASSIGNED.
          IF <fs_xmaw1>-wbkla = '3100'
          AND <fs_xeina>-lifnr IS NOT INITIAL.
            IF <fs_xeina>-vabme IS INITIAL OR
               <fs_xeina>-rueck IS INITIAL.
    *        MESSAGE e009(z1id) WITH <fs_xmaw1>-wbkla.
              ls_errdat-msgid = 'Z1ID'.
              ls_errdat-msgty = 'E'.
              ls_errdat-msgno = '009'.
              ls_errdat-msgv1 = <fs_xmaw1>-wbkla.
              APPEND ls_errdat TO rt_errdat.
              MESSAGE e009(z1id) WITH <fs_xmaw1>-wbkla.
            ENDIF.
          ENDIF.
        ENDIF.
    * Perform the check only if "Valuation class" is 3100
        IF <fs_xeina> IS ASSIGNED AND
           <fs_xmaw1> IS ASSIGNED.
          IF <fs_xmaw1>-wbkla = '3100'
          AND <fs_xeina>-lifnr IS NOT INITIAL.
            IF <fs_xeina>-vabme NE '2'.
    *        <fs_xeina>-vabme = '2'.   This doesn't work
              ls_errdat-msgid = 'Z1ID'.
              ls_errdat-msgty = 'E'.
              ls_errdat-msgno = '010'.
              ls_errdat-msgv1 = <fs_xmaw1>-wbkla.
              APPEND ls_errdat TO rt_errdat.
              MESSAGE e010(z1id) WITH <fs_xmaw1>-wbkla.
            ENDIF.
          ENDIF.
        ENDIF.
      ENDIF.
    ENDMETHOD.

  • Price and Tax info is not update in the Order Repository

    Hi All,
    I just try to complete a check out flow with all details and submit the order .
    But It's not updating  few details like Price and Tax information in the Order repository.That's reason my order shows Incomplete status.
    Can any help me to complete this flow.?
    Regards,
    Raj Jaiswal

    Hi,
    Yes I am extending CreateCreditFormHandler and adding this code getPaymentGroupManager().addPaymentGroupToOrder(order, creditCardPaymentGroup); As you said previously.
    This is the code I have written In my template.
    User is filling credit card details from the UI.
    Please validate the following approach.
    <br>FirstName:<dsp:input bean="CreateCreditCardFormHandler.creditCard.billingAddress.firstName" beanvalue="Profile.billingAddress.firstName" size="30" type="text"/>
    <br>MiddleName:<dsp:input bean="CreateCreditCardFormHandler.creditCard.billingAddress.middleName" beanvalue="Profile.billingAddress.middleName" size="30" type="text"/>
    <br>LastName:<dsp:input bean="CreateCreditCardFormHandler.creditCard.billingAddress.lastName" beanvalue="Profile.billingAddress.lastName" size="30" type="text"/>
    <br>EmailAddress:<dsp:input bean="CreateCreditCardFormHandler.creditCard.billingAddress.email" beanvalue="Profile.email" size="30" type="text"/>
    <br>PhoneNumber:<dsp:input bean="CreateCreditCardFormHandler.creditCard.billingAddress.phoneNumber" beanvalue="Profile.billingAddress.phoneNumber" size="30" type="text"/>
    <br>Address:<dsp:input bean="CreateCreditCardFormHandler.creditCard.billingAddress.address1" beanvalue="Profile.billingAddress.address1" size="30" type="text"/>
    <br>Address (line 2):<dsp:input bean="CreateCreditCardFormHandler.creditCard.billingAddress.address2" beanvalue="Profile.billingAddress.address2" size="30" type="text"/>
                 <dsp:input bean="CreateCreditCardFormHandler.newCreditCardSuccessURL" type="hidden" value="co_confirm.jsp"/>
                <dsp:input bean="CreateCreditCardFormHandler.newCreditCardErrorURL" type="hidden" value="co_confirm.jsp"/>
                <dsp:input bean="CreateCreditCardFormHandler.newCreditCard" type="hidden" value="Enter Credit Card"/>
                  <dsp:input bean="AuctionPaymentGroup.order1" type="hidden" beanvalue="ShoppingCart.current.Id"/>
                <dsp:input bean="AuctionPaymentGroup.AddPaymentDetailsToOrder" type="submit" value=" Continue -->"/>
                <dsp:input bean="AuctionPaymentGroup.paymentGroupSuccessURL" type="hidden" value="co_confirm.jsp"/>
                <dsp:input bean="AuctionPaymentGroup.paymentGroupErrorURL" type="hidden" value="error.jsp"/>
    I have customized CreateCreditCardFormHandler and added below code.
    public boolean handleAddPaymentDetailsToOrder(DynamoHttpServletRequest pRequest,DynamoHttpServletResponse pResponse) throws ServletException,
                IOException {
             String pOrder=getOrder1();
            try{
                OrderManager orderManager=(OrderManager)pRequest.resolveName("/atg/commerce/order/OrderManager");
                Order order = orderManager.loadOrder(pOrder);
                System.out.println("orderManager----"+order.getId());
                PaymentGroupManager paymentGroupManager=(PaymentGroupManager)pRequest.resolveName("/atg/commerce/order/PaymentGroupManager");
                System.out.println("paymentGroupManager----"+paymentGroupManager.getAbsoluteName());
                //Create the PaymentGroup
                PaymentGroup paymentGroup = paymentGroupManager.createPaymentGroup();
                //Add the PaymentGroup to the Order
                paymentGroupManager.addPaymentGroupToOrder(order, paymentGroup);
            }catch(Exception ex)
                ex.printStackTrace();
            return true;
    In the next templates I just want to display  billing details which added by the user .
    regards,
    Raj jaiswal

Maybe you are looking for