User Status Profile for Notification PM
Dear Masters,
I know the steps to create the user statuses and user status profile for notification but I want a brief description on maintaining the user statuses. Can i have any document that can explain me the user statuses.
Hope to find the reply soon. Thanks in advance.
Chin2
Hi Naveen,
Thanks for such a valuable reply, this document is very much helpful to me. See the below example i am showing for the status profile i have created
STATUS PROFILE: ZP-NOTIF
Status number Status description Init Lowest Highest position priority
1 OPEN Open Notification no 1 1 1 1
2 RUNG Equip. Running Condition no 1 2 1 1
3 NRUN Non-Running Condition no 1 2 1 1
4 CLSD Closed no 1 2 1 1
When I am trying to set the first status (OPEN) to the notification, it works fine but even after I am assigning the order to this notification, put notification in process, assign equipment I cannot set the next status (i.e., RUNG) it is showing me the following error:
"Status RUNG is not allowed (QNF 100000000000) " -> ->
Diagnosis
The user status 'RUNG' has reference number 02. In the current object status 'QNF 100000000000', the reference number of a status may not be higher than 01.
Procedure
You can only set user status whose reference number is not higher than 01.
please help me solving this question its a bit urgent.
Thanks once again for your replies.
Similar Messages
-
Object Types in User Status profile for Investment managment
Is there any one who has idea about what object types should I select in User Status Profile for Investment management . this is very urgent .
Regards
Rama Shanker SharmaDear Ram,
User Status can be maintained in the system as foll
Maintain the Status Profile first in OK02
Status no Status Short text Initial status flag lowest Highest
10 NBU Not Budgeted ^ 10 20
20 BUD Budgeted 10 20
in
Status
NBU
maintain the required fields as required by your process requirement
Material purchase order
Material purchase requisition
Partially release project
Release etc
and define each line item weather it should be No influence/Allowed/Warning/Forbidden/No Action/Set/Delete
Repeat the same logic for
Status
BUD
I hope this solves your problem, if not please write in detail your requirement.
Regards,
Vikat Verlekar -
Automatic Selection of "User Status Profile" for Inspection lot
Hi all,
I have created "User Status Profile" for particular plant to block UD if Results are not recorded ; I want this 'User status profile' to be selected automatically in record usage decision screen - qa11 of inspection lot .Please let me know how to go about this?
Thanks
VeereshYou can call the inspectiion whatever you want up to I think 6, (maybe 8) characters.
You can use 04pppp where pppp = your plant ID. So 041000, 042000, 042010, 043000, 043140, etc...
In the insepction type setup in the material masters you can set the inpsection type you want to use in that plant as the "preferred" one by checking that box in the inspection setup in the material master.
FF -
Different user status profile for network header and activities
Hi everyone!
Is there any way to define different user status profile at network header level and at network activity level? As far as I know, it is only possible to enter a user profile at network type level, and both netwok headers and activities use the same statuses. Does it work this way?
Thanks!
Regards.
Edited by: Thalos on Jul 2, 2011 12:27 AMHi Punith, Hi abdul!
Thanks for the reply!
I've gone through the OPSC, but the thing is that here you define a user status profile at network plant level. But I need to define it at network activity level.
The reason why I need this is because we have types of activities. We use network activities for client activities, for internal activities, to identify and follow-up risk management, etc. Each group of activities -since they have different usages- has different user status associated. But as I don't have any way to assign different user status profiles, all the activities have the same statuses, although they will only use some of them.
Thanks!
Regards,
Thalos. -
User status profiles for work orders and sub-orders
Hi Experts,
I have the following question regarding status profiles for SAP PM work orders (but I guess it relates to all user status profiles).
Customizing
A status profile is defined for order type "PM_A", which contains an authorization key "OP" for certain user states (to be set by the ordering party)
Situation
The ordering party A creates an order of type PM_A for contractor B, and B then creates a sub-order of type PM_A for contractor C
Problem
- If I assign the authorization key "OP" only to roles of party A, then party B can't set the user states reserved for the ordering party (correct for the order A->B, but not for the sub-order B->C)
- If I assign the authorization key "OP" to roles of party A and party B, then B could set certain user states reserved for the ordering party in the order A->B, which is also wrong
Question
Is there a way to restrict sub-orders differently than "non-sub-orders", or do I have to create a "sub-order order-type" for each order type, in order to assign them different status profiles and authorization keys?
Thanks a lot!hi
since you have 3 roles to be assigned to the same order type with different authorization ,it is better you create an seperate order type for sub order and assign the user status with authorization for B and C
regards
thyagarajan -
User Status Profile for an Installed Base
hello everybody!
I need your help! I want to assign a User Status for an Installed Base, Anybody knows what is the step by step for this?
I already have the User status profile, but i dont know where I can assign it into de Ibase.
I think is into this Dialog step but I'm not sure. This is SAP CRM 7.0.
Thank you so much for your help, regards!Hi,
You need to add the below Object Types in your user status profile.
Go into your user status profile and click on the Object Types as highlighted below and then enable the list of object types. Then you will be able to see the status profile in the IBase header.
Enable these object types for IBase.
Allowed Object Types
General Object
Ibase Header
Product Master Data
Regards,
Siraj -
User Status Profile for Process Order Operations
Hello Experts.
I have a need to set up a User Status at the Process Order Operation level that will prevent operation confirmation when the status is Active .
I have been successful at the following:
--- Created a new Status Profile (transaction BS02),
--- Creating a u201CHoldu201D status,
--- Defined the Influence on Business Transactions,
--- Set the allowed Object Types for the profile.
--- In an individual Process Order operation, I can now select the Status Profile, and set the Hold status, and it functions correctly.
My problem is that I canu2019t figure out how to set my new profile as a default for Process Order Operations. For Production Orders, this is done in the IMG definition for the Order Type (transaction OPJH), updating field T003O-VRG_STSMA. However the Order Type definition for Process orders (transaction CORN) only has a field for a status profile at the header level. Iu2019ve searched through Configuration and the Recipe, and the Production Version, and the Control Key, but can find no where to set the default status profile for a Process Order Operation..
As a final desperate act, I manually edited a T003O record for a Process Order Type in our test system, but even this failed to set a default Operation Status Profile for subsequently created Process Orders.
If you have any knowledge about this, then please help.As of this date, we have still not implemented a fix, but I did get some information from someone else who has.
I'll post his information here for all to see. Hope you find it helpful.
From: Joe
Yes we managed to do it.
After several false starts and CMOD/projects which suffered because only the default keys (for order number, aufpl etc) were in place and not the actual, we coded up the IN_UPDATE method in the WORKORDER_UPDATE badi. This gives us the final format after the DB save (but before the commit). The update of the STATUS using the SAP std function module was actioned successfully but the status profile was not actually passed through. We assumed that this was because of the update task - so we introduced an INSERT into JSTO instead (a bit naughty I know, but desperate needs etc). If you require anything more let me know.
Best Regards
Joe -
User Status Profile for Outbound Delivery in EWM
Hi Gurus,
I have the following scenario. We're working with invoice before goods issue. Invoice is created upon user request on transaction /scwm/fd on option "Request Invoice + Save".
After the invoice Request is sent to ERP we need to block the possibility of deletion of the outbound delivery.
Send the request to ERP changes system status DIN on outbound delivery header. We've created a custom status profile with just one status (code BS02).
This status is set when standard "Request Invoice" is set. This works fine. On this custom status, we've marked the option for business transaction "Delete Document" as forbidden. This doesn't work. Even with our custom status active, its still possible to delete outbound delivery.
The custom status is has the "Outbound Delivery" object type allowed and its assigned to standard "/SCDL/OUT_FD_STANDARD" profile.
Anyone have any idea what could be the problem?
Thanks in advace.
Felipe TripodiHi Christian,
Thanks for your reply.
We've decided to implement badi "Validation for Actions" within delivery due to the lack of time to resolve the issue. This decision was based on note "1833378 - Prevent deletion of outbound delivery with invoice". This note gives you sample code for badi to check ERP billing status before deleting the document. We've adapted the code for our needs and it works great!
After your reply, i spent a little more time on user status, and found an OSS note that guides you trough some configuration steps on tcode /BOPF/CONF_UI. After applying this setting for business object /SCDL/FDO, the user status also worked fine!
Best Regards,
Felipe Tripodi -
User status profile for Contract block in SAP SD
Dear All
We have a business requirement. Let me explain this first.
Requirement is that every contract which is created by any user should be blocked. Some authorized users can release them. Sale order can not be created until the sale order is released.
Once the contract is released it should allow to create sale order. But after releasing contract if there is any change in quantity or net value or payment term etc. It should go in block status again and again those authorized user should release it for further processing.
I have done following things so far.
I have created status profile Z_SD_CON and assigned this in contract type in VOV8. I have also created "Authorization Key" Z0000001 and assigned in user master. But when i crated contract type CQ. It gave me following error.
Status profile Z_SD_CON is not allowed for "Sales order header"
Message no. BS020
Diagnosis
Status profile Z_SD_CON may not be used for object type 'Sales order header'.
Procedure
Use another status profile or allow the use of status profile Z_SD_CON by object type 'Sales order header'.
Please suggest.Hi,
You can control by defining various Statuses (Individual status of an object) . Once you selected the check box in object type come back and select each status and click on details (f2) now click on New entries (f5) system will show you the Business transactions. Here you can give the Influence and next action for each business transaction.
Like this way you can define en number of status profiles and assign to your document types as per your requirement.
TIP:
1.Authorization object for status profile is : B_USERSTAT
2. you can define the authorization groups also (t code:BS52) to assign against each status
The above both you can assign in user profile (role) ask your basis people to help on this.
Example: Suppose if you defined authorization group as Z123 & assigned against REAL status. Then the user who have the authorization for object B_USERSTAT & group as Z123 can only release the sales order.
Read the below thread also
[Status Profile|Sales Order Release Strategy;
Hope this will clear your query -
User Status Profile for Purchase order
hi
Can any one help me how to created user statuses other than system status for Purchase order? where to assign it to PO document type.
RajendraDear Rajendra,
I'm not sure there a standard field for user status in PO, you have to custom it, but it's not recommended.Perhaps u should check what if the critical use for this user status before u continue to custom.
regards -
Inactive user status profile for order
Hi All
In CRM quotation, the initial user status 'Quotaion created ' is active.Now using a BADI on customer expected price mismatch I am adding 'price mismatch' user status.Requiremnt is I need to have one user status active at any instance. I am trying to inactive the 'Quotaion created' status but not able to. I tried using CRM_STATUS_CHANGE_EXTERN,but not successful. Can anybody please help..
Regards,
Sai PrasadWhen you activate another user status the revious should be set to inactive by standard. You can have only one active user status, while on other hand you can have several active system statuses.
If you use function CRM_STATUS_CHANGE_EXTERN to set new user status, the current user status wil be automaticaly set to inactive. If you test it from se37, don't forget to use also BAPI_TRANSACTION_COMMIT.
Regards. -
Prevention of delivery when using "user status profile" for a sales order?
Hi,
I have used "user profile status" in the sales order "as a work flow" for releasing the sales order.
The user profile are as follows
a) 10: created
b) 20: Released
But I believe I am still able to create the delivery when the order status is still "10" created.
Any advise, user exit or workaround or should this happen.
Usefull answers will be rewarded.
ThanksDear Rajiv,
Please go through this SAP help link it will help you about Status Management in the sales order processing.
http://help.sap.com/saphelp_47x200/helpdata/en/dd/560629545a11d1a7020000e829fd11/frameset.htm
I hope htis will help you,
Regards,
Murali. -
Control of TASK (Release/Complete) from User Status at Header Notification
Dear All,
I have configured a user status profile for a notification type. In this a status is set to restrict following for Task used in Notification.
Complete Task : Forbidd.
Delete Task: Forbidd.
Release Task: Allowed.
Task Successful : Forbidd.
even after above setting done for the user status , iam not able to restrict the functions(mentioned above) for notification. Can any one tell me how to achieve this?
RajRaj,
Generally speaking, header user-statuses cannot control functions at a lower level (and vica versa) e.g. tasks, operations etc
You can control this via user-exits/BADIs (see link at the top of this forum)
PeteA -
BAPI_BUS2173_SET_STATUS should be able to set user status profile.
Hi,
I need use a workflow to setup user status profile for PHASE and TASK, but I found that the unique easy way to setup the user status profile for PHASE or TASK is manual operation. I have created a user status profile of the BUS2173 and BUS2175. I can't use BAPI_BUS2173_SET_STATUS function to setup user status profile, but it can be used to setup a user status after the user status profiel has been setup by manuay.
Why?
Best regards,
Arrow Yang.Hi,
Try calling BAPI_BUS2173_SET_STATUS first time for setting the status profile by passing the status profile in iv_status_profile parameter and the phase guid but not passing the user status to the bapi.
Now after this again call the same bapi, this time just passing the user status and phase guid and not passing anything in the status profile.
We have used this bapi to set the status profile.
Regards,
Simmi -
While for both project and WBS the user status profile is assigned in the project profile, the network activity status profile is assigned in the network type.
But where to default the network status profile? Or in the network type it should be for both: network and activity?
Thank you.Yes, you can default same user status profile for both network profile and activity.
if maintain XYZ user staus profile for network type ps01( example) and maintaining same network type in network profile ABC.
then you are having same user staus profile in both netwok as weel as activity.
Venkatesh
Maybe you are looking for
-
Why is the video audio white noise when I share my project since I updated to 10.0.9
On the movies I created before I updated to 10.0.9, the audio prortion of the video is now white noise. The audio is fine when played back in FCP, but when i share the project it is white noise. When I burn it to BluRay the audio is gone all together
-
How I get Oracle 9i (9.2.0.1)
I need install a 9.2.0.8 Linux x64 version but I can't find it. The database download page only appears version 10g or up, the 9.2.0.8 patch I got from metalink, but the primary installer no, any way to download it ?
-
Problem to install oracle 10g on linux
Hi, I want to install Oracle 10g on Linux (I have Linux X76CLLCFAUU 2.6.18-194.17.1.el5 #1 SMP Mon Sep 20 07:12:06 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux) , when i run ./runInstaller, i have the following error , do you known what is the problem : D
-
how can i store photos from my mac or ipad on icloud?
-
hello all thnaks for creating this support group i have been trying the various replies seen except the full restore i want to avoid that my ipod gets to very near the end of backup line step 1 then the ipod beeps sveral time and then itunes cuts of