User "System" loced

Hello all. For entering in Oracle 10g Db we start SQLPLUS. user-name "system" and
password containing @ (my mistake), TNS error view. Presently I know that problem
in "@" symbol. While understood the user "system" is locked....
As possible change password and unlock the user?
Or create the the new user for Oracle....
Please advise ....

Hi
Use brconnect to change the password
Check this link
http://help.sap.com/saphelp_nw04s/helpdata/en/4f/c3883989676778e10000000a11402f/content.htm
Thanks
Prince Jose

Similar Messages

User system performance is very slow

Hi Experts
I am facing a lot of problem with the user systems as bcoz of their slow performance since one month.Server is working fine
without any issues .we are using another software (I bolt server) for internal transactions.currently we are using sap b1 2007 and PL 17 and
IBM server configuration
Os -- windows server 2003
database - sql server 2005
Ram - 8GB,and 32 bit
Addons -15( for four database)
please sort this issue and i will be grateful to all
regards
jenny

Hi,
Since when did it runs in good condition? How may users connected?
15 Add-on running add-on can consume your RAM very fast.
To check if you need RAM, goto Task Manager and check if the Committed and is higher than the available
RAM then you need to add more RAM, using 64bit in your server is also an advantage.
Thanks.
CLint

How do I pass Settings on my SAPPLM User System Preferences on multiple com

Hello All,
I have put the DLL's for Solid Edge/Solid Work interface under my computer C drive and then registered them. Then I went to Solid Edge and Solid Works went to User System Preferences/ Options to make required settings on the SAP-PLM side (example setting for registering documents, creating characteristics, document load, document save...).
I have to install the interface on multiple computers now in network, with the same settings which I did on User System Preferences/ Options. Do I have to manually go to each computer to do these settings, or the process can be automated. Does my SAP-PLM User System preferences/Options also gets saved in Registery in HUSER SoftwareGedas. Can we mirror these registeries to multiple computers.
Kindly advice.
Thanks,
Sachin

Hi Sachin
Goto Link Log
and press SAVE button in right bottom corner
choose REG file option and export the entries
go to any other PC and run the reg file
i Hope this answers your question.
Niranjan
Award if Useful

LightDM greeter for a single-user system

I'm interested in using lightDM as my display manager. However, there seem to be a lot of greeters that are focused on a good experience for multi-user systems. All I'm have is a single-user system, so I'm looking for your guy's opinions on what the "best" lightDM greeter is for a single-user system. I want it to:
* Be pretty, even if it must be a bit more heavyweight. I consider "pretty" to mean modern/flat
* Be customizeable, hopefully with at LEAST customizeable colors, and preferably background images
* Have either a very modern/flat icon set, if there are icons at all, or customizeable icons
* Not force me to select my account every time I login, it should automatically "select" my account so all I have to do is enter the password. I *might* budge on this one if the design is *really* good
I'm ok if it has support for multiple users (I'm pretty sure every greeter out there will have that), but I don't want it to reserve too much space on the screen for multiple users, and I want it to still be good with one user. For example, I don't want it to be like crowd greeter, where it's nearly useless without many user accounts

Why not just test a number of greeters and evaluate which one most suits your use case? That's the common approach with most things.
You could also try other DMs like LXDM for example, in order to see how they compare.

Regd : How to find Validity date for a user in central user system

Hi Experts;
I want to get the list of users with profile SAP_ALL with following details like validity ,user type ,user name ,user id..
I can get through SUIM for each individual systems.Its very difficult to login to each system ,generate the report.So I prefered to go for Central system
But if I use central user system I have no option to find validity and user type for the system ( SUIM - > Cross system application )
I have also tried to the table USRO2 ( which gives only the list of users in the central system )
So is there any possible ways to find the Users with profile SAP _ALL with validity date in the central user system. So that I can easily generate it as one report instead of logging to each and every system
Regards
Sanjeev.S

Hi Ruchit
Thanks for your reply. I want to find the validity date of all users having SAP_ALL
profile of all child system connected through central user system .So it is possible
to do that in Centrals System by executing the report?
If I execute that report in Central user system will it give the details of all child
system connected to central system
I think it will give only the result of Central system and not the child system connected to Central system.Please clarify me.
I can execute the report by logging to each child system ,but it takes very long hours for me since there are many system in my landscape.
Awaiting for your reply.'
Thanks
Sanjeev.S

Can no longer logon to EM DBA-Studio 8.1.7. with user SYSTEM

Hello
my 8.1.7 Enterprise Edition Database shows some "strange bahavior". I can no longer logon to Enterprise Manager Console with user system. (Message: This Application needs more privileges...) But the user system still has the same system privileges as before when it worked fine. So what could have gone wrong?
The logon with user sys as sysdba still works.
I can still logon with any user in SQL Worksheet and SQL Plus for instance.
I have checked for any data loss......but all data still seems to be available. I checked for it with desc and select commands.
BUT.....I can no longer post a "select * from cat"
(Message: Table or view does not exist !)
The database is in archivelog mode in case a recovery is necessary.
Before the "crash" a normal user schema dump was exported without any problem. But that shouldn't have triggered off the problem!?
Any help would be greatly appreciated!
Thank you very much for any hint.
Stefan
PS: My user SYSTEM already has the DBA and the SELECT_CATALOG_ROLE but still is no longer able to logon in DBA-Studio!
I assume it is a more serious problem since none of my users can still perform a "select * from cat" which should always be possible!

Stopping the jrew process is what i do anyway, but that doesn't seem to be e very elegant way of working with DBA Studio. What is the reason for this behavior?
Thanks to anyone who can give me a clue

How to detect the Acrobat Browser Plug-in version installed on a users system for non-IE browsers?

How to detect the *Acrobat Browser Plug-in version* installed on a users system, on Firefox, Safari, Opera, etc?
Or one script for detecting Plug-in version for major browsers. Need full example code.

Wrote an article on this with code samples (Javascript + HTML) - basically there are differences between IE and other browsers. Chrome natively comes with the Chrome PDF Viewer so I've incorporated that in my detection script.
The script detects the browser type, and the installed acrobat version...
Have a look here:
Detect the Adobe Reader Plugin

User SYSTEM does not exist

Hi there,
Using the MDK:
-I have set up my publication items
-added them to my publication
-used the packaging wizard to setup my application and attach it to the publication
-used the Oracle Mobile administrator to create a user.
-used the Oracle Mobile administrator to assign the user to the application.
On Win32, I download the WIN32 Setup and run it with the user and password.
It sets up the DMAgent, etc, and installs all of the oracle lite stuff into c:\mobileclient
Next, I run MSYNC.EXE with the user's name. It completes successfully. What happens next is very strange:
C:\Documents and Settings\allen>msql system/moogle@polite:tenchi_pman
Oracle Lite MSQL Version 10.3.0.1.0
Copyright (c) 1997, 2007, Oracle. All rights reserved.
[POL-5246] user SYSTEM does not exist
C:\Documents and Settings\allen>
Has anyone encountered this?
Thanks,
Allen
p.s. my environment details are as follows:
Mobile Repository Configuration
Operating System: Linux 2.6
Oracle Database: 10.2.0.3.0
Mobile Server Configuration (all the latest patches applied at this time)
Mobile Server Install Type: Standalone
Operating System: Microsoft Windows XP
Mobile Server: 10.3.0.1.0
Secure Socket Layer: No
Part of Web Farm: No
Java J2SE: 1.5.0_15
Mobile Client Configuration
Mobile Client Type: Windows 32
Operating System: Microsoft Windows XP SP2
Mobile Client: 10.3.0.1.0

Is there a way for me to create the SYSTEM user in the Oracle Lite database, or is this error a symptom of a different problem?
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.CAT (TABLE_NAME, TABLE_TYPE) AS SELECT TABLE_NAME, TABLE_TYPE FROM SYSTEM."okClass" WHERE TABLE_TYPE IN ('TABLE', 'VIEW')
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ALL_CONSTRAINTS (OWNER, CONSTRAINT_NAME, CONSTRAINT_TYPE, TABLE_NAME, SEARCH_CONDITION, R_OWNER, R_CONSTRAINT_NAME, DELETE_RULE, STATUS, VALIDATED) AS SELECT OWNER, CONSTRAINT_NAME, CONSTRAINT_TYPE, TABLE_NAME, SEARCH_CONDITION, R_OWNER, R_CONSTRAINT_NAME, DELETE_RULE, STATUS, VALIDATED FROM SYSTEM.POL__CONS
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ALL_CONS_COLUMNS ( OWNER, CONSTRAINT_NAME, TABLE_NAME, COLUMN_NAME, POSITION) AS SELECT OWNER, CONSTRAINT_NAME, TABLE_NAME, COLUMN_NAME, POSITION FROM SYSTEM.POL__COLUSAGE
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.TABLE_PRIVILEGES ( OWNER, TABLE_NAME, GRANTOR, GRANTEE, GRANT_TYPE, GRANTABLE) AS SELECT OWNER, TABLE_NAME, GRANTOR, GRANTEE, GRANT_TYPE, GRANTABLE FROM SYSTEM.ALL_PRIVILEGES WHERE OBJECT_TYPE = 0
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.COLUMN_PRIVILEGES ( OWNER, TABLE_NAME, COLUMN_NAME, GRANTOR, GRANTEE, GRANT_TYPE, GRANTABLE) AS SELECT OWNER, TABLE_NAME, COLUMN_NAME, GRANTOR, GRANTEE, GRANT_TYPE, GRANTABLE FROM SYSTEM.ALL_PRIVILEGES WHERE OBJECT_TYPE = 5
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ALL_VIEWS ( OWNER, VIEW_NAME, TEXT_LENGTH, TEXT) AS SELECT TABLE_SCH, TABLE_NAME, VIEW_LEN, VIEW_TEXT FROM SYSTEM."okClass" WHERE TABLE_TYPE IN ('VIEW')
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ALL_TABLES ( OWNER, TABLE_NAME, TABLESPACE_NAME, CLUSTER_NAME, PCT_FREE, PCT_USED, INI_TRANS, MAX_TRANS, INITIAL_EXTENT, NEXT_EXTENT, MIN_EXTENTS, MAX_EXTENTS, PCT_INCREASE, BACKED_UP, NUM_ROWS, BLOCKS, EMPTY_BLOCKS, AVG_SPACE, CHAIN_CNT, AVG_ROW_LEN) AS SELECT TABLE_SCH, TABLE_NAME, CAST('OOT' AS VARCHAR(128)), CAST(NULL AS VARCHAR(128)), CAST(0 AS INTEGER), CAST(0 AS INTEGER), CAST(0 AS INTEGER), CAST(0 AS INTEGER), CAST(NULL AS INTEGER), CAST(NULL AS INTEGER), CAST(NULL AS INTEGER), CAST(NULL AS INTEGER), CAST(NULL AS INTEGER), CAST(NULL AS VARCHAR(1)), CAST(NULL AS INTEGER), CAST(NULL AS INTEGER), CAST(NULL AS INTEGER), CAST(NULL AS INTEGER), CAST(NULL AS INTEGER), CAST(NULL AS INTEGER) FROM SYSTEM."okClass" WHERE TABLE_TYPE IN ('TABLE')
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ALL_TAB_COLUMNS ( OWNER, TABLE_NAME, COLUMN_NAME, DATA_TYPE, DATA_LENGTH, DATA_PRECISION, DATA_SCALE, NULLABLE, COLUMN_ID, DEFAULT_LENGTH, DATA_DEFAULT, NUM_DISTINCT, LOW_VALUE, HIGH_VALUE, IS_HIDDEN) AS SELECT COLUMN_SCH, TABLE_NAME, COLUMN_NAME, CASE TYPE_CODE WHEN -16 THEN 'NCLOB' WHEN -15 THEN 'CLOB' WHEN -14 THEN 'BLOB' WHEN -13 THEN CAST('LONG' AS VARCHAR(30)) WHEN -12 THEN 'NUMBER' WHEN -11 THEN 'ROWID' WHEN -10 THEN 'LONG RAW' WHEN -9 THEN 'RAW' WHEN -8 THEN 'TINYINT' WHEN -7 THEN 'LONG VARBINARY' WHEN -6 THEN 'VARBINARY' WHEN -5 THEN 'BINARY' WHEN -4 THEN 'BIGINT' WHEN -3 THEN 'LONG VARCHAR' WHEN -2 THEN 'REF' WHEN -1 THEN 'UNKNOWN' WHEN 1 THEN 'CHAR' WHEN 2 THEN 'NUMERIC' WHEN 3 THEN 'DECIMAL' WHEN 4 THEN 'INTEGER' WHEN 5 THEN 'SMALLINT' WHEN 6 THEN 'FLOAT' WHEN 7 THEN 'REAL' WHEN 8 THEN 'DOUBLE' WHEN 9 THEN CASE SUBTYPE_CODE WHEN 1 THEN CAST('DATE' AS VARCHAR(9)) WHEN 2 THEN 'TIME' WHEN 4 THEN 'TIMESTAMP' ELSE 'EMPTY' END WHEN 10 THEN 'INTERVAL' WHEN 12 THEN 'VARCHAR' WHEN 13 THEN 'VARCHAR2' WHEN 14 THEN 'BIT' ELSE 'EMPTY' END, CASE WHEN TYPE_CODE <> 9 THEN COL_PRECISION WHEN TYPE_CODE = 9 AND SUBTYPE_CODE = 1 THEN 8 WHEN TYPE_CODE = 9 AND SUBTYPE_CODE = 2 THEN 6 WHEN TYPE_CODE = 9 AND SUBTYPE_CODE = 4 THEN 15 ELSE CAST(NULL AS INTEGER) END, CASE WHEN TYPE_CODE NOT IN (-16, -15, -14, -13, -11, -10, -9, -7, -6, -5, -3, 1, 9, 12, 13) THEN COL_PRECISION ELSE CAST(NULL AS INTEGER) END, CASE WHEN TYPE_CODE IN (-12, 2, 3, 4, 5, 10) THEN COL_SCALE ELSE CAST(NULL AS INTEGER) END, CASE NULLABILITY WHEN 0 THEN CAST('N' AS VARCHAR(1)) ELSE 'Y' END, POSITION, CASE DEFAULT_LENGTH WHEN 0 THEN CAST(NULL AS INTEGER) ELSE DEFAULT_LENGTH END, CASE DEFAULT_LENGTH WHEN 0 THEN CAST(NULL AS VARCHAR(4096)) ELSE DATA_DEFAULT END, CAST(NULL AS INTEGER), CAST(NULL AS INTEGER), CAST(NULL AS INTEGER), CASE ISHIDDEN WHEN 0 THEN CAST('N' AS VARCHAR(1)) ELSE 'Y' END FROM SYSTEM."okAttr" WHERE TABLE_TYPE IN ('TABLE', 'VIEW')
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.USER_OBJECTS ( OWNER, OBJECT_NAME, OBJECT_ID, OBJECT_TYPE, CREATED, LAST_DDL_TIME, CREATED_TIME, STATUS) AS SELECT SCHEMA_NAME, OBJECT_NAME, OBJECT_ID, CASE OBJECT_TYPE WHEN 0 THEN CAST('TABLE' AS VARCHAR(128)) WHEN 1 THEN 'VIEW' WHEN 2 THEN 'INDEX' WHEN 3 THEN 'SEQUENCE' ELSE 'SYNONYM' END, CAST(CREATED AS DATE), CAST(CREATED AS DATE), CAST(CAST(CREATED AS TIMESTAMP(0)) AS VARCHAR(128)), CAST('VALID' AS VARCHAR(128)) FROM SYSTEM.POL__ALLOBJ WHERE OBJECT_NAME NOT LIKE 'POL_%' AND SCHEMA_NAME IN (SELECT NAME FROM POL__SCHEMATA WHERE OWNER = USER)
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ALL_USERS ( USERNAME, USER_ID, CREATED) AS SELECT USERNAME, USER_ID, CREATED FROM SYSTEM.POL__USERS
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ALL_OBJECTS ( OWNER, OBJECT_NAME, OBJECT_TYPE, CREATED, STATUS) AS SELECT SCHEMA_NAME, OBJECT_NAME, CASE OBJECT_TYPE WHEN 0 THEN CAST('TABLE' AS VARCHAR(128)) WHEN 1 THEN 'VIEW' WHEN 2 THEN 'INDEX' WHEN 3 THEN 'SEQUENCE' ELSE 'SYNONYM' END, CAST(CREATED AS DATE), CAST('VALID' AS VARCHAR(128)) FROM SYSTEM.POL__ALLOBJ
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ACCESSIBLE_COLUMNS ( OWNER, TABLE_NAME, COLUMN_NAME, DATA_TYPE, DATA_LENGTH, DATA_PRECISION, DATA_SCALE, NULLABLE, COLUMN_ID, DEFAULT_LENGTH, DATA_DEFAULT, NUM_DISTINCT, LOW_VALUE, HIGH_VALUE) AS SELECT COLUMN_SCH, TABLE_NAME, COLUMN_NAME, CASE TYPE_CODE WHEN -4 THEN CAST('BIGINT' AS VARCHAR(128)) WHEN -3 THEN 'LONGVARCHAR' WHEN -2 THEN 'REF' WHEN -1 THEN 'UNKNOWN' WHEN 1 THEN 'CHAR' WHEN 2 THEN 'NUMERIC' WHEN 3 THEN 'DECIMAL' WHEN 4 THEN 'INTEGER' WHEN 5 THEN 'SMALLINT' WHEN 6 THEN 'FLOAT' WHEN 7 THEN 'REAL' WHEN 8 THEN 'DOUBLE' WHEN 9 THEN 'DATETIME' WHEN 10 THEN 'INTERVAL' WHEN 11 THEN 'VARCHAR' ELSE 'EMPTY' END, CASE WHEN TYPE_CODE IN (-3, 1, 11) THEN COL_PRECISION ELSE CAST(NULL AS INTEGER) END, CASE WHEN TYPE_CODE NOT IN (-3, 1, 11) THEN COL_PRECISION ELSE CAST(NULL AS INTEGER) END, CASE WHEN TYPE_CODE IN (2, 3, 4, 5, 9, 10) THEN COL_SCALE ELSE CAST(NULL AS INTEGER) END, CASE NULLABILITY WHEN 0 THEN CAST('N' AS VARCHAR(1)) ELSE 'Y' END, POSITION, CAST(NULL AS INTEGER), CAST(NULL AS INTEGER), CAST(NULL AS INTEGER), CAST(NULL AS INTEGER), CAST(NULL AS INTEGER) FROM SYSTEM."okAttr" WHERE TABLE_TYPE IN ('TABLE', 'VIEW')
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ALL_INDEXES ( OWNER, INDEX_NAME, TABLE_OWNER, TABLE_NAME, TABLE_TYPE, UNIQUENESS) AS SELECT SCHEMA_NAME, INDEX_NAME, TABLE_SCHEMA, TABLE_NAME, CAST('TABLE' AS VARCHAR(10)), IS_UNIQUE FROM SYSTEM.POL__INDICES
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ALL_IND_COLUMNS ( INDEX_OWNER, INDEX_NAME, TABLE_OWNER, TABLE_NAME, COLUMN_NAME, COLUMN_POSITION) AS SELECT SCHEMA_NAME, INDEX_NAME, TABLE_SCHEMA, TABLE_NAME, COLUMN_NAME, INDEX_POSITION FROM SYSTEM.POL__INDICESDT
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ALL_COL_COMMENTS ( OWNER, TABLE_NAME, COLUMN_NAME, COMMENTS) AS SELECT COLUMN_SCH, TABLE_NAME, COLUMN_NAME, COLUMN_COMMENT FROM SYSTEM."okAttr" WHERE COLUMN_COMMENT IS NOT NULL
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ALL_TAB_COMMENTS ( OWNER, TABLE_NAME, TABLE_TYPE, COMMENTS) AS SELECT TABLE_SCH, TABLE_NAME, TABLE_TYPE, TABLE_COMMENT FROM SYSTEM."okClass" WHERE TABLE_COMMENT IS NOT NULL
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ALL_SYNONYMS ( OWNER, SYNONYM_NAME, TABLE_OWNER, TABLE_NAME, DB_LINK) AS SELECT OWNER, SYNONYM_NAME, TABLE_OWNER, TABLE_NAME, CAST('NULL' AS VARCHAR(128)) FROM SYSTEM.POL__SYNONYM
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ALL_SEQUENCES ( SEQUENCE_OWNER, SEQUENCE_NAME, MIN_VALUE, MAX_VALUE, INCREMENT_BY) AS SELECT SCHEMA_NAME, SEQ_NAME, MIN_VALUE, MAX_VALUE, INC_BY FROM SYSTEM.POL__SEQ WHERE SEQ_NAME NOT LIKE 'POL_%'
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.DATABASE_PARAMETERS AS SELECT PARAMETER, VALUE FROM SYSTEM.POL__DATABASE_PARAMETERS
Does anything look amiss with this oldb_trc.txt file?
Allen

User "system" doesn not have Permission "modify"

Using the Admin console, I am trying to add a new permission to an ACL and I am running
in to an error. The ACL is "weblogic.jndi.lightbridge.rms" and I am trying to add
the "lookup" permission. The error that I encounter is:
User "system" does not have Permission "modify" based on ACL "weblogic.admin.acl".
I have tried given the "system" user the permission (through the Admin console) but
I encounter the same error. I seem to have run into a "chicken or the egg" problem.
How do I give the "system" user the permission?

Try adding this entry to filerealm.properties and rebooting the server
acl.modify.weblogic.admin.acl=Administrators
and make sure that the "system" user is in the "Administrators" group. It should be by
default.
Now you should be able to add any ACL's and corresponding privileges that you like.
You could also add your ACL manually to fileRealm.properties--
acl.lookup.weblogic.jndi.lightbridge.rms=system
Cheers
Joe Jerry
Tom Muldoon wrote:
Using the Admin console, I am trying to add a new permission to an ACL and I am running
in to an error. The ACL is "weblogic.jndi.lightbridge.rms" and I am trying to add
the "lookup" permission. The error that I encounter is:
User "system" does not have Permission "modify" based on ACL "weblogic.admin.acl".
I have tried given the "system" user the permission (through the Admin console) but
I encounter the same error. I seem to have run into a "chicken or the egg" problem.
How do I give the "system" user the permission?

Java.lang.SecurityException: Authentication for user system denied in realm wl_realm Error.

 Getting this security exception when trying to pull a message from one weblogic
 instance JMS queue, and sending the message (via a MDB) to another machine's JMS
 queue.
 Ex. Here's the scenario.
 Two Windows2000Server machines,
 one at ip ... xxx.xxx.x.16,
 second machine at ... xxx.xxx.x.17.
 MDB pulls message off of a JMS queue on 16. MDB sends the message to .17 box.
 ON the .17 machine (the receiver) I get the following exception
 weblogic.transaction.internal.CoordinatorImpl@31406b>
 java.lang.SecurityException: Authentication for user system denied in realm wl_realm
 at weblogic.security.acl.Realm.authenticate(Realm.java:212)
 at weblogic.security.acl.Realm.getAuthenticatedName(Realm.java:233)
 at weblogic.security.acl.internal.Security.authenticate(Security.java:125)
 at weblogic.security.acl.internal.Security.verify(Security.java:87)
 at weblogic.rmi.internal.BasicRequestHandler.handleRequest(BasicRequestHandler.java:76)
 at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:17)
 at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
 ON the sending maching .16, I get the following exception.
 ####<Apr 3, 2002 9:46:24 AM CST> <Error> <RJVM> <testweblogic> <OptiSoftAppServer>
 <ExecuteThread: '96' for queue: 'default'> <> <> <000000> <Unsolicited error response
 for: '-1'>
 The messages appear to show up on the destination machine, but are these error
 messages valid, or just bogus?
 Thanks,
 Eric.


Why is that? Your suggestion worked but I don't understand why.
 When our MDB on machineA did the JNDI lookup to MachineB we set the
 credentials to a valid user/password on MachineB.
 My speculation: Since the MDB on machineA is already in a transaction
 any other JNDI calls use the credentials for the MDB's transactions,
 ignoring any other credentials we might try to set explicitly. If my
 speculation is correct then that would explain by the passwords for the
 user "system" would have to be the same between servers.
 Is there a good place to read up on this?
 Thanks
 Tom
 Rajesh Mirchandani wrote:
 > Make sure you have the same system password for the 2 instances of WLS on seperate boxes.
 >
 > Tom Barnes wrote:
 >
 >
 >>Or post to the EJB newsgroup (which "owns" MDBs).
 >>
 >>Tom Barnes wrote:
 >>
 >>
 >>>I think there is a username/password field configurable in the MDB descriptor that
 >>>might help here??? Other than that, I suggest posting to the security newsgroup.
 >>>
 >>>Tom
 >>>
 >>>Eric Babin wrote:
 >>>
 >>>
 >>>>Getting this security exception when trying to pull a message from one weblogic
 >>>>instance JMS queue, and sending the message (via a MDB) to another machine's JMS
 >>>>queue.
 >>>>
 >>>>Ex. Here's the scenario.
 >>>>
 >>>> Two Windows2000Server machines,
 >>>> one at ip ... xxx.xxx.x.16,
 >>>> second machine at ... xxx.xxx.x.17.
 >>>>
 >>>> MDB pulls message off of a JMS queue on 16. MDB sends the message to .17 box.
 >>>>
 >>>>
 >>>>ON the .17 machine (the receiver) I get the following exception
 >>>>
 >>>>weblogic.transaction.internal.CoordinatorImpl@31406b>
 >>>>java.lang.SecurityException: Authentication for user system denied in realm wl_realm
 >>>> at weblogic.security.acl.Realm.authenticate(Realm.java:212)
 >>>> at weblogic.security.acl.Realm.getAuthenticatedName(Realm.java:233)
 >>>> at weblogic.security.acl.internal.Security.authenticate(Security.java:125)
 >>>> at weblogic.security.acl.internal.Security.verify(Security.java:87)
 >>>> at weblogic.rmi.internal.BasicRequestHandler.handleRequest(BasicRequestHandler.java:76)
 >>>> at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:17)
 >>>> at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
 >>>> at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
 >>>>
 >>>>ON the sending maching .16, I get the following exception.
 >>>>
 >>>>####<Apr 3, 2002 9:46:24 AM CST> <Error> <RJVM> <testweblogic> <OptiSoftAppServer>
 >>>><ExecuteThread: '96' for queue: 'default'> <> <> <000000> <Unsolicited error response
 >>>>for: '-1'>
 >>>>
 >>>>The messages appear to show up on the destination machine, but are these error
 >>>>messages valid, or just bogus?
 >>>>
 >>>>Thanks,
 >>>>
 >>>>Eric.
 >>>>
 >
 > --
 > Rajesh Mirchandani
 > Developer Relations Engineer
 > BEA Support
 >
 >
 >

Weblogic.security.SecurityInitializationException: Authentication for user system denied

Reason: weblogic.security.SecurityInitializationException: Authentication for user system denied
I tried my user name.But server didn't start.PLz help me and tell me what i have to do.
Thanks

Hi,
The admin server is also able to start the managed server. The easiest way is
to use a script. The command of starting a managed server is not much different
from the one for the admin server. Just make sure that you reference the admin
server URL (eg. http://localhost:7001). The more production environment way of
managing managed server is to use the notemanger. See the admin guide for more
infos.
Which version are you using?
Kai
"hari" <[email protected]> wrote:
>
Hi!Kai..
I tried with system/weblogic....but same error.Actually i created domain
and managed
server in existing domain throgh config.sh
But the admin server is running properly.But the manager is not starting,user
authentication problem is coming.When i was created domain..i created
a user.I
started admin server with that user...but manged server is not starting.Plz
help
me.

Java.lang.SecurityException: Authentication for user system denied in realm weblogic

I am looking for some help to deploy the application in weblogic6.0.
This is what i did during the application deployment.
Create a new directory under config as a new application.
D:\bea\wlserver6.0\config\test
under test created two other directories applications and logs.
Under the applications directory copied .ear and .war files.
Under the test i copied config.xml, all the *.pem starttest.cmd, fileRealam.properties
files. Modified the config.xml with my application, domain and the server. Modified
the settest.cmd with the new domain and server name.
when i do startup, it is prompting for the password and i entered what ever i mentioned
during the installation.
And getting the following error.
Thanks alot for any suggestions.
D:\bea\wlserver6.0\config\test>startTest.cmd
D:\bea\wlserver6.0>set PATH=.\bin;D:\bea\jdk130\bin;C:\RATIONAL\RATION~1\NUTCROO
T\bin;C:\RATIONAL\RATION~1\NUTCROOT\bin\x11;C:\RATIONAL\RATION~1\NUTCROOT\mksnt;
C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem;C:\Program Files\Dell\Resoluti
on Assistant\Common\bin;C:\PROGRA~1\MICROS~4\Office;C:\PROGRA~1\ULTRAE~1;C:\Rati
onal\common;C:\Rational\Rational Test;C:\jdk1.3\bin;C:\Ant\bin;
D:\bea\wlserver6.0>set CLASSPATH=.;.\lib\weblogic_sp.jar;.\lib\weblogic.jar
D:\bea\wlserver6.0>D:\bea\jdk130\bin\java -hotspot -ms64m -mx64m -classpath .;.\
lib\weblogic_sp.jar;.\lib\weblogic.jar -Dweblogic.Domain=test -Dweblogic.Name=te
stServer -Dbea.home=D:\bea -Dcloudscape.system.home=./samples/eval/cloudscape/da
ta -Djava.security.policy==D:\bea\wlserver6.0/lib/weblogic.policy weblogic.Serve
r
Enter password to boot weblogic server:password
Starting WebLogic Server ....
<Feb 14, 2001 12:13:04 PM EST> <Notice> <Management> <Loading configuration file
.\config\test\config.xml ...>
<Feb 14, 2001 12:13:06 PM EST> <Info> <Logging> <Only log messages of severity "
Error" or worse will be displayed in this window. This can be changed at Admin C
onsole> test> Servers> testServer> Logging> Debugging> Stdout severity threshold
>
<Feb 14, 2001 12:13:08 PM EST> <Emergency> <Server> <Unable to initialize the se
rver: 'Fatal initialization exception
Throwable: java.lang.SecurityException: Authentication for user system denied in
realm weblogic
java.lang.SecurityException: Authentication for user system denied in realm webl
ogic
at weblogic.security.acl.Realm.authenticate(Realm.java:209)
at weblogic.security.acl.Realm.getAuthenticatedName(Realm.java:229)
at weblogic.security.acl.internal.Security.authenticate(Security.java:11
3)
at weblogic.security.SecurityService.initializeSuid(SecurityService.java
:293)
at weblogic.security.SecurityService.initialize(SecurityService.java:123
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:343)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:169)
at weblogic.Server.main(Server.java:35)
'>
The WebLogic Server did not start up properly.
Exception raised: java.lang.SecurityException: Authentication for user system de
nied in realm weblogic
java.lang.SecurityException: Authentication for user system denied in realm webl
ogic
at weblogic.security.acl.Realm.authenticate(Realm.java:209)
at weblogic.security.acl.Realm.getAuthenticatedName(Realm.java:229)
at weblogic.security.acl.internal.Security.authenticate(Security.java:11
3)
at weblogic.security.SecurityService.initializeSuid(SecurityService.java
:293)
at weblogic.security.SecurityService.initialize(SecurityService.java:123
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:343)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:169)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
D:\bea\wlserver6.0>goto finish
D:\bea\wlserver6.0>cd config\test
D:\bea\wlserver6.0\config\test>ENDLOCAL
D:\bea\wlserver6.0\config\test>

Seen this, may give a clue?
Server Known Problems Change Request Number Description
042556
The weblogic.Admin command now requires the user and password options. For example:
java weblogic.Admin -username system -password gumby1234
The username "system" is required for most functions (for example: VERSION). If
you do not specify -username system, you will get the following error:
Exception in thread "main" java.lang.SecurityException: Authentication for user
system denied in realm weblogic
<<no stack trace available>>
"lazar" <[email protected]> wrote:
>
I would also like to know, if there is a fix for it.
Thanks
Lazar
Greg Layton <[email protected]> wrote:
Did you ever get an answer to this. If so could you share it with me.ThanksGreg

Java.lang.SecurityException: Authentication for user system denied in realm wl_realm

I am experiencing this error when a servlet or JSP is preloaded on the web
server and the init method of the preloaded item results in a call to the
app server. If I don't preload and then manually invoke the JSP or servlet
after the web server completely loads the call to the app server does not
produce the exception. The only security differences between the web and
app servers are the console and system passwords. I can fix the problem by
making the passwords (system and console) the same across the board, but
find it hard to believe that this is the true solution. I would prefer
sticking with the default security settings.
I've poured through hundreds of messages. I can find similar problems but
not this exact problem.
Any ideas would truly be appreciated!
More information:...
App and Web server are both wls 6.1.1.0 running on the same SUN Solaris box.
Both are using the basic, out of the box, security.
The App server has SSL disabled.
The exception reported in the app server's log is:
java.lang.SecurityException: Authentication for user system denied in realm
wl_realm
at weblogic.security.acl.Realm.authenticate(Realm.java:212)
at weblogic.security.acl.Realm.getAuthenticatedName(Realm.java:233)
at
weblogic.security.acl.internal.Security.authenticate(Security.java:125)
at weblogic.security.acl.internal.Security.verify(Security.java:87)
at
weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:235)
at
weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:2
2)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
The exception reported in the web server's log is:
java.lang.SecurityException: Authentication for user system denied in realm
wl_realm
at
weblogic.rmi.internal.BasicOutboundRequest.sendReceive(BasicOutboundRequest.
java:85)
at
weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java
:255)
at
weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java
:222)
at weblogic.rmi.internal.ProxyStub.invoke(ProxyStub.java:35)
at $Proxy54.lookup(Unknown Source)
at
weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:323)
at javax.naming.InitialContext.lookup(InitialContext.java:350)
at
com.qwest.tmmt.manager.client.MDMAdapter.getEJBHome(MDMAdapter.java:197)
at
com.qwest.tmmt.manager.client.MDMAdapter.<init>(MDMAdapter.java:64)
at
com.qwest.tmmt.manager.client.ManagerFactory.createMetaDataManager(ManagerFa
ctory.java:305)
at
com.qwest.insite.util.ClientMetaDataCache.<init>(ClientMetaDataCache.java:53
at
com.qwest.insite.util.ClientMetaDataCache.getInstance(ClientMetaDataCache.ja
va:106)
at
com.qwest.insite.metadata.startup.MetaDataServlet.init(MetaDataServlet.java:
30)
at
weblogic.servlet.internal.ServletStubImpl.createServlet(ServletStubImpl.java
:700)
at
weblogic.servlet.internal.ServletStubImpl.createInstances(ServletStubImpl.ja
va:643)
at
weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.jav
a:588)
at
weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletC
ontext.java:2203)
at
weblogic.servlet.internal.WebAppServletContext.preloadServlets(WebAppServlet
Context.java:2147)
at
weblogic.servlet.internal.WebAppServletContext.init(WebAppServletContext.jav
a:884)
at
weblogic.servlet.internal.WebAppServletContext.<init>(WebAppServletContext.j
ava:807)
at
weblogic.servlet.internal.HttpServer.loadWebApp(HttpServer.java:421)
at weblogic.j2ee.WebAppComponent.deploy(WebAppComponent.java:74)
at weblogic.j2ee.Application.addComponent(Application.java:160)
at weblogic.j2ee.J2EEService.addDeployment(J2EEService.java:117)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentT
arget.java:329)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentT
arget.java:144)
at
weblogic.management.mbeans.custom.WebServer.addWebDeployment(WebServer.java:
76)
at java.lang.reflect.Method.invoke(Native Method)
at
weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl
.java:608)
at
weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:5
92)
at
weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBea
nImpl.java:352)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:449)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:190)
at $Proxy33.addWebDeployment(Unknown Source)
at
weblogic.management.configuration.WebServerMBean_CachingStub.addWebDeploymen
t(WebServerMBean_CachingStub.java:1094)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentT
arget.java:315)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(Deployment
Target.java:279)
at
weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeployments(D
eploymentTarget.java:233)
at
weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(Deploym
entTarget.java:193)
at java.lang.reflect.Method.invoke(Native Method)
at
weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl
.java:608)
at
weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:5
92)
at
weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBea
nImpl.java:352)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:449)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:190)
at $Proxy32.updateDeployments(Unknown Source)
at
weblogic.management.configuration.ServerMBean_CachingStub.updateDeployments(
ServerMBean_CachingStub.java:2734)
at
weblogic.management.mbeans.custom.ApplicationManager.startConfigManager(Appl
icationManager.java:362)
at
weblogic.management.mbeans.custom.ApplicationManager.start(ApplicationManage
r.java:154)
at java.lang.reflect.Method.invoke(Native Method)
at
weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl
.java:608)
at
weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:5
92)
at
weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBea
nImpl.java:352)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:449)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:190)
at $Proxy45.start(Unknown Source)
at
weblogic.management.configuration.ApplicationManagerMBean_CachingStub.start(
ApplicationManagerMBean_CachingStub.java:480)
at
weblogic.management.Admin.startApplicationManager(Admin.java:1151)
at weblogic.management.Admin.finish(Admin.java:570)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:506)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:203)
at weblogic.Server.main(Server.java:35)
Thanks,
Jed Zimmer

You're correct. I meant the DOMAIN_SYSTEM_PASSWORD password in my
<domain-name>domain.ksh file. The DOMAIN_SYSTEM_PASSWORD value (if
specified) has to match the system user's password or else the server will
not start/stop.
I have determined more since my post. A startup class also produces the
same error. I have minimized my environments as follows and still receive
the exception, and a soon as I synchronize the system users' passwords on
the app/web server the problem goes away. Or, I can keep the passwords
different and just not access the app server EJBs until after the web server
finished loading, which also causes the error to go away. I'm just confused
about what I might be doing wrong.
Steps to produce the error:
App server:
- Installed from 6.1.1.0 from scratch and started it up.
- Changed the system user's password from the admin console, persisting the
changes.
- Modified logging settings to see more info in the log files.
- Disabled instrument stack traces.
- Stopped/Started the app server
Web server:
- Installed from 6.1.1.0 from scratch and started it up.
- Modified logging settings to see more info in the log files.
- Disabled instrument stack traces.
- Added a servlet to the DefaultWebApp_insiteserver application
- specified name and class
- the load on startup setting defaulted to zero, which will cause the
preloading
- Added 3 jar files to the classpath to support the EJB call
- Stopped/Started the web server
When the web server loads the servlet loads and tries to locate the EJB on
the app server. The app server throws the security exception. The app/web
servers are both running on the same SUN box, have the same IP address
(different ports) and I'm using non-SSL. Each server is it's own WLS
environment. The only installed file that is shared it the
weblogic_domain_registry.dat file in the root directory. As for security,
I'm doing nothing except changing one password (system user on the app
server).
I then tried to manually upgrade the app/web servers to 6.1.2.0 by updating
the WEBLOGIC_ROOT in the respective xxxxdomain.ksh files. Same problem.
I then cleanly reinstalled the app/web servers using version 6.1.2.0 and
configured as above. Same problem.
Let me know if I need to provide additional details.
Thanks,
Jed Zimmer
"Joseph Nguyen" <[email protected]> wrote in message
news:[email protected]...
>
"Jed Zimmer" <[email protected]> wrote in message
news:[email protected]...
I am experiencing this error when a servlet or JSP is preloaded on the
web
server and the init method of the preloaded item results in a call tothe
app server. If I don't preload and then manually invoke the JSP orservlet
after the web server completely loads the call to the app server does
not
produce the exception. The only security differences between the weband
app servers are the console and system passwords. I can fix the problemby
making the passwords (system and console) the same across the board, but
find it hard to believe that this is the true solutionI don't quite understand what you mean by "console" password? Are you
talking about the admin console? If so then it's confusing because youhave
to log into the console using the system user. If you can clarify morehere
it would great.
Joseph Nguyen
BEA Support
. I would prefer
sticking with the default security settings.
I've poured through hundreds of messages. I can find similar problems
but
not this exact problem.
Any ideas would truly be appreciated!
More information:...
App and Web server are both wls 6.1.1.0 running on the same SUN Solarisbox.
Both are using the basic, out of the box, security.
The App server has SSL disabled.
The exception reported in the app server's log is:
java.lang.SecurityException: Authentication for user system denied inrealm
wl_realm
at weblogic.security.acl.Realm.authenticate(Realm.java:212)
atweblogic.security.acl.Realm.getAuthenticatedName(Realm.java:233)
at
weblogic.security.acl.internal.Security.authenticate(Security.java:125)
atweblogic.security.acl.internal.Security.verify(Security.java:87)
at
weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:235)
at
weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:2
2)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
The exception reported in the web server's log is:
java.lang.SecurityException: Authentication for user system denied inrealm
wl_realm
at
weblogic.rmi.internal.BasicOutboundRequest.sendReceive(BasicOutboundRequest.
java:85)
at
weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java
:255)
at
weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java
:222)
at weblogic.rmi.internal.ProxyStub.invoke(ProxyStub.java:35)
at $Proxy54.lookup(Unknown Source)
at
weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:323)
at javax.naming.InitialContext.lookup(InitialContext.java:350)
at
com.qwest.tmmt.manager.client.MDMAdapter.getEJBHome(MDMAdapter.java:197)
at
com.qwest.tmmt.manager.client.MDMAdapter.<init>(MDMAdapter.java:64)
at
com.qwest.tmmt.manager.client.ManagerFactory.createMetaDataManager(ManagerFa
ctory.java:305)
at
com.qwest.insite.util.ClientMetaDataCache.<init>(ClientMetaDataCache.java:53
at
com.qwest.insite.util.ClientMetaDataCache.getInstance(ClientMetaDataCache.ja
va:106)
at
com.qwest.insite.metadata.startup.MetaDataServlet.init(MetaDataServlet.java:
30)
at
weblogic.servlet.internal.ServletStubImpl.createServlet(ServletStubImpl.java
:700)
at
weblogic.servlet.internal.ServletStubImpl.createInstances(ServletStubImpl.ja
va:643)
at
weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.jav
a:588)
at
weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletC
ontext.java:2203)
at
weblogic.servlet.internal.WebAppServletContext.preloadServlets(WebAppServlet
Context.java:2147)
at
weblogic.servlet.internal.WebAppServletContext.init(WebAppServletContext.jav
a:884)
at
weblogic.servlet.internal.WebAppServletContext.<init>(WebAppServletContext.j
ava:807)
at
weblogic.servlet.internal.HttpServer.loadWebApp(HttpServer.java:421)
at weblogic.j2ee.WebAppComponent.deploy(WebAppComponent.java:74)
at weblogic.j2ee.Application.addComponent(Application.java:160)
at weblogic.j2ee.J2EEService.addDeployment(J2EEService.java:117)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentT
arget.java:329)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentT
arget.java:144)
at
weblogic.management.mbeans.custom.WebServer.addWebDeployment(WebServer.java:
76)
at java.lang.reflect.Method.invoke(Native Method)
at
weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl
.java:608)
at
weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:5
92)
at
weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBea
nImpl.java:352)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:449)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:190)
at $Proxy33.addWebDeployment(Unknown Source)
at
weblogic.management.configuration.WebServerMBean_CachingStub.addWebDeploymen
t(WebServerMBean_CachingStub.java:1094)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentT
arget.java:315)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(Deployment
Target.java:279)
at
weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeployments(D
eploymentTarget.java:233)
at
weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(Deploym
entTarget.java:193)
at java.lang.reflect.Method.invoke(Native Method)
at
weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl
.java:608)
at
weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:5
92)
at
weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBea
nImpl.java:352)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:449)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:190)
at $Proxy32.updateDeployments(Unknown Source)
at
weblogic.management.configuration.ServerMBean_CachingStub.updateDeployments(
ServerMBean_CachingStub.java:2734)
at
weblogic.management.mbeans.custom.ApplicationManager.startConfigManager(Appl
icationManager.java:362)
at
weblogic.management.mbeans.custom.ApplicationManager.start(ApplicationManage
r.java:154)
at java.lang.reflect.Method.invoke(Native Method)
at
weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl
.java:608)
at
weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:5
92)
at
weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBea
nImpl.java:352)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:449)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:190)
at $Proxy45.start(Unknown Source)
at
weblogic.management.configuration.ApplicationManagerMBean_CachingStub.start(
ApplicationManagerMBean_CachingStub.java:480)
at
weblogic.management.Admin.startApplicationManager(Admin.java:1151)
at weblogic.management.Admin.finish(Admin.java:570)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:506)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:203)
at weblogic.Server.main(Server.java:35)
Thanks,
Jed Zimmer

Javax.naming.AuthenticationException. Root exception is java.lang.SecurityException: Authentication for user system denied in realm weblogic

We have started getting the above error message in a system that has worked happily
for the past 6 months or so (and continues to work happily from our disaster recovery
environment). I should probably add that this occurs when we are attempting to
write to the database via the connection pool.
Anyone have any ideas?
Thanks
Andrew
The full stack trace is
javax.naming.AuthenticationException. Root exception is java.lang.SecurityException:
Authentication for user system denied in realm weblogic
 <<no stack trace available>>
31-Jan-02 00:04:41 GMT Warning Adapter RuntimeException
thrown by rmi server(class com.esure.ibis.a
ccesslayer.sb.useraccess.UserAccessBeanEOImpl)
[265127279722
6064825S:hfxesure17:[7005,7005,7002,7002,7005,7002,-1]:esure
prdwls/296]: [BaseEJBObject]
home: com.esure.ibis.accesslaye
r.sb.useraccess.UserAccessBeanHomeImpl@4b741e
com.esure.ibis.util.IbisException: NamingException occurred in UserAccess Session
Bean::validateUser()
 at com.esure.ibis.accesslayer.sb.useraccess.UserAccessBean.validateUser(UserAccessBean.java:192)
 at com.esure.ibis.accesslayer.sb.useraccess.UserAccessBeanImpl.validateUser(UserAccessBeanImpl.java:110)
 at com.esure.ibis.accesslayer.sb.useraccess.UserAccessBeanEOImpl.validateUser(UserAccessBeanEOImpl.java:31)
 at com.esure.ibis.accesslayer.sb.useraccess.UserAccessBeanEOImpl_WLSkel.invoke(UserAccessBeanEOImpl_WLSkel.java:202)
 at weblogic.rmi.internal.BasicServerAdapter.invoke(BasicServerAdapter.java:373)
 at weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.java:128)
 at weblogic.rmi.internal.BasicServerAdapter.invoke(BasicServerAdapter.java:237)
 at weblogic.rmi.internal.BasicRequestHandler.handleRequest(BasicRequestHandler.java:118)
 at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:17)
 at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)

We have started getting the above error message in a system that has worked happily
for the past 6 months or so (and continues to work happily from our disaster recovery
environment). I should probably add that this occurs when we are attempting to
write to the database via the connection pool.
Anyone have any ideas?
Thanks
Andrew
The full stack trace is
javax.naming.AuthenticationException. Root exception is java.lang.SecurityException:
Authentication for user system denied in realm weblogic
 <<no stack trace available>>
31-Jan-02 00:04:41 GMT Warning Adapter RuntimeException
thrown by rmi server(class com.esure.ibis.a
ccesslayer.sb.useraccess.UserAccessBeanEOImpl)
[265127279722
6064825S:hfxesure17:[7005,7005,7002,7002,7005,7002,-1]:esure
prdwls/296]: [BaseEJBObject]
home: com.esure.ibis.accesslaye
r.sb.useraccess.UserAccessBeanHomeImpl@4b741e
com.esure.ibis.util.IbisException: NamingException occurred in UserAccess Session
Bean::validateUser()
 at com.esure.ibis.accesslayer.sb.useraccess.UserAccessBean.validateUser(UserAccessBean.java:192)
 at com.esure.ibis.accesslayer.sb.useraccess.UserAccessBeanImpl.validateUser(UserAccessBeanImpl.java:110)
 at com.esure.ibis.accesslayer.sb.useraccess.UserAccessBeanEOImpl.validateUser(UserAccessBeanEOImpl.java:31)
 at com.esure.ibis.accesslayer.sb.useraccess.UserAccessBeanEOImpl_WLSkel.invoke(UserAccessBeanEOImpl_WLSkel.java:202)
 at weblogic.rmi.internal.BasicServerAdapter.invoke(BasicServerAdapter.java:373)
 at weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.java:128)
 at weblogic.rmi.internal.BasicServerAdapter.invoke(BasicServerAdapter.java:237)
 at weblogic.rmi.internal.BasicRequestHandler.handleRequest(BasicRequestHandler.java:118)
 at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:17)
 at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)

Authentication for user system denied in realm weblogic

hi,am using Web Logic 6.1 on hp and all works fine, I've a cron which kicks off
every morn.
This cron stops the web logic app server (admin server), then starts it. The stopping
is done with a shutdown.sh script. I've noticed all the posts here about "Authentication
for user system denied in realm weblogic" seem to be in code. This is diff as
it's on shutdown.
My shutdown script does the below:
#!/bin/sh
JAVA_HOME=/opt/weblogic6.1/jdk131
WL_HOME=/opt/weblogic6.1/wlserver6.1
CLASSPATH=$WL_HOME/lib/weblogic_sp.jar:$WL_HOME/lib/weblogic.jar
JAVA_RUN="${JAVA_HOME}/bin/java -classpath ${CLASSPATH}"
WLS_PW=try_abc
RUNCMD="${JAVA_RUN} weblogic.Admin -url localhost:9100 SHUTDOWN -username system
-password $WLS_PW"
echo $RUNCMD
$RUNCMD
When it's run the below is printed. Any help appreciated on this!!
/opt/weblogic6.1/jdk131/bin/java -classpath /opt/weblogic6.1/wlserver6.1/lib/weblogic_sp.jar:/opt/weblogic6.1/wlserver6.1/lib/webl
ogic.jar weblogic.Admin -url localhost:9100 SHUTDOWN -username system -password
admin2001
Authentication for user system denied in realm weblogic
Start server side stack trace:
java.lang.SecurityException: Authentication for user system denied in realm weblogic
at weblogic.security.acl.Realm.authenticate(Realm.java:195)
at weblogic.security.acl.Realm.getAuthenticatedName(Realm.java:233)
at weblogic.security.acl.internal.Security.authenticate(Security.java:125)
at weblogic.kernel.BootServicesImpl.authenticate(BootServicesImpl.java:119)
at weblogic.kernel.BootServicesImpl.findOrCreateClientContext(BootServicesImpl.java:203)
at weblogic.kernel.BootServicesImpl.invoke(BootServicesImpl.java:148)
at weblogic.rjvm.RJVMImpl.dispatchRequest(RJVMImpl.java:620)
at weblogic.rjvm.RJVMImpl.dispatch(RJVMImpl.java:581)
at weblogic.rjvm.ConnectionManagerServer.handleRJVM(ConnectionManagerServer.java:164)
at weblogic.rjvm.ConnectionManager.dispatch(ConnectionManager.java:640)
at weblogic.rjvm.t3.T3JVMConnection.dispatch(T3JVMConnection.java:454)
at weblogic.socket.PosixSocketMuxer.deliverGoodNews(PosixSocketMuxer.java:456)
at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:385)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
End server side stack trace

This is the way it should be. You should not be able to call from one server into
another using the system user without having to provide a password.
Yeshwant <[email protected]> wrote:
>
Hi Jose
What version of the server are you using . In 6.x this is a known issue
The workaround as you mention is to have the same password for the system
user.
Jose Perez wrote:
Hi all,
I'm having problems when communicating 2 EJBs in different weblogic Serverinstances,
one acts as a "client" and the other as a "server".
The exception is "Authentication for user system denied in realm weblogic".This
only happens if the user system has different password in each server.
Any idea?
Thanks in advance

User "System" loced

Similar Messages

Maybe you are looking for