Userexit not getting triggered for 0CFM_CLASS_MASTER_DATA_ATTR

Hi Experts,
I have made enhancements to 0CFM_CLASS_MASTER_DATA_ATTR & 0CFM_FI_TRA_ATTR in RSAP0001(EXIT_SAPLRSAP_001). I have set the flag to New Data entry logic(Switch for Datasource feed) to populate the Timedependent attributes in 0CFM_CLASS_MASTER_DATA_ATTR .
I kept the break point in the Userexit and ran RSA3 for the above 2 datasources but the user exit is not getting triggered.
Can you please help why the userexit is not getting triggered?
Thanks,
bwuswer14.

Hi,
Thanks for ur post.issue resolved.im keeping the breakpoint in 1st user exit.After keeping the breakpoint in EXIT_SAPLRSAP_002 it got triggered.Closing the thread.
Thanks,
bwuser14

Similar Messages

Output type is not getting triggered for ship to party in shippment output

Hi,
we have maintained output determination procedure for shipments. It was working fine.
We have just added new condition table to access sequence, and maintained the condition records also for condition type ZABC. I have checked in NACE, Application V7, I am able to find the condition type. checked in VV73, condition records displayed. But in VT02N/VT03N, we are unable to get print for the output type.
Why this is happening? we are able to see the procedure, condition type, access sequence, condition records in place ...why condition type ZABC is not getting triggered in the shipment output.
Please advise and let me know if you need more details....thanks in advance.
Thanks,
SS

Hi Noel,
Thanks for your time and reply.
We have output determination procedure for shipments, condition type ZABC, Access sequence ZABC, Condition tables 550,600,650,700 already maintained. output is working fine.we have a new requirement and created new condition table 700 with the fields" Ship to party and transportation planing point "(Condition table 700 ). we assigned the condition table 700 to access sequence ZABC. Condition type ZABC already placed in Output determination procedure.
We test the output, new condition record is not triggering in the output, even in output determination analysis also, we are unable to see the record 700 for the condition type ZABC. we are not sure what is the reason for the condition table that is not picking up ? Why condition type ZABC with condition record 700 not visible in output determination analysis.
I have checked condition records, output determination procedure. Please advise and let me know you need more details.
Thanks,
SS

Event not getting triggered for a few users in production

Hi Experts!!
We have a workflow that gets triggered on the event REQUESTCREATED of BUS2089. In production, we see that for a few users the event is getting triggered and even the workflow is. But for a few users, the workflow is not getting triggered. However, we didn't check SWEQADM yet and are waiting to get auth to check the same. But before that, I need your valuable suggestions on this.
When I check SWEL, I cannot see any entries at all. Not even for the successfully processed ones.
Auth objects cannot be a reason, as all the users have same auth. Please suggest me on what else can be the reasons.
Your help is highly appreciable.

Hello Srinivas !
              Check in SWEQADM to know whether the event is on queue.If so, redeliver it.
              If there is no event on queue, check the RFC queue( transaction SWU2 ) and ST22 for possible ABAP dumps.
              Call work item list report (transaction SWI1) and check event linkages (transaction SWETYPV )of the users for whom the event is not triggered.Are you using BAdI or user- exit to trigger the workflow ? If so, check whether those are in active state.
             Refresh the workflow buffers(transaction SWU_OBUF).Check either of the workflow versions are in active state.
Regards,
S.Suresh

Event not getting triggered for PR generated through MRP run

Hi All,
Could anyone let me know how to get a workflow triggered for the ReleaseStepCreated event (obj - bus2105) when the PR is created through MRP run. The MD02 control paramters have the value '1'.
Interstingly the workflow triggers when the value is set to '2' or '3'.
Thanks,
Ameekar

Thanks Aman,
I checked field restrictions but there are none there. Actually i checked them for other object 'AOOMARA' which is being thrown as an exception when i am creating the PR through MRP run.
Exception says -> field not maintained.
So i guess, i need to maintain the field for Change Document but i am not sure how. COuld you please aid me with that.
Thanks A lot !!

'Releasestepcreated' not getting triggered for PR generated through MRP run

Hi,
I have PR Release strategy workflow configured, working well when i try to create PR manually, triggers workflow.
PR's created thorugh MRP run, triggers release strategy but not workflow.
I checked the event trace 'releasestepcreated' event not triggered through MRP run.
Please respond ASAP.
Your inputs will be highly appreciated.

Short Text
Workflow with multiple workitems
Long Text
Refering SAP notes that i came to know that workflow is not supported
through MRP run (md03/md04).we are not using Planned orders.
To trigger workflow for Purchase requisitions created by MRP run, we
have developed a custom report to trigger workflow explicitly.
1.MRP batch job runs every night. After MRP job,planned to schedule
another job to trigger workflow for PR's created MRP run.
2. Used FM 'SAP_WAPI_CREATE_EVENT' to trigger workflow.
3. PR requires 5 levels of approvals based on release strategy
configuration.
4. The issue is PR 'XXX' created and waiting for approval in agent's
inbox.When 2nd day MPR runs same PR 'XXX' effected, another
workitem for the same PR in agent's inbox.
We have multiple workitems for the same PR in agent's Inbox.
If i execute one of the workitem,releases PR, multiple workitems are
getting generated for 2nd level approval for the same PR.
Please give your inputs to resolve this issue.

Alerts not getting triggered for invalid receiver receiver

Hello,
My scenario is IDoc to HTTP.I have defined alert rules for my scenario.
I have condition mentioned in receiver determination.Depending on vendor number data is sent to corresponding receiver.
But when i send IDoc is sent with invalid vendor number,it is failing in XI system with error as :No receiver could be determined but not alert is being thrown or triggered.
Same situation is working in Dev and quality but not in production.
I ahve checked the alert rules thorughly in all the 3 environments and they are all perfe

does the error"RCVR_DETERMINATION.NO_RECEIVER_CASE_ASYNC" gets triggered only when reciever service is not
mentioned in alert rule condition?
This error gets triggered when no receiver matching with the mentioned Condition is found.....the Condition in Receiver Determination OR if no receiver service exists.
I hope you have created a rule in Alert Rule section of RWB and have unchecked the Suppress Multiple Alerts options.
When you get the above error in SXMB_MONI you should get an alert
Regards,
Abhishek.

Job not getting triggered for Multiple Scheduler Events

hi,
I would like a job to be triggered for multiple scheduler events, subscribing to a single event works fine. But, when I set multiple event condition, nothing works.
My objective is to run a job, whenever job starts or restarts or exceeds max run duration.
Note : Is it possible to trigger a job, when a job RESTARTS by subscribing to JOB_START ????????
procedure sniffer_proc(p_message in sys.scheduler$_event_info)
is
--Code
end sniffer_proc
dbms_scheduler.create_program(program_name => 'PROG',
program_action => 'sniffer_proc',
program_type => 'stored_procedure',
number_of_arguments => 1,
enabled => false);
-- Define the meta data on scheduler event to be passed.
dbms_scheduler.define_metadata_argument('PROG',
'event_message',1);
dbms_scheduler.enable('PROG');
dbms_scheduler.create_job
('JOB',
program_name => 'PROG',
* event_condition => 'tab.user_data.event_type = ''JOB_OVER_MAX_DUR''' ||*
*' or tab.user_data.event_type = ''JOB_START''',*
queue_spec => 'sys.scheduler$_event_queue,auagent',
enabled => true);
I tried this too...
dbms_scheduler.create_job
('JOB',
program_name => 'PROG',
* event_condition => 'tab.user_data.event_type = ''JOB_OVER_MAX_DUR''' ||*
*' and tab.user_data.event_type = ''JOB_START''',*
queue_spec => 'sys.scheduler$_event_queue,auagent',
enabled => true);
Need help
Thanks...
Edited by: user602200 on Dec 28, 2009 3:00 AM
Edited by: user602200 on Dec 28, 2009 3:03 AM

Hi,
Here is complete code which I tested on 10.2.0.4 which shows a second job that runs after a first job starts and also when it has exceeded its max run duration. It doesn't have the condition but just runs on every event raised, but the job only raises the 2 events.
Hope this helps,
Ravi.
-- run a job when another starts and exceeds its max_run_duration
set pagesize 200
-- create a user just for this test
drop user test_user cascade;
grant connect, create job, create session, resource,
create table to test_user identified by test_user ;
connect test_user/test_user
-- create a table for output
create table job_output (log_date timestamp with time zone,
        output varchar2(4000));
-- add an event queue subscriber for this user's messages
exec dbms_scheduler.add_event_queue_subscriber('myagent')
-- create the first job and have it raise an event whenever it completes
-- (succeeds, fails or stops)
begin
dbms_scheduler.create_job
   ( 'first_job', job_action =>
     'insert into job_output values(systimestamp, ''first job runs'');'||
     'commit; dbms_lock.sleep(70);',
    job_type => 'plsql_block',
    enabled => false, repeat_interval=>'freq=secondly;interval=90' ) ;
dbms_scheduler.set_attribute ( 'first_job' , 'max_runs' , 2);
dbms_scheduler.set_attribute
    ( 'first_job' , 'raise_events' , dbms_scheduler.job_started);
dbms_scheduler.set_attribute ( 'first_job' , 'max_run_duration' ,
    interval '60' second);
end;
-- create a simple second job that runs when the first starts and after
-- it has exceeded its max_run_duration
begin
dbms_scheduler.create_job('second_job',
                            job_type=>'plsql_block',
                            job_action=>
    'insert into job_output values(systimestamp, ''second job runs'');',
                            event_condition =>
   'tab.user_data.object_name = ''FIRST_JOB''',
                            queue_spec =>'sys.scheduler$_event_queue,myagent',
                            enabled=>true);
end;
-- this allows multiple simultaneous runs of the second job on 11g and up
begin
$IF DBMS_DB_VERSION.VER_LE_10 $THEN
    null;
$ELSE
    dbms_scheduler.set_attribute('second_job', 'parallel_instances',true);
$END
end;
-- enable the first job so it starts running
exec dbms_scheduler.enable('first_job')
-- wait until the first job has run twice
exec dbms_lock.sleep(180)
select * from job_output;

Alerts not getting Triggered for Integration Engine Error

Hi,
We are configuring Alert Framework in our project. Here when the scenario fails at communication channel we receive alerts but when it fails in message mapping we aren't getting any alerts.
Below are the settings:
Alert rule created with no restrictions (Sender: * Receiver: *)
Where did error occur ? No restriction
Suppress multiple alerts of this Rule : Not set
It would be great if some would help us on this.
Regards,
Tejas

If you have created separate alert categories then test you alert as described later in this post. Else create a new alert category for your IE level exceptions. Give a description, long text, add your sap id in the fixed recipient list. Make sure you have ur email id configured for ur sap id in SU01. Create a rule in RWB. Make sure that you click on the "Add rule" tab once done. Keep all the entries as default. Give a description, remove suppress multiple alerts ,for now, keep rule active checkbox as checked, where did error occur- choose IE both stars.
Now we need to test if this alert category is working fine. Go to se38 and execute RSALERTTEST. There give the name of your alert category. Execute. Now check in the ALRTDISP, if you get an entry there. Let me know....

ALERT not getting triggered for messages in error in adapter engine

Hi All,
I am doing the same scenario where I have created two Alert category Alert_cat1 and Alert_cat2, both are similar but one i have created for error in integration engine(Alert_cat1 ) and other for adapter engine(Alert_cat2).
Now for Alert_cat1 i have created a rule and in the setting "where did the error occur" I have given no restriction.
Now for Alert_cat2,as discussed in the above blog I have created many rule each for various adapter.
I have tested it, above mentioned configuration is working for message mapping error (sxmb_moni)
but not for any error in adapter engine for messages in waiting or system erroe status.
Kindly suggest where I am going wrong.
Regards
Shefali S

HI,
please refer this below blog:
Does Alerts work for Integrated configurations scenario??
thanks,

Keychain not getting triggered for ssh after 10.5.6?

I've had passwordless SSH going for some time now using these instructions
http://www.mactips.org/archives/2007/12/20/using-passwordless-ssh-the-easy-guide -leopard-only/
but it stopped working today. Here are some details I think might be important:
1) Both machines (iMac and MacBook) were upgraded to 10.5.6 today from 10.5.5
2) I have repaired permissions on both machines.
3) I have repaired the keychain on both machines.
4) I have re-created the keys using the instructions above and a clean ~/.ssh/
5) Deleted the old 'ssh' entry in Keychain Access.
From all I can gather, whatever program is supposed to jump in and ask to save my passphrase into the Keychain isn't doing so.
I have an instance of '/usr/bin/ssh-agent -l' showing in 'ps' after doing:
$ ssh-add -l
The agent has no identities.
I'm stumped.
This worked so easily before, and now it isn't.
I saw in the 10.5.6 release notes that ssh was updated, and I wondered if it had anything to do with that.
Any help appreciated.

One last thing:
SSHAUTHSOCK is reporting back that it has been set.
And I'm using zsh (don't know if that matters).
(OK, two last things

Alerts not getting triggered from Adapter Framework

Hi,
I have done the following steps for the Alerting:-
1. In configuration of RWB, activated monitoring for XI integration server & XIAdapterFramework and set the monitoring level to 'HIGH'.
2. Scheduled the Report 'SXMSALERT_PROCESS_DATA_GET' on ABAP stack.
3. In the 'further settings' link in End-to-End monitoring, activated the monitoring and set the frequency.
4.Created an alert category using t-code 'ALRTCATDEF' and assigned fixed users(myself) to it.
5.Defined an alert rule with '*' in all conditions and 'No restrictions' for the question 'Where did the error occur'.
Finally after all the steps:-
I am able to receive the alerts in the inbox -
a) by running the test report 'RSALERTTEST'
b) from a control step in BPM.
<b>However, alerts are not getting triggered for an error in the Adapter Framework. (an exception in the Adapter Channel)</b>
When i debugged the SXMSALERT_PROCESS_DATA_GET report, there was step where it was looking for process instances in table 'SSPICSPRHD' which was empty and the alert error log said -
<i> No process instances found for process type ID: 26460B43EB934C4C9ABBE9627380A89E ( XIDomain: domain.00.hqdvsapxi01 )</i>
Any help/hint is welcome !!!
Thanks & Regards,
Renjith.

Hi,
https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/pub/wlg/1382. [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
I think this blog will be of help to you..
Cheers,
Divya

Plugin events not getting triggered

Hello,
APEX version 4.1.0.00.32 and 4.2.3.00.08
Browser: latest version of Chrome browser
I'm trying to include plugin events for the Select2 APEX plugin but facing one rather annoying issue; the dynamic actions based on the plugin events are not getting triggered. These are the steps I have taken:
1. Registered several events with the plugin (e.g. slctchange, slctopen, slcthighlight, etc.). These events are based on the official Select2 documentation.
2. Modified the render function to include event handlers that trigger the appropriate Select2 event.
$("' || l_item_jq || '").on("change", function(e) {
apex.jQuery(this).trigger("slctchange", { val:e.val, added:e.added, removed:e.removed });
$("' || l_item_jq || '").on("select2-opening", function(e) {
apex.jQuery(this).trigger("slctopening");
$("' || l_item_jq || '").on("select2-open", function(e) {
apex.jQuery(this).trigger("slctopen");
$("' || l_item_jq || '").on("select2-highlight", function(e) {
apex.jQuery(this).trigger("slcthighlight", { val:e.val, choice:e.choice });
$("' || l_item_jq || '").on("select2-selecting", function(e) {
apex.jQuery(this).trigger("slctselecting", { val:e.val, choice:e.choice });
$("' || l_item_jq || '").on("select2-clearing", function(e) {
apex.jQuery(this).trigger("slctclearing");
$("' || l_item_jq || '").on("select2-removed", function(e) {
apex.jQuery(this).trigger("slctremoved", { val:e.val, choice:e.choice });
$("' || l_item_jq || '").on("select2-focus", function(e) {
apex.jQuery(this).trigger("slctfocus");
$("' || l_item_jq || '").on("select2-blur", function(e) {
apex.jQuery(this).trigger("slctblur");
I can confirm that the slctchange event (the first event in the list) is working properly both in APEX 4.1 and 4.2. Please note that I had to use apex.jQuery instead of $ to get it to work in 4.1. Might be because I overloaded jQuery in 4.1. Anyway, all others events are not getting triggered for some reason. The event handlers are getting executed for the appropriate event; that's not the problem. I guess the source of the problem lies with the trigger function. It simply doesn't trigger any of my dynamic actions.
To make things even more complicated, it is possible to trigger the events manually in console. So if I execute this statement:
apex.jQuery("#P20_SINGLE_VALUE_NEW").trigger("slctopen");
Then I get back the result from the dynamic action.
I tried a lot of different ways to trigger the plugin event. For example:
$("' || l_item_jq || '").on("select2-open", function(e) {
apex.jQuery(this).trigger("slctopen");
$(this).trigger("slctopen");
apex.jQuery(this).trigger("slctopen.BE_CTB_SELECT2");
$(this).trigger("slctopen.BE_CTB_SELECT2");
apex.jQuery("' || l_item_jq || '").trigger("slctopen");
$("' || l_item_jq || '").trigger("slctopen");
apex.jQuery("' || l_item_jq || '").trigger("slctopen.BE_CTB_SELECT2");
$("' || l_item_jq || '").trigger("slctopen.BE_CTB_SELECT2");
Nothing gets triggered...
Can anyone tell me what the problem is here? Thanks in advance.
Best regards,
Nick

Hello,
APEX version 4.1.0.00.32 and 4.2.3.00.08
Browser: latest version of Chrome browser
I'm trying to include plugin events for the Select2 APEX plugin but facing one rather annoying issue; the dynamic actions based on the plugin events are not getting triggered. These are the steps I have taken:
1. Registered several events with the plugin (e.g. slctchange, slctopen, slcthighlight, etc.). These events are based on the official Select2 documentation.
2. Modified the render function to include event handlers that trigger the appropriate Select2 event.
$("' || l_item_jq || '").on("change", function(e) {
apex.jQuery(this).trigger("slctchange", { val:e.val, added:e.added, removed:e.removed });
$("' || l_item_jq || '").on("select2-opening", function(e) {
apex.jQuery(this).trigger("slctopening");
$("' || l_item_jq || '").on("select2-open", function(e) {
apex.jQuery(this).trigger("slctopen");
$("' || l_item_jq || '").on("select2-highlight", function(e) {
apex.jQuery(this).trigger("slcthighlight", { val:e.val, choice:e.choice });
$("' || l_item_jq || '").on("select2-selecting", function(e) {
apex.jQuery(this).trigger("slctselecting", { val:e.val, choice:e.choice });
$("' || l_item_jq || '").on("select2-clearing", function(e) {
apex.jQuery(this).trigger("slctclearing");
$("' || l_item_jq || '").on("select2-removed", function(e) {
apex.jQuery(this).trigger("slctremoved", { val:e.val, choice:e.choice });
$("' || l_item_jq || '").on("select2-focus", function(e) {
apex.jQuery(this).trigger("slctfocus");
$("' || l_item_jq || '").on("select2-blur", function(e) {
apex.jQuery(this).trigger("slctblur");
I can confirm that the slctchange event (the first event in the list) is working properly both in APEX 4.1 and 4.2. Please note that I had to use apex.jQuery instead of $ to get it to work in 4.1. Might be because I overloaded jQuery in 4.1. Anyway, all others events are not getting triggered for some reason. The event handlers are getting executed for the appropriate event; that's not the problem. I guess the source of the problem lies with the trigger function. It simply doesn't trigger any of my dynamic actions.
To make things even more complicated, it is possible to trigger the events manually in console. So if I execute this statement:
apex.jQuery("#P20_SINGLE_VALUE_NEW").trigger("slctopen");
Then I get back the result from the dynamic action.
I tried a lot of different ways to trigger the plugin event. For example:
$("' || l_item_jq || '").on("select2-open", function(e) {
apex.jQuery(this).trigger("slctopen");
$(this).trigger("slctopen");
apex.jQuery(this).trigger("slctopen.BE_CTB_SELECT2");
$(this).trigger("slctopen.BE_CTB_SELECT2");
apex.jQuery("' || l_item_jq || '").trigger("slctopen");
$("' || l_item_jq || '").trigger("slctopen");
apex.jQuery("' || l_item_jq || '").trigger("slctopen.BE_CTB_SELECT2");
$("' || l_item_jq || '").trigger("slctopen.BE_CTB_SELECT2");
Nothing gets triggered...
Can anyone tell me what the problem is here? Thanks in advance.
Best regards,
Nick

For the new delivery type created the Idoc is not getting triggered

Hi All,
I am facing the following problem:
For every outbound delivery getting created we have an Idoc which creates the file(sending the outbound delivery details), this file is sent to a system where the picking & packing of the goods happen. This process seems to be working fine for all the existing delivery types, but now we created a new delivery type for which the Idoc is not getting triggered.
Would like to understand what setting are we missing because of which the Idoc is not getting created for the new delivery type.
The Idoc being used is: DESADV01
Message type :DESADV
Thanks,
Geeta

I believe your existing idocs are created through a output type on the delivery ? if yes, probably you need to configure an existing output type / create a new output type for your new delivery type...

Exit Class for Inbound Mail not getting triggered

Hi Gurus,
I have created an exit class for processing the Inbound Mail that comes to SAP Inbox (SOIN).
I have set up the Inbound processing rule in transaction SO50 and set it to all recipients.
If i send a mail from any external id to the id configured in SAP then it is coming in SAP Inbox (SOIN) but the exit class for processing the email is not getting triggered.
I have made all the settings for SMTP.
Kindly guide me with the steps needed to be followed for triggering the Exit Class.

Hi
Check u have maintained ur outgoing mail server IP in SCOT transation.
Check link step to configure PO mail.
http://architectsap.com/blog/sap/sap-mm-purchasing-send-purchase-order-by-mail-to-vendor-in-sap/

Issue in Production for Workflow not getting Triggered .

Hi Guys,
I have a workflow, which is properly triggering in the development and Quality but not getting triggered in the Production. Can't get the Exaact reason because by using T-code PFTC when i test the workflow independantly its working properly and even BOR does not have any problem. Please Help me guys as this is a issue in Production.
The workflow is a customized one, It getting triggered throught the funtion call in User Exit of MM01.
Thanks

It getting triggered throught the funtion call in User Exit of MM01.
1. I hope the workflow customization is done properly in production system, as you stated that if you are trying to trigger from PFTC then it is working fine, can you please try to Refresh Organizational Environment from SBWP ---> On MEnu ---> Settings --> Workflow Settings ---> Refresh Organizational Environment and secondly try to refresh the buffer from txn SWU_OBUF
2. Make sure the user exit is transported to Production.
3. Check the workflow log from the txn SWIA if you have proper authorizations for the userid.

Userexit not getting triggered for 0CFM_CLASS_MASTER_DATA_ATTR

Similar Messages

Maybe you are looking for