Username and employee_id are not replicated during Initial load

In our system we want to integrate HR in ECC (via BP in ECC) with BP in CRM.
Our system consists of SAP ECC 6.0 and SAP CRM 5.0. HR is used for maintaining our (master)data. This all works fine, but when checking the replicated data (in CRM) there's some data missing. In CRM BP there is no EMPLOYEE_ID and USERNAME while they are in ECC BP. Is anyone familiar with this problem or does anyone know where I need to search for a solution.

Thanks four your reply, but I already applied Note 550055. I also applied Note 934372. All the settings are right and the integration works fine. It just looks as the BDoc doesn't transfer the username and employee_id (these values are empty when I look at the BDoc).
Concerning table T77S0, entry HRALX/USRAC should handle the creation and linking of (not-existing) users in the target system (ie. CRM) but because the values aren't transferred I can't check whether this is the case.

Similar Messages

My wife has bought an iPad from a friend. My wife has an iphone with an iCloud account. When trying to connect to iCloud from the new iPad it says her username and password are not authorised. Any help

MMy wife had bought an iPad from a friend. My wife already has an iPhone, which is registered to iCloud. She cannot acces iCloud from the new iPad. It says her username and password is not authorised. What do we need to do.

This could be a couple different things.
     The device is not authorized to the Apple ID.
         Continue setup for the ID on the device.
There is an account issue
        Is she able to get signed in at
               Appleid.apple.com
                   and manage the account
Can she get signed in at
Supportprofile.apple.com ?
         How many devices are registered to that Apple ID?

Unable to set parental controls on itunes b/c my username and password are not correct. How do I reset them? There is no prompt to give any clues what they are.

unable to set parental controls on Itunes b/c my user name and password got rejected. How do I reset them or figure out my username and password?

This is a user to user support forum. We are all iphone users just like you.
You are not addressing Apple here at all.
This is an odd way to ask your fellow iphone users for help. Berating oterh users will not help you.
"it's too fragile"
No it is not. i have never damaged one, nor has anyone I know.
" U loose data when Ur phone is locked"
No you don't. Why do you think this?
"and there is no customer support!!! "
Wrong yet again. Apple has an 800 number and they have many retail stores and they have support articles that you can access using the search bar. Or you can contact them throgh express lane online
"but I will go back with Blackberry "
Please do.
Good ridance

I have downloaded the kindle app , but I am unable to registrar as it says the username and password are not correct . I don't think I have used this app before ( but not sure). How do I reset ?

I have downloaded the kindle app but I am unable to registrar as it keeps saying username and password incorrect ( I don't rember using this app before) and I am at a loss at how to reset

Are you entering your Amazon account id and password ?

Usernames and Passwords are not Saved

I made sure that the security option for remembering saved passwords was checked; but the new version of Firefox is NOT saving them; I must enter them each time I visit any site that requires a username or password. There was no problem with version 3 in this regard.

You're welcome and I know the feeling, because I am a senior and get those moments myself.

In attempting to install Adobe Flash Player, my username and password are not accepted. Cannot proc

Need help

To let you know, my computer was hacked last night. My password has changed. You should be alerted.
Marilyn McNeil

HT1338 I have just bought an iphone 5 but I can't sync as my mac and itunes are not compatible: I have loaded on the new software available, any idea's???

I have a mac mini 10.5.8 It is a little old and will not support the new iphone 5 for syncing etc.
Do I need to purchase new software i.e. snow leopard or can I download something that will allow me to get the new itunes etc????

Hi, Notso Techie.
Syncing your iPhone 5 with iTunes will require Mac: OS X v10.6.8 or later. You should be able to purchase Mac OS X 10.6 via the link below.
Snow Leopard Support
http://www.apple.com/support/snowleopard/
Cheers,
Jason H.

TS3276 The mail doctor is saying my username and password are incorrect. They were not. I changed my password anyway, and it still won't let me send my mail. How do I fix this?

The mail doctor is saying my username and password are incorrect. They were not. I changed my password anyway, and it still won't let me send my mail. How do I fix this?

try to log in using webmail. if you can't do that, then issue is solved.

I updated my ipod and my computer crashed during the update now the apps that come with the ipod such as the app store and itunes are not on my ipod how do i fix this

i updated my ipod and my computer crashed during the update now the apps that come with the ipod such as the app store and itunes are not on my ipod how do i fix this

Connect your iPod to any computer with iTunes installed, highlight your device and try syncing the apps only. If it doesn't work might have to restore through iTunes. With the new iTunes and iCloud beta, you can have the iTunes list what apps are missing on your device but if you had previously purchased in the past and then have iTunes install them. You should always get in the habit of backing up your iPhone whenever you do any firmware/OS updating/upgrading or transferring over to new device. I really really really really hope you can get back at least some of your old info. I will tell you this, I have been kicking myself in the butt for not routinely backing up my iPhone when my beautiful special iPhone 4 came up missing and had to revert back to my 3GS. iPhone 5 will be released in a few months so I am holding off on purchasing a new iPhone til then, not that I did so without reservation and a little bit of iPhone 4 withdraw.

Could not open gmail on the mail application of the mac book pro. Gmail has two account types, SMTP and Google IMAP. In both cased failure in trying to log on to SMTP and Google IMAP because I have to verify that the username and password are correct. Ho

Could not open gmail on the mail application of the mac book pro.
Gmail has two account types, SMTP and Google IMAP.
In both cases failure in trying to log on to SMTP and Google IMAP because I have to verify that the username and password are correct.
How do I verify that? Please help. Thanks.

Routing gmail through Mail.app:
imap-http://mail.google.com/support/bin/answer.py?answer=81379&topic=12814
pop-http://mail.google.com/support/bin/answer.py?answer=13275&topic=12810
More up-to-date advice here:
http://www.macworld.com/article/2033842/make-mail-and-gmail-play-nice.html#tk.nl _mwhelp
Note that you lose privacy when using Gmail (and Yahoo):
Gmail and Yahoo both scan users' emails. They do algorithmic analysis of your email messages, targeting ads that relate to the content of your messages.

Mail says my gmail usernames and passwords are wrong but they're not

I'm trying to set up my gmail account on my laptop and iPhone but everytime I try I get an error message that reads "Logging in to the Gmail IMAP server “imap.gmail.com” failed. Make sure the user name and password you entered are correct, then click Continue. If the information isn’t correct, you cannot receive messages." I get this message on both devices but when I log onto gmail from a web browser using the same info everything works perfectly. The username and password are correct but mail say they're wrong. Any ideas?

Mac OS X Mail Setup Assistant
Gmail Apple OS X - Bing
http://www.apple.com/support/mail has more support articles

Please help! I defragged my hard drive and now Illustrator CS6 is trying to open all of my complex Illustrator files with a "Text Import Options" box as if they are text files, and they are not opening!

Please help! Illustrator CS6 started trying to open all of my complex.ai files with a "Text Import Options" box as if they were text files, and they are not opening! Help!

Hi Monika,
I have spent the last two or three days trying to do what you suggested. I uninstalled Adobe 6 from Windows. Some files that CS6 placed on my system during installation remained, including fonts and .dll files.
I had to abandon the Cleaner Tool you suggested because in one screen it allowed me to specify removing CS6 only, but on the following screen it only gave on option to remove ALL Adobe programs. I could not do that because I didn't have the serial number handy for CS3 in case I want to reinstall it at some point.
I tried to get technical help with the Cleaner Tool problem but no definitive help was available, so I reinstalled CS6 again without having the benefit of the Cleaner Tool. I tried to get the serial number for CS3 so I could use the Cleaner Tool but spent 2 wasted hours in chat. Even though I had a customer number, order number, order date, place of purchase, the email address used AND 16 digits of the serial number, in two hours the agent couldn't give me the serial number. After two hours I had nothing but instructions to wait another 20 minutes for a case number.
Illustrator CS6 is still trying to open some backups as Text and otherNone of the problems have been fixed. I have tried to open/use the .ai files in CS6 installed on another system and am getting the same result, so I don't think the software was damaged by the cleaner. The hard drive cleaner is well-known and I've run it many times without any problem to previous versions of Illustrator or any other programs.
When I ordered, the sale rep promised good technical support and gave me an 800 number, but after I paid the $2000, I learned that the 800 number she gave me doesn't support CS6 and hangs up on me. Adobe doesn't call it a current product even though they just sold it to me about 3 weeks ago.
Would appreciate any help you experts can offer. If I can't solve this, the last backup I can use was from June and I will have lost HUNDREDS of hours of work and assets that I cannot replace.
Exhausted and still desperately in need of help...

Claims Based Authentication SPSecurityTokenService.Issue() failed: The security token username and password could not be validated.

Please excuse the lousy table...Its late :-)
I have a multi-server SP2010 farm. Patched up to
Configuration database version: 14.0.6106.5002
My goal is to have a claims based web application that authenticated to ADAM for Extranet. I have configured the servers exactly to MSDN and technet specs (following this spec to the
letter (
http://technet.microsoft.com/en-us/library/ee806882.aspx) to allow the forms side of the web app to authenticate to ADAM.
IT WORKS IN DEV!!! , which is a single server farm. However, it does not work in production. I get the following:
Claims Auth log entries:
1:06:25 AM
w3wp.exe (0x0EDC)
0x1790
SharePoint Foundation
Claims Authentication
f2ut
Verbose
Authenticated with login provider. Validating request security token.
1:06:25 AM
w3wp.exe (0x0EDC)
0x1790
SharePoint Foundation
Claims Authentication
0
Verbose
Using membership provider 'ADAMProvider'.
1:06:25 AM
w3wp.exe (0x0EDC)
0x1790
SharePoint Foundation
Claims Authentication
0
Verbose
Doing password check on '[email protected]'.
1:06:46 AM
w3wp.exe (0x0EDC)
0x1790
SharePoint Foundation
Claims Authentication
0
Verbose
Failed password check on '[email protected]'.
1:06:46 AM
w3wp.exe (0x0EDC)
0x1790
SharePoint Foundation
Claims Authentication
0
Unexpected
Password check on '[email protected]' generated exception: 'System.ServiceModel.FaultException`1[Microsoft.IdentityModel.Tokens.FailedAuthenticationException]: The security
token username and password could not be validated. (Fault Detail is equal to Microsoft.IdentityModel.Tokens.FailedAuthenticationException: The security token username and password could not be validated.).'.
1:06:46 AM
w3wp.exe (0x0EDC)
0x1790
SharePoint Foundation
Claims Authentication
fo1t
Monitorable
SPSecurityTokenService.Issue() failed: System.ServiceModel.FaultException`1[Microsoft.IdentityModel.Tokens.FailedAuthenticationException]: The security token username and password
could not be validated. (Fault Detail is equal to Microsoft.IdentityModel.Tokens.FailedAuthenticationException: The security token username and password could not be validated.).
1:06:46 AM
w3wp.exe (0x1B34)
0x08A0
SharePoint Foundation
Claims Authentication
fsq7
High
Request for security token failed with exception: System.ServiceModel.FaultException: The security token username and password could not be validated.
at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.ReadResponse(Message response)
at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst, RequestSecurityTokenResponse& rstr)
  at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst)
at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForContext(Uri context, Boolean bearerToken, SecurityToken onBehalfOf, SecurityToken actAs, SecurityToken delegateTo)
1:06:46 AM
w3wp.exe (0x1B34)
0x08A0
SharePoint Foundation
Claims Authentication
8306
Critical
An exception occurred when trying to issue security token: The security token username and password could not be validated..
1:06:46 AM
w3wp.exe (0x1B34)
0x08A0
SharePoint Foundation
Claims Authentication
f2un
Verbose
Form authentication failed.
I have tried EVERYTHING (well, nt everything, I don’t have the fix I suppose).
I found plenty out there and nothing directly correlates with this issue.
I searched on all parts of the errors I got.
This contains an interesting blurb about setting up access for the apppool id correctly.
That’s not the case for me. It works in dev and the same id are used there.
http://sharepoint-2010-world.blogspot.com/2011/03/adam-forms-based-authentication-in.html
This was good but it doesn’t give specs on what the environment looks like:
http://social.msdn.microsoft.com/Forums/en/sharepoint2010general/thread/557143a6-4b36-4939-bb7f-d62a9335fd18
The was interesting…but I am patched up beyond the June 2011 CU so it’s a moot point:
http://social.technet.microsoft.com/Forums/en-US/sharepoint2010setup/thread/9b8368ef-c5e5-4ead-b348-7b2b5587cfc8
Any and all help would be greatly appreciated!

Hi.
You say its a multiserver farm, do you have more than one web server then?
If thats the case, have you tried accessing the site on each server directly?
Found this for you, maybe that can help?
Troubleshooting Exceptions: System.ServiceModel.FaultException`1
http://msdn.microsoft.com/en-us/library/bb907220.aspx
and this:
SharePoint 2010 Claims Authentication - The security token username and password could not be validated reoccurring every morning
http://social.technet.microsoft.com/Forums/pl-PL/sharepoint2010setup/thread/383f1f9b-5c4a-4e19-b770-2a54b7ab1ca1
and
This seems to be a good guide:
http://donalconlon.wordpress.com/2010/02/23/configuring-forms-base-authentication-for-sharepoint-2010-using-iis7/
Good luck
Thomas Balkeståhl - Technical Specialist - SharePoint - http://blksthl.wordpress.com

Some Sales Orders are not replicating into CRM

Hi guys,
when I check SMQ2 in CRM, I find that some sales orders are not replicating into CRM, then check the error, its says check SMW01..
when I check the SMW01 it says validation error and BDOC status is F05 (information no processing). I tried to search the sales order in CRMD_Order transaction could not find the sales order...
*Error in SMW01*
Processing of document with Guid E01D11C71856C4F1AEBF0024E84DD0CE is canceled CRM_ORDER
Validation error occurred: Module CRM_DOWNLOAD_BTMBDOC_VAL, BDoc type BUS_TRANS_MSG. SMW3
It's not giving much clue what's the error is...
I tried to setup a request to replicate those sales orders.. those request also end up in the same error...
any help on this?
thanks,
Ken

Hello Ken,
When reprocessing a BDoc(via SMW01) you might need to set a flag.
Goto trxn. SMW01. Start the debugger using command '/h' and reprocess the BDoc. After going into the debug mode press SHIFT+F7 and put a breakpoint at 2nd Tab in : class:cl_smw_flow and method 'restart_processing'. Keep debugging(F5 or F6 accordingly) until you find the requisite flag l_retry_allowed and set it as 'X'. This will allow you to reprocess the Bdoc.
Thanks,
Rohit

Username and password do not get applied to WS Invocations in PS3 project

I am running into a situation where username and password do not get applied to WS Invocations in PS3 project I am deploying using config plan, this is used to work correctly in PS2. Did the syntax for the deployment configuration plans for PS3 BPM have changed?
This is the error that I am getting from the BPM soa_server.log file:
<Feb 9, 2011 1:04:16 PM PST> <Error> <oracle.wsm.resources.enforcement> <WSM-07501> <Failure in Oracle WSM Agent processRequest, category=security, function=agent.function.client, application=default, composite=SpringWorkflow, modelObj=ActivityService, policy=oracle/wss_username_token_client_policy, policyVersion=null, assertionName={http://schemas.oracle.com/ws/2006/01/securitypolicy}wss-username-token.
oracle.wsm.common.sdk.WSMException: WSM-00015 : The user name is missing.
Caused by: oracle.fabric.common.PolicyEnforcementException: WSM-00015 : The user name is missing.
at oracle.fabric.common.AbstractSecurityInterceptor.processResult(AbstractSecurityInterceptor.java:239)
at oracle.fabric.common.BindingSecurityInterceptor.processRequest(BindingSecurityInterceptor.java:95)
I enabled ws logging for incoming and outgoing P6 web service requests, I see that the BPM server is not making an outgoing webservice call, looking more into the log file from soa_server.log I see that the exception is a PolicyEnforcementException confirming my suspicion that the username and password from the deployment config plan are not getting applied at runtime. This is used to work correctly in PS2. Any suggestions?
Config-plan:
<reference name="ActivityService">

<binding type="ws">
<attribute name="port">
<replace>http://xmlns.oracle.com/Primavera/P6/WS/Activity/V1#wsdl.endpoint(ActivityService/ActivityPort)</replace>
</attribute>
<attribute name="location">
<replace>http://x.x.x.x:7001/p6ws/services/ActivityService?wsdl</replace>
</attribute>
<property name="weblogic.wsee.wsat.transaction.flowOption">
<replace>WSDLDriven</replace>
</property>
<property name="oracle.webservices.auth.username">
<replace>admin</replace>
</property>
<property name="oracle.webservices.auth.password">
<replace>admin</replace>
</property>
</binding>
</reference>
Deployment Log from Jdev:
[04:05:01 PM] ---- Deployment started. ----
[04:05:01 PM] Target platform is (Weblogic 10.3).
[04:05:01 PM] Running dependency analysis...
[04:05:01 PM] Building...
[04:05:11 PM] Deploying profile...
[04:05:11 PM] Updating revision id for the SOA Project 'SpringWorkflow.jpr' to '1.0'..
*[04:05:11 PM] Copying file:/E:/dev/bpm11g/springdemo/SpringWorkflow/SpringWorkflow_cfgplan.xml to soaconfigplan.xml*
[04:05:11 PM] Adding soaconfigplan.xml to archive.
[04:05:11 PM] Wrote Archive Module to E:\dev\bpm11g\springdemo\SpringWorkflow\deploy\sca_SpringWorkflow_rev1.0.jar
[04:05:11 PM] Deploying sca_SpringWorkflow_rev1.0.jar to partition "default" on server soa_server1 [x.x.x.x:8001]
[04:05:11 PM] Processing sar=/E:/dev/bpm11g/springdemo/SpringWorkflow/deploy/sca_SpringWorkflow_rev1.0.jar
[04:05:11 PM] Adding sar file - E:\dev\bpm11g\springdemo\SpringWorkflow\deploy\sca_SpringWorkflow_rev1.0.jar
[04:05:11 PM] Preparing to send HTTP request for deployment
[04:05:11 PM] Creating HTTP connection to hostx.x.x.x port:8001
[04:05:13 PM] Sending internal deployment descriptor
[04:05:13 PM] Sending archive - sca_SpringWorkflow_rev1.0.jar
[04:05:15 PM] Received HTTP response from the server, response code=200
[04:05:15 PM] Successfully deployed archive sca_SpringWorkflow_rev1.0.jar to partition "default" on server soa_server1 [x.x.x.x:8001]
[04:05:15 PM] Elapsed time for deployment: 14 seconds
[04:05:15 PM] ---- Deployment finished. ----

We should take a look at the log files to see what's really going on but if you haven't done anything with the installation yet then "reinstalling" is very easy.
In the directory where you launched the jar file, you should find a directory named "crx-quickstart". Simply rename this directory to "crx-quickstart.old" and restart the jar file. Your new environment will be ready in a couple of minutes. Keep the old directory and look into the [your directory]\crx-quickstart\logs directory for details on your original problem.

Username and employee_id are not replicated during Initial load

Similar Messages

Maybe you are looking for