Users Authorization- Restrict value of one variable corresponding to other.

Dear Experts,
I have query regarding BEx Authorization for the given selection screen of any variable for any report :
I have two parameters/variables( Category and Sub Category) which needs to be passed from User. I want to restrict the value of second variable corresponding to the values passed in first variable. For e.g. : if i passed Category value -Engineering ,Sub Category variable should only show the value related to engineering only other than all the values in sub category field in the selection screen for the user.
Please suggest.

Hi Shikhar,
E.g. Category: Engineering , Arts , Commerce
Sub Categories for Engg. ECE, IT , CSE.
                               Arts : sociology philosophy etc
                               Commerce: economics, accountancy etc
Now Maintain authorization for Char. related to Engineering and create Auth. variable, follow this steps:
Transaction Code- RSECADMIN
Steps to create Authorization based on Division e.g. InfoObject    is 0DIVISION.
Check for 0DIVISION, it must be Authorization relevant checked, if not then maintain 0DIVISION and check Authorization relevant box.
Step 1: Create Analysis Authorization Maintenance using RSECADMIN T-Code, in that add 3 special characteristics i.e. 0TCAACTVT , 0TCAIPROV and 0TCAVALID, these are the mandatory Char. along with that add 0DIVISION for which you want to create Authorization, 0DIVISION details restrict value as 01 (EQ 01).
Step 2: Again goto RSECADMIN -> User tab-> Assignment, enter username (e.g. User1) which you want to restrict. insert Auth. obj. from step1.
Step 3: Now in Query designer, create Authorization variable for 0DIVISION, i.e. process type Authorization.
Execute That query with restricted user (e.g. User1) it will only show the data for Division = 01.
For reference: [http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c0b7acf2-6121-2e10-5591-eaec182d9315]
Hope this will meet your requirement, let me know if further explanation required.
Regards:
Avinash

Similar Messages

Restrict value of one variable corresponding to value passed in other.

Dear Experts,
I have query regarding BEx Authorization for the given selection screen of any variable for any report :
I have three parameters/variables( Circle ,SSA and Exchange) which needs to be passed from User. Circle(state)->SSA(City)->Exchange(Sub Locality). I want to restrict the value of second and third variable corresponding to the values passed in first variable. For e.g. : if a value Madhya Pradesh is passed as a Circle then SSA selection screen should show only
City or SSAs of Madhya Pradesh only. Same case with selection screen of exchange variable also.

Hi Shikhar,
I think you will have to have Circle (State) as the attribute of SSA(City) and SSA(City) will have to be attribute of Exchange (Sub Locality). Then when you enter a value in Circle variable, the take the F4 help on SSA, then you will get the values which are relevant for the respective Circle. Similarly the Exchange.
If you enter a wrong value for SSA and Exchange...and click check, then the system should throw an error.
Apart from this you can also create Authorization objects for all the three objects in RSECADMIN and provide appropriate access to relevant users. In this case the users will see only the authorized values in the F4. However the system will not throw an error during the input of the variables. But will only display authorization error only when you execute the query.
Good Luck,
Vikram

How to find out the max/min value of one field corresponding to a second field in HANA through graphical way.

Hi,
I am trying to find out the latest delivery date(EINDT) for each purchasing document (EBELN) through graphical way.
The view contains other fields apart from the above mentioned two fields.
When only the two fields (EBELN, EINDT) are there, then in semantics, I can select 'Max' as aggregation to get the maximum value for each document.
If I do like this, then I need to join more than 3 views and also so many joins in calculation view. Taking so much time for data preview.
Hence , please help me in getting the solution while the view contains other fields also.
Thanks in advance.
Thanks,
Jyothirmayi

Hi Sreehari/Vinoth,
Thank you for your replies.
if only two fields are then I can get the max/min values of one field corresponding to other field.
But more than two fields are there with different values, then let me know how to find out the max/min value of a particular filed corresponding to the 2nd field with other fields also should be in the output.
I hope you understood my issue.Please revert in case of questions.
Thanks & Regards,
Jyothirmayi

Multiple values for one variable?

I've created my first set of variables (using Form Properties>Variables), tweeked some XML sourcecode and they're working .
What I'm now trying to figure out is how to have one variable that has 2 values that pop up in 2 different text fields.
Simple form at this point:
Item, Model and Service Tag.
The user selects the item from the drop down list and the Service Tag field is autopopulated from the variables I set.
How do I get the Model to appear based on the Item selection?
I tried putting the two values for one variable together but both values appear in the same field.
Variable info that works: Scan (variable) = MC3090BT (value)
I also need this particular variable to = Handheld scanner (try to ignore the redundancy).
I attempted to make MC3090BT as it's own variable with Handheld scanner as it's value, and add to the code below but it didn't work.
Here's some of the code if it helps:
<event activity="change" name="event__change">
               <script contentType="application/x-javascript">if(xfa.event.newText == "Handheld scanner"){
    servicetag.rawValue = scan.value;
}else if(xfa.event.newText == "Latitude X1"){
    servicetag.rawValue = X1.value;

Hi, I am trying to do the same thing..passing multiple values to receiving query variable through RRI. Right now if I assign a query variable of type multiple single values it does not take any value. It works only if I assign variable of type Single Value.
In my assignment details the sender query has Generic for type and * for selection type.
If any one knows how to pass multiple values to receiving RRI query, please give the details.
Thanks

Add values to one variable in a loop

Hello,
I have a while loop where I read a counter and get values.
Now I want to add all values to one variable. I think an array won't be good because
the loop can run a long time and an array is limited.
And the end I want to have the sum of all values.
I tried to use shift registers.
But how can I store the value of the first loop-cycle in a variable and on
the second loop-cycle take this stored value and add the new value and so on?
Another problem that is maybe more difficult, is that I need the max and min value
of all values that has been read.
That means I need a variable which stores the current value. Then I have to compare the stored
with the next value and maybe exchange both.
I would be thankful fo
r any hints.
best regards Thomas

Attached is a picture of a code that does what you want; it calculates the sum of each value, it finds the minimum and maximum (and average)...and it does not create any arrays.
The value source and the condition to stop the loop is what you need to change...In addition you might want to see preliminary values...if so then add indicators inside the loop.
MTO
Attachments:
sum_min_max.gif ‏27 KB

Passing multiple values to one variable in jsp/javabean

I have a form, which contains an assortment of fields/checkboxes/etc. What I'd like to see is when someone goes through the form and enters text or checks any fields on the form they want, after they submit it to the next page, the next page will display all those values that they entered or checked. Some of these values entered may be strings or integers. I want all those values (checkbox1, checkbox2, etc) to be stored in one variable in a javabean so I can call upon that value at anytime during the session. Any suggestions?

why do you want to store so many data in just one variable?

Move values of one field symbol to other field symbol of different structur

Hi all,
i need to move values of one field symbol to other field symbol of different structure.
I need to perform operations like MOVE-CORRESPONDING on two field symbols of different structure.
How can i achieve this?
field symbol 1 have 2 field and field symbol2 have 4 fields....
Best Regards,
Vijay.

Hi,
You can use -
MOVE-CORRESPONDING <struct1> to <struc2>.
In this case it will move the contents of the components from struct1 to struct2 that has identical names.
You can refer this link also-
http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3260358411d1829f0000e829fbfe/content.htm
Regards,
Sujit

Fetches more values into one variable

Hi, inside a cursor loop I'd like to assign, each fetch, a value to a variable, in order, at the end to have a collection of all the values fetched into the same variable.
The code is the following:
CREATE OR REPLACE procedure APPS.AAA as
v_pino varchar2(64);
CURSOR tks_opened_range IS
SELECT incident_number AS YP_TKS_OPENED_WITHIN_RANGE FROM cs.cs_incidents_all_b a, cs_incident_statuses_b b, Cs_Incident_Statuses_Tl c
WHERE b.incident_status_id = c.incident_status_id
AND a.incident_status_id = b.incident_status_id
AND (b.attribute1 <> '3' OR b.attribute1 IS NULL)
AND c.language = 'EL'
AND ((sysdate - to_date(incident_attribute_6, 'dd-mm-yyyy hh24:mi'))*1440) BETWEEN 1 AND 11111111111
AND incident_attribute_2 IN ('ΓΕΝΙΚΗ ΔΙΕΥΘΥΝΣΗ ΤΕΧΝΟΛΟΓΙΑΣ')
ORDER BY incident_number;
rec_tks_opened_range tks_opened_range%ROWTYPE;
begin
FOR rec_tks_opened_range IN tks_opened_range
LOOP
v_pino := rec_tks_opened_range.YP_TKS_OPENED_WITHIN_RANGE;
DBMS_OUTPUT.PUT_LINE('v_pino: ' || v_pino);
end loop;
end AAA;
This works with the variable v_pino!....but at the end, the value of the variable v_pino is ONLY the last fetched by the cursor.
Is there a way to declare a variable (or better a collection) or a new type in order to have all the data fetched into this variable and the end of the fetching ?
I need to know this trick because, after, I have to assign this variable to a pipelined table function.
Thanks in advance
Alex
/

Great Devang !! Thanks a lot ! It works ! Now I am able to retrieve all the values I need and store them into my variable gino
I searched on the note you mentioned in your mail in order to pass an array as a variable to a table function (PIPE ROW call), but I didn't find nothing about it.
Now I explain to you my situation.
I already implemented a table function that works perfectly. I have 2 cursors declared and 2 PIPE ROW calls.
FUNCTION statistic_report_2_1 (p_resolv_time_ll varchar2, p_resolv_time_ul varchar2, p_ypiresia varchar2)
RETURN xxi_statistic_rep_2_1_tab PIPELINED
IS
-- CURSORS FOR THE FIRST SHEET - Tickets opened per group and per duration
-- Cursor for tickets opened within 1 hour --
CURSOR tks_opened_1_h IS
SELECT incident_number AS YP_TKS_OPENED_WITHIN_1_HOUR
FROM cs.cs_incidents_all_b a, cs_incident_statuses_b b, Cs_Incident_Statuses_Tl c
WHERE b.incident_status_id = c.incident_status_id
AND a.incident_status_id = b.incident_status_id
AND (b.attribute1 <> '3' OR b.attribute1 IS NULL)
AND c.language = 'EL'
AND ((sysdate - to_date(incident_attribute_6, 'dd-mm-yyyy hh24:mi'))*1440) < 60
AND incident_attribute_2 IN (SELECT * FROM TABLE(CAST(xxi_szf_discoverer.ypiresia_values(p_ypiresia) AS xxi_ypiresia_list_tab)))
ORDER BY incident_number;
rec_tks_opened_1_h tks_opened_1_h%ROWTYPE;
-- Cursor for tickets opened between 1 hour and 3 hours --
CURSOR tks_opened_1_3_h IS
SELECT incident_number AS YP_TKS_OPENED_BE_1_3_HOURS FROM cs.cs_incidents_all_b a, cs_incident_statuses_b b, Cs_Incident_Statuses_Tl c
WHERE b.incident_status_id = c.incident_status_id
AND a.incident_status_id = b.incident_status_id
AND (b.attribute1 <> '3' OR b.attribute1 IS NULL)
AND c.language = 'EL'
AND ((sysdate - to_date(incident_attribute_6, 'dd-mm-yyyy hh24:mi'))*1440) BETWEEN 60 AND 179
AND incident_attribute_2 IN (SELECT * FROM TABLE(CAST(xxi_szf_discoverer.ypiresia_values(p_ypiresia) AS xxi_ypiresia_list_tab)))
ORDER BY incident_number;
rec_tks_opened_1_3_h tks_opened_1_3_h%ROWTYPE;
PRAGMA AUTONOMOUS_TRANSACTION;
BEGIN
-- FIRST SHEET OPEN CURSORS --
TICKETS NUMBER OPENED WITHIN 1 HOUR
FOR rec_tks_opened_1_h IN tks_opened_1_h
LOOP
PIPE ROW(stat_rep_2_1_type(
rec_tks_opened_1_h.YP_TKS_OPENED_WITHIN_1_HOUR
END LOOP;
-- TICKETS NUMBER OPENED BETWEEN 1 HOUR AND 3 HOURS --
FOR rec_tks_opened_1_3_h IN tks_opened_1_3_h
LOOP
PIPE ROW(stat_rep_2_1_type(
,rec_tks_opened_1_3_h.YP_TKS_OPENED_BE_1_3_HOURS));
END LOOP;
RETURN;
END statistic_report_2_1;
But, in this way and with this syntax, I obtain for each PIPE ROW call only one field filled each time, because I can’t call 2 cursors in a nested loop together (data duplication);
For example:
1st PIPE ROW call : only the first field is filled and into the second I have to put ‘’
2nd PIPE ROW call : only the second field is filled and into the first I have to put ‘’
….and I cant’ call with a single PIPE ROW call two cursor variables…..
Into a Discoverer report this data layout is really bad (you can imagine with thousand
of records).
For this reason I thought to use an array variable (gino) to pass to a single PIPE ROW call outside the cursor loop……but it doesn’t work !!!
Can you suggest me how to resolve this problem….if it possible ?
Did I have to declare other TYPE or collection ?
Thanks you so much
Alex

Pass variable value form one Operational mapping to other

Hi,
Can a variable value be passed form one Operational mapping to other in Interface determination?
So that a Condition check to excute the second operational mapping depending on variable value obtained form first operational mapping.
Can globalContainer could be used in UDF?
Thankx
Edited by: kevindass on Aug 25, 2011 9:13 AM

Hi,
You can try these two options:
1) Create a key in Dynamic Configuration and use it to store the value and retrieve the value back in second operation from Dynamic Configuration.
OR
2) Use Export and send the value to BPM, then in BPM using the value decide on if to execute the second operation.
Regards,
Aravind

How to get value od one variable baesd on another variable

Hi Gurus,
     Is this thing possible?My problem is i have one variable on "0calmonth2" based on this variable i want to populated the values in another object (0calquarter).i.e.
If i select " Jan or Feb or Mar" it should populate 1 in 0calquarter similarly, for other month

Hello Deepak
Try a function module like this:
FUNCTION Z_YOUR_FM.
""Interfase local
*" IMPORTING
*"     VALUE(I_AREA) TYPE UPC_Y_AREA
*"     VALUE(I_VARIABLE) TYPE UPC_Y_VARIABLE
*"     VALUE(I_CHANM) TYPE UPC_Y_CHANM OPTIONAL
*"     VALUE(ITO_CHANM) TYPE UPC_YTO_CHA
*" EXPORTING
*"     REFERENCE(ETO_CHARSEL) TYPE UPC_YTO_CHARSEL
*" EXCEPTIONS
*"      FAILED
clear export table
CLEAR eto_charsel.
data: i TYPE i value 1,
        ls_charsel TYPE upc_ys_charsel,
        l_periv type periv value 'K1',
        l_calmonth2 type UMC_Y_ICHAVAL,
        l_buffer_call TYPE boole-boole VALUE ' ',
        l_subrc LIKE sy-subrc,
        ls_return LIKE bapiret2,
        l_type LIKE upc_var-vartype,
        lto_varsel_all TYPE upc_yto_charsel,
        lto_varsel TYPE upc_yto_charsel,
        lto_chanm TYPE upc_yto_cha,
        wa_varsel like line of lto_varsel,
        l_quarter(1),
        l_quarterc(5).
Read value of CALMONTH2 variable
CALL FUNCTION 'Z_VARIABLE_GET_DETAIL'
    EXPORTING
      i_area         = <YOUR PLANNING AREA>
      i_variable     = <YOUR CALMONTH2 VARIABLE>
      i_buffer       = l_buffer_call
    IMPORTING
      e_subrc        = l_subrc
      es_return      = ls_return
      e_type         = l_type
      eto_varsel_all = lto_varsel_all
      eto_varsel     = lto_varsel
      eto_chanm      = lto_chanm.
IF l_subrc eq 0.
    loop at lto_varsel into wa_varsel.
      move wa_varsel-low to l_calmonth2.
    endloop.
ENDIF.
calculate quarter
CASE l_calmonth2.
    WHEN '01' OR '02' OR '03'.
      l_quarter = '1'.
    WHEN '04' OR '05' OR '06'.
      l_quarter = '2'.
    WHEN '07' OR '08' OR '09'.
      l_quarter = '3'.
    WHEN '10' OR '11' OR '12'.
      l_quarter = '4'.
ENDCASE.
passing QUARTER to variable value
CLEAR ls_charsel.
ls_charsel-CHANM = I_CHANM.
ls_charsel-SEQNO = i.
ls_charsel-sign = 'I'.
ls_charsel-opt   = 'EQ'.
ls_charsel-low   = l_quarter.
INSERT ls_charsel INTO TABLE eto_charsel.
add 1 to i.
ENDFUNCTION.
Hope this helps...
regards,
Ibrahim.

Copy values from one Parent node to other Parent Node

Hi all,
I have a 2 Parent node each having 3 child nodes. I want to copy the values of all the attributes of all the child nodes of one Parent Node to corresponding other node.
Both the Parent Nodes as well as their Child Nodes have different name but their attributes have same name.For ex:
Parent Node -A
Child Nodes - a, b,c
Child Node "a" has attributes "x" and "y"
Parent Node -B
Child Nodes - d,e,f
Child Node "d" has attributes "x" and "y" .
Now I want to copy the values od attributes "x" and "y" from one Parent Node to other Parent node.
Please help me out.
Helpful answers will be rewarded.
Thanxs in advance...

Hi Jin,
To use copy service API, u need to satisfy 2 condition for the attributes of source node and target node:
1. The name of the attribute should be same (including the case of the name)- Abc is different from ABC
2. Type of the attribute should also be the same.
copy elements works for copying values from Model node to context and does not work vice-versa. To enable the copying of context node to model node, use copycorresponding API.
Eg:
int contextNodeSize = wdContext().node<contextNodeName>().size();
for(int i = 0; i < contextNodeSize; i++)
     <modelNodeName> modelObject = new <modelNodeName>();
     <contextNodeName>Element contextObject = wdContext().node<contextNodeName>().get<contextNodeName>ElementAt(i);
     WDCopyService.copyCorresponding(contextObject, modelObject);
This will copy the values from Context Node to Model Node.
Hope this helps you.
Regards,
Poojith MV

How to use value from one data set in other data set SQL select.

Hello all, i have one data set, and i need to get value from that data set into other data set. Something like '?' but without input. I will try to explain it with screenshots:

If both tables come from the same data source, join the two tables in one data set rather than two as shown. If they are from different data sources, use a 'join data set'

Passing a user-entered value of one variable to other.

Hi Experts,
I am writing an exit for a variable 'Ref. Date' which is the FROM value of 'Cal. Week' variable.
Code works fine when written in CASE I_STEP = 2 of 'Ref. Date' . But errs when "Ready for input" condition is unticked. ('Ref. Date' is used for restriction of a KF).
CAn u pls tell me. Where exactly the code should be written?

Ok. Done.

Restricting values to one infoprovider

Dear Friends,
I am retrieving a Bex report from a muli provider, say Z_MULT
Behind this multiprovider i do have 3 infocubes say Z1, Z2 and Z3. Z1, Z2 and Z3 contains many similar fields one of which is Location. In my report I do want to get the Location details only from one cube (Z1) and Volume details from other 2 cubes. How could I restrict the location values from only one infoprovider?
Many thanks for helping me
Thanks and Regards
OOPs

Hi,
when ever we are creation the multi provider in query designer level by default under in Data package dimension u can get the info provider tab
under that info provider tab u can restrcit the functional location cube1 and value with cube2 and cube3
it gives data
but check the logic and do the data validation also
some times the data( values ) are coming based on the functional location of the cube2 and cube3 then the values will be in one row and functional locations will be another row
but in cubes the functional location is same( if your sure) then do as per the above.
Thanks & Regards,
sathish

How to restrict values in one prompt based on value from another prompt

Hi
I have a requirement as follows. I have two fields (objects)
program code
contract number
one program code can have several contract numbers.
I need to provide prompts on Program code and contract number. when user selects one program from the prompt on program code then contract field should only show contract numbers belonging the program user selected.
Please let me know how to bring this functionality in Webi report.
Thanks in advance.

Hi
if ur requirement is in query level its impossible.(i mean whn u click on programcode then u have to display in contract at query level)
if you want to display at report level then
The two objects Program and contract have a mapping then place a program object in query filter and use operator equal to and select prompt and run the query then it will ask you to select program .whn on choosing it you will get filtered contract numbers for that program in report level . There no need to use prompt for contract numbers object .
Hope this helps u
Thanks
sunil
Edited by: K.sunil on Nov 7, 2011 9:30 AM

Users Authorization- Restrict value of one variable corresponding to other.

Similar Messages

Maybe you are looking for