Users details not getting populated in the portal tables..

Hi,
We have implemented single sign on (SSO) and we do not create users in the portal as user/pwd come from OID.
Now becoz of this the portal tables are not getting populated.I require that all the users of the OID to be populated in the portal tables. How can I do it.I depserately require it.

You can use the function wwsec_api.activate_portal_user to create the shadow records in the portal repository.
Ref. : http://www.oracle.com/technology/products/ias/portal/html/plsqldoc/pldoc1014/wwsec_api.html

Similar Messages

Functional Area field not getting populated in the AUFK table

Hi Friends,
The table AUFK is the table for Internal Order master data.
The issue which we are facing is:
In a particular Order type, the field 'Functional Area' is suppressed in the field status group for the order master data.
But the cost centers which are maintained in the order master has the functional area field populated with value.
In the table AUFK, the functional area field is populated for some internal orders and not populated for others. In all cases it should pick the functional area from the cost center which is maintained in the internal order.
Please guide us about what can be the possible reason(s) for populating the field in some cases while not populating in other cases.
Thanks a lot in advance for your help.
Regards,
Shilpi

Hi,
maintain the functional area in order master data to ensure 100% functional area is available in AUFK.
I can't tell you the reason why its sometimes appearing and sometimes not bur FUNC_AREA is not picked from responsible/requesting cost center (from master data).
If in customizing of internal order order types a "model-order" is assigned with maintained functional area, this func_area is taken if you create a new order for this ordertype.
Best regards, Christian

Values not getting populated in the SMOPCCAPRO

Hi,
We had added a new field to CPGProduct in component CPGOE_ABLOCKS. But the extension field was not included to the BOL structure automatically.
So ,we had used the SAP note 1472567 to add the include structure INCL_EEW_MKTPL_PRD to structure CRMS_MKTPL_CPG_PROD which inturn would rectify our BOL structure CRMS_MKTPL_IB_CPG_PROD.
The field which we had added using AET was added in tables CRMD_MKTPL_PROD and SMOPCCAPRO. But we are facing an issue that the values are not getting populated in the SMOPCCAPRO table on save.The values are gettign populated in the CRM table.
Do we need to implement any other SAP note on the midleware side too to rectify this issue as i infer some interface structure would be missing this field which results in the truncation of value from being passed to the CDB table . Any pointers in this regard would be helpful.
Thanks
Swapna.

Hi Swapna,
as the CDB table has been extended with the new field I assume that you have enabled the mobile flag for the enhancement.
Then it will also extend the mobile BDOC and the data should be transfered automatically.
If this does not happen there's an error somewhere. Either the middleware is not set up properly or the mapping routine does not transfer the fields properly.
I recommend to raise an OSS message for this.
Best regards
Matthias

UWL : New tasks are not getting populated in the UWL

Hi Experts,
I<b> configured my uwl to my backend system , the completed tasks are getting populated in the UWL but the New tasks and in progress tasks are not getting populated in the UWL.(some thing strange).</b>
When i am trying to configure the universal worklist system ,its givin me a caution message as <b>System SHDCLNT012 does not support optimized delta pull</b> . where SHDCLNT012 is the system alias name.
Is this the problem for not populating the new tasks in the UWL?
Please provide me the solution..
Thanks & Regards,
Sateesh

Hi Sateesh,
This message will appear if either the background jobs are not scheduled, or UWL cannot tell that the background jobs are scheduled. The message no longer appears once you ensure the background jobs are scheduled to run via the user id UWL_SERVICE and that user is mapped to my portal user ID UWL_SERVICE.
Kai

ALV Block list. Field name at user command not getting populated

Hi All,
I'm trying to use ALN block list. Field catalog is built using the REUSEALVMERGE FM.
I've put hot spot on some fields. When I'm trying to capture the data when user clicks on the hotspot field the structure that comes in the user_command subroutine is not getting populated with the fieldname. But it is getting populated with the tabname and value is also coming properly.
FORM user_command
          USING
          ucomm    TYPE sy-ucomm
                selfield TYPE kkblo_selfield.
What could be the possible reason?
I appreciate your inputs.

Hi Surya,
         Did you find the solution for this?
Best Regards.

Work item not getting displayed in the portal

Hi experts,
We are creating a protoype for one of the standard HCM form for change in working time. When we initiate the process, the workflow is supposed to identify the agent(which is the manager in this case) and push the work item in the inbox of the manager.
In our issue, we are able to see the workitem in SAP inbox, but the same work item is not getting displayed in the portal.
If we try to approve from the SAP inbox, the hard coded message u201CWork item can only be executed using the Portal and the UWLu201D comes. [this comes through the method of one of the tasks 17900101 which we are using for approving the form]
We commented the message by using a Z class. Now we donu2019t get the hardcoded message, but still the workflow does not complete from here.
Can this be aan integration issue of the workflow tasks with the portal??Can someone elaborate on this??

<ItemType name="uwl.task.webflow.TS17900101.SAP_ECC" connector="WebFlowConnector" defaultView="DefaultView" defaultAction="launchWebDynPro" executionMode="default">
      <ItemTypeCriteria systemId="SAP_ECC" externalType="TS17900101" connector="WebFlowConnector"/>
      <Actions>
        <Action name="launchWebDynPro" groupAction="" handler="SAPWebDynproLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
          <Properties>
            <Property name="WebDynproApplication" value="ApproveFormApp"/>
            <Property name="WebDynproDeployableObject" value="sap.com/pa~asr~formstep"/>
            <Property name="newWindowFeatures" value="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no"/>
            <Property name="openInNewWindow" value="yes"/>
            <Property name="display_order_priority" value="5"/>
          </Properties>
          <Descriptions default=""/>
        </Action>
      </Actions>
    </ItemType>
You have to say to your portal team to modify their XML file as above. In simple you hvae to configure the task in the portal and in the SWFVISU txn as follows with the following vizualization parameters
Task TS17900101 and visualization type is JavaWebDynpro
APPLICATION     ApproveFormApp
PACKAGE     sap.com/pa~asr~formstep

Values not getting populated in the o/p

Hi,
I have a requirement,where in which I have to add MRP Controller(marc-dispo) and production scheduler(marc-fevor) fields in the selection screen and the same should be added in the o/p.These fields are not getting populated in the o/p,even if I give some values for these fields in the selection-screen.What would be the reason for this?
Regards,
Hema

Dear Hema,
Could you please tell me how many internal tables you are using to store the data for display.
I observerd that you have lt_stock and lt_mat2 declared in the part of the program
>DATA: lv_stock TYPE lty_stock.
>DATA: ltmat2 TYPE TABLE OF lty_mat.
you have displayed above, however you are also using ls_stock and lv_stock .
>IF p_ztotal = ' '. "line
>WRITE 18 ls_stock-matnr.
>WRITE 38 lv_stock-strgr.
>
>ELSEIF ztotal = 'S'.                             "subtotal
    >WRITE: 15 ls_stock-nrmit.
    >WRITE 32 lv_stock-dispo.
    >WRITE 43 lv_stock-fevor.
>ELSE.                                            "total
    >WRITE: 15 'TOTAL'(016), ls_stock-prgrp.
>
>ENDIF.
Are those for displaying some other information?
Also the problem of display you are facing can also be because there are no records to be displayed which satisfies the selection criteria.
Best Regards,
Rajesh.
Please reward points if found helpful.

Data not getting uploaded in the AQ table.

Hi All
We have one issue with the AQ tables.
The scenario is like we first send data from Oracle to SOA and then to a third party tool.
For this we first populate data in one custom payload table and then in to one custom AQ table.
Now the data is getting updated in the paylaod table and XML is getting generated, but it is not getting interfaced to the third party tool.
Reason : Data is not getting populated in the custom AQ table from where SOA picks the data and interfaces it ti the third party tool.
Error is a custom one :
While equeing the data using the below statement
l_chr_corrid := p_in_event.getvalueforparameter ('CORRID');
since the CORRID Id is null it gives us the message :Correlation ID has not been set for the payload.
Part of the code for setting WF parameters :
l_chr_corrid_val := l_chr_event_name || '.order';
wf_event.addparametertolist (p_name => l_chr_corrid_name,
p_value => l_chr_corrid_val,
p_parameterlist => l_param_list
l_local_event.setcorrelationid (l_chr_corrid_val);
l_chr_rule_ret := wf_rule.default_rule (p_in_subscription_guid, l_local_event); -- Returns success
This is quite urgent , hence kindly help us find a sollution to this issue.
Thanks in advance
Trupti

Looks like you havent populated the correlation id. To make sure this is unique use the conversationID, or GUI, etc.
Not sure what version you are on. If 10g look at this note (obviously chnage from file to AQ, concept the same):
http://middleware1.wordpress.com/category/adapters/page/2/
If 11g you should be able to see the property when you edit the invoke activity, there is a tab called properties.
cheers
James

Search Help for Vendor Feild not getting populated in the Screen Element

Hi Everyone,
In transaction Miro, I get a POP-UP for Invoicing Party i.e. Vendor and Users required a custom search help.
The Search help for Vendor(LIFNR) is KRED_C and i appended a Z search help under this.
Now that the search help exists and I can drill down the values too but when i select/choose any value, that value is not getting populated in Screen feild.
is there any validation I need to do for this.
Please suggest me... I checked SDN there are many things but i couldn't figure out wat i need to do and where I need to modify.
Regards,
Raj

Dear Hema,
Could you please tell me how many internal tables you are using to store the data for display.
I observerd that you have lt_stock and lt_mat2 declared in the part of the program
>DATA: lv_stock TYPE lty_stock.
>DATA: ltmat2 TYPE TABLE OF lty_mat.
you have displayed above, however you are also using ls_stock and lv_stock .
>IF p_ztotal = ' '. "line
>WRITE 18 ls_stock-matnr.
>WRITE 38 lv_stock-strgr.
>
>ELSEIF ztotal = 'S'.                             "subtotal
    >WRITE: 15 ls_stock-nrmit.
    >WRITE 32 lv_stock-dispo.
    >WRITE 43 lv_stock-fevor.
>ELSE.                                            "total
    >WRITE: 15 'TOTAL'(016), ls_stock-prgrp.
>
>ENDIF.
Are those for displaying some other information?
Also the problem of display you are facing can also be because there are no records to be displayed which satisfies the selection criteria.
Best Regards,
Rajesh.
Please reward points if found helpful.

Custom field not getting populated in the "Show Results where" drop down

Hi all,
In appointment detail page by clicking on Add button on the user related information section , it takes us to a search layout showing the list of available users.
Here we have to filter the user's based on a custom field which has already been created in the user object. But I am not able to add the custom field in the "Show results where" drop down for which the search has to be done.
It is getting reflected in the normal search layouts.So Can any one tell me why the change is not getting reflected in the user related info search layout?

I tested your use case and you are correct. I would recommend that you submit a service request to CRM On Demand customer care in reference to this issue.

Chat user is not getting message from the other users

In my application when user [A] initiate the chat with user[B] , I am facing following issues
-          User[B] is not getting initiation notification so that I am unable to open chat pod for user [A] on user[B] application
-          Due to above problem , User[B] not getting any message sent by the User[A]
-          User[A] can send only one message and it is displayed on simple chat pod
when User[A]tries to send more then one message it is not displayed on simple chat pod but on the console I can see the messages
following is sample code
public function connectChat() :void {
_collectionNode =
new CollectionNode();_collectionNode.sharedID = NOTIFICATION_COLLECTION_NODE;
_collectionNode.connectSession =
this.connectSession;_collectionNode.addEventListener(CollectionNodeEvent.SYNCHRONIZATION_CHANGE, onSynchronizationChange,
false, 0, true);_collectionNode.addEventListener(CollectionNodeEvent.ITEM_RECEIVE, onItemReceive,
false, 0, true);_collectionNode.subscribe();
/*** @private
* Handles the creation of a collection node if it does not already exist
protected function onSynchronizationChange(event:CollectionNodeEvent):void {
if (_collectionNode.isSynchronized) {
if (!_collectionNode.isNodeDefined(START_CHAT_LIST) && _collectionNode.canUserConfigure(connectSession.userManager.myUserID)) {_collectionNode.createNode(START_CHAT_LIST,
new NodeConfiguration(UserRoles.VIEWER, UserRoles.VIEWER, true, false, true,false, NodeConfiguration.STORAGE_SCHEME_QUEUE));}
public function connectChat() :void{
trace('connectChat');_collectionNode =
new CollectionNode();_collectionNode.sharedID = NOTIFICATION_COLLECTION_NODE;
_collectionNode.connectSession =
this.connectSession;_collectionNode.addEventListener(CollectionNodeEvent.SYNCHRONIZATION_CHANGE, onSynchronizationChange,
false, 0, true);_collectionNode.addEventListener(CollectionNodeEvent.ITEM_RECEIVE, onItemReceive,
false, 0, true);_collectionNode.subscribe();
/*** @private
* Handles the creation of a collection node if it does not already exist
protected function onSynchronizationChange(event:CollectionNodeEvent):void {
if (_collectionNode.isSynchronized) {
//Creates the nodes if they don't exist
if (!_collectionNode.isNodeDefined(START_CHAT_LIST) && _collectionNode.canUserConfigure(connectSession.userManager.myUserID)) {_collectionNode.createNode(START_CHAT_LIST,
new NodeConfiguration(UserRoles.VIEWER, UserRoles.VIEWER, true, false, true,false, NodeConfiguration.STORAGE_SCHEME_QUEUE));}
/*** Checks if a chat is going to be started with this specific user
protected function onItemReceive(event:CollectionNodeEvent):void {
var item:MessageItem = event.item;
var openChatEvent:OpenChatEvent = OpenChatEvent.ToOpenChatEvent( item.body, OpenChatEvent.OPEN_CHAT );
switch (item.nodeName) {
case START_CHAT_LIST:
trace("Starting Chat Notified");
if( openChatEvent.userId && openChatEvent.userId == this.connectSession.userManager.myUserID ){
this.dispatchEvent( openChatEvent );
if( this._collectionNode.isSynchronized )
this._collectionNode.retractItem( START_CHAT_LIST, openChatEvent.roomId );}
break;}
/*** Publishes a request for someone to join a chat
public function publishChatRequest(notificationEvent : NotificationEvent) :void {
if( this.connectSession.userManager.getUserDescriptor( notificationEvent.userID ) ){
var openChatEvent:OpenChatEvent = new OpenChatEvent( OpenChatEvent.PUBLISH_CHAT,null,notificationEvent.sharedID, notificationEvent.userNotificationList, null, notificationEvent.userID );
if( this.presenceUsers )openChatEvent.descriptors =
this.presenceUsers; _collectionNode.publishItem(
new MessageItem( START_CHAT_LIST, openChatEvent, openChatEvent.roomId ) );}
else{
Alert.show(
"User "+ notificationEvent.userID + " is not logged in.", "Publish Error" );}

A) are these methods copied twice in the code here on purpose?
   connectChat() and onSynchronizationChange is repeated in code due copy paste mistake
B) are both users subscribing to _collectionNode right away? Do each of them
get to onSynchronizationChange?
   Yes , each of them get to onSynchronizationChange
C) If you put a breakpoint in onSynchronizationChange, do you see the node
get created? Do you see it in the dev console?
Yes , it is creating a node
D) Is user B receiving an onItemReceive at all? Is user A?
Yes , it is creating a node
Now both the user getting chat message, have following issue
When user A initiate the chat with user B this action is not opening chat pod / window on user B end which shows user A has initiated chat with user B
But when user B click on user A name to initiate the chat, this action opens a chat window and user B can see message send by user A
Above scenario is not normal chat behavior in which other user gets the notification of chat . what could be the problem

Adobe Form not getting displayed on the portal

Hi,
From the MSS portal when I run the process, the associated adobe form(using HCM) doesn't get displayed on the portal. Initially the problem was with higher version of acrobat reader but now it is solved. Now I am not getting any error or warning but adobe form still not getting displayed.
Please help.

Later

User attributes not getting populated correctly on FIM

Hi All,
We have been facing an issue with the fimservice off late.
When a new account is created on FIM, we see that not all the values are populated on portal.
Looking at the logs, the Person object is getting populated and this is passed to the create method.
This issue does not occur every time and it used to work perfectly fine earlier. We have been noticing this problem off late and tht too only for a few set of users.
We recently had done a migration of 25k users. I am not sure if it is something related to the load on the DB.
Can you'll please help us out as we are running out of options!

No, it's not a problem of an UI (portal).
"We also wrote a script that would fetch all the details of the users from the FIM DB and the values are blank there too. so i'm guessing there's no problem with the portal." -
I hope you know that it is highly not recommended to do any operations on DB directly?
Ok, you say that you create user programmatically on FIM. Is it via PowerShell or another way? If attrbiutes are blank in Request - it seems that they are not passed to FIMService correctly. Maybe some special characters in those fields in source?
If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

Any iviews not getting opened from the portal content.

Hi,
Recenlty i found that the any of the iviews of the portal content are not getting opened.When i click on any of the iviews a blank page pops up.But the iviews when dispayed in the top level navigation gets opened there.Even the personalize option in the masthead pops with a blank screen.
Am not able to figure where the problem is exactly.Pls help.
Regards.
Adity.

We are using IE-7 and as per our clients requirements the portal has to be run on IE-7.May be this may be the browser problem but what settings i need to do to make all iviews running fine.This problem was not earlier but i am seeing this since a week.And all iviews pop up with a blank screen.
Regards
Adity

Drop down vales not getting populated all the records

Hi,
I have the scenario. Drop down has the values. But it is getting populated for only one record. Second record drop down is there, but values are not there.It is blank from second record.
Thanks
GJ

Hi ,
Sorry for the confusion.
I am working on xml schema offline scenario. I have 10 line items. It has one drop down list. I have populated the value in drop down. But in the first item drop down list, the first value is appearing as deafult one. From the second line item onwards, it is not appearing as default value. When you dropped down on the list, I can see all the values. I want all the drop down list, the first value should be appear as default value.
Thanks
GJ

Users details not getting populated in the portal tables..

Similar Messages

Maybe you are looking for