Users unable to access US content due to canadian external IP address

Hello there,
We have users in US who are required to access US websites for content searching but unable to do so because of their IP address is being Natted to external IP that is assigned in Canadian block.
We cannot use proxy servers due to legality.
any suggestions or recommendations ? 
Thanks 
M

Hi,
     Here is my working solution that I have used for years with StrongVPN.
http://forum.strongvpn.com/forums/topic/3480/cisco-ios-l2tp-working-connection-config
Hope this helps.
Cheers.
Jason

Similar Messages

  • When i drag and drop an image on my site. it gives the following error. "Unable to access local files due to browser security settings. To overcome this, follo"

    I am using the firefox version 17 and when i drag and drop an image on my website. It gives me the following error.
    Unable to access local files due to browser security settings. To overcome this, follow these steps: (1) Enter "about:config" in the URL field; (2) Right click and select New->Boolean; (3) Enter "signed.applets.codebase_principal_support" (without the quotes) as a new preference name; (4) Click OK and try loading the file again. Or go to the homepage for a link to the tutorial on how to do it.
    I have completed the above steps and it is still showing the same error message. Any help would be highly appreciated.
    Thanks.

    Thanks kumars ,
    I have a specific drag and drop area on our website. This works fine for all earlier releases of Firefox after these security settings
    "(1) Enter "about:config" in the URL field; (2) Right click and select New->Boolean; (3) Enter "signed.applets.codebase_principal_support" (without the quotes) as a new preference name; (4) Click OK and try loading the file again."
    Bust these settings not work for me in Firefox 17.
    Yes the drag and drop functionality is java script based and i am not using any script blocker addons.

  • I have Photoshop Elements 8 and upgraded to Plus but am unable to access themes, content , etc.

    I have Photoshop Elements 8 and upgraded to Plus but am not able to access themes, content, etc. that are Plus eligible. Any suggestions? I have tried twice through support and online to no avail.

    When I'm in Editor, I see the themes, some have a gold bar (which I understand is for Plus people) these are the ones that I can't use, when I click on them, nothing happens. When I click on the others they open fine. I haven't opened both Elements and Premier, just Elenments 8 as that is what I have. I'll check it out. Is it possible some some setting that needs to be changed? Thanks for your help!
    From: Steve Grisetti <[email protected]>
    To: Ina Kelly <[email protected]>
    Sent: Tuesday, June 21, 2011 9:16 AM
    Subject: I have Photoshop Elements 8 and upgraded to Plus but am unable to access themes, content , etc.
    Well, I don't work for Adobe or Photoshop.com -- and I don't know enough about your situation to even guess.
    But:
    a) You've logged in to Photoshop.com with both Photoshop Elements and Premiere Elements, right?
    b) Both programs are fully registered and activated using your Adobe ID, right?
    c) In Premiere Elements, under Themes, do you see any themes listed that have a blue or yellow ribbon over and upper right or upper left corner?

  • User unable to check in content in URM 10g

    We have a user that is unable to check in content in URM. the access provided to this user was added the same way as every other user within our organisation and there was also another user added the same time with identicle access who is not having any issues.
    The user is able to go through the entire check in process however as they select the 'check in' option at the end of completing metadata fields an error is thrown.
    ERROR:
    Content Server Request Failed
    Content item <undefined> was not successfully checked in. User 'username' does not have sufficient privileges.
    we have deleted the user several times, gone through providing the user with additional roles, checked logs but we cannot identify what the cause is. if the user is granted sysadmin access they can check in content but as soon as that access is reoved they can no longer.
    just to make this even more confusing lthe user is able to check in content in our test instance no problems.
    Any ideas as to what could possibly be causing this would be appreciated as we have run out.
    Cheers

    If you have taken a dump from somewhere and setting it up on ur local, you should cleanup the database a bit before actually deploying any project.
    I would suggest you rollback any of your current projects and run the following scripts to remove any staled/existing projects in CA.
    DELETE FROM EPUB_PR_HISTORY;
    DELETE FROM EPUB_PROC_HISTORY;
    DELETE FROM epub_proc_prv_prj;
    DELETE FROM EPUB_PROJECT;
    DELETE FROM EPUB_IND_WORKFLOW;
    DELETE FROM EPUB_PROC_TASKINFO;
    DELETE FROM EPUB_PROCESS;
    DELETE FROM EPUB_HIS_ACT_PARM;
    DELETE FROM EPUB_HISTORY;
    DELETE FROM EPUB_TASKINFO;
    DELETE FROM EPUB_DEP_LOG;
    DELETE FROM epub_file_asset;
    DELETE FROM avm_asset_lock;
    DELETE FROM dss_server_id;
    DELETE FROM dsi_server_id;
    commit;
    Now start your server again and check the deployment.
    Hopefully it should work!

  • User unable to access OWA

    User is unable to access OWA any pointers.. getting the below error pls Thanks
    The item can't be opened because it's become corrupted.
    Request
    Url: https://ukexchange.abc.com:443/owa/lang.owa
    User: Wes, Aurélia
    EX Address: /O=abc/OU=London/cn=Recipients/cn=AWes
    SMTP Address: [email protected]
    OWA version: 14.3.123.3
    Exception
    Exception type: Microsoft.Exchange.Data.Storage.CorruptDataException
    Exception message: Can't save invalid object Wes, Aurélia.
    Call stack
    Microsoft.Exchange.Data.Storage.ExchangePrincipal.Save()
    Microsoft.Exchange.Clients.Owa.Core.RequestDispatcher.DispatchLanguagePostLocally(OwaContext owaContext, OwaIdentity logonIdentity, CultureInfo culture, String timeZoneKeyName, Boolean isOptimized, String destination)
    Microsoft.Exchange.Clients.Owa.Core.RequestDispatcher.DispatchLanguagePostRequestFromProxy(OwaContext owaContext)
    Microsoft.Exchange.Clients.Owa.Core.RequestDispatcher.PrepareRequestWithoutSession(OwaContext owaContext, UserContextCookie userContextCookie)
    Microsoft.Exchange.Clients.Owa.Core.RequestDispatcher.AcquireAndPreprocessUserContext(OwaContext owaContext, HttpRequest request)
    Microsoft.Exchange.Clients.Owa.Core.RequestDispatcher.InternalDispatchRequest(OwaContext owaContext)
    Microsoft.Exchange.Clients.Owa.Core.RequestDispatcher.DispatchRequest(OwaContext owaContext)
    Microsoft.Exchange.Clients.Owa.Core.OwaRequestEventInspector.OnPostAuthorizeRequest(Object sender, EventArgs e)
    System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
    System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
    Inner Exception
    Exception type: Microsoft.Exchange.Data.DataValidationException
    Exception message: The property value Aurélia Wes is invalid. The value can contain only 'a', 'b', 'c', 'd', 'e', 'f', 'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p', 'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z', 'A', 'B', 'C', 'D', 'E', 'F', 'G', 'H',
    'I', 'J', 'K', 'L', 'M', 'N', 'O', 'P', 'Q', 'R', 'S', 'T', 'U', 'V', 'W', 'X', 'Y', 'Z', '0', '1', '2', '3', '4', '5', '6', '7', '8', '9', '"', ''', '(', ')', '+', ',', '-', '.', '/', ':', '?', ' '.
    Call stack
    Microsoft.Exchange.Data.Directory.ADSession.Save(ADObject instanceToSave, IEnumerable`1 properties)
    Microsoft.Exchange.Data.Storage.ExchangePrincipal.Save()

    Hi,
    We can use the New-MailboxRepairRequest cmdlet to detect and repair mailbox corruptions. For more information about it, please refer to:
    http://technet.microsoft.com/en-us/library/ff625221(v=exchg.141).aspx
    Hope it helps.
    Thanks,
    Winnie Liang
    TechNet Community Support

  • Users unable to access the internet sites

    Hi Everyone,
    We have users who are able to get the IP address but unable to access any internet sites.
    I check the trap logs on the WLC
    RADIUS server 192.168.50.1:1812 failed to respond to request (ID 16) for client 88:53:2e:99:24:b5 / user 'unknown'
    RADIUS server 192.168.50.1:1812 activated on WLAN 1
    RADIUS server 192.168.60.1:1812 deactivated on WLAN 1
    RADIUS server 192.168.60.1:1812 failed to respond to request (ID 200) for client 88:53:2e:99:24:b5 / user 'unknown'
    RADIUS server 192.168.60.1:1812 activated on WLAN 1
    RADIUS server 192.168.50.1:1812 deactivated on WLAN 1
    RADIUS server 192.168.50.1:1812 failed to respond to request (ID 15) for client 88:53:2e:99:24:b5 / user 'unknown'
    RADIUS server 192.168.50.1:1812 activated on WLAN 1
    RADIUS server 192.168.50.1:1812 failed to respond to request (ID 16) for client 88:53:2e:99:24:b5 / user 'unknown'
    RADIUS server 192.168.50.1:1812 activated on WLAN 1
    RADIUS server 192.168.60.1:1812 deactivated on WLAN 1
    RADIUS server 192.168.60.1:1812 failed to respond to request (ID 200) for client 88:53:2e:99:24:b5 / user 'unknown'
    RADIUS server 192.168.60.1:1812 activated on WLAN 1
    RADIUS server 192.168.50.1:1812 deactivated on WLAN 1
    RADIUS server 192.168.50.1:1812 failed to respond to request (ID 15) for client 88:53:2e:99:24:b5 / user 'unknown'
    RADIUS server 192.168.50.1:1812 activated on WLAN 1
    Need to know  how can i troubleshoot this further?
    Regards
    Mahesh

    I would do the troubleshooting in  following sequence.
    1. Put a wired PC on to the vlan allocated for WLAN1
    2. Check whether wired PC gets an IP & can browse internet
    3. If that works, then we know no issue of DHCP & not issue with L3/NAT routing to access internet
    4. If step2, does not work then your issue is not within wireless, you have to change the focus of your troubleshoot.
    5. If step2 works, then test a wireless client with OPEN Authentication (No ACS involvment).If this does not work,then it means wireless client does not get proper IP connectivity. Check dynamic interface configuration for this WLAN & make sure gateway addresses correctly configured. Also VLANs are trunk across to WLC from switch.
    6. If step5 works, then try your client with ACS & see the client get successfully authenticated. If not it may be WLC to ACS issue. Troubleshoot that in that case.
    Do some troubleshooting like this & let us know the outcome. I am sure you will abe to find out the issue easily in this way.
    HTH
    Rasika

  • User unable to access Leave Request in Portal

    Hello guys,
    A user can't access the leave request via Enterprise Portal 7.0 - the view works perfectly with the other users thus the issue seems to be isolated to this particular user. IE version being used is IE 6.0 - so that shouldn't be the cause of the problem. Also, the roles have been cross-checked and synchronized with the other users who are able to access the Leave Request function. Yet, it appears the roles are correctly assigned
    Could it be possible that this is a problem with the user's data? Which component should I also look into?
    Thank you in advance!
    Regards,
    Jan

    As for the IE patch problem, we're conducting an http-trace to check with this. But I see this as very unlikely, since the user also tried accessing it via a different workstation but the problem persists.
    The 'resolution' for similar cases was to recreate a user account - even just a direct copy of the same user works. This could be an SAP application bug perhaps? The target is for a long term fix to the problem.
    Thanks!
    Regards,
    Jan

  • VPN users unable to access internal network - ASA 8.3.1

    Hello,
    I have a base config of AnyConnect VPN below, however the ASA 8.3.1 code has deprecated some commands and the VPN/NAT/FW rule syntax is quite different. Can someone point out what's missing from the pertinent config below that prevents the VPN Pool from accessing the internal LAN?
    The Core LAN router is 1.2.3.1.
    ASA Version 8.3(1)
    interface Ethernet0/0
    nameif inside
    security-level 100
    ip address 1.2.3.2 255.255.255.0
    ip local pool anyconnect-vpn-pool 1.2.9.10-1.2.9.20 mask 255.255.255.0
    object network DataVLAN
    subnet 1.2.3.0 255.255.255.0
    object-group network Internal-Data
    network-object object DataVLAN
    nat (any,any) after-auto source dynamic Internal-Data Outside_INT
    route inside 1.2.0.0 255.255.0.0 1.2.3.1 1
    dynamic-access-policy-record DfltAccessPolicy
    webvpn
    enable outside
    svc image disk0:/anyconnect-win-2.5.2014-k9.pkg 1
    svc enable
    group-policy DfltGrpPolicy attributes
    vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn
    address-pools value anyconnect-vpn-pool
    group-policy GroupPolicy1 internal
    group-policy GroupPolicy1 attributes
    address-pools value anyconnect-vpn-pool
    group-policy vpn-anyconnecct-policy internal
    group-policy vpn-anyconnecct-policy attributes
    vpn-tunnel-protocol svc webvpn
    webvpn
      url-list none
      svc ask enable
    tunnel-group vpn-users type remote-access
    tunnel-group vpn-users general-attributes
    address-pool anyconnect-vpn-pool
    default-group-policy vpn-anyconnecct-policy
    tunnel-group anyconnect2 type remote-access
    tunnel-group anyconnect2 general-attributes
    address-pool anyconnect-vpn-pool
    TIA.
    Mike

    Hi Rohan,
    Are you saying to replace "nat (any,any)" with "nat (inside,outside)"? I was wondering about this because I'd always done "nat (inside,outside)" but a colleague had performed the initial configuration which already contained "nat (any,any)" statement and I was not sure if this was just something new in 8.3.1. I also noticed the "global" command is no longer available.
    I will give this a try. Thanks.
    -Mike

  • Unable to access the content of a Window (PopUp)

    Hi,
    I am trying to access the contents of a MovieClip I placed
    inside a PopUpWindow component, but can't figure how to do that. I
    have created the window with something like this:
    var SAedit_win:MovieClip =
    mx.managers.PopUpManager.createPopUp(_root, Window, true,
    {closeButton:true, title:"Arterias Sistemicas",
    contentPath:"contentSA"});
    With this code, the window IS correctly created and the
    "contentSA" MovieClip (which is in the library) is correctly shown.
    However, I wanted to access objects inside "contentSA", but I can't
    find a way to do that. I have already tried:
    - SAedit_win.content (which is read-only...)
    - SAedit_win.contentsPath (which obviously didn't work)
    - SAedit_win.target
    - SAedit_win.contentSA
    Can anybody please help me with that?
    Tanks in advance
    JLonardoni

    I believe I was not very clear in my post... What I want is
    to address a MovieClip inside a Window component I created. I used
    the PopWindow Manager to create the Window instance, and attached
    the MovieClip using the contentPath variable. The problem is that
    now I have no reference to my MovieClip, and thus, I can't access
    objects inside it.
    Is there any other way to create a window using the Window
    component, so that I could have access to my MovieClip?
    Thanks again!

  • Unable to access reports/content in Infoview

    I have a strange issue in InfoView. It was working normal till yesterday.
    Once I login into InfoView, clicking on "documents list" does not take me any further. Clicking on My favorites does the same. The log out option is no more available once I login. Same issue when clicking on preferences.
    I have no problems accessing content/reports through the rich client and widgets, that part works fine.
    I have tried logging in with Administrator and users with full control. And I have checked the user security on InfoView application in CMC.
    Version of IE is 8.0.7601.17514 and this is happening on both Win 2008 and Win 7....(but it has always been working till yesterday).
    Browser zoom is set to 100% and IE compatability mode is enabled.
    I also tried in firefox but with no luck.
    Any suggestions appreciated.

    Thanks for the response.
    It turned out to be that the InfoViewApp and InfoViewAppAction files in TomCat somehow got corrupted. Once we redeployed them, InfoView starting working normal. So the issue has been resolved.

  • Windows Users Unable to Access SL Server

    I am attempting to have Windows clients access the SL server as AD users. I have AD/OD configured in a Magic Triangle with 10.5 and 10.6 clients being managed properly and accessing everything normally. smb services are enabled, all users and groups appear to have access according to Server Admin but I cannot login to the SL server as an AD user from a W2K machine. I'm probably missing something obvious, so I apologize for any ignorance on my part. Any ideas on how to gain access under Windows are welcome.

    Hi
    As per the information and details provided by you, to access OWA in Exchange 2007, please follow these steps: -
    Open
    Active Directory users and computers.
    Click on the
    View, and then click Advanced Features.
    Note:
    To make the
    Security tab available at both the user level and the organizational unit level, You must enable the Advanced features option in Active directory Users & Computers.
    This option will be available in the
    View tab.
    Open the properties for both the user level and the organizational unit level that the users are located in, and then locate the
    Security tab.
    Click on the
    Advanced.
    Make sure that the following check box is selected:
    Allow inheritable permissions from the parent to propagate to this object and all child objects. Include these
    with entries explicitly defined here.
    Force Active Directory replication.
    I hope this information will be helpful for you.
    Thanks and regards
    Shweta@G

  • Unable to access important website due to Firefox security error

    I am trying to access my account on a financial services website that is very important to me. I get an Untrusted Connection screen from Firefox and when I click on "add an exception" nothing happens. How can I bypass BIG BROTHER and access this website? Thank you.

    Have you checked the date and time set on your computer?
    #Right-click the calendar/clock at the right end of the Windows task bar (bottom of your screen, usually), choose "Adjust Date/Time".
    #If time/date is not holding, you may need a new "coin" battery on your motherboard.
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

  • I am unable to access songs that were bought using old email addresses.  The addresses no longer exist.   How can I fix this?

    I cannot listen to music that I purchased from I tunes years ago, using various email accounts, and various computers.  I no longer have those email accounts, so I cannot access the password retrieval from them.  I also tried the security questions, and I tunes won't let me access the music that way either.  What do I do?  All the account names I ever used have been with my name and personal information.  Is there someone I can call?

    Why are there multiple accounts? Simply change the email address associated with the account when changing email accounts for whatever reason.
    If you are no longer able to access the account and cannot log in using the Apple ID, contact iTunes Customer Support via Express Lane.

  • Unable to access web pages by typing in the IP address in the address bar?

    I hooked up a HP 7520.  HP was walking me through some set up options and they asked me to type in the IP address 10.0.1.3 into the addrss bar to bring up the web page.  Page remains blank or I get the Safari can't connect to the server.  HP stated it was an issue with the setting on the Airport Express.  What should the setting be in order for the IP address to load?

    10.0.1.3 is a local network IP address. I am assuming that is the IP address of your HP 7520. Since this is a local address there is no additional settings on the AirPort Express that you can make.
    I am assuming that you have your Express in its default mode. That is, it is acting as in wireless router and that it is connected directly to your Internet modem ... correct?
    If so, your Express will hand out local IP addresses in the 10.0.1.2 to 10.0.1.200 range. Note that this is a dynamic address. The provided IP addresses may change over time which is what I think has happened in your case. By that I mean, you HP received a new IP address and why you can find it in the web browser at 10.0.1.3.
    What I would recommend that you do is assign a "static" local IP address to the HP. You can do this using the AirPort Utility. Specifically, you want to set up a DHCP Reservation for this device.
    To do so:
    Run the AirPort Utility.
    Select the AirPort Express, and then, select Edit.
    Select the Network tab.
    Under DHCP Reservations, click on the plus button.
    For Description, enter: HP 7520 or anything else you like.
    Reserve Address By: MAC Address
    MAC Address: Enter the MAC Address of the HP. This would either be the HP's Ethernet or wireless address whichever is appropriate on how you have it connected to the network.
    IPv4 Address: Choose an IP address between 10.0.1.2 & 10.0.1.200. This will be the IP address that you will reserve for the HP.
    Select Save.
    Select Update and allow the Express to restart.

  • Unable to access contents of "Out" box

    This forum was extremely helpful last time I encountered a mysterious snafu, so I am looking for help again.
    Whenever I open my Mail application, the window that shows first is whichever mailbox (In, Out, Drafts, Sent, Trash, etc.) I had open when I last quit the program. If this original window happens to not be the list of emails I need to begin my task, I will click on another of the mailbox or folder listings showing in the side 'drawer', extending left or right of this Mail window (i.e. to read new In mail). All of these mailboxes, with the exception of the "Out" box, are immediately preceeded by a right pointing arrow (flag?), which when clicked turns down and reveals the multiple contents therein. Also, the "In" box in this drawer always indicates in parentheses and bold italics the number of unread e-mails, when applicable.
    Recently, random emails have been getting caught in the "Out" box (not being sent), and the "Out" box in my side drawer now indicates in bold parentheses that there are seven emails trapped there, and I am unable to access the contents of this mailbox to attempt to re-send the emails that are occasionally getting stuck there. Normally, I have been able to still send email most of the time since noticing this situation, and there appears to be no obvious pattern regarding which mail does actually get sent and which gets jammed up in this "Out" box. When I do click on the "Out" mailbox (the only one with no arrow), the resulting "Out" window indicates 0 messages (0 bytes), yet as mentioned, it suggests a content of seven emails in the mailbox list of the drawer.
    First, how can I get to these inaccessible emails to either delete or re-send them? Next, how can I prevent future emails from randomly getting trapped and becoming lost, and why isn't my "Out" window showing a list of these seven emails much like any other mailbox will show all of its contents? Lastly, is there something on my hard drive which requires reconfiguration?
    Thanks in advance for any helpful comments.

    I don't know how helpful this will be, for previously there was a poster here, David Gimeo Gost who is a guru with Mail, but he has not posted for a long time. As your post is getting old, here is an attempt to offer some advice.
    The outbox is, as you have probably guessed, the repository for emails that failed to send, usually because the intended recipient's server is down, and they will sit there temporarily until Mail tries to send them later. Another possibility is that the address is invalid.
    If either of these things happen, you will be informed that it could not send the email and place it in your outbox until it tries again later. You should be able to see the contents.
    If the outbox shows (7) items but on clicking on it there are none, and you have not received any message notifying you of failed delivery, then it may well be that there is nothing in there, and that the supposed (7) emails is some display error occurring in Outbox.
    If you agree with this line of thought, you could simply delete the outbox by
    1. Have Mail closed.
    2. locate the ~/Library/Mail/Mailboxes/Outbox.mbox
    and drag it to the Desktop. Opening Mail will create a fresh one, and hopefully one that shows no 'phantom emails'. You can always save the old one in another location until you are satisfied that there was nothing that failed to send.
    One thing to be mindful about is that when Mail's mailboxes get too large, erratic behaviour can result. In 10.3 this can happen if your mailbox starts to build into several hundred MBytes or more.
    Message was edited by: roam

Maybe you are looking for

  • How to view XML file generated by Reports 6i in browser ?

    Hi, I have generated a report in XML file format. However, when I open this file in a browser, it displays the contents in the browser in the following fashion : <?xml version="1.0" ?> - <!-- Generated by Oracle Reports version 6.0.8.8.3 --> - <MSIO1

  • Reading MPP file using MPXJ lib. from sourceforge?

    Hello, MPP file is getting read using(sourceforge mpxj lib) java but not in the proper hierarchical manner I want to read the subtask and add into databse.please suggest the solution!!!!!!!!!!!!!!!!!!!!!!!!! Thank You, Deepali Khape

  • Can a processor in an ipad be replaced?

    I was recently informed the processor in my ipad is broken, can this be fixed or replaced?

  • New javascript functions

    In looking through the new javascript libraries in ApEx 2.2 I've found this: function html_DisableOnValue(pThis,pValue,pThat) but there doesn't seem to be a corollary enable operation. Is there any good reason for this? Earl

  • Moving servers to different country - Effects on Certificates?

    Hi, We are in a process to move all our SAP servers from one country to another. After the move, the IP address, hostnames and the actual servers will get changed for all SAP systems. When the servers will be moved, we are analyzing the affect on the