Users with IE 9 64 bit on windows 7 machine

I have a few users (not all) that are experiencing Internet Explorer crashes when using CRM through Internet Explorer in a 64 bit browser session on a windows 7 64 bit machine. Has anyone else come across this? The users do not experience the crash when
using CRM through Outlook however the experience is slower for them. I have them using the 32-bit internet explorer to see if they still get the crashes.

Jennifer,
Did you look in event viewer, into Application section to determine exact module on which IE crashes?
Roman Rudenko
[email protected]
www.c360.com

Similar Messages

Hi all, i can't sync over wifi between my iPhone 4 and Windows 7 64 bit, wifi sync works with the same phone and my Windows 8 machine, tried solutions from other threads with no luck, just thought i'd see if anyone else had any ideas, thanks.

Hi all, i can't sync over wifi between my iPhone 4 and Windows 7 64 bit, wifi sync works with the same phone and my Windows 8 machine so the problem seems confined to Windows 7. I've tried solutions from other threads -
Making sure everything is allowed through firewall
Rebooting phone/laptop/router
Disabling ipv6
Disabling all networks except the one curently on
Re-installing iTunes
Restoring iPhone
No luck with any of those unfortunately so i just thought i'd see if anyone else is still without wifi sync after trying those as well and if you ever found a fix, thanks.

I just wanted to leave a note that it's working now. I'm not sure if it was the latest iTunes update that got it working or that i decided to start a new library instead of using the one i had backed up on Windows 8 (it didn't occur to me to check using the old library when i re-installed iTunes). But if anyone is having this problem, it might be worth trying again with a new installation of iTunes to see if the latest update works for you, and if not, try using a fresh library instead of a backup (by fresh library i mean discard your old library completely and start a new library, not just restore as new iPhone, a whole new library).

Windows 8.1 update 1 - users with domain mandatory profiles cannot open windows 8.1 Store

Hi,
After the update 1 on windows 8.1. All of our domain users get "you cannot access the windows store because you're signed in to this pc using a temporary or guest account......" while opening windows 8.1 store. All my users use mandatory
profiles. Could some one guide me onto:
-how and what changes should I make on my base image of 8.1?
-how/where what changes should I make on the domain in Group policy to make my profiles work?
-I also run sccm 2012 R2 if that makes the things easier I can use it for deploying store apps, but I prefer to make a base windows 8.1 image throw all required apps on it. I would like to make sure that my domain user can open up windows store after
that I can capture this image and deploy.
                              Need help thanks
                              Note: Before this update 1 of windows 8.1 things worked great.

Thanks Kate Li,
Domain profile is not corrupt. I have checked the registry settings. In my question I am mentioning that I am using mandatory profiles for domain users. Need help.
I am on update 2 now and the same error for domain users with mandatory profiles.
Also error 1001 is generated every time the user tries to open the store(the user with mandatory profile)
Log Name:      Application
Source:        Windows Error Reporting
Date:          9/30/2014 8:52:17 AM
Event ID:      1001
Task Category: None
Level:         Information
Keywords:      Classic
User:          N/A
Computer:      TCO-TTTEST.mydomain.com
Description:
Fault bucket , type 0
Event Name: WWAJSE
Response: Not available
Cab Id: 0
Problem signature:
P1: winstore_1.0.0.0_neutral_neutral_cw5n1h2txyewy
P2: Windows.Store
P3: 3e43
P4: FFFFFFFE
P5: (null)
P6: 0_0
P7:
P8:
P9:
P10:
Attached files:
ErrorInfo.5160.3992.txt
C:\Windows\WinStore\AppXManifest.xml
These files may be available here:
Analysis symbol:
Rechecking for solution: 0
Report Id: 9b46f622-48a0-11e4-bec5-6036dd67e10b
Report Status: 262144
Hashed bucket:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows Error Reporting" />
    <EventID Qualifiers="0">1001</EventID>
    <Level>4</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-09-30T12:52:17.000000000Z" />
    <EventRecordID>366588</EventRecordID>
    <Channel>Application</Channel>
    <Computer>TCO-TTTEST.mydomain.com</Computer>
    <Security />
</System>
<EventData>
    <Data>
    </Data>
    <Data>0</Data>
    <Data>WWAJSE</Data>
    <Data>Not available</Data>
    <Data>0</Data>
    <Data>winstore_1.0.0.0_neutral_neutral_cw5n1h2txyewy</Data>
    <Data>Windows.Store</Data>
    <Data>3e43</Data>
    <Data>FFFFFFFE</Data>
    <Data>(null)</Data>
    <Data>0_0</Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
ErrorInfo.5160.3992.txt
C:\Windows\WinStore\AppXManifest.xml</Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>0</Data>
    <Data>9b46f622-48a0-11e4-bec5-6036dd67e10b</Data>
    <Data>262144</Data>
    <Data>
    </Data>
</EventData>
</Event>
Thanks
Followed :
http://support2.microsoft.com/kb/2890783 Made a brand new profile. No luck same error.

2 Users with the same name/shortname on the same machine

Hello,
What will happen if:
There is a local user called Bob and a network user on a server called Bob? Before you even post anything, please let me know if you have actually SEEN this before. I know something will happen, I just don't know what. Again, 2 different users with the same name. YES it is possible to create, but I have not tested it yet. One home is on the local machine and the other is a network home directory. I didn't post this in the server section for this reason...the question is about a client machine running 10.5.4 not server, so it belongs here! Thanks to all who help and my guess is a dialog box pops up with a choice of network or local? Not sure, but it is going to be quite an interesting topic.

Thank you both. It seems I need to test this because it doesn't seem anyone has ever run into this situation. The first thing I need to ask is will it do any damage to the system files if a user logs in with the same resolving name?I know I know the UIDs are different, but maybe have the same shortname? Not sure if it will work. The network users authenticate via LDAP and the server is set to an Open Directory Master. Now as for the client machine:
#1 - If I create both test users (local and network), will I be able to set the network as a Mobile Home Directory even though there is an existing home folder for the local user?
#2 - I want one specific user to have the same login name and password, but a different login "reaction" when the user logs in depending on the location. For example, I have a current network user Bob, password 1234 who is logged in and connected to the server. He finishes working on his project at the office and then goes home for the day. When he gets home, I want his to be able to login with the user name Bob, connecting to the local account on his machine. I DO NOT want to user PHDs, but rather have two separate home folders for the same resolving login user name! I know it is a lot to ask for but, here is my next question...
#3 - If I create two different home folders for the same resolving name, but they are accessed in two different locations, one with a server LDAP authentication and one locally (127.0.0.1), will it work?
I really appreciate the replies, but I am looking for more of straight forward answers rather than an example and background information. Thank you.

Spartan 3E with Labview 2012 (32 bit) on WIndows 7 64-bit - Error Code: -310602 NI-COBS: Unable to communicate with device over communication cable.

Thanks for the info, Kyle. I will probably try to find an older 32-bit XP machine. VM is just not an option for me right now.

Hello everybody,
I am trying to use the DIgilent Spartan 3E board with Labvew 2012 SP1 32 bit. I am able to compile the example code for LED shift. I am however unable to transfer code to the FPGA. I get the following error message:
Error Code: -310602
NI-COBS: Unable to communicate with device over communication cable.
Please verify that the cable is connected to a supported device and that the appropriate drivers are installed.
My system configuration is as follows:
Windows 7 (64 bit) on Dell XPS laptop.
Labview 2012 SP1 (32 bit)
Labview FPGA 2012 SP1
Labview 2012 FPGA support for Spartan3E
Xilinx 13.4 tools
DEFB LV FPGA 2012sp1 support installer
Xilinx USB cable driver v1.3 installed.
I took all the precautions mentioned by others on this forum and others, mainly that the cable must be disconnected before installing the Xilinx cable driver. All software and drivers were installed correctly. I even uninstalled and reinstalled the entire Labview software set I had. I still get the same error.
A few other questions:
1. Is the Xilinx cable different from a regular USB cable of the same configuration ?
2. When I program the FPGA I only have the USB cable connected between my computer and the Spartan 3e board. Should any other cable be connected ?
3. What should be the correct jumper settings for J1 - JP30 (especially J30, J11, JP9, JP6, JP7, etc) ?
I have been at this or over 3 days trying to figure it out. Any help will be greatly appreciated.

Flash Player 13.0.0.206 not working with IE 11 (32 bit) using Windows 7 64 bit OS but does work in Chrome

When I go to some websites (https://www.facebook.com/photo.php?v=335893426565493) for one, I get a white screen where the flash video should be displayed. I can hear the audio just fine. Right-clicking on the white area brings up the settings menu and the video can be seen dimly in the background. The video drivers are up-to-date. I have uninstalled the flash player, emptied all of the suggested folders and re-installed Flash with exactly the same results. I have disabled hardware acceleration with no change as well. I have also tried compatibility mode to no avail.
Going to the Flash websites, I can see all of their animations and the boxes that show the currently installed version all show correctly.
Any suggestions?

Chrome uses a separate and independent plug-in than IE does.
IE is ActiveX - Chrome ISN'T.
Chrome is PPAPI - IE is NPAPI.
The ActiveX plug-in is in C/Windows/System32/Macromed/Flash and C/Windows/SysWOW64/Macromed/Flash - PepperFlash is in C/Program Files (x86)/Google/Chrome/Application/[version number]/PepperFlash.
The trouble with IE in general is that you need to disable ActiveX filtering for most everything, which leave the browser vulnerable to attacks. ActiveX Filtering in Internet Explorer
The trouble with IE11 is "User Agent Strings".
Microsoft "rewrote" the User-Agent Strings for the abomination they call their latest and greatest browser (Read more here).
User-Agent Strings are what websites use to identify the browser you're using and provide the proper content for it's browser engine, like ActiveX stuff, and Flash or HTML5 video.
Thanks to the geniuses in Redmond, WA, the User-Agent Strings for IE11 (which has a Trident engine), ID it as either "Gecko" (Firefox) or "Webkit" (Chrome).
Trouble is: when the site the directs to the content for one of these two engines, the Trident engine in IE can't interpret it and the site then sees IE as an "unidentified" browser.
The problem with an unidentified browser is that the plug-ins in that browser aren't recognized either, so even though you're up to date, it says you need the latest Flash Player when you use IE11.
YouTube... has converted to HTML5 video so if it doesn't detect Flash Player, it can display HTML5 (MP4) video which requires no plug-in to play.
Facebook can't do that, because HTML5 doesn't apply to games... only video.
Microsoft has no plans to "fix" the mess they've created because they think it's a great idea to block you out of the websites you visit.
They recommend using "Compatibility View" and pretending that you're using an older version of IE...
The Problem with THAT is that it's seen limited success, and you have to enable it for EVERY page that has problems... individually.
I'm not big on "pretending" so I recommend actually using another browser.
Firefox (from Mozilla)
Opera (from Opera)
Safari (from Apple)
Chrome (from Google)
ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that, because it has its own Flash Player plugin built in.

HT1461 how do i know if my mac works with 32 or 64 bit of windows 7

Any clue? Thanks

See > http://support.apple.com/kb/HT1846 This site will tell you if you can install a 32 or 64-bit Windows version on the computer. In most of the cases, you can install the version you want but in other cases, you have to install the 32-bit edition (on old computers) or only the 64-bit version (on new computers)

7th gen nano will not sync with I tunes 64 bit on windows 8.1

Apparently there was a thread regarding this a day or so ago and someone posted that you have to hide the left tool bar. I cannot find the function under the view menu to do so. Can someone possibly explain why this is happening. Its not that my music will not sync. Its that the I Tunes cant even see the ipod.

backroll2blind,
The article linked below details a number of steps that can help get iTunes to recognize your iPod.
iPod not appearing in iTunes
http://support.apple.com/en-is/HT203449
All my best,
Allen

Getting Error 08 when attempting to build exe using LabVIEW 2009 (32 bit) and Windows 7

Testing development platform on Window 7 vs XP. I received following message while building an executable using 2009 32 bit on Windows 7 machine. Same build will work on an XP machine.
Error 8 occurred at Copy in AB_Engine_Copy_Error_Files.vi->AB_Application.lvclass:Copy_Error_Files.vi->AB_Application.lvclass:Copy_Files.vi->AB_EXE.lvclass:Copy_Files.vi->AB_Build.lvclass:Build.vi->AB_Application.lvclass:Build.vi->AB_EXE.lvclass:Build.vi->AB_Engine_Build.vi->AB_Build_Invoke.vi->AB_Build_Invoke.vi.ProxyCaller
Possible reason(s):
LabVIEW: File permission error. You do not have the correct permissions for the file.
=========================
NI-488: DMA hardware error detected.
C:\Program Files (x86)\National Instruments\Shared\LabVIEW Run-Time\2009\errors\Internet Toolkit-errors.txt
Any suggestions?
Thanks

For any who may be having this problem here is a little more information and what I did to get around the issue. (so far)
First I tried a simple vi with a while loop in a project and made an executable build. This worked. I double checked on an XP machine the project that I was having problems with. The executable was built successfully. I changed back to the Windows 7 machine. On the program compatibility trouble shooter I started the LabVIEW 2009 (32 bit) in the XP service pack 2 mode and selected run as administrator. The build was successful.
Note: was logged in as administrator and program would build a simple executable in Windows 7. The executable that would not build had more complex code that included serial communication and calls to lvanlys.dll and nilvaiu.dll.
This may not be a complete fix to the problem but at least in this one case it worked.

Cannot join Windows XP machines to the Mac PDC domain

Frustrated...
Yesterday, I was able to successfully add 5 Windows XP machines to the Mac PDC Domain (lets call it xyz.lan). Those machines show up as valid computer accounts in Workgroup Mananger (PC1$, PC2$, etc.). Users are able to logon to those Windows XP machines using their Mac Open Directory user account and access their home folder, etc.
This morning, for some reason, I can no longer join XP machines to the Mac PDC domain. On both PCs I tried it with, I receive a "Insufficient System Resources exist to complete the requested service" on the Windows XP machine. I am using the diradmin user account and password to supply credentials. Same exact process as yesterday (which worked fine).
A couple things of note. I made sure the PDC domain is set to Enabled for allowing Guest Access and that WINS Registration is also enabled. Authentication is lso set for NTLMv2 and NTLM for enabled. I also tried rebooting the server this morning as well. It's running 10.5.4. This was not an upgrade from 10.4, but a fresh install of Leopard.
No changes were made on the server between yesterday and today that I am aware of.
Looking at the /var/log/samba/log.smbd log, there are thousands of entries for "This process has forked and you cannot use this corefunctionality process, You must EXEC()" etc... The log also shows failures when the XP machine tries to join to the domain. Log entries are listed showing, "pdbdefault_createuser: failed to add new account for 'PC6$'". Adding PC6$ manually via Workgroup Manager doesn't help either.
Any idea what to check next? I read so many varied things about Leopard and SMB not quite playing nice. People mentioning they had to go through all sorts of hurdles to get this working. Any advise is welcome.

Any news about this? I'm having the same problem trying to join a Vista box to the domain. Here are the logs:
[2009/04/22 13:25:25, 0, pid=42167] /SourceCache/samba/samba-
187.8/samba/source/passdb/pdbodsam.c:odssamgetsampwnam(1571)
opendirectorysamsearchname gave -14136 [eDSRecordNotFound]: no
dsRecTypeStandard:Computers record for account 'VISTA-02$'[2009/04/22 13:25:25, 0, pid=42167]
/SourceCache/samba/samba-187.8/samba/source/passdb/pdbodsam.c:odssamgetgrnam(2040)
odssam_getgrnam gave -14136 [eDSRecordNotFound]: no dsRecTypeStandard:Groups record for
'VISTA-02$'!
[2009/04/22 13:25:25, 0, pid=42167] /SourceCache/samba/samba-187.8/samba/source/passdb/pdbodsam.c:odssamgetsampwnam(1571)
opendirectorysamsearchname gave -14136 [eDSRecordNotFound]: no dsRecTypeStandard:Computers record for account 'VISTA-02$'
kDSStdAuthNewUser was successful for account "vista-02$"
kDSStdAuthNewUser accountid len(375)"0x49ef53056eb8a2630000009a00000214,1024 35
129849767195843988386717130686365750405143149807097035240997923637742337040903
506153973871003812041813
324419007326669993686871371821246150609561416487672279816850996014745064297496
041484464380321772803933500334864635264176672399865926313147079923364167109976
966344241501266923849093477
545323065093504527714303 [email protected]"
<CFArray 0x127bb0 [0xa087e1a0]>{type = mutable-small, count = 1, values = (
0 : <CFDictionary 0x10fa70 [0xa087e1a0]>{type = mutable, count = 3, capacity = 3, pairs = (
0 : <CFString 0x127230 [0xa087e1a0]>{contents = "dsAttrTypeStandard:RecordName"} = <CFArray 0x1273d0 [0xa087e1a0]>{type = mutable-small, count = 1, values = (
0 : <CFString 0x127830 [0xa087e1a0]>{contents = "passwordserver"}
1 : <CFString 0x12b1b0 [0xa087e1a0]>{contents = "dsAttrTypeStandard:PasswordServerLocation"} = <CFArray 0x1276e0 [0xa087e1a0]>{type = mutable-small, count = 1, values = (
0 : <CFString 0x128030 [0xa087e1a0]>{contents = "10.10.1.102"}
3 : <CFString 0x10b150 [0xa087e1a0]>{contents = "dsAttrTypeStandard:AppleMetaNodeLocation"} = <CFArray 0x127b60 [0xa087e1a0]>{type = mutable-small, count = 1, values = (
0 : <CFString 0x125b80 [0xa087e1a0]>{contents = "/LDAPv3/127.0.0.1"}
[2009/04/22 13:25:26, 0, pid=42167] /SourceCache/samba/samba-187.8/samba/source/passdb/pdbodsam.c:odssamgetsampwnam(1571)
opendirectorysamsearchname gave -14136 [eDSRecordNotFound]: no dsRecTypeStandard:Computers record for account 'VISTA-02$'
[2009/04/22 13:25:26, 1, pid=42167] /SourceCache/samba/samba-187.8/samba/source/passdb/pdbinterface.c:pdb_default_createuser(371)
pdbdefault_createuser: failed to add a new account for 'VISTA-02$'
[2009/04/22 13:25:30, 2, pid=42171] /SourceCache/samba/samba-187.8/samba/source/smbd/reply.c:reply_special(328)
netbios connect: name1=10.10.1.102 name2=MYMAC
[2009/04/22 13:25:30, 2, pid=42171] /SourceCache/samba/samba-187.8/samba/source/smbd/reply.c:reply_special(335)
netbios connect: local=10.10.1.102 remote=mymac, name type = 0
[2009/04/22 13:25:30, 2, pid=42171] /SourceCache/samba/samba-187.8/samba/source/lib/module.c:dosmb_loadmodule(64)
Module '/usr/lib/samba/auth/odsam.dylib' loaded
Thanks!
Message was edited by: capc

Login window hides user with UID 1000

I had to change my primary user's UniqueID to 1000 to access NFS shares on a linux box.
Ever since then the account became "hidden" in the sense that regardless of the login window's option of "show list of users" I can only log in by selecting the "Other" option and supplying the username+password.
I have researched extensively and some people over different forums reported this behaviour as well specific to UID 1000. Nevertheless this "feature" is absolutely undocumented.
Would anyone know of a plist option that puts this user back to the login screen list?
I suppose alternatively I could change the UID back to 501 on both the Mac and the linux box so they'd be in sync...

Thanks for the responce.
I realize that I need to chown some user specific folderes and files. I also did that on my current system.
Nevertheless...some thinges are still not working properly. I belive im not quite there yet.
I would like to know how to do this the simple but correct way....in LION
I think its a bit overkill to use your scripts, due to all the LDAP stuff.
There must be a specific way to add users with specific UID on LION on a single OSX installation.
I have found lots of halv way there solutions on the net..but would realy like to see something more official!
I kind of made a workaround with my NFS share on my linux sever, using a special way to mount them avoiding hte UID problems.
On the linux box in etc/exports...i export the NFS share linke this.
/media/RAID5/xxxx *(rw,async,no_subtree_check,insecure,anonuid=1000,anongid=1000,all_squash)
And ...in Finder...on the mac ...i right click and "Connect to server" like this
nfs://xxxIPxxxxx/media/RAID5/xxxx
xxxx= some folder do share.
All my linux users are as standard UID 1000, but if anyone with a drifferent UID mounts the nfs share ...they are regarded as uid 1000 in any case avoidnig file premission conflicts.
NFS is not the only reason I would like to use same UID on all systems.
Sharing files on harddisks, and dualboot systems with linux/osx are another reason.
Linux has read/write to HFS+ if not journaled..!!
(I know this is more info than needed, but if someone else reads this...having NFS issues..thay may pick up some idears ;o)

TS1368 I'm a PC user with an itunes account for several years. I updated my itunes and now it wont open and shows me 'missing file MSVCR80.dll,and error 7(Window error 126)' keep coming up even after re-installing itunes . What should i do?

I'm a PC user with an itunes account for several years. I updated my itunes and now it wont open and shows me 'missing file MSVCR80.dll,and error 7(Window error 126)' keep coming up even after re-installing itunes . What should i do?

Click here and follow the instructions.
(98897)

Connect to a cube with Integrated WIndows Sercurity for Windows user with computer outside the domain

Hello,I am trying to connect to an MSSAS cube with a windows user ( and i need this user to be the end user that connect to the cube) from outside the domain.It will be .Net application.I use msmdpump.dll before but the thing is it impersonate the connection
so the user that connect to the Cube is not the real client user with is a problem for me because i like to manage the security throw roles.
SSRS is able to do what i am trying to achieve ( it ask you your domain user and password) then connect to the cube with these credential which is great,but i do that ?
With ADOMD.Net how do you provide windows user/password in the connection string ?
I tryed to only active windows security access with IIS and MSSAS but it's not working with a computer outside the domain even if in excel i provide a windows user/password.
Vincent

With ADOMD.Net how do you provide windows user/password in the connection string ?
Hello Vincent,
See MSDN Connection String Properties (Analysis Services) for all available properties; addtitional: AdomdConnection.ConnectionString
Property =>
Olaf Helper
[ Blog] [ Xing] [ MVP]

I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit. Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help. Currently I am running Version 3.0.4 (322).

I need to know which update(s) I can apply to help stabalize the system.

Typing the body of the thread message in the title, huh? -)
I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit. Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help. Currently I am running Version 3.0.4 (322).
Only Apple could hamstring and tie Mac OS to Windows. There isn't any other than whether you can download the drivers into Windows (you can) but Apple puts a block on the installer setup even if your mac does not support it.
Windows 7 needs at least Boot Camp 3.1 and 3.3 is what you should already have. And you are not getting security updates if you don't have at least 10.6.8 as was pointed out. --- you arent using Software Update as you should. And you should backup and clone Mac (and Windows) as well.
You need Mountain Lion to use Boot Camp 5.x which supports Windows 7 & 8 and 64-bit.
I would upgrade to Lion if you can realizing that Rosetta and PowerPC are no longer supported though.
Mac 101: Using Windows on your Mac via Boot Camp
https://support.apple.com/kb/HT1461
http://www.apple.com/support/bootcamp/
Helpful Apple Support Resources (Forum Overview)
Boot Camp Support
Boot Camp Manuals
Boot Camp 5.0 Drivers
http://support.apple.com/kb/DL1638
Frequently asked question
http://support.apple.com/kb/HT4818
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdfcreate a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
https://support.apple.com/kb/HT4569
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf
Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
http://www.apple.com/support/bootcamp/
Is there a download of the Boot Camp 5 Support Software if I'm not using OS X Mountain Lion v10.8.3?
Yes, you can download the Boot Camp 5 Support Software here.
http://support.apple.com/kb/DL1638
How do I use the Boot Camp 5 Support Software I downloaded from the web page?
The download file is a .zip file. Double click it to uncompress it.
Double-click the Boot Camp disk image.
Copy the Boot Camp and "$WinPEDriver$" folders to the root level of a USB flash drive or hard drive that is formatted with the FAT file system (see question below for steps on how to format).
Install Windows, leaving the flash or hard drive attached to the USB port of your Mac.
Installation of the drivers can take a few minutes. Don't interrupt the installation process. A completion dialog box will appear when everything is installed. Click Finish when the dialog appears.
When your system restarts your Windows 8 installation is done.
Note: If the flash drive or hard drive was not attached when you installed Windows and was inserted after restarting into Windows 8, double-click the Boot Camp folder, then locate and double click the "setup.exe" file to start the installation of the Boot Camp 5 Support Software.
How do I format USB media to the FAT file system?
Use Disk Utility to format a disk to use with a Windows computer. Here's how:
Important: Formatting a disk erases all the files on it. Copy any files you want to save to another disk before formatting the disk.
Open Disk Utility.
Select the disk you want to format for use with Windows computers.
Click Erase, and choose one of the following from the Format pop-up menu:
If the size of the disk is 32 GB or less, choose MS-DOS (FAT).
If the size of the disk is over 32 GB, choose ExFAT.
Type a name for the disk. The maximum length is 11 characters.
Click the Erase button and then click Erase again.
Which versions of Windows are supported with Boot Camp 5?
64-bit versions of Windows 8 and Windows 7 are supported using the Boot Camp 5 Support Software. If you need to use a 32-bit version, you need to use Boot Camp 4 Support Software, and you must use Windows 7. 32-bit versions of Windows 8 are not supported via Boot Camp. For a complete list of Windows OS support, click here.

How to restrict users working on Windows 7 clients from accessing Windows Explorer and other systems in the network through Group Policy with a domain controller running on Windows Server 2008 r2

Dear All,
We are having an infrastructure setup of around 500 client computers managed through group policy.
Recently the domain controllers have been migrated from Windows Server 2003 to Server 2008 R2.
Since this account requires extremely strict environment, we need to figure the solution for restricting the users from access anything locally.
It would be great if you can assist me with the following query.
How to restrict users logged on Windows 7 clients from accessing Windows Explorer and browsing other systems in the network through Group Policy with a domain controller running on Windows Server 2008 r2 ?
Can we disable Network Tab on the left hand pane ?
explorer.exe is blocked already, but users are able to enter the Windows Explorer by clicking on the name which is visible on the Start Menu.

>   * explorer.exe is blocked already, but users are able to enter the
>    Windows Explorer by clicking on the name which is visible on the
>    Start Menu.
You cannot block explorer.exe when you do not replace the shell - the
desktop you see effectively IS explorer.exe...
Your requirement sounds like you need a custom shell:
http://gpsearch.azurewebsites.net/#2812
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Users with IE 9 64 bit on windows 7 machine

Similar Messages

Maybe you are looking for