Using 11.1.1.4 - dateTime

using 11.1.1.4
have used function xp20:current-dateTime() to insert DateTime in oracle database column.
BPEL is success. But when I go see in database column, date is stored as 29-NOV-11 So question is where is the Time part ? why it stored only date and no time part ?
thx

This is because the date format of your database is set as "DD-MON-YY". you can either use to_date() function to retreive the time information or set the nls_date_format of your database to show up the time values.
Thanks,
Vikas Manchanda

Similar Messages

  • Error when using cast and convert to datetime

    I run a stored procedure
    usp_ABC
    as
    begin
    delete from #temp1 
    where #temp1.ResID not in 
    ( select Col1 
    from TableA 
    where ( @I_vId = -1 or Doc_Field_ID = @I_vId)
    and ColA1 = 2  and FieldValue !=''
    and cast ( FieldValue as DATETIME ) = cast (@strvalue_index as DATETIME)
    and ResID = #temp1.ResID
    and TypesId = @I_vTypeId
    end
    But return message "Conversion failed when converting date and/or time from character string.'
    Format of Column FieldValue is nvarchar(400)
    @strvalue_index = '05/05/2013'
    So I see in article http://technet.microsoft.com/en-us/library/ms174450.aspx MS say about MS SQL Server and SQL Server Compact.
    Then I re-write proc:
    delete from #temp1 
    where #temp1.ResID not in 
    ( select Col1 
    from TableA 
    where ( @I_vId = -1 or Doc_Field_ID = @I_vId)
    and ColA1 = 2  and FieldValue !=''
    and cast ( cast(FieldValue as nvarchar(200)) as DATETIME ) = cast (@strvalue_index as DATETIME)
    and ResID = #temp1.ResID
    and TypesId = @I_vTypeId
    so stored run success.
    I don't understand how?
    When i run only statement in MS SQL Studio Management, the statement run success.
    Thanks all,

    No bad dates in my data.
    Apparently you have. Or, as Johnny Bell pointed out, there is a clash with date formats. Did you try the query with isdate()?
    For SQL 2008, you need
      CASE WHEN isdate(FieldValue) = 1
           THEN CAST (FieldValue AS datetime)
      END =
      CASE WHEN isdate(@strvalue_index) = 1
           THEN CAST (@strvalue_index AS datetime)
      END
    Erland Sommarskog, SQL Server MVP, [email protected]
    I think date formats is OK. So when I re-write stored:
    and cast ( FieldValue as DATETIME ) = cast (@strvalue_index as DATETIME)
    =>
    and cast ( cast(FieldValue as varchar(200)) as DATETIME ) = cast (@strvalue_index as DATETIME)
    the stored procedure will run success. I see in http://technet.microsoft.com/en-us/library/ms174450.aspx MS
    has an IMPORTANT:
     Important
    When using CAST or CONVERT for nchar, nvarchar, binary, and varbinary,
    SQL Server truncates values to maximum of 30 characters. SQL Server Compact allows 4000 for nchar and nvarchar, and 8000 for binary and varbinary. Due
    to this, results generated by querying SQL Server and SQL Server Compact are different. In cases where the size of the data types is specified such as nchar(200), nvarchar(200), binary(400), varbinary(400), the results are consistent across SQL Server and
    SQL Server Compact.
    I can't explain it in this case

  • POI HSSFWorkbook using to read data of datetime format

    Hi
    I am trying to read the drata from excel sheet which contain data as in date format.
    The data is in the datetime format but I am unable to read this data in our jsp page.
    its shows the cell type is of integer type.
    able to read simple date in format yyyy/mm/dd but getting problem in yyyy/mm/dd hh mm format.
    guide me what to to.
    Thanks
    parveen kumar

    Hi
    I am trying to read the drata from excel sheet which contain data as in date format.
    The data is in the datetime format but I am unable to read this data in our jsp page.
    its shows the cell type is of integer type.
    able to read simple date in format yyyy/mm/dd but getting problem in yyyy/mm/dd hh mm format.
    guide me what to to.
    Thanks
    parveen kumar

  • Labview Date to SQL Server DateTime Conversion

    I have inherited a database of legacy data (created by Labview software) and I need to import that data into a SQL Server 2000 database.
    One of the fields I'm importing includes a string of numbers which respresents a datetime field - in the following format:
    3172089659
    which represents the number of SECONDS since Jan 1 1904 12:00 am Universal Time
    (Was that a significate date in history ?)
    Is there a built in function within SQL that can help be convert this into a standard SQL Server DateTime format during import?
    Thank you
    Devon Kyle

    Devon,
    This can be somewhat database dependent. I don't know how the standard SQL Server handles date addition. However,most have it. One which I uses has the following:
    SECONDS( datetime-expr, integer-expr ) Add integer-expr seconds to the given date/time. If the integer-expr is negative, the appropriate number of seconds are subtracted from the date/time.
    Since you know the start date, this would easily calculate the date you are wanting.
    Hope this helps.
    Russ

  • Is it possible to compare two parameters type dateTime in switch- component

    Hello,
    i have a synchronouse prozess with one switch component. In the switch component i want to compare to parameters type dateTime. While execute the prozess alwayse the <otherwise>- sector is executed, but never the sector with the condition. But the condition is fulfilled.
    Can it be, that a comparison in a switch-component doesn't work while using two parameters with type dateTime?
    If it is so, has anybody an idea, how to compare two dateTimes without using the character dateTime?
    I'll be very happy about a helpfull advice.
    Thanks and regards,
    rala

    Hi Rala,
    this example works perfectly for me.
    IMHO doesn't matter how to assign values to dateTime variables.
    <scope name="Scope_timeDate">
    <variables>
    <variable name="aktCas" type="xsd:dateTime"/>
    <variable name="casDuration" type="xsd:dateTime"/>
    </variables>
    <sequence name="Sequence_1">
    <assign name="Assign_datesTimes">
    <copy>
    <from expression="xp20:current-dateTime()"/>
    <to variable="aktCas"/>
    </copy>
    <copy>
    <from expression='"2002-05-30T09:00:00"'/>
    <to variable="casDuration"/>
    </copy>
    <copy>
    <from expression="'before'"/>
    <to variable="rtn"/>
    </copy>
    </assign>
    <switch name="Switch_1">
    <case condition="bpws:getVariableData('aktCas') &gt; bpws:getVariableData('casDuration')">
    <assign name="Assign_ok">
    <copy>
    <from expression='"IF"'/>
    <to variable="rtn"/>
    </copy>
    </assign>
    </case>
    <otherwise>
    <assign name="Assign_otherwise">
    <copy>
    <from expression='"otherwise"'/>
    <to variable="rtn"/>
    </copy>
    </assign>
    </otherwise>
    </switch>
    </sequence>
    </scope>
    Regards,
    Ivan

  • Parse xs:dateTime String as Date

    Hi all,
    I have to parse a xs:dateTime String (such as "2005-10-27T16:18:06.421+02:00") into Date. I have tested the next piece of code:
    String timeString="2005-10-27T16:18:06.421+02:00";
    DateFormat dateFormat = new SimpleDateFormat("'-'?yyyy'-'MM'-'dd'T'HH':'mm':'ss('.'S+)?(zzzzzz)?");
    Date date = dateFormat.parse(timeString);but it throws the following exception:
    java.text.ParseException: Unparseable date: "2005-10-27T16:18:
    06.421+02:00"
    at java.text.DateFormat.parse(Unknown Source)
    Could anybody be so kind as to tell me how getting a Date from a dateTime string, please?
    Thank you very much in advance.

    First of all, thank you very much for your request.
    It has been very useful.
    When getting a dateTime using:
    String
    timeString="2005-10-27T16:18:06.421+02:00";
    DateFormat dateFormat = new
    SimpleDateFormat("yyyy-MM-dd'T'HH:mm:ss.SSSZ");I obtain the following, as you have written:
    "2005-10-27T16:18:06.421+0200"
    However, this is not compliant with dateTime defined
    in XMLSchema (http://www.w3.org/TR/xmlschema-2/),
    because the time zone does not contain ":". Is there
    any way of getting a date-time compliant with
    xs:dateTime? if not, should java consider it?
    Thank you very much in advance.I do not know much about XMLSchema but I will take your word for the date/time definition - as far as I can see there is no time zone in SimpleDateFormat that complies with this format exactly.
    You could create the string by adding the ':' or parse it by removing the ':' as in my example; but, I do not see a way to do this directly.
    You might want to search to see if there is a bug report out there or maybe some other discussion on this topic.

  • Xp20:format-datetime usage....

    Hello gurus,
    I am trying to use the xPath function format-datetime to get rid of the timezone from an input element, but in the output factional seconds is returning all zeroes. My picture string looks like below.
    xp20:format-dateTime($CreationDateTime,"[Y0001]-[M01]-[D01]T[H01]:[m01]:[s01].[f000001]")
    eg: Input: 2011-01-07T09:35:03.624992-05:00
    Output: 2011-01-07T09:35:03.000000
    I am using 10.1.3.4 SOA and jdeveloper version.
    Any help is highly appreciated.
    Thanks in advance.
    Fub

    How do I set this though to format the date itself? i.e. I have set this up so far, xpath20:format-dateTime(xpath20:current-dateTime()), but what do I place in the last set of parenthesis that allows me to achieve this?

  • Xp20:format-dateTime with milli seconds always as zeroes

    Hi All,
    I am trying to use the xPath function format-datetime , but in the output factional seconds is returning all zeroes. My picture string looks like below.
    *xp20:format-dateTime(xp20:current-dateTime(),"[H01][m01][s01][f001]*
    Result always in zeroes see example below:
    *105017000*
    Do somebody have some advice on this issue?

    Use ora:getCurrentDateTime() extension function instead... It accepts java SimpleDateFormat patterns and it is able to go milliseconds...
    Cheers,
    Vlad

  • Select *from - special character in datetime 'slash'

    I have table with DateTime colun :
    id dateTime
    1 12/08/03 11:23:25,563563456345634563456
    2 12/08/03 11:23:25,34333333
    I select the rows that were created today , for example 2012-08-03
    but when use :
    select * from TEST_TABLE where DATETIME like '12/08/03'
    i dont have any rows - I need replace '/' - slash
    how to do it ?
    Edited by: user8855885 on 2012-08-03 03:19
    Edited by: user8855885 on 2012-08-03 03:20

    Hi User,
    Welcome to Forum !!!!!!!!
    Why you are saving date in character format recommended, not to save date in character formats.
    Here it is,
    SELECT TO_DATE ('12/08/03 11:23:25', 'YY/MM/DD HH24:MI:SS'),
           TRUNC (TO_DATE ('12/08/03 11:23:25', 'YY/MM/DD HH24:MI:SS'))
      FROM DUAL;
      And,
    Query:
    SELECT *
      FROM your_table
    WHERE TRUNC (datetime) = TRUNC (SYSDATE);Here TRUNC(SYDATE) give today's date. TRUNC function removes the time. So you can get the records created today.
    Thanks,
    Shankar

  • JPA - How can I use the table's default Date types? e.g. CURRENT_TIME

    Once again, can't find an answer anwhere.
    I would like to know if/how one can use the default date/time/datetime types as declared for the target table when attempting to persist an entity having these fields set as null.
    create table item
         item_id INTEGER NOT NULL PRIMARY KEY DEFAULT AUTOINCREMENT,
         date_created DATETIME NOT NULL DEFAULT NOW(*),
         date_updated DATETIME NOT NULL DEFAULT NOW(*),
    );Now how can I get the above table to work when attempting to em.persist(myItem) whereby dateCreated and dateUpdated are both null?

    I should also mention that TopLink has always supported the ability to retrieve the current time from the database for use in optimistic locking. The TimestampLockingPolicy offers the ability to configure the next value being retrieved from the database instead of using the local time from the JVM. Our extended optimistic locking configuration does not currently support setting this option but it could be done using a descriptor customizer which can be configured in your persistence unit properties.
    Using optimistic locking may be a good solution for the last modified date since it will also ensure that you do not corrupt the database if someone else has incremented this value since your last read.
    Doug

  • Pass a variable value to SQL Command in OLEDB Source

    Hi,
      I have the OLEdb Source where it has SQL Command as Data Access Mode. Below is the sample query that i have in that.
    DECLARE @MonthOffSet int = 24
    DECLARE @PaidDate_SK_Low datetime = dateadd(mm,MONTH(getdate())-@MonthOffSet-1,dateadd(year,datediff(year,0,dateadd(YY,0,getdate())),0))
    DECLARE @PaidDate_SK_High datetime = dateadd(dd,-1,dateadd(MM,@MonthOffSet,@PaidDate_SK_Low))
    followed by select statement which has where clause.
     Instead of hard code the value 24, i am trying to get the value from variable. I know there is a limitation to add the parameters only in where clause. Is there any work around or solution.

    But i need to use the first four lines of code in lot other packages which has different sql statement. But if i make whole query variable then i have a limitation on length 4000 char.
    DECLARE @MonthOffSet int = 24
    DECLARE @PaidDate_SK_Low
    datetime = dateadd(mm,MONTH(getdate())-@MonthOffSet-1,dateadd(year,datediff(year,0,dateadd(YY,0,getdate())),0))
    DECLARE @PaidDate_SK_High
    datetime = dateadd(dd,-1,dateadd(MM,@MonthOffSet,@PaidDate_SK_Low))
    in my select statement in where clause i am using date range between @PaidDate_SK_Low
    datetime  and @PaidDate_SK_High
    datetime 
    Any suggestions

  • Get file name and received date & time

    Hello experts,
    We are loading around 10 source files(xml) on regular basis to Target table. I have to capture source filename & received datetime of those files and status of file whether it loaded successfully or not(I can care take care of status of file).  I want to automate this process using BODS and load filename, datetime and status data into one database table.
    For you information: File name looks like QAS_Wareneingang_20140328-190006-438.     ( from file name  ..190006-438 number is random number they are generating) and Date and time is constant for that day eg: 28.03.2014  19:00
    Could you please help me...
    Thanks & regards
    Mohan

    Thank you Arun for your kind help...
    I found a solution to find and move all related filenames with timestamp to  file_names.txt file using the batch script below.
    @echo on
    cd /D G:\BAUR
    dir /n Auslagerung* > G:\Dev_Users\BAUR\file_names.txt
    exit
    After that I used the above file as source and formatted using query transform in BODS.

  • How to Append date time to the Source File Name in send Port without Orchestration

    Hi,
    I am using the Macro %SourceFileName%_%datetime%.zip in the filename(Send Port).
    say my file name is ABC.zip
    But I am getting the output as ABC.zip_2013T083444
    Please suggest, How to avoid the extension?
    Vignesh S ----------------------------------------------------------- Please use Mark as Answer if my post has solved your problem and use Vote As Helpful if my post was useful.

    The problem here is %SourceFileName% context property would return filename “With” extension. So when you use %SourceFileName%_%datetime%.zip you get FileNameWithExtension_Datetime
    For this you have to handle it either in customer pipeline component or in orceshtration where you have to remove the extension from the Filename.
    Read this post on remove the extension from this file name
    msgOut(FILE.ReceivedFileName) = System.IO.Path.GetFileNameWithoutExtension(msgIn(FILE.ReceivedFileName));
    After this if you use the
    %SourceFileName%_%datetime%.zip macro, you would get the desired output.
    If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful.

  • QUERY WHICH COUNTS NUMBER OF TIMES WORDS/LETTER APPEAR IN SENTENCE - Thanks

    I have this query below
    it gives the number of times a txn is hign comfort and Approved
    .. nyumber of times txn is meduim comfort and approved etc.
    There is a futher line whihc shows the number of times txn is blacklisted BL COUNT.
    I am trying to get line of query which can show me the number of times txn is approved, is high comfort and blcklisted ( the same applies for
    wl - watch listed)
    The query i am using
    SUM
    (CASE
    WHEN cc.Comment
    LIKE ('BL(%') and cc.Comment
    LIKE ('Approved%')
    AND cc.Comment
    LIKE ('%ComfortLevel=High Comfort%')
     THEN 1
    ELSE 0 END)AS hbcl  - NO RESULTS BEING GIVEN
    pLEASE CAN ANYONE HELP,. THANKS
    QUERY
    USE RiskManagementReporting
    GO
    DECLARE
    @StartDate DATETIME,
    @EndDate DATETIME
    SET @StartDate
    = '2014-01-01 00:00:00'
    SET @EndDate
    = '2014-03-31 23:59:59'
    SELECT
    CONVERT
    (VARCHAR(10),
    mt.OPacket_TransactionTime, 102)
    AS [Date],
    SUM
    (CASE
    WHEN cc.Comment
    LIKE ('Approved%')
    AND cc.Comment
    LIKE ('%ComfortLevel=High Comfort%')
    THEN 1 ELSE 0
    END) AS [A - HighC],
    SUM
    (CASE
    WHEN cc.Comment
    LIKE ('Approved%')
    AND cc.Comment
    LIKE ('%ComfortLevel=Medium Comfort%')
    THEN 1 ELSE 0
    END) AS [A - MediumC],
    SUM
    (CASE
    WHEN cc.Comment
    LIKE ('Approved%')
    AND cc.Comment
    LIKE ('%ComfortLevel=Low Comfort%')
    THEN 1 ELSE 0
    END) AS [A - LowC],
    SUM
    (CASE
    WHEN cc.Comment
    LIKE ('Declined%')
    AND cc.Comment
    LIKE ('%ComfortLevel=Low Risk%')
    THEN 1 ELSE 0
    END) AS [D - LowR],
    SUM
    (CASE
    WHEN cc.Comment
    LIKE ('Declined%')
    AND cc.Comment
    LIKE ('%ComfortLevel=Medium Risk%')
    THEN 1 ELSE 0
    END) AS [D - MediumR],
    SUM
    (CASE
    WHEN cc.Comment
    LIKE ('Declined%')
    AND cc.Comment
    LIKE ('%ComfortLevel=High Risk%')
    THEN 1 ELSE 0
    END) AS [D - HighR],
    SUM
    (CASE
    WHEN cc.Comment
    LIKE ('BL(%')
    THEN 1 ELSE 0
    END) AS [BL Count],
    SUM
    (CASE
    WHEN cc.Comment
    LIKE ('WL(%')
    THEN 1 ELSE 0
    END) AS [WL Count],
    SUM
    (CASE
    WHEN cc.Comment
    LIKE ('Marked as Touched%')
    THEN 1 ELSE 0
    END) AS [Touched by DRT],
    COUNT
    (mt.csnTransactionId)
    AS [Sent to DRT]
    FROM MatchedTransaction mt
    WITH (NOLOCK)
    LEFT
    JOIN CustomerComment cc
    WITH (NOLOCK)
    ON (mt.csnTransactionId
    = cc.SenderMTCN
    AND cc.InsertDate
    BETWEEN @StartDate AND
    DATEADD (D, 1, @EndDate)

    I have adjusted this as  
    SUM
    (CASE
    WHEN cc.Comment
    LIKE ('Approved%')
    AND cc.Comment
    LIKE ('%ComfortLevel=High Comfort%')
    AND cc.Comment
    LIKE ('%BL(%')THEN 1
    ELSE 0 END)
    AS hcbl,
    Still no result

  • How to compare to date and From date in XSLT

    Hi,
    I have to check in my process "*To date*" and "*From date*" and make "*To date*" greater than or equlas to "*From date*"..
    Is there any function which performs this task.
    I will appreciate if someone can provide any Solution on the same..
    Thanks in advance..

    Hi,
    You can compare dates in XSLT as in BPEL and in XPath using &lt; and > and =, you can even add a duration in days or months to your date using xp20:add-dayTimeDuration-to-dateTime()
    The only but is all the dates have to be in ISO 8601 Format...
    http://www.w3.org/TR/NOTE-datetime
    For example:
    *1994-11-05T08:15:30-05:00* corresponds to November 5, 1994, 8:15:30 am, US Eastern Standard Time.
    *1994-11-05T13:15:30Z* corresponds to the same instant.
    The following will return true if $dateFrom is less than $dateTo...
    <xsl:value-of select="$dateFrom &lt; $dateTo"/>Cheers,
    Vlad

Maybe you are looking for

  • Error while invoking decision service

    Hi, I have created a decide activity to invoke decision service partner link, then I have created copy operation assignments between fact types in my business rule set and BPEL variables. Now while running the BPEL process, I am getting the following

  • Simple Java Coding Question

    I know this is a simple question, but I can't search for the answer to this because it involves syntax that Google and the like don't seem to search for.. I am trying to figure out some Java code that I have found. I would like to know what: a[--i] a

  • Migo is not showing the excise tab - header level and item level

    Hi, i have created one PO with excise and i have created MIGO with only capture excise invoice, in MIGO before saving the document system is showing the excise basic, cess and higher education cess in excise tab, header level as well as item level. A

  • My iPhone 4S only plays default alert

    When I first got the 4S I made a custom laert for a tweet and it played just fine.  Then I got another twitter client and got rid of the default one.  I realized it wouldn't play after that, so I got the default one back (the other one wasn't very go

  • Cant access quicktime control panel

    I may be stupid or somethin, but I can't find the **** quicktime control panel to upgrade to the pro version. I looked through my computer's control panel, there is only one user on it, but it looks like there is also an old administrator user there