Using a Mac Pro, how do I play only one playlist and use shuffle?

How do I play a specific playlist in itunes and use shuffle?

Go to the playlist. You'll see the intersected lines (shown below). Click on that and press play.

Similar Messages

IPhone plays only one playlist and won't others

Hi guys,
can anyone help me; I have my iPhone for so long time, always updated with latest version of software, but recently after latest update 3.1.3. iPod plays only one playlist and won't play any other. Also can't enter any other artist file or videos. When I try to, Ipod closes! The rest of phone works fine.
Could it be problem with latest update? How can I reset latest update?
Thanks!

The latest update works fine for most people, but your's might not have been applied correctly for some reason.
Try the standard troubleshooting steps in order:
Restart your phone: Press and hold the Sleep/Wake button for a few seconds until a red slider appears, and then drag the slider. Then press and hold the Sleep/Wake button until the Apple logo appears.
Reset your phone: Press and hold both the Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears.
Restore your phone: Restore: http://support.apple.com/kb/HT1414
Make an appointment to have an Apple Retail Store Genius look at your phone. http://www.apple.com/retail/geniusbar/
If you're in the US, call U.S. iPhone technical support: 1-800-MY-IPHONE (1-800-694-7466)
If somewhere else, find the contact number here: http://www.apple.com/support/contact/phone_contacts.html

Easy Question! How Do I Play ONLY the Selection, and then playback stops?

How Do I Play ONLY the Selection, and then playback stops? (Same as subject..)
Thanks! I'm loving STP so far. I came from Sony Sound Forge so it's been difficult finding something that can compare, but I think I have it now! Lot's of advantages for STP too.

I think you're confusing the audio loops with MIDI loops. The blue loops are audio loops which will play only on audio tracks. You can't 'play' those with a keyboard because they are actual audio files. The green loops contain MIDI data that corresponds with a software instrument, and if you drop them onto a Software Instrument track, they will open that instrument which you CAN play with an external keyboard or the caps lock keyboard.
I might be missing some loops, but when I searched for Bell Tower I found only one, and it is a blue loop. So it can only be played as an audio loop on an audio track. However, if it were a green loop, you would NOT drop it on an external MIDI track (I think that's what you're trying to do if you're dragging it onto the 'Grand Piano MIDI instrument'), but you would create a SOFTWARE INSTRUMENT track, and drag it on that. Any internal sounds you want to play from Logic's instrument you'll do from Software Instrument tracks, and not MIDI tracks.
What you should do to find a good chime sound that you can play with the caps lock keyboard is to create a Software Instrument Track, open the Library tab, and search there for a good chime. This will search all of the instruments and presets that Logic has for all of its internal instruments. Try 'Tubular Bells' and see if that works for you.
If you need to use the bells from that loop, do what SC suggested, and take the hits from the audio file and load them into a sampler. Then you can play them the way you want to. If you don't know how to make a sampler, it's a bit complicated. Look up EXS24 in the manual, or check out
http://www.youtube.com/user/SFLogicNinja
I think he has a video or two on EXS24

Ever since I updated the operating system, itune doesn't play music on iphone 4. if it plays, it plays only one song and gets stuck.

Ever since I updated the operating system, itune doesn't play music on iphone 4. If it plays, it plays only one song and gets stuck. I've tried to reconnect to the computer to see whethere there has been missing portion during the upgrade... but not really. does anyone have the same issue?

What does "gets stuck" mean?
It repeats?
It stops playing?
Have you tried the basics from the manual? Restart. Reset. Restore.

Can iTunes be set to play only one song and then stop when the song is finished and not go on to play another unless commanded?

Can iTunes be set to play only one song and then stop when the song is finished and not go on to play another unless commanded?

If you uncheck all of the songs, they will only play if explicitly commanded. Command-click in a checkbox and they will all be unchecked. Command-clicking again will check the all again should you want to do that.

Playing Only One Song

How do I play only one song on my iPod, then stop without automatically going to the next song? I can't find a setting and not sure how to do it.
I play in a small band and have loaded recorded audio backing tracks into the iPod. I want to be able to play the song (i.e., backing track), then stop when it is finished without automatically going to the next song.

Thanks. I knew I could create a playlist with one song in it. However, when on stage that will take too much time between playing individual songs. Unless, I set up a single song playlist for each song, of which there are hundreds that we do.
I was hoping I could find a setting that would allow me to play a single song directly from the Library.

HI all, i'm using Mac Pro 15" Retina. My screen goes darker and after brighter after a while? How to fix it?

HI all, i'm using Mac Pro 15" Retina. My screen goes darker and after brighter after a while? How to fix it?

System Preferences > Displays.
De-select "Automatically adjust brightness"

How to restart base station from airport utility? I used to be able to do it remotely I currently use a Mac Pro 10.8.4 and have a time machine for wireless 6.3 (630.34). Sometimes I cannot connect to the internet and use network preferences to diagnose t

How to restart base station from airport utility? I used to be able to do it remotely
I currently use a Mac Pro 10.8.4 and have a time machine for wireless 6.3 (630.34). Sometimes I cannot connect to the internet and use network preferences to diagnose the issue. This results in being told to restart the wireless. The airport utility includes the drop down option of restarting but is not clickable so I can't choose it.
With my prior macbook and same time capsule, etc if i had problems connecting to the internet I would run network diagnostics to help out. This included clicking on the airport utility ---> base station --> restart. This worked most of the time.
Bottom line, is there something I am missing in not being able to restart the wi-fi remotely? ]
Thanks in advance

You are likely forgetting a step.
Open AirPort Utility
Click on the Time Capsule icon
Click Edit in the small window that appears
Now click the Base Station menu.....top of the screen....not the Base Station "tab" in the center of the screen
Click Restart

When creating a PDF from a PPT or Keynote application on a Mac using Acrobat X Pro, how do I ensure it can be opened on a PC? Do I need to save as a particular version of Acrobat?

When creating a PDF from a PPT or Keynote application on a Mac using Acrobat X Pro, how do I ensure it can be opened on a PC? Do I need to save as a particular version of Acrobat?

The system was not my own, it was on a PC belonging to the school where I teach. The error message referred to Acrobat 9.0, so I assume that the problem is to do with the version on which the file was created being more recent than that on which I attempeted to open it.

I have to use microsoft office 2007 and 2003 for windows and I'm using a macbook pro, How i can get the on mac?

I have to use microsoft office 2007 and 2003 for windows and I'm using a macbook pro, How i can get the on mac?

You can either use Office for Mac 2011 or use Boot Camp to run Windows or use a VM, such as Parallels Desktop to run Windows. Running Windows, you'd be able to use MS Office for Windows.
Clinton

I have a newer MacBook Pro with an AMD processor. It is my understanding that Parallels can only be used on Mac's with Intel Processors. Is that true and if so does anyone have recommendations about how to have a windows side to my Mac

I have a newer MacBook Pro with an AMD processor. It is my understanding that Parallels can only be used on Mac's with Intel Processors. Is that true and if so does anyone have recommendations about how to have a windows side to my Mac

Then it either is a pirate clone or you are misinformed.
Apple Computer has never used AMD processors in its products.
However, the Graphics Processing Unit (GPU) is a Radeon unit, which is an AMD subsidiary. Parallels, VMWare, VirtualBox will all work fine with the Intel Core i7 or i5 CPU that powers the Mac, and use the AMD Radeon GPU that drives the displays.

I use my own color profiles from Photoshop CS6/Mac Pro - how do I turn of Epson Artisan 837 printer color management?

I use my own color profiles from Photoshop CS6/Mac Pro - how do I turn of Epson Artisan 837 printer color management?

Choose Photoshop Manages Color in the CS6 print dialogue. At the top, click the Print Settings button and disable any color management settings for the printer.
Edit: Correction, that's CS6 in Snow Leopard. In Mountain Lion, if you check the print settings, color management for the printer should automatically be disabled when using Photoshop Manages Color.

On my Mac Pro how can I get voiceover to start reading at a specific point on a document?, on my Mac Pro how can I get voiceover to start reading at a specific point on a document?

On my Mac Pro how can I get voiceover to start reading at a specific point in a document, and then continue on to the next paragraph and so on? Thank you. Ed

Welcome to the Apple family!!!!
How can I cause the VO cursor(box) show-up/start?
Press Control-Option and F5. The F5 key is located on the top row of keys 6th key over. This is a toggling "Keyboard Shortcut" for turning VoiceOver on and off.
How can I move the VO cursor to various sentences or paragraphs of an article and have it start reading ... and perhaps even continue reading on to the next paragraph(s) ... even to the end of the article?
How to read a website with VoiceOver
Step 1: Go to the Website
A quick keyboard shortcut is Command-L. This will jump you up to the address bar. Start typing where you want to go. i.e "www.thewebsite.com"
Step 2: Working with Webpage
VoiceOver will automatically start reading the website. You can pause the speech by hitting the 'Control Button'.
If VoiceOver does not being reading the webpage, then you might have to "Interact" with it. If VoiceOver say "HTML Content" then press Control-Option-Space-Down Arrow to interact with the webpage.
Use Control-Option-Right Arrow to move throught the website. This will speak "EVERYTHING" on the page.
Most website that I've found have their articles labeled as 'Heading'. You can jump from heading to heading, by pressing Control-Option-Shift-H.
If you'd like an itemized alphabetical listing of the site, press Control-Option-I
Press Control-Option-Space on the link or article you want to view.
Step 3. Reading from Top to Bottom
Once you found and clicked on the the article/link, use the same 'Heading' command, Control-Option-Shift-H to find the title.
After finding the title, press Control-Option-A will start reading from the title on.
Note: If there are any other items (ads, pictures, etc) it will read those too.
Tip: You might be able to activate a feature called the 'Reader'. The Reader isolates the article and elimanates the ads The keyboard command is Shift-Command-R. You can also find it in the Menu Bar (Command-Option-M) under the word 'View' then 'Show Reader'.
I am using a MACPro with OSX, probably Mavericks 10.9 (where would I look to see if that is the correct information?)
You can find this information under the 'Apple menu' in the Menu Bar. To access the Menu Bar, press Control-Option-M.
Go to Apple Menu > About This Mac. This will open up another window. Use Control-Option-Right Arrow until you hear 'Version'. If you purchased it brand new from Apple within the last six month, more than likely you have Mavericks.
Recommanded Articles.
AppleVis- Commonly used Keyboard Commands
Chapter 2: Learning VoiceOver Basics
Chapter 6: Browsing the internet
Apple Accessibility Resource Page
The 'Commands Help' Voiceover Menu. Control-Option-H-H. (hit H twice) is my best friend. It's a searchable VoiceOver Menu with most of the VoiceOver command. Example: You are looking for the 'Read Current Paragraph' keyboard command. Press Control-Option-H-H and then type Paragraph. It will then bring up all the commands with the word paragraph. I believe there are three.
As from the Trackpad Commands, I've copied and pasted below from Appendix A: Commands and Gestures
VoiceOver standard gestures
If you’re using a Multi-Touch trackpad, you can use VoiceOver gestures. VoiceOver provides a set of standard gestures for navigating and interacting with items on the screen. You can’t modify this set of gestures.
NOTE:Gestures that don’t mention a specific number of fingers are single-finger gestures.
General
Enable the Trackpad Commander and VoiceOver gestures
VO-Two-finger rotate clockwise
Disable the Trackpad Commander and VoiceOver gestures
VO-Two-finger rotate counterclockwise
Turn the screen curtain on or off
Three-finger triple-tap
Mute or unmute VoiceOver
Three-finger double-tap
Navigation
Force the VoiceOver cursor into a horizontal or vertical line when you drag a finger across the trackpad
Hold down the Shift key and drag a finger horizontally or vertically
Move the VoiceOver cursor to the next item
Flick right
Move the VoiceOver cursor to the previous item
Flick left
Move content or the scroll bar (depending on the Trackpad Commander setting)
Three-finger flick in any direction
Go to the Dock
This gesture moves the VoiceOver cursor to the Dock wherever it’s positioned on the screen
Two-finger double-tap near the bottom of the trackpad
Go to the menu bar
Two-finger double-tap near the top of the trackpad
Open the Application Chooser
Two-finger double-tap on the left side of the trackpad
Open the Window Chooser
Two-finger double-tap on the right side of the trackpad
Jump to another area of the current application
Press Control while touching a finger on the trackpad
Interaction
Speak the item in the VoiceOver cursor or, if there isn’t an item, play a sound effect to indicate a blank area
Touch (includes tap or dragging)
Select an item
Double-tap anywhere on the trackpad
You can also split-tap (touch one finger and then tap with a second finger on the trackpad)
Start interacting with the item in the VoiceOver cursor
Two-finger flick right
Stop interacting with the item in the VoiceOver cursor
Two-finger flick left
Scroll one page up or down
Three-finger flick up or down
Escape (close a menu without making a selection)
Two-finger scrub back and forth
Increase or decrease the value of a slider, splitter, stepper, or other control
Flick up (increase) or flick down (decrease)
Text
Read the current page, starting at the top
Two-finger flick up
Read from the VoiceOver cursor to the end of the current page
Two-finger flick down
Pause or resume speaking
Two-finger tap
Describe what’s in the VoiceOver cursor
Three-finger tap
Change how VoiceOver reads text (by word, line, sentence, or paragraph)
Press the Command key while touching a finger on the trackpad
Rotor
Change the rotor settings
Two-finger rotate
Move to the previous item based on the rotor setting
Flick up
Move to the next item based on the rotor setting
Flick down
To customize other gestures by assigning VoiceOver commands to them, use the Trackpad Commander.
Assigning VoiceOver commands to gestures
If you need a reminder about what a gesture does, press VO-K to start keyboard help, and then use the gesture on the trackpad and listen to the description.
Learning about keys, keyboard shortcuts, and gestures
Sorry lots of information. Enjoy. You

Using a Mac Pro w / Apple Internal Hardware RAID Card?

Anyone using a Mac Pro with a Apple Hardware RAID Card 2010?
( I have a 12 Core )
Is it worth the $600-700 ?
How much faster than the software RAID 0?
I see Hamm's RAID tips chart .. but it doesn't include such options .. plus it is based on a PC system.
Any tips would be great ..
I find many areas where the application is slow / unresponsive .. and I'm not sure where the bottleneck is ... Maybe the hardware RAID will solve it?
I'm really am impressed with CS5 .. it would be even better with some adjustments .. but I am absolutely disappointed with sluggish performance on my top-of-the-line Mac Pro 12 Core.
This is not what I expected for a $8,000 machine.
Some users says that the port of CS5 for the Mac has taken a back seat to the Windows version at Adobe.
I can't imagine that Adobe would not put 100% effort into Mac products.
Go Team!!!

I have a 2009 Mac Pro 3.33GHz Quad core w/ Apple RAID card, 16GB RAM from OWC, and Apple's Radeon HD 5870 GPU.
I have RAID 0 set across 3x1TB drives internally, and the standard 640GB drive for OSX and all program files. I set all video assets, renders, previews and such on the 3TB RAID.
This seems to work wonderfully. I built this system specifically to edit a feature film shot on P2 DVCProHD, and I've been impressed with how it handles it. This was all built prior to CS5, which took me by surprise. Had I known nVidia would become such a problem for Apple, I would have built a PC, but that's another story.
I just started a new project in CS5 on the same system, this time using H.264 video from my Nikon D7000, and so far, it seems to play just as nicely, despite not having hardware acceleration via CUDA technology. Yellow bars on top, even. I haven't had any problems with clips taking a long time to populate on the timeline or any of that, so perhaps the RAID card helps there.
All this aside, I've already decided to upgrade my RAID for another reason. Right now, my backup is performed via an eSATA-connected external drive through a PCI eSATA card. After every edit session, I dump everything on the RAID onto the external drive, and it goes much faster than the old FW800 transfer used to. I'm about to replace my Apple RAID card with an Areca card and set up a 4-bay RAID 3 via an SAS connection. This will allow for excellent data throughput while offering more security than my current RAID 0 / manual backup system, and free up the internal drives for backups, exports and render files.
I believe in hardware RAID, but I'm not as knowledgeable as Harm and others are about it. I had my Mac built to order with the Apple RAID card, so I have no experience using Premiere with a software RAID. Due to my smooth experience using it, I think it was worth it, but plenty of people say the Apple RAID card is rubbish, and to go with Areca or Atto cards. I didn't know about them until after I built my system, and even though it will cost a couple thousand to upgrade my RAID from this point, I expect to have an even better system than I already have.
I hope this helps, and feel free to ask any questions I didn't address.

I am thinking of using a Mac pro for share trading. Can anyone share their experience and suggest specs for 30 -40 monitors etc

Hi
I am thinking of using a Mac Pro for share trading.
I am proposing to start small but want to be able to expand up to 30+ monitors.
It must be super quick.
Any help with hardware would be appreciated.
Software is secondary at this point , but open to advice.
I have an iphone and ipad so feel it will better intergrate usung Apple
regards
David

There is no desktop machine that I know of that will support 30+ monitors as is.
Fill the 3 or 4 PCIe slots of any logic board with three port graphics cards and you have the physical cap without additional hardware.
Software is secondary at this point
No, without software, how can you control more than the monitor limit of the OS?
How can you set up the monitors to display the various programs that you will wish to use simultaneously?
Software is a major consideration.
Matrox (and others) have solutions for additional monitors beyond the physical capabilities of generally offered graphics cards.
The caveat here, however, is support software is typically reserved for Windows and Linux systems.
Matrox has a single 8 display card:
http://www.matrox.com/graphics/en/products/graphics_cards/m_series/m9188pciex16/
Matrox has solutions specifically targeting the finance market:
http://www.matrox.com/graphics/en/solutions/trading_analyst/
Though the Mac Pro has more than adequate processing power, I think that you will find (through research) that building a solid machine capable of using several multi monitor cards is going to be what you will need to support more than 8-10 monitors with conventionally offered hardware.
Fun stuff:
http://www.digitaltigers.com/zenview.asp

Using a Mac Pro, how do I play only one playlist and use shuffle?

Similar Messages

Maybe you are looking for