Using a MacBook Pro without the Battery?

Hello!
A user in our office left their MacBook Pro (2007, OS 10.6.8) locked up in their desk during a holiday break. When they returned, the battery had swollen enough to force a corner of the access panel open. I removed the battery back and tray to inspect the insides: clean and dry. There appeared to be no leakage. We tried starting it up. The  but the screen wouldn't even flicker. It remained black. (I noticed, too late, however, that the user kept holding down the power button when they didn't get what they were expecting from the screen.) The model is a 2007 MacBook Bro with Mac OS 10.6.8
A couple questions:
1) I've never heard of a laptop battery swelling up on its own after lying dormant for two weeks. Is that possible? What are the normal indicators of a failing battery?
2) Is it possible to restart the MacBook without the battery pack and tray inside? What is the best procedure for doing or determining that?
Thanks for any help!

Brady_LS wrote:
Hello!
A user in our office left their MacBook Pro (2007, OS 10.6.8) locked up in their desk during a holiday break. When they returned, the battery had swollen enough to force a corner of the access panel open. I removed the battery back and tray to inspect the insides: clean and dry. There appeared to be no leakage. We tried starting it up. The  but the screen wouldn't even flicker. It remained black. (I noticed, too late, however, that the user kept holding down the power button when they didn't get what they were expecting from the screen.) The model is a 2007 MacBook Bro with Mac OS 10.6.8
A couple questions:
1) I've never heard of a laptop battery swelling up on its own after lying dormant for two weeks. Is that possible? What are the normal indicators of a failing battery?
Swelling is a common indicator of a failing battery.
2) Is it possible to restart the MacBook without the battery pack and tray inside? What is the best procedure for doing or determining that?
Not always, and even if you can the MBP will run at a lower speed.
Replace the battery and all other components that were removed.

Similar Messages

  • Can you use a MacBook Pro without the keyboard attached?

    Hi,
    I plan to upgrade the hard drive in my MacBook Pro (MBP) to a solid state drive (SSD). I also plan to remove the SuperDrive in the optical bay.
    I have to install a new firmware on the SSD. Installing the firmware requires the SuperDrive.
    I intend to remove the SuperDrive after installing the firmware. I'm using a Early 2008 MBP (Pre-Unibody). This MBP is a difficult to dismantle and assemble.
    Can I run the MBP (to install the firmware in FreeDOS) without reattaching the top panel (which houses the keyboard). Or can I just lay the top panel on the MBP without screwing it down. Will either of these actions damage my MBP? Once I've installed the firmware on the MBP, I'll reattach the keyboard.
    I don't want to dismantle the MBP (to insert the SSD), assemble the MBP (to install the firmware with the CD in the SuperDrive) then disassemble the MBP again (to remove the SuperDrive).
    I'd rather dismantle and assemble the MBP once.
    Lifting the top panel (which houses the keyboard)
    [IMG]http://s1.guide-images.ifixit.com/igi/AWVpQDJmt36GHxMS.large[/IMG]
    [IMG]http://s1.guide-images.ifixit.com/igi/CRBYPZtYRqpWYY4O.large[/IMG]
    Please let me know.
    Thanks!

    Sorry, Just noticed you were not using the Unibody models.
    I am unaware if the power button is dedicated. Seems like you're on the right track with iFixIt. I figure as long as USB is available, it should be okay.

  • Hi, my MacBook Air is not working anymore if it's not connected with the power cable. It's pretty new so I can't imagine that the battery is dead already. Why can't I use my MacBook Air without the power cable even though I charged it for hours?

    Hi, my MacBook Air is not working anymore if it's not connected with the power cable. It's pretty new so I can't imagine that the battery is dead already. Why can't I use my MacBook Air without the power cable even though I charged it for hours?

    Please take the Mac to  Apple store to have it checked out.
    Genius Bar reservation
    http://www.apple.com/retail/geniusbar/
    Best.

  • I have many of those lost photos on my iPod.  How can I import those to my MacBook Pro without the iTunes synchronization kicking in and removing them?

    I lost rather a lot of photos on a corrupted external storage device.  I have many of those photos on my iPod.  How can I import those
    photos into my MacBook Pro without the iTunes synchronization function kicking in and effectively deleting those photos I want to
    import from that iPod?  Any assistance would be greatly appreciated as those photos now only reside on that iPod...

    The photos you synced to your iPod through iTunes are no longer in their full resolution, but instead are scaled down thumbnails of those photos.  So if you do manage to get them off your iPod, they will be quite small in size compared to the original ones you lost.
    In order to get them off of your iPod, you'll need the help of some sort of 3rd party software. Here is one option.
    http://www.macroplant.com/podtopc/
    B-rock

  • I was on a free dictionary website and it asked me if it would like to send me push notifications and i allowed it but i don't want them anymore...how do i get rid of that? I'm using my macbook pro by the way

    I was on a free dictionary website and it asked me if it would like to send me push notifications and i allowed it but i don't want them anymore...how do i get rid of that? I'm using my macbook pro by the way

    Go to the site and look for an unsubscribe link. Or, contact the site and ask them to stop.

  • Using my MacBook Pro as the host for projection to my TV via AppleTV?

    Can I subscribe to HBOGO thru Apple TV and avoid cable service using my MacBook Pro as the host for projecting to my TV via AppleTV?S

    Possibly.
    Some sites such as TMN GO which is similar will not allow mirroring to take place.
    It works for about a minute then shuts down... Security settings from the site.

  • Frist charge : shall I use the macbook pro on the battery until the computer shut down automatically? Thanks.

    Hi. First, sorry for my English, i'm not a native speaker.
    It's the firt time i buy a macbook (pro) (and the first time i post here).
    I have recieved my macbook pro today, firt i've pluged it to the home electricity, and the i've started it. Then, when the battery charge was full, i've unplugged it. And now, my main question is : Shall i used the computer on the battery until it shut down automaticaly, or shuld i plug back the computer to electricity before it shut down?
    Thanks a lot,
    Jean-Alexandre.

    Portables with built-in batteries
    Current Apple portable computer batteries are pre-calibrated and do not require the calibration procedure outlined in this article. These computers use batteries that should be replaced only by an Apple Authorized Service Provider.
    MacBook 
    MacBook (13-inch, Late 2009) and later
    MacBook Air
    MacBook Air, all versions
    MacBook Pro
    MacBook Pro (13-inch, Mid 2009) and later
    MacBook Pro (15-inch, Mid 2009) and later
    MacBook Pro (Retina, Mid 2012)
    MacBook Pro (17-inch, Early 2009) and later
    http://support.apple.com/kb/HT1490

  • Macbook performance without the battery

    I use the macbook pro for editing video in Final cut pro, and sometimes when I am at home I remove the battery.
    and then I choose better performance, but the performance is not so good, i have constantly drop frames warning in the Final Cut.
    I've read about that a lot, and most people say that if remove the battery the macbook pro runs in half perfomance.
    And my question is,
    can I get total perfomace of the Macbook pro connected to the power without the battery, like I have when I got the battery on it???
    thanks

    > but can you explain me why??
    Not fully, some call it a bug others a feature/thermal protection.
    http://discussions.apple.com/thread.jspa?threadID=489707&tstart=0

  • Using a MacBook Pro in the Store

    I'm in the Apple Store in Walnut Creek, CA, using a MacBook Pro. They have a few on display and it's 2 hours before closing -- nobody's using them...weird.
    Anyhow, onto my impressions:
    This magnet thing is stronger than my powerbook adapter! I think if i tripped over the cord, the laptop would STILL go flying.
    Safari did not load right away...stayed blank. Reloaded Safari and it's really really fast.
    Word did not start right away, had to force quit. Now it works, don't see any differences in speed...
    Excel is so so
    iPhoto is really fast. It's way faster than my powerbook, but then again, my Powerbook iPhoto has over 10K photos/videos. This iPhoto has only 354 photos.
    iTunes -- can't really see any speed gains
    the biggest and coolest gain is the screen. sad to say to you guys out there, but with this screen and resolution, i don't see a need to get a 17".
    you can ALMOST put two full Safari screens side by side, but full screen pics in iPhoto are amazing.
    it's really bright, which i like.
    things i don't like are the magnetic adapter...man, can you say i really had to pull this thing? i'm not a weak guy either, i can bench press 200lbs and weigh about 155, not too shabby but definitely far from good.
    battery life is a no show...you know how like, when you unplug the adapter, you can see a remaining time? well, someone disabled it and i unplugged the magnetic adapter -- no battery life time, just the battery icon................c'mon guys....

    I'm heading to the Apple Store in Danbury CT tomorrow to test out a MacBook Pro. I'll happily post what I like and dislike here.
    Waiting for a MacBook Pro...   Other OS  

  • Macbook Pro detects the battery but don't use it

    So my battery is really low and I already ordered the new one but still...
    Macbook detects my battery. Coconut shows its health charge level and other stats:
    However it won't charge it neither it will use it as its power source.
    My Macbok will not even start without AC power.
    I already tried to reset everything I could (like PRAM NVRAM and SMC).
    Any suggestions?

    Yeah the battery is nearly 3.5 years old and it has warn out. Batteries only last so long then they fail. Even if it show it is charged it does hold sufficient charge to power the system.
    Replace the battery.

  • Homeshare worked on my PC until recent iTunes update. Cannot get homeshare to work on PC as previous.  When I use my MacBook Pro on the same network, iTunes/AppleTV works just fine, so it has to be iTunes?

    An interesting observation...when I have a MacBook Pro connected and select Computers on my AppleTV2, the name of the MacBook computer comes up on the screen and allows me to select it and view photos from my iTunes library. Orks perfectly. When my Windows 8 PC is connected, and I select Computers on my AppleTV, the name of the PC does NOT come up on the computer list, but instead the AppleTV immediately tries to download pictures from the PC itunes library.  It runs for ~2 minutes then generates an error message saying it could not connect to the iTunes library and to make sure it is tunrned on, connect to the same network, and use the same blah, blah, blah.  I know all the settigns on the network are correct because my MacBook works perfecty.  So frustrating that my PC worked previously before the recent iTunes software update.  What to do to fix it?

    Hi Rickgal,
    Thanks for visiting Apple Support Communities.
    Based on the information, it does sound like this behavior is isolated to your PC. I recommend trying the troubleshooting steps in this article on your PC:
    Troubleshooting Home Sharing
    http://support.apple.com/kb/TS2972
    Start with turning Home Sharing off and on again, as explained in step 3:
    Go to File > Home Sharing and choose Turn Off Home Sharing.
    Choose File > Home Sharing > Turn On Home Sharing.
    When prompted, enter the Apple ID you'd like to use.
    Click Turn On Home Sharing, then Done.
    Best Regards,
    Jeremy

  • How to downgrade from OSX 10.8.5 to Snow Leopard, on an Early 2011 MacBook Pro, without the original installer disk?

    Hello! So here are the specs.
    I have an Early 2011 MacBook Pro, which came with OSX 10.6.6 by default.
    I've lost my installer disk so I though I'd buy a retail one from the online Apple Store, and version 10.6.3 is what they sent me.
    Simply running the install OSX app won't work, I get a msg saying:
    -- You can't use this version of the application "Install Mac OS X" with this version of OS X. You have "Install Mac OS X" 23.1.1. --
    So, I've tried booting from the new disk hoping to erase my current drive and install Snow Leopard, but no can do, I get 3 beeps and have to force shutdown (not RAM related, see below). Laptop works fine when I spare it this maneuver.
    After some research I understand 2 things:
    1. Only the original installer disk will let me restore factory settings (and I don't have it).
    2. I can only install the default OSX (10.6.6) or a later version (that 10.6.3 DVD may not have the correct drivers for my system).
    Are these conclusions right? If so, would the Apple Store replace my disk for an updated 10.6.6. one? If not, then what are my options?
    Thank you!
    References:
    http://manuals.info.apple.com/MANUALS/1000/MA1172/en_US/Snow_Leopard_Installatio n_Instructions.pdf
    http://support.apple.com/kb/HT3910
    http://support.apple.com/kb/ht2186
    https://discussions.apple.com/message/19444837#19444837
    https://discussions.apple.com/message/18085179#18085179
    http://forums.macrumors.com/showthread.php?t=1163160

    Phone AppleCare and order the computer's original disks.
    (92307)

  • How do i install iphoto on my macbook pro without the application disk?

    For some reason I uninstalled the Iphone app from my macbook pro, and now I want it back but dont have the disks either. I need some help installing it back without running the application disk. Please help!!!!!!!!!!!!!!!!!!

    Call AppleCare and ask them to send you a replacement set. They will charge you a nominal fee for shipping and handling.
    Allan

  • Restore a Macbook Pro without the disc...

    Hello!
      I have had some issues with my Macbook Pro latley, so I have been trying to completly reset my Mac to the factory-preferences, without succes. The disc that I need to do this has somehow vanished and can't find it anywhere.
       So my question is if it is possible to completly reset the Mac without any these external appendage so I can have my Macbook Pro running smoothly again? I have updated to the very newest version of Mountain Lion and would like to maintain that even after the resortation.
    Thank you in advance!
    Hampus, from Sweden.

    http://www.apple.com/support/macbookpro will take you to the proper forum and you could check in on Mountain Lion.
    Yes you can.
    Depends on when and what your Mac shipped with whether it has network install.
    You can also clone or install Mac OS to external and totally nuke and do clean install from there too.

  • I lose internet on my iMac when my mate uses his macbook pro in the same room.

    My wireless internet works absolutley fine with no problems at all, no glitches until my mate turns on his macbook pro. Every couple of minutes I have to turn my wireless connection off and back on again. Sometimes this fixes the problem for another couple of minutes, sometimes I have to turn off and on the connection before I can get internet. I am connected to the network and can access my friend's shared files on his macbook but no internet. I thought bandwidth may have been the issue but it even does this while his macbook is idle with no internet activity from his macbook, he simply just has to activate the macbook from standby and that's it. I lose my internet.
    Please someone help me, as he stays connected with no problems at all.

    Try the basics first:
       Change your router channel number.  Most times this works & is all you have to do.
    Disconnect & reconnect your modem.  unplug it for about 10 seconds.  Plug it back in.  Do the same for Apple’s routers.  Wait for everything to reboot.
    System Preferences>Network
    Click the Assist Me button.
    In the next window that pops up, click the Diagnostic button & do the necessary.
    Research Knowledge Base for network problems that pertain to the OS that is currently installed on your computer.   See these basic networking KB Articles:  http://support.apple.com/kb/HT1401 AirPort troubleshooting guide
    http://support.apple.com/kb/HT4628  Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT2712 Using network locations in Mac OS X
    Manually provided DNS server addresses are higher priority than DHCP's
    http://support.apple.com/kb/HT1714 Solutions for connecting to the Internet, setting up a small network, and troubleshooting
    ============================
    What to do when you can't connect to the Internet
    Also, run the Airport Utility app which is located inside the Utilities folder.
    =====================
    If using a  Linksys router, contact LinkSys Customer Support and/or post in their forums.
    If using Apple's Airport, please re-post over in one of the AirPort Forums.

Maybe you are looking for

  • CS4 bringing photoshop layered files into illustrator - blending modes

    Hello. I have a layered photoshop file that is being brought into illustrator. One layer is a drop shadow and is set to multiply within photoshop. The drop shadow is NOT an effect. It's just a plain layer of a drop shadow. When I bring it into illust

  • Embedding html in xml tags, when rednering text as html

    Quick question, I have a site that reads all content from an external xml. The text box that reads this info renders the content as html; does anyone know how to go about putting an html tag in an xml tag so that flash can read it? So would it be pos

  • Problem with JAXP

    I have a following xml file AddressBook.xml <?xml version = �1.0�?> <addressbook> <person> <lastname>Idris</lastname> <firstname>Nazmul</firstname> <company>The Bean Factory, LLC.</company> <email>[email protected]</email> </person> </addressbook>

  • Images in Firefox Nightly doesn't finish loading.

    I have no idea why this is happening to me or how I can make it stop but... I have a really annoying problem with Firefox Nightly. Whenever there is an image, any kind of image, on a page it won't finish loading approximately 99% of the time. It goes

  • Satellite A205 - Start up and battery removal/insertion

    My Satellite A205-S4607 will be two years old in May 2009 (purchased at a retailer). Have been reasonably satisfied with the equipment, but in the last few months several times I've had start up issues. But the solution so far, luckily, turns out to