Using a midi controller with Amplitube and Logic 9

Hi all
I'm stuck as helll at the moment can someone please help???
I'm trying to use my Line 6 x3 live as a MIDI controller for amplitube (whilst this is being used as a VST plug-in) for Logic 9.
Heres my setup.
Line6 x3live connected by USB and midi IN and OUT to a Focusrite Saffire USB - connected by USB to my IMAC (27 inch standard spec) and running this on logic 9 with Amplitube as a VST.
If any one can provide a step by step guide i'd be bloody grateful.
Thanks

Unfortunately there is no way to use the remaining knobs, sliders and buttons on your Axiom. My work around was to buy the Korg NanoKontrol. It is a cheap controller with knobs, buttons, sliders and transport controls that integrates perfectly with GB. There is a little plugin on the Korg site to DL and install to use with GB so you don't need to use the garageremote with your axiom.
Cheers.

Similar Messages

  • I'm creating live video effects using a midi controller

    I am creating live video effects using a midi controller on a mcabook.The final destination for the video content is an ipad app which uses the built in iPad camera to capture video. I want to "trick" the ipad into "filming" the video from the macbook with the effects. Does anyone have any ideas - software orhardware solutions are all viable. The ipad accepts audio through an Alesis iODock. I really be looking for a software solution which will over ride the built in camera on the ipad and accept a feed from the Macbook.

    You can't override the physical camera and substitute the macbook camera.
    You could find an app or write one that would have the macbook stream the video over wifi from the macbook to the iPad.

  • Is there any iPhone midi controller that can control logic just by one usb

    is there any iPhone midi controller that can control logic just by one usb line to the mac?
    Free ones would be the best!
    Thanks!

    If you have a Mac Pro and an iPhone, surely you can afford a router? It's about the same price a a decent meal for two.

  • Is there any iPhone midi controller that can control logic just by USB?

    is there any iPhone midi controller that can control logic just by one usb insert to the mac?
    Free ones would be the best!
    Thanks!

    Although not USB, there are a couple of iPhone/Touch apps that can control the Mac using a wireless network. MobileMouse (free & paid versions) do a great job, as well as Logitech's TouchMouse. Both will allow you to use the touch screen to control the mouse, which essentially gives you the ability to do many things in Logic. I've used them, for example, to begin a recording, which frees me from being near the computer.

  • UIX/JSP - How to use the UIX Controller with UIX/JSP

    After reading the UIX Developers Guide I am under the impression that I could use the UIX Controller with UIX/JSP pages. Is this correct and are there any available examples?
    Bill G...

    It's correct, but I'm afraid we don't have much (read as "any")
    documentation on how to do that - besides reading through the
    gobs of Javadoc and guessing how to put it together.
    Half of the problem is solved by registering JspPageDescriptions
    on a PageBroker (e.g., UIXPageBroker) to tell the UIX Controller
    to use a JSP to render a particular page, instead of a UIX XML
    document.
    The other half is getting the JSP to send requests back to
    the UIX Controller. Depending on how you've chosen to name
    your pages, create either a DefaultPageEncoder or ExtensionPageEncoder
    inside your JSP, and use that to create destination URLs.

  • Can I use HP Pro 8600 with usb and wireless at the same time

    Can I use HP Pro 8600 with usb and wireless at the same time?  Sometimes I cannot get the wireless to work, it seems to be my laptop.  It would be nice if I could use the usb, but it doesn't work.  What should / can I do, if anything?
    Sam

    Hi,
    Same physical printer but when connecting to SAME computer using both USB and wireless it becomes two (logical) printers. Probably your default prnter is the wireless one, you have to select the right printer before print .
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I use a Win7 PC with iCloud and Outlook 2010 for syncing my calendar and contacts. I can enter data in my Outlook Calendar and it will appear in iCloud, but data entered in iCloud does not sync back to Outlook.  ICloud syncs to my iphone fine both ways.

    I use Win 7 PC with iCloud and Outlook 2010 for syncing my Contacts and Calendar.  They have stopped syncing...mostly.
    Now, appointments I enter on my local Outlook (iCloud) Calendar goes up to iCloud fine.  But, data I enter on iCloud directly does not come down to my local Outlook iCloud Calendar.  If I reboot the computer, the iCloud data shows up.
    Also, Contacts I try to enter on my Outlook (iCloud) Contacts goes up to iCloud fine, but does not show up in my local iCloud Contacts.
    All syncing works with my iPhone.
    I have signed out of iCloud on PC.  I have stopped syncing and re-started.  No change.
    I have an .aplzod folder for iCloud.  I have a separate Earthlink.net.pst email account in Outlook and a me.com.pst Outlook email account (which I don't actually use) listed under Data Files.
    Any help would be appreciated.  Curious that Outlook will upload to iCloud but not receive downloads unless I reboot.  However, rebooting does not download the missing Contacts.
    Jim Robbins

    Hi Jim!
    You've started off with some good troubleshooting steps, so let's see if we can take this a little further and figure out what the issue is with your iCloud contacts and calendars. I have two articles here that will help you troubleshoot this issue a little further, but the troubleshooting steps for both articles are exactly the same, so I will lay those out for you here:
    Note: When using iCloud Control Panel 2.0 and later, iCloud Calendar event descriptions in Outlook 2010 do not support text formatting (bold, italics, or underline), HTML, images, or attachments. The contextual (right-click) menu has also been disabled.
    If you are having trouble with a PC (with Outlook 2007 or 2010) and iCloud Calendar, try each of these steps, testing after each to see if the issue is resolved:
    Verify that you are using a Windows configuration that is supported by iCloud. For more information, see iCloud system requirements.
    When enabling Calendars in the iCloud Control Panel, part of the setup process is to copy your Calendars data from the default Outlook ".pst" file to iCloud, and then remove the Calendars from the ".pst" file by placing them in the Deleted Items folder in Outlook. The Calendars data is then stored in the iCloud data set within Outlook so that changes can be pushed to and from Outlook by iCloud. Be sure you are looking for your data within the iCloud dataset within Outlook after enabling Calendars in the iCloud Control Panel. The deleted files can be seen by viewing Deleted Items within your Outlook Folder List. This is not iCloud removing your data; iCloud simply copies your data into the iCloud data set and then removes the local Calendars data by placing it in the Deleted Items folder.
    Make sure your computer is online. Attempt to view www.apple.com and iCloud.com. If you can't connect to the Internet, your iCloud calendars and events will not update in Outlook. Click here for more information about troubleshooting your Internet connection.
    Open a secure website to test if you are online as is necessary for iCloud Calendar. This also tests if the ports 80 and 443 are accessible. Outlook requires port 443 access to iCloud in order to push and pull updates to and from the iCloud Calendar servers.
    Verify that your iCloud member name is entered into the iCloud Control Panel pane. See iCloud Setup for more information about setting up iCloud on Windows.
    Completely close and reopen the iCloud Control Panel.
    If you recently made changes in Outlook and they are not moving to your other devices or vice-versa, click the Refresh button in Outlook.
    Turn iCloud Calendar off and back on:
    Close Outlook.
    Open the Windows Control Panel:
    In Windows 8, move the pointer to the upper-right corner of the screen to show the Charms bar, click the Search charm, and then click the iCloud Control Panel on the left.
    In Windows 7 and Vista, choose Start menu > All Programs > iCloud > iCloud.
    Remove the checkmark in the checkbox next to Mail, Contacts, Calendars & Tasks, and click Apply. Wait a few seconds, then replace the checkmark, and click Apply.
    Open Outlook and test to see if the issue has been resolved.
    Ensure the iCloud Outlook Add-in is active within Outlook.
    Outlook 2010:
    Open Outlook 2010.
    Click the File menu.
    Click Options in the left panel of the Outlook window.
    Click Add-Ins in the left panel of the Outlook Options window.
    Look at the list of add-ins beneath "Active Application Add-Ins" and verify that the "iCloud Outlook Add-in" is listed.
    For Outlook 2007, follow these steps to verify the iCloud Outlook Add-in is active
    Open Outlook 2007.
    From the Tools menu, choose Trust Center.
    Select Add-ins from the left column.
    Look at the list of add-ins beneath "Active Application Add-Ins" and verify that the "iCloud Outlook Add-in" is listed.
    For additional information about managing Add-ins with Microsoft Outlook, see this Microsoft support document.
    Restart your computer. This may sound simple, but it does reinitialize your network and application settings and can frequently resolve issues.
    iCloud: Troubleshooting iCloud Contacts
    http://support.apple.com/kb/ts3998
    iCloud: Troubleshooting iCloud Calendar
    http://support.apple.com/kb/ts3999
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • It´s possible to use the "Remote" app with Itunes and a Nokia E72 with Joikuspot installed only? Or I´ll need to buy a modem Wifi?

    It´s possible to use the "Remote" app with Itunes and a Nokia E72 with Joikuspot installed only? Or I´ll need to buy a modem Wifi?
    I was using "remote" with a D-link modem, that works fine at my iPad. But now I´m using only the cell phone as modem 3G, and don´t want to intall a router to put new cables at my notebook.

    What?
    You want to control iTunes on your computer using the Remote app on your iPad?
    And you want to connect the iPad and computer through your Nokia?
    No, this will not work.
    Just create a network with your notebook.

  • How come I can't put music on my ipod? I already have a fair amount of music on my ipod but I have enough space for more. I am using a new computer with itunes and it is telling me if I wasnt to put the new music on my ipd i need to erase my ipod HELP!

    How come I can't put music on my ipod? I already have a fair amount of music on my ipod but I have enough space for more. I am using a new computer with itunes and it is telling me if I wasnt to put the new music on my ipd i need to erase my ipod HELP!

    Because you can only synce with one iTunes library and you are switching libries by using the new computer. To nake this yyour syncing computer:
    - Move all the media(apps, music, synced video and photos etc) to the new computer.
    - Connect the iPofd yo the computer and bake a backup fo the iPod by right clicking on the iPod under Devices in iTunes and select Back Up
    - Restore the iPod from that backup.
    Note that the backup that iTunes makes doe not include media.
    To move mdia to the new computer see:
    iTunes: How to move your music to a new computer
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer

  • Is it possible to edit parameters of an object in the environment using a midi controller?

    Is it possible to edit parameters of an object in the environment (such as the key parameter of a chord memorizer) using a midi controller?

    Anyone know what I can do? Maybe even some kind of setup in the environment that will do this?
    Thanks

  • Cannot convert webpages to pdf using Acrobat X Pro with IE9 and Windows 7, worked fine until a few m

    Cannot convert webpages to pdf using Acrobat X Pro with IE9 and Windows 7, worked fine until a few months and updates ago

    I tried your suggestion, not knowing that the direct pdf printer would also "save as" PDF, but when I try your suggestion and use the Adobe PDF printer that is a direct creation of the PDF from the browser (IE9), instead of the "black out" areas I get when I use the "Convert to" button, I get missing blocks of the resulting PDF, and only get the first 1/4 to 1/3 of the webpage.
    Just to clarify, when I said I print the webpage and then scan, that is a work around I have to do if I need a scanned version of the way a webpage appears on a particular date and time, instead of the one step process I used to be able to do when Adobe Acrobat would actually convert the webpage to a pdf without blackout areas or, if I try your suggestion, blank spots with a partial webpage. But the idea was one I had not thought of and I appreciated the thought.
    Yes, Acrobat was updated, and is updated, and was working fine until a few months ago, Win 7 and Office 32 bit versions, Office 2010

  • Help needed using multiple midi controllers with logic as rewire master

    Hi all, i've been using logic 8 for a while now and have finally settled down after learning lots of digital production theory, to sorting my studio setup and start producing for real.
    My setup includes 1 24" iMac 2.56ghz with profire610 interface, 1 behringer bcf2000, 1 mpk61, 1 apc40 and I'm using logic 8 with reason 5 and live 8 rewired and have recently brought in the komplete 7, sylenth and max5 plug-ins. My aim is to assign the behringer to logic to control it's tracks in the mixer, the apc40 with ableton (obviously!) and the keyboard switching between all three daws but more importantly keeping the mpc pads for the kong drum designer in reason.
    Am I right in thinking logics environment section can offer me a workable option to get complete routing control over the midi messaging between the controllers and the daws??
    Have I explained myself right?
    Any help is greatly appreciated and thanks in advance

    and I forgot to mention I'd like to be able to send and recieve audio and midi between the 3 daws like using one to sequence another and say be able to export midi/audio to ableton and start it playing.
    I also dj so I would ultimately prefer to be creating and compiling drum and synth loops and easily pass them to ableton whether in the studio or at a gig.

  • How do i use one midi controller and ignore another in Mainstage 2.1?

    I am running Mainstage and Ableton Live in parallel and use two midi controllers. I would like the APC40 to just be recognized by Live, and my MPK49 to be recognized by Mainstage and Live. Right now, I get midi signal from Mainstage on both midi controllers and can't seem to figure out how to assign just Mainstage to just get midi input from the MPK49. Any ideas? Thanks.

    Yes, that worked a the device popups were set to all. Fixed that and moved on. Thanks! However another similar problem has come up...
    The sliders on the APC40 (which I just want to be recognized by Live), are affecting the Mainstage Channel Strips volume sliders. I can't seem to figure how to make Mainstage ignore this as all of the APC40 sliders are effecting Channel Strip 1. Thanks.

  • Use midi controller with Soundtrack?

    I have an m-audio keyboard. Can I use it to record a track? please tell me how. Thanks

    no
    Soundtrack or Soundtrack pro doesn't have Midi insturments
    you want Garageband, Logic Express or Logic pro
    DAVE

  • How do you pick a specific midi controller to record in Logic?

    How do I define a specific midi controller to use? I have been working with one controller for years (Yamaha Motif). I'm a guitarist and I just picked up a new midi guitar controller (Axon 50). When I boot up Logic with the Axon 50 turned on, Logic doesn't see midi note on and note off data. I have to open up the Axon 50 editor for the note on/off datat to come thru. Is there a place in Logic where I can actually tell it which midi controller to receive from? In Cubase 4 you can specify which controller to receive from on each track in the inspector. Where is this feature in Logic?

    Logic will listen to all MIDI data coming in from all ports, with the exception that if you have defined a Logic-supported control surface o a particular port, that port data will be intercepted by the control surface handling, and not routed to the sequencer.
    You can isolate individual ports in the environment by changing the routing of the Physical Input environment object, so check there is no routing handling on your physical input object.

Maybe you are looking for

  • I can't view photos in my iPod Nano

    Please, someone help me. I'm doing exactly how the manual says that I must do, but the photos doens't appear. Photo Library don't appear, only "photos", but not Photo library. What should I do?

  • Creating SELECT query between 3 tables

    Hi there, Im trying to create a SELECT query between 3 tables and it is driving me round the bend. I have 3 tables connected together which are: MODUL modulid modulname modulevel STUDENT studentid surname inits s e x phone email logon STUDREGOCCUR mo

  • How to Edit "Open With" in contextual menu

    For instance, while right clicking on a jpeg the "Open With" pop up displays Pixelmator, which is no longer installed, it also shows Photoshop Elements, but that version is on a backup disk, not the current disk, also there is no option to open in Ap

  • Essbase Audit Files not Updating

    Hi All, My Essbase Audit files are not updating....both .ALG and .ATX files. They used to update up to the last month but those are not updating. I checked the .cfg file and is okay with SAUDITR. Please suggest.

  • Audigy SE Questi

    I apologize if most of these questions have already been discussed, there is so much on his board it is hard to follow. I just upgraded to Vista, being completely unaware that Creative did not have properly working drivers. I previously was using a L