Using a true Boolean to increment a counter

Hi everyone,
I would like to make a simple counter that just waits until a true boolean is passed and then counts 1, then waits until it is passed again and goes up to 2, and so on. Just a single increment everytime a true is passed. I'm sure this is pretty simple but I have had no luck so far.
Solved!
Go to Solution.

Why is the signal coming from another loop?  You might want to describe your system.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Similar Messages

  • Boolean to increment a counter

    I want a VI that would increment a counter every time a boolean gives a true value. In other words, every time a switch is pressed, the counter should increment to the next whole number and so on.
    Solved!
    Go to Solution.

     set mechanical action of your button to switch until release, if you want yor increment is every click is increment by 1
    Thank you & Best regards
    syrpimp
    =======================================================
    “You must continue to gain expertise, but avoid thinking like an expert." -Denis Waitley
    Attachments:
    Counter.vi ‏14 KB

  • Does restoring using Acronis True Image Home 2011 affects my Authorized Computer count?

    Does restoring using Acronis True Image Home 2011 affects my Authorized Computer count?

    Not that I know of. I have Acronis on all of my PCs, and have had to use a reinstall by the tib file. I believe (someone correct me if I'm wrong) Apple senses ip address, PC hardware configurations etc. to confirm a Authorized Computer Count. I had done a total reinstall of Windows 7, and iTunes still acknowledged that PC as being one of my Authorized PCs. So an Acronis restore should not be no problem. I also think that if a person maxes out on their 5 limit, that Apple allows you to be able to"re-set" it. Again,those who are more proficient here, can also confirm that.

  • 11.0.2 does not increment play count

    I have smart playlists that are based on play count.  Sometimes as iTunes plays the count increments and sometimes it doesn't.  When it does, it replaces the tune it was just playing insteads of adding a new tune to the bottom of the list.  When it doesn't iTunes moves down the list.  Eventually it gets to the bottom and stops.  If the count criteria is < 1, it should increment the count, remove the tune from the list and add another at the bottom but it doesn't.
    I have cross-fade turned off.  I understand this used to be a problem that was fixed.  However, I left it off anyhow.
    What else do I need to check/correct/do?

    I made some screen shots to demonstrate.  First is the initial list when I started to play it followed by the list when the last track had completed.  This demonstates how some tracks get their count incremented and are replaced while others do not.
    BTW, it does appear that the list is updated in place rather than at the end.  I was looking for a list that would never stop playing but I guess that is impossible.  No matter, I can make it long enough to work but I can't figure out why sometimes the count gets incremented and sometimes it doesn't

  • How do I use transparent=true in my Air app but still displaying swf ?

    How do I use transparent=true in my Air app but still displaying swf's files ?
    The thing is that I created a customized chrome, and looks nice when it is transparent cause seems to be floating, it works as a browser, but the problem is that when I navigate with it into a page wich contains embedded youtube videos, as in example, or any other swf file... it just doesn't show...
    Any help ? thanks in advance,

    Contact iTunes Support: http://www.apple.com/support/itunes/contact/

  • In mac os 10.6.6 i can use shift alt F11 to  incremental decrease volume , but now in LION i can't use it , what is the problem ???

    in mac os 10.6.6 i can use shift alt F11 to  incremental decrease volume , but now in LION i can't use it , what is the problem ???

    HellO:
    What type of keyboard do you have?
    In any event, system preferences>keyboard has a chck box to change the behavior of "F" keys.
    Barry

  • Using separate_frame=true and trying to close the applet window after...

    We are using separate_frame=true and trying to close the applet window (the one with the large gray box) after using the following post-form trigger:
    if :system.last_form = 0 then     
         message('Please wait while Forms closes - '||:system.last_form);     
         web.show_document('/forms/html/close.htm','_self');     
    end if;
    This works fine for the first form we open, but if that same form using Open_Form to open a child form we have a problem. When the child form is closed the user is returned to the parent calling form (which is expected), but then when the parent form is closed the separate applet window fails to close. Any suggestions?

    I guess you mis-interpreted the value of :SYSTEM.LAST_FORM. From the online-help:
    SYSTEM.LAST_FORM represents the form document ID of the previous form in a multi-form application, where multiple forms have been invoked using OPEN_FORM.So LAST_FORM shows always the ID of the last activated form, and this will never be 0 if you issued one OPEN_FORM in your application.

  • XSLT: how to increment a counter

    How do I increment a counter defined in XSLT?
    i.e
    <xsl:variable name="counter"/> //global var?
    <xsl:for-each select="....">
    <!--How do I assign $counter+1 to the variable counter defined above??? -->
    <xsl:assign???? name="counter">
    <xsl:value-of select="$counter+1"/>
    </xsl:assign> //?????
    </xsl:for-each>
    <!-- expect a result of total $counter here-->

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by hsiuhsien:
    How do I increment a counter defined in XSLT?
    i.e
    <xsl:variable name="counter"/> //global var?
    <xsl:for-each select="....">
    <!--How do I assign $counter+1 to the variable counter defined above??? -->
    <xsl:assign???? name="counter">
    <xsl:value-of select="$counter+1"/>
    </xsl:assign> //?????
    </xsl:for-each>
    <!-- expect a result of total $counter here--><HR></BLOCKQUOTE>
    http://technet.oracle.com:89/ubb/Forum11/HTML/005426.html
    Malik Graves-Pryor

  • Any idea why in Numbers my COUNTIFS formula keeps breaking? For daycare purpose, I use a spreadsheet that helps me to count how many children I have at 3:15, 4:15 and 5:00. COUNTIFS works well when I create it but breaks after a while. Also I am using a p

    Any idea why in Numbers my COUNTIFS formula keeps breaking? For daycare purpose, I use a spreadsheet that helps me to count how many children I have at 3:15, 4:15 and 5:00. COUNTIFS works well when I create it but breaks after a while. Also I am using a pop-up menu in the cells in time format, does it have any consequence on the formula?

    Any idea why in Numbers my COUNTIFS formula keeps breaking? For daycare purpose, I use a spreadsheet that helps me to count how many children I have at 3:15, 4:15 and 5:00. COUNTIFS works well when I create it but breaks after a while. Also I am using a pop-up menu in the cells in time format, does it have any consequence on the formula?

  • Are there any risks when using useMessageListener="true" for JMS Adapter?

    As far as I heard there are some risks when using
    useMessageListener="true"
    (instead of "false"). Is this true?
    Or does the Partnerlink to JMS adapter became unstable?
    When exactly is it recommended to use "true" instead of "false"?
    Peter

    Hi Peter,
    What version are you using : 10.1.2 or 10.1.3 ? By default in 10.1.3 the JMS wizard sets the useMessageListener to False . I would recommned to keep it to this value unless there is a strong reason to change otherwise.
    BR,
    Mihai

  • Using a "Sum" Calculated Field on a "Count" query column?

    Here's my query using the Query Report Builder:
    SELECT Col1, COUNT(Col1) AS Count_Column
    FROM Table
    GROUP BY Col1
    It generates a report that lists all the values of column
    "Col1" and how many times each value was used in Col1
    For instance, if Col1 contained the value 'A' 12 times, 'B' 6
    times, and 'C' 19 times, the report would generate this:
    A - 12
    B - 6
    C - 19
    What i need as a column footer is the total count of all the
    values, which in this case 12+6+19=37
    I am using a calculated field, setting the data type to
    Double, the calcuation to Sum, and the perform calculation on to
    'query.Count_Column'. Reset Field When is set to None.
    When I run the report, it doubles the last number in the
    report's Count column (19) and displays 38 on the page. I tested
    this with another column and it doubled the last number in the
    report as well.
    How can I get it to properly Sum my Count_Column?

    Hi,
    You need to check note 208366.1 which explains why totals can be blank. Without knowing the detail of you decode function it is hard to say what needs to be changed. Try putting a sum in front of the decode e.g.
    sum(decode(period, 'Jan period', value, 0))
    Hope that helps,
    Rod West

  • PTG error when using translate_params=true

    I have problems using Russian language with Personalization Portal. Renaming or creating folder in Russian results in '??????' name.
    I think it's because Apache JServ don't understand charset when using forms parameters.
    I tried to use following line in zone.properties with Apache JServ.
    servlet.oracle.jsp.JspServlet.initArgs=translate_params=true.
    Result simple JSP, using form parameters converts correctly, but I can't login as user in Personalisation Portal (results in JavaExeption). I can login as Administrator but renaming folder in Russian again results in '???????' name.
    Help please!

    As far as I understand, the way you use destroyApp(true) in commandAction is wrong. Replace it with notifyDestroyed()
    If you're interested, check [MIDlet class javadocs|http://java.sun.com/javame/reference/apis/jsr118/javax/microedition/midlet/MIDlet.html] to understand why is that.
    I would also remove notifyDestroyed() from destroyApp. If Eclipse uses Wireless Toolkit as emulator, you can take a look into source code of application demos that are included in WTK to find out how to use these methods properly.

  • Button action bypass validation without using Immediate=true

    I have a Form in a page, and a "Query" button to popup a dialog for user to search some information, and help user to fill-in some fields.
    I want the "Query" button to ignoral all the validations in the Form (e.g.: required fields). I tried to set the Immedate for the button, but I found I cannot set any inputText value inside ReturnListener event-handler with Immedate is true.
    Is there anyway to have a button to action, and bypass all the validation without using Immediate=true?
    Thanks,
    Samson Fu

    Hi,
    if you are on JDeveloper 11g, have a look at the skipValidation property on the ADF binding and read: http://oracle.com/technology/products/jdev/tips/fnimphius/ppr_subform/index.html
    You can implement a similar approach
    Frank

  • I get the error as 'VI's using Latched snap Boolean cannot be used'

    Dear sir/mam,
                        When I am trying to load a Boolean switch/latch until released into RT,I get the error as 'VI's using Latched snap Boolean cannot be used'.I want to know the reason why we cant downloaded these boolean into RT.what is the difference it cause in the RT.
    Thanking you
    Jayanthi.K

    Dear sir,
           I have attached the fig,In the figure 2 you can see the 6 diferents mechanical actions available for LabVIEW, however for the VIs that are going to be embedded the only 4 supported are
    the first two colums. If you use one of the two in the last colum
    n you will get the warning message when trying to download the application.
        This is my doubt.why NI Restrict these two mechanical action which is cant be downloaded into RT.It indicates the error snap/boolean latch cant be downloaded.
         I want to know the reason.........with full Technical details..........
    can u pls help me and send some more information...............with turorials...
    Thanks
    jayanthi.k
    Attachments:
    boolean.jpg ‏22 KB

  • ATV2 won't increment play count

    This has been discussed in the past. Was a problem with ATV2 when it first came out, then fixed. Now with the latest update again. It does not increment the play count of content played streamed from the iTunes library. Well that's about the only content one can play. I do have it checked in the iTunes prefs to increment play count. I've tried unchecking, quitting iTunes, and then rechecking. I've rebooted, I've cursed;) 
    I'm streaming from my iMac i7 via Wireless N from my Airport Extreme. I have a great signal. Everything plays beautifully, no problem. In fact when I finish an episode of a TV show it is hidden, like it's marked play. But if I leave the ATV, it goes to sleep, it never updates iTunes. So the next time when I go to TV shows on my ATV2 it's there as un watched.
    Does anyone have any idea how I might get this to work? It's a real bother as playlists are based on when media is watched.
    Thanks

    Winston Churchill wrote:
    I think we all just need to wait for a fix.
    a fix for what?
    playcounts increment fine for me.

Maybe you are looking for