Using Acrobat 9 and suddenly there is no selected page range in the print box. Only selected PDF files or all PDF files. Am I doing something wrong? I need to print only three pages from the document
There is no selected print page range in the print box. Only selected PDF file and all PDF files. Any suggestions?
Well, I looked for where to delete this but didn't see it.
NEVERMIND; I forced iPhoto to quit and restarted and everything seems fine.
BTW, I did get one thing wrong. When I looked at both iPhoto libraries with FINDER, the active one and the archived one both showed content as far as file size goes.
It was because I was viewing the files through Adobe Bridge that it was showing 0 GB's; for whatever reason.
Similar Messages
-
I have used complete my album a few times and each time the single I bought first - before getting the option to complete - doesn't get listed in the album. It wouldn't matter too much but usually it's the best track! Also for artists like Plan B where there is a narrative to the album you have a piece missing! Is the bottom line that unless I buy the track from the album (rather then the single) then that's how it works? If so there should be some way of fixing it?
You might be able to do some of this with retaining the original information if you enter it into the sort ___ fields. Never worked with those myself.
-
I need help understanding how the icloud back-up/retreival process works and how to use it at maximum efficiency
Welcome to the Apple community.
You must remember, that whilst you see Internet speeds quoted as say 8, 12, 16, 30 Mb per second etc, this refers to download speed. most service providers will give you around 1 Mb per second as upload speed. At these speeds a gigabyte of information will take around about 2 1/4 hours to upload.
So in answer to your question, no I don't think you are doing anything wrong. -
This is my first time joining the Apple Support Communities Help Line.
Please refer to the subject line for my discussion/Question!Try here:
iOS: Troubleshooting backup issues in iTunes
Does the backup complete? -
After creating a new slideshow I export it with the setting HD 1080p it is then saved as a .mov i then create a dvd in idvd and the quality is not as good as the original photo's when viewed on the monitor or a TV, am i doing something wrong?
DVD's are only 640 x 480 (interlaced), so yes, the quality is not nearly as good. You should probably create your .mov in DV format to best match the DVD format
-
Occasionally ill try downloading an App through my Macbook Pro 13.5 & it directs me to iTunes to be downloaded. So, I go to iTunes and download the App I need. For instance, Amazon. I go into 'My Apps' in iTunes and try clicking on one of my DL Apps, but nothing happens. Why can't I access the Apps, which I downloaded through iTunes.?I believe I'm doing something wrong and not that the issue is iTunes itself. I have OS X Yosemite 10.10.1. I am due for an upgrade from that software and also an upgrade for iTunes as well, but that shouldn't be the problem. I've tried everything on my end to troubleshoot. I don't really have the time during the day to call in and troubleshoot, so thats why I'm asking the community. Please help with this problem if anyone can. Thank You!
Once you download an iOS app, you cannot run that app from the computer. That can only be run from an iOS device. You cannot download Mac Apps from the iTunes App Store, those are downloaded from the Mac App Store. Two different places. If you want a Mac app that will run on your Mac, you need to download that from the Mac App Store. iTunes App Store only has iOS apps that work on iOS devices, iPhone, iPad, or iPod.
-
I have a Windows 8.1 and it's even running slow. I'm a complete novice with computers (I've only had this one for 3 weeks) and I'm probably doing something wrong, but I haven't a clue what.
The tools are not responding when I try to use them. Some of them work sometimes, but not others and some don't work at all. I'm in a design class online and I need these tools desperately. I have an assignment due Monday and I'm losing the whole weekend because Tech Support is only open M-F!
Any help anyone can give me will be appreciated.
Thanks,
Rose IrelandMaybe these links provide some pertinent information.
Optimize performance | Photoshop CS4, CS5, CS6, CC
Photoshop: Basic Troubleshooting steps to fix most issues -
I used Match, and now there are artists missing when I search by artist, yet they are in my library when I search by song. If they are in many song list, why aren't they in my artist list? Also I can't sort my songs list by artist on iPhone, so their music is basically lost in space....help
It's not clear from your post, but you do realise
that if you import a cd as a compilation, it will not
appear under artists? This is done to save the iPod
being cluttered up with single artists entries who
might have only one song listed.
I wasn't aware of that. It's true that I haven't been using the "compilation" tag for a long time. I've only started using it with iTunes 7 as otherwise with Coverflow I would have one album cover for each artist in a compilation. Before that my compilations weren't tagged as such as that is quite probably why each artist from compilations showed up when browsing by artists.
Message was edited by: Didou -
If someone has used Xcelsius 2008, and suddenly there is requirement to design the dashboard in any other BO tool, then will he/she be able to design the dashboards as comfortably as in Xcelsius.
Hi,
Each and every tool has its own flexibility to run. Coming to your question, the use of dashboards is to view the data by more interactive other tool cannot comprise it. when you say, if i want to develop the same sort of requirement in other BO tool, then you need to check with positive and negative of the tool to accommodate your logic.
--SumanT -
Ive just signed up for the adobe photoshop pack, i use a mac, when i click download, nothing is happening.. Am I doing something wrong?? When I try and open the software I already had from trial it says its expired, or i need to use a serial number... HELP Anyone else experienced this?
If there is an option to "license this software", and it takes you to a sign-in page with username and password (not a serial number) - then just go ahead and sign in.
If it insists on a serial number you need to uninstall the trial. Then try to download again. -
I hope I'm submitting this properly, I apologize if this irritates anyone because of improper etiquette. Why do applications (Illustrator, Pages, Mail) launch so slowly with spinning ball (about a minute to 90 seconds) when Mac is connected to our LAN, but when I disconnected Mac from the LAN, those applications launch instantly and function normally? This is a condition which seemed to start just recently and abruptly. These applications reside on, and are launched from the startup drive, not from a network drive. Also, we have a NAS drive on the LAN that we connect to that also takes a minute or two to mount, when it used to (before this problem) mount on the desktop in a matter of about 5 seconds. We have three identical Mac Pros on the LAN, and they all have this problem when launching and using the above mentioned applications. When I physically unplug the network cable from the Mac, all applications launch instantly and function normally. I know very little about networks, so I can't begin to test or change any setting pertaining to our network - if that is where the problem lies. The only recent change to our network situation is that we lost or our internet and phone service due to massive flooding here in Minot, North Dakota (our ISP tells us the communication lines are under water and shorting out). But shouldn't our LAN still function even though we have lost our connection to the outside world? Thanks so much, in advance, for helping me solve this problem. Sheldon.
Hi there.
A slow LAN can have many things so its going slow.
1) is your lan 1gbit speed? (full duplex)
2) are the macs also 1Gbit speed? (full duplex)
3) does your nas has a firewall? (so you can see what the mac asking there)
4) on the macs is the firewall on? (does the programms can pass the fw?)
5) how big is the nas and how many files/dirctorys are on the nas? (big folders speeds down )
many questions, but sometimes there is a solution.
regards tim -
I have downloaded ADE 3 on my macbook. It did recognize my Aluratek Libre the first time I used it but now it does not. I plug my libre in start ADE and the Libre does not show up for me to transfer my ebooks from the library to my libre. Help pls
If you have iTunes 11 on your computer then you can enable the left-hand sidebar on it via option-command-S on a Mac, control-S on a PC - when connected (and if your computer's iTunes is up-to-date) your iPad should then appear on that sidebar under a 'Devices' heading :
If you select the iPad on that sidebar you can then use the Movies tab on the right-hand side of the iTunes screen to select and sync that film to your iPad's Videos app.
Has your iPad been synced to the computer before ? If not then you might find this page for syncing to a new computer useful : https://discussions.apple.com/docs/DOC-3141 -
Hello. I have just built a website using iWeb but cannot upload it. I curently have the 25gb account. There doesn't appear to be any facility here for the net. Am I correct in thinking I need an upgrade, or am I doing something wrong? Thanks
iCloud does not provide website hosting. You will need to find another website hosting service - there are many to choose from - and upload your site there. How you do this depends on what version of iWeb you have.
In order to upload your existing site in iWeb '09 and above:
Click on the name of the site in the sidebar: the publishing settings pane will open. Set 'Publish to' to 'FTP'. Enter the name of the site and a contact address (if desired).
In the 'FTP Server Settings' section you will need to know the server address (your hosting service can tell you that), and your username and password for that service. Your site will be published in a folder with its name at root level of the server, with an index.html file at root level (which will overwrite any index.html file which may be there already). The 'Directory/Path' field may need to include a path such as '/webspace/' or 'ht_docs/' - this is dependent on your hosting service and they should tell you this. If you want to publish within a folder you can add that to the path.
You can then click the 'Test connection' button so that iWeb can check that it can get access to your server space. You should enter the URL of the site in the 'URL' field so that rss feeds and internal links have the correct address.
To publish using an earlier version of iWeb:
From the File menu choose 'Publish to a folder'. You should create a folder somewhere convenient specifically for this and choose it when publishing to a folder: this folder should not contain anything else.
You now need an FTP program (FTP is the 'protocol' used for uploading) to upload the contents of the folder to your server.Cyberduck is free (donation requested): Transmit is $34 but I think better. You will need the server address (your hosting service can tell you that), and your username and password for that service. You can drag the contents of your folder to your webspace, or create a folder there and drag the contents to that if you prefer.
Some facilities that iWeb provided when hosted on MobileMe will not work on other servers: comments on weblogs and photos, password-protecting your site (some hosts may provide this), searching in the weblog, and a hits counter (again, some hosts can provide code for this). Slideshows in iWeb will work on other hosts than MobileMe (they use different code when FTPing which doesn't depend on scripts hosted on MobileMe as the MobileMe version does); however there is an issue with the 'buttons' which control the slideshow which are images hosted on me.com - these depend on images which used to be hosted on MobileMe. The poster 'Old Toad' on the Apple Forums has provided a workaround, described at http://oldtoadstutorials.net/No.26.html. -
Hi
I have an issue from Septembers security updates where three updates from the same software update group are showing as unknown status rather than required / not required / installed etc.
There are multiple other updates in the same update group and they are all displaying correctly with the figures I would roughly expect.
I would have expected if something was wrong with the clients not returning software update scans that all the updates in this software update group (all deployed automatically as part of the same ADR) would show the same status of unknown, rather than just
three of them.
The updates in question are: KB2894842, KB2972215 & KB2977629 (First two .net 4.0 and last one IE11).
Now these updates would largely be not required in our organisation as for the most part we use different versions so I would expect them to show as not required.
Short of kicking off a mass software update scan cycle I don't know a) why this has happened b) if a scan cycle will fix it. Our clients scan every week and its been several weeks since the updates were deployed, that and the other updates have all reported
back in.
Anyone have any ideas? Its making the compliance results look quite poor :(
Thanks
JonathanHi,
Is there any clue in the logs? Please review WUAHandler.log.
What is the code you get when you run compliance report, like that in the following thread:
http://social.technet.microsoft.com/Forums/en-US/becda545-4a5e-4ea3-bd83-8c7026767af5/software-update-compliance-report-showing-status-unknown?forum=configmanagerdeployment -
I am new to Lightroom 5 and find I cannot crop my photos as easily as I did in iPhoto. I would like to be able to drag them if I choose a custom size or crop them from the bottom as well as from the top but my two sided arrow disappears when I work at the bottom of the photo. Am I doing something wrong?
I would suggest you trash the prefs.
Quit Lightroom
Launch Finder and find the user Library by clicking the Go menu whilst holding down the Optn (alt) key (n.b. the library is hidden until you press the optn key) and inside the Library folder select the preferences folder. Then trash the following file:
com.adobe.Lightroom5.plist
Then re-launch Lightroom
It’s then worth clearing each cache. Go to the top menu bar:
Lightroom >> Preferences >> File Handling (tab)
Click the Purge Cache button under Camera Raw Cache Settings; then click the Purge Cache button under Video Cache Settings. Finally click OK. -
Can I delete files in "All My Files" under Finder and Favorites without deleting them in the actual folders? If they will be deleted from the original folders then how do I put them on the external hard drive to save the documents, photos, and videos?
Switch to the Finder app and open its preferences.
Remove the check mark on the items you don't want displayed in the Sidebar tab.
The originals are not removed from the machine.
Maybe you are looking for
-
Hi I am new this XML Publisher. We are working on using BPA/XML Publisher to print the AR Invoice. I have two questions 1. How to print the values of subtotal, tax and Invoice Total in only last page 2. How to print the Running total of extend amount
-
CFMX 6.1's Virtual Memory Use problem!!
I appologise for the long post in advance... Ok... so I have this script that, using cfdirectory, will check a directory for any files that may have been uploaded, if there are files, it loops through the results and reads the files one at a time, li
-
Removal of auto reservation being created
Hello Team Please help me to remove all reservation creation for production orders created for open sales order items. The materials (stock) unnecessarily reserved against the production orders and here we issue material depending on actual consumpti
-
Cisco Prime Infrastructure 1.2 - web browser freezes when managing rogue APs alarms
Hello all, has anybody faced a freezing problem when you click in Cisco Prime Infrastructure 1.2 down on alarm bar and then to Rogue AP alarms and then try to add an annotitation or change a rogue alarm to Friendly? I tried it on different PC, differ
-
Is the Ipad car charger the same one as my IPhone 3GS car charger?