Using AIA for Error Handling. Logging and Notification Services
hi,
In our project we usie OSB and BPEL for integrating different applications.
There is a suggestion that we should use AIA to just use the Error Handling, Logging and Notification services from AIA. I am not sure about this use case, as most of these services mentioned can be replicated in BPEL. Except for the AIAAsyncExceptionHandling BPEL process, i guess all other functionalties provided by AIA can be easily developed in BPEL or OSB alone.
However, would like to hear from you guys about this particular use case. Is it advisable?
Hi,
It's an issue with 10.1.3.4 OBIEE. (whem using IBM LDAP)
References
BUG:7363517 - INTERNAL BI FAILURE ON STARTUP
They issue can be resolved by setting LD_PRELOAD=/path/libibmldap.so
Here are the steps:
. sa-init.sh
export LD_PRELOAD=/path/libibmldap.so
Similar Messages
-
Error handling, logging and monitoring business process
I would like to know more about error handling, logging and monitoring in business process? Can someone give more information on this one?
Chandran
Please refer to following tutorials to understand each of these topics in detail:
Validations:
http://www.orafmwschool.com/validations/
Exception Handling:
http://www.orafmwschool.com/exception-handling/
Fault Management Tutorial:
http://www.orafmwschool.com/fault-management-tutorial/
Business Activity Monitoring Tutorial:
http://www.orafmwschool.com/bam-tutorial/
You'll have to refer to Oracle documentation to understand more finer details.
-Amjad. -
Need to Turn it OFF the Notification used by the AIA Common Error Handler.
Hi All,
My requirement is to turn it off the Notifcation send by the AIA common Error Handler, when the error occurs in the AIA ecosystem.
Error Handling framework given by AIA does the Notification and Logging feature. In my case I need only the logging, but not the Notification. Notification has to be turned off for a time and has to be turned on when it is required.
1) I can acheive this by removeing the email account file (ie. ns_email.xml) from the server directory and can be replaced at the time when required,but this needs the restart of the Server.
Any Idea how to turn it off the notification and turn it on when required ?
Thanks,
Ashok.Hi Rohit,
Thanks for your reply.
Is there any way to turn it off the Notification, because if we retire the ReadJMSNotification Service all the error message are stayed in the Topic and we have to manually drain the message from topic.
And one more thing is how the error messages are published to that AIA.AIA_Error_Topic.
Thanks,
Ashok. -
BPM for error handling and acknowledgements
Hi,
Can any one tell me how to handle BPM for error handling and acknowledgements in one scenario.
Please send me the link if you have other wise give me the solution on the same.
Thanks,
NageshHi !
Just check out these links This might help you.
Usually Application Level Acknowledgement is considered during Sync communication. If you are using RFC, you can make use of Sync communication. So you can handle it without bpm, provided your both sender and receiver are sync interfaces.
To know about Ack-
http://help.sap.com/saphelp_nw2004s/helpdata/en/f4/8620c6b58c422c960c53f3ed71b432/content.htm
you can not dirrectly access the content of the ACK, however the BPM shows different behaviours based on the ACK status. E.g. if the ACK contains a success message the BPM will continue in its normal process, if the ACK contains a permanent error, it will either stop or go through an exception branch (provided such a branch has been defined). Have a look at the documentation: http://help.sap.com/saphelp_nw04/helpdata/en/43/65ce41ae343e2be10000000a1553f6/content.htm It doesnt"t state the above mentioned behaviour in detail but says that you need to define an exception branch.
The trickiest part is always to find out, when you will get a transient vs. as permanent error ack. If you are using ACKs with Proxies refer also to this link http://help.sap.com/saphelp_nw04/helpdata/en/29/345d3b7c32a527e10000000a114084/content.htm and this http://help.sap.com/saphelp_nw04/helpdata/en/f4/8620c6b58c422c960c53f3ed71b432/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/29/345d3b7c32a527e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/7b/94553b4d53273de10000000a114084/content.htm
<b>The following link has entire configuration of Receiver XI Adapter (including acknowledgements)</b>
http://help.sap.com/saphelp_nw04/helpdata/en/f4/0a1640a991c742e10000000a1550b0/content.htm
<b> eror handling in BPM.
</b>
1. CCMS monitoring
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/42fb24ff-0a01-0010-d48d-ed27a70205a8
2. BPM Monitoring
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e7bc3a5a-0501-0010-1095-eb47159e169c
3. Monitoring XML Messages http://help.sap.com/saphelp_nw04/helpdata/en/41/b715045ffc11d5b3ea0050da403d6a/frameset.htm
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
monitoring BPm https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e7bc3a5a-0501-0010-1095-eb47159e169c
Reconciliation of Messages in BPM - /people/krishna.moorthyp/blog/2006/04/08/reconciliation-of-messages-in-bpm
Also see the below BPM related links
check list for BPM https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3bf550d4-0201-0010-b2ae-8569d193124e
/people/shabarish.vijayakumar/blog/2005/08/03/xpath-to-show-the-path-multiple-receivers
http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/62/dcef46dae42142911c8f14ca7a7c39/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/de/766840bf0cbf49e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cb/15163ff8519a06e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm
Many other examples can be found under the following link at help.sap.com
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
And some weblogs
https://weblogs.sdn.sap.com/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken]
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm *****
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
/people/michal.krawczyk2/blog/2005/06/11/xi-how-to-retrieve-messageid-from-a-bpm
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
/people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi
/people/michal.krawczyk2/blog/2005/09/04/xi-do-you-realy-enjoy-clicking-and-waiting-while-tracing-bpm-steps *****
/people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements *****
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
/people/kannan.kailas/blog/2005/12/07/posting-multiple-idocs-with-acknowledgement
Also have a look at these seminars,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/daea5871-0701-0010-12aa-c3a0c6d54e02
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/e8515171-0701-0010-be98-e37bec4706cc
Thanks !!!
Regards
Abhishek Agrahari
Questions are welcome here!!
<b>Also mark helpful answers by rewarding points</b> -
Option for error handling for DTP, ' no updata, no reporting" and "deactiva
Hello Gurus,
option for error handling for DTP, ' no updata, no reporting" and "deactivated" , please give some explanation and instance for them?
Many Thanks,On the Update tab page, specify how you want the system to respond to data records with errors:
a. No update, no reporting (default)
If errors occur, the system terminates the update of the entire data package. The request is not released for reporting. However, the system continues to check the records.
b. Update valid records, no reporting (request red)
This option allows you to update valid data. This data is only released for reporting after the administrator checks the incorrect records that have not been updated and manually releases the request by setting the overall status on the Status tab page in the monitor (QM action).
c. Update valid records, reporting possible
Valid records can be reported immediately. Automatic follow-up actions, such as adjusting the aggregates, are also carried out.
http://help.sap.com/saphelp_smehp1/helpdata/en/42/fbd598481e1a61e10000000a422035/content.htm
Hope it helps.
rgds, Ghuru -
I've been using samsung for a long time and I just changed into an iPhone 5s and the most important thing I need is my calendar appointments , but in the notification center it doesn't show my events for tomorrow and it doesn't even show more than 1 event , will there be an updated or this soon? Or should I just shift back to samsung?????
Go to settings/notification centre and make sure today vie and calendar day view are both on
-
Hello !! Because if I talk daily to the same Person for FaceTime and two are always in the same place, once day face time no prolem speak for another day and I have to use skype for error appearing face time ? Thanks for your answers.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
Cheers, Tom -
Using the general error handler on an embedded rt target
I would like to know how the general error handler can be best employed
with Labview RT on a Compact Fieldpoint controller. Clearly no
dialogue options are valid so how can error information be accessed
remotely - is there an error log file available on the controller?I think there are plenty of ways to handle errors with Labview RT on a Fieldpoint controller.
Usually I use the general error handler vi to catch the error and get the error message (sure, no dialog), then write the eroor message into a log file (ordinary text file created on the controller), and/or send the eroor message through TCP/IP network to the host. You can use FTP to open, read and tranfer the log file at host. Hope help.
Xu -
Error handling --important and urgetn plzz
Hi friends ,
i wnat to know the steps for error handling for the follwoing scnarios . plz help me
FULL LOAD-- MASTER DATA --- PSA AND NO PSA LOAD FAILED
DELTA LOAD-- MASTER DATA --- PSA AND NO PSA LOAD FAILED
FULL LOAD-- TRANSCATIONAL DATA--NO PSA AND WITH PSA.
LOAD FAILED
DELTA LOAD TRANSACTIONAL DATA -- NO PSA AND PSA LOAD FAILED .
plz help me how to handle in this type of scnerios. Iam new to Bw and confusing alot in this.
Points wil be awarded.
Regards,
PavanHi Pavan,
not sure what exactly you are looking for, but maybe this link will give you some help!
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Each error needs it's own treatment, depending on the reason it occured.
regards
Siggi -
I cannot access my old email address anymore, however I have used it for my apple ID and now I want to delete it because the account has never been verified in the first place so my password for it doesn't work. So when I want to download apps I have to sign in with apple id but I can't so I made a new one, However I can't seem to be able to delete the old one. What do I do?
You can't merge Apple IDs. You also can't cancel (delete) and existing ID, you can only choose to stop using it.
If your old ID was compromised and you can no longer access it, you'll have to contact Apple for assistance. Go to https://expresslane.apple.com ; click 'See all products and services' at the bottom of the page. In the next page click 'More Products and Services, then 'Apple ID'. In the next page select 'Other Apple ID Topics' then then 'Apple ID account Security’. -
I have just started to use Muse for our design agency and learning how to build ourselves a new site, I have managed to create a basic lightbox which contains sliding images, what I need to do now is have a pop up window which goes into detail about the projects, what I would like is a piece of text or icon that when you roll over it and then click a separate window pops up with additional information in, once finished reading the info you can then click to close the box, any advice on how to do this?
The best way to do what you're asking is with the Composition widget. Start with the Tooltip preset, which, by default shows the info on rollover. You can change the option to show on click, which is what you're after. You can also add the close button or have the info disappear on rollout.
David -
When i use language for non-unicode [Russian] and i insert another language
when i use language for non-Unicode [Russian] and i insert another language. it transform to Russian.
i insert Thai language into MS access it transform to Russian type.i try to change anything,CharSet, sun.jnu.encoding.
but it doesn't have any effect.How can i insert Thai data into database and in database shown Thai data not another type.
Thank you for help.My English is not good,Sorrythat is a little-known known issue
Check this post:
http://myitforum.com/cs2/blogs/smslist/archive/2009/01/12/mssms-userlocale-in-mdt-sccm-also-changes-system-locale-9a532hdf.aspx
He details how to modify the ZTIConifgure.xml file. -
i have a old i pod that i use to used and i stop useing it for a few years and now i have a i phone and i want to put all my music on my i pod in to my iphone and it would not allow me to do so what can i do
You need to move the music from the iPod to your iTunes library on your computer then sync with the iPhone.
Assuming you have a PC you can use this: http://www.yamipod.com/main/modules/home/ -
I want to use Firefox for a specific webpage and Safari for the rest of my browsing. I have an Apple macbook and am very new to Firefox
I thought my response was clear, but to reiterate:
1. 10.5.1.42
2. None, nada, zero, zilch. I have no iPhone account with any carrier. There is a deactivated ATT sim card in the3 phone. Someone gave it to me. I only want to use it as an iPod Touch.
3. PC with Windows 7 (I can offer more detailed info, but I am not sure how that would help.
I had already read that link. Reset did not resolve (both hard and soft) -
my airport extreme has connected to a Tplink router, i set my AE in Create network, so i get a problem of Double NAT. How can i repair this probleme because i have to use TPlink for my IP TV and i want to use AE to creat my network and the guest NW. If we don't have a solution for this question, can i set my AE to use the IP TV and how??? I'm using a 4th Airport extreme
No, not unless it is simply a network connection.
How is your IPTV being provided.. if it is using a separate vlan or separate vpi/vci in the adsl connection. Who is your ISP?
Is the TP-Link ADSL?
Is the IPTV using a separate voice channel on adsl?
Or a different vlan.
Sorry but it is something where a definite answer is not possible unless you provide all the details.
The setups are unique to each ISP around the world..
Here is one for our local ISP.
http://www.avenard.org/iptv/Setup.html
He has a section on getting this working with apple router over wireless.. look
http://www.avenard.org/iptv/IPTV_and_Wireless.html
Google around and see if other people have had success.. the whole setup is tricky.. and it is hard if nobody has used it who actually understands networking.
Maybe you are looking for
-
So, in the iTunes store when I enter a gift card code and hit 'redeem' a message pops up and says, "Your session has timed out. Try again." This has been going on for FOUR DAYS. I'm connected to the internet, have the newest version of iTunes my comp
-
An error occured while generating SSRS report.Please advice.
unable to connect to the remote server a connection attempt failed because the connected party dd not properly respond after a period of time, or established connection failed because connected host has failed to respond 69.172.201.134:8080
-
Purchase Order Approval Notifications and Multiple Currencies
All, If I have a user who creates a requisition in EUR and then submits the requisition for approval to someone who has a default currency of USD, the workflow notification will show the value of the requisition in both EUR and USD. This is because t
-
Playback in edit window of PE8 is bad quality and slow/choppy
I just bought a new PC (yesterday!) so I could use this software and make movies. It's running windows 7, on HP pavilion p6310, 64 bit, quad-core processor,1 T hard drive, NVIDIA geforce 9100 graphics, 15-1 memory card reader. My camera is a Canon Z
-
[SOLVED] Disable/remove NetworkManager, and use netctl
Hello! I just installed arch linux and gnome shell with only few applications. I was using netctl-auto, which I enabled using systemctl during the installation. Everything was worked fine, until I installed the packages tlp and tlp-rdw. They pulled i