Using AirPort Extreme Base Station to Connect a Hard Drive

I have a wireless network set up using a wireless device provided by my network provider. What I would like to do is to use my Airport Extreme Base station only to connect a hard drive to it. However when doing so, Airport Utility does not recognize or see the Extreme. The Extreme can only been seen if connected to the router provided by my network provider. How can I set up a wireless hard drive or printer with the Extreme without connecting to the network?

Samir, why you wanna use service provider wireless instrument when you have world class wireless device
you don't need 2 wireless ???
I am not expert but I used common sense, I had linksys N series router but recently I bought TC 1TB
so what I dumped my N router in store and went ahead with TC installation, Trust me it took me 10 minutes to configure my 4 HDD 5 computer printer etc with TC
I am sure you have a ethernet modem too separate from your wireless instrument
try to do a clean installation ( thats where all these people who has problem, trying to connect to their existing network
try setting up your AEBS as fresh wireless device connect to your modem and run Airport Utility
I am sure you will be a happy apple customer
good luck

Similar Messages

Airport extreme base station cant access external hard drive

Just bought the new Airport extreme base station and I cant access the external hard drive. Any suggestions would be great. Everything worked great on the 5th generation airport extreme. But wanted to have the new speeds. But seems not to be worth it if I cant access my external hard drive. Please Help
Thank you in advance for any help.

I saw it in the finder menu but when I clicked on it nothing would happen. Then I went to my airport utility to see if that the extreme saw it. It was in the disk section. But I can't access it. Today it completely disappeared from the utility but my laptop is still online. This thing is crazy.

Airport Extreme Base Station Internet Connection issue

I have a connection question for Airport Extreme Base Station.
I have Comcast cable broadband. I connect that to a Linksys router for
use with my Vonage phone, and then from the Linksys router I connect
via Ethernet to my iMac. I like the direct Ethernet connection for
performance reasons.
In order to set up a home network to connect my Tivo's (and eventually
my PC and printer), I have set up an Airport Extreme Base station and
connected it to the Linksys router from it's ethernet connection to the
WAN (cable modem) input on the Extreme.
I have connected to the Airport network with my iMac, but since I am
connected to the Internet via Ethernet, I cannot tell if my Airport is
connected to the Internet so that I can use it for my Tivo. My PC is
still in storage from a move, so I can't check with that.
My question: How can I tell if my Airport is connected to the Internet
without disabling my Ethernet connection on my iMac?
A few more info points/questions in case it helps answer:
1) I previously used this Airport to connect this iMac wirelessly.
2) Should I be connecting it to the LAN port since it's coming out of
the router?
3) If the connection issue is because I am going through the Linksys
first, can I connect the modem to the airport and then use the LAN port
to connect to the Linksys router?
4) If I have to disable the ethernet connection to test the Airport,
how do I do it? Just unplug it?
I appreciate any help as the online and manual help from Apple is not
quite up to par with such a complex configuration.
Regards
Bill

2) Should I be connecting it to the LAN port since it's coming out of
the router?
No, connecting to the WAN port is fine.
3) If the connection issue is because I am going through the Linksys
first, can I connect the modem to the airport and then use the LAN port
to connect to the Linksys router?
The issue is that you have two routers which effectively creates two networks. Unless this was your original intent, you will want to setup the AEBS as a bridge.
To set up the AirPort Extreme Base Station (AEBS) as a bridge, using the AirPort Admin Utility, connect your computer directly (using an Ethernet cable) to the LAN port of the AEBS, and then, make these settings:
Network tab
- Distribute IP addresses (unchecked)
- Apply the new settings.
- Wait at least 5 minutes.
4) If I have to disable the ethernet connection to test the Airport,
how do I do it? Just unplug it?
Well, that's certainly one way, but an easier way is to temporarily disable the "Built-in Ethernet" in your network configuration.
System Preferences > Network > Show > Network Port Configurations
- Built-in Ethernet (unchecked)

Airport Extreme Base station cannot connect to Westell C90-36R516-01 DSL modem

Hi,
I just purchased a new Airport Extreme Base station for my 15" Macbook Pro. I set everything up this morning per the docs (all cables are connected properly) but the Airport Extreme is flashing an amber LED, which means it cannot establish communication to the network/Internet.
I'm using an old Westell C90-36R516-01 DSL modem that has been working fine up until now. I've tried switching out the Ethernet cables and different powering on/off combos but nothing appears to work. When I connect the Ethernet cable directly into my laptop, I have to power down the DSL modem, power it back on, and then do several refreshes before I finally get an Internet connection.
I read a previous post about unplugging the modem overnight and then plugging it in the next morning to wipe out the MAC address setting. I will be trying that tonight, but I was wondering if there was anything else I could try in the meantime? Or, is it simply a matter of having to get a newer modem from Verizon because this one is 7-8 years old?
Thanks for any help you can provide.
Solved!
Go to Solution.

Hi Max,
Let's start from the beginning,
The ethernet from the modem should be wired to the Wan port of the Airport...
On page 28 of the users manual it says if the light flashes amber you should unplug the power of the modem, wait a few seconds and power up the modem.
I presume you installed the Airport utility from the disk that came with the Airport?
For more information about the reason the light flashes
Open AirPort Utility, select your base station, and then choose Manual Setup from the Base Station menu. ClickBase Station Status to display information about the flashing light
Here is a link to the Manual CLICK HERE
I was hoping to find out more about the Airport utility to see what's it's capable of doing...

Using Airport Extreme Base Station As A Wireless Card?

Hi,
I don't know if this is even possible but here's what I'd like to do:
I've started to share an internet connection with a cousin of mine that lives in my apartment building. The connection is in her apartment and as far as I can tell the wireless signal is coming from the modem she has, there is no stand alone router/ base station. So far I've just been connecting using my iBook with the aiport card in it. No problems. I just had to get the ip number and password from her and I was hooked right up.
Here's my real question:
I also have a G4 Mini with no wireless card in it at all and an Airport Extreme base station from before we started sharing a connection. In the time that we've been sharing I haven't connected to the internet at all using the Mini. Now I'm wondering if there is a way I can hook the Airport Extreme to the Mini and somehow use it as a replacement for a wireless card in the Mini. Thus using the Mini connected to the Airport to connect just the Mini to the internet.
I'm not worried about the iBook and do not wish to reconfigure the way I'm using/ connecting with it. Everything is peachy with that.
If this is possible, how can I do it?
Thank you in advance for any help with this.

Ernest Lohrer wrote:
Hi,
I don't know if this is even possible but here's what I'd like to do:
I've started to share an internet connection with a cousin of mine that lives in my apartment building. The connection is in her apartment and as far as I can tell the wireless signal is coming from the modem she has, there is no stand alone router/ base station.
She has an "integrated" modem/router/access point.
So far I've just been connecting using my iBook with the aiport card in it. No problems. I just had to get the ip number and password from her and I was hooked right up.
Here's my real question:
I also have a G4 Mini with no wireless card in it at all and an Airport Extreme base station from before we started sharing a connection. In the time that we've been sharing I haven't connected to the internet at all using the Mini. Now I'm wondering if there is a way I can hook the Airport Extreme to the Mini and somehow use it as a replacement for a wireless card in the Mini. Thus using the Mini connected to the Airport to connect just the Mini to the internet.
I'm not worried about the iBook and do not wish to reconfigure the way I'm using/ connecting with it. Everything is peachy with that.
If this is possible, how can I do it?
Set up the AEBSn as a "bridge" and connect the G4 Mini to one of the "wired" internet connections.

Using airport extreme base station modem to fax

Can I use an Airport Extreme Base Station with a modem to send faxes?
powerbook G5 Mac OS X (10.4.8)

kersto, Welcome to the discussion area!
No. The built-in 56k modem is only for connecting to a dial-up ISP. There is no ability to send FAXes.

Certain web address not available when using Airport Extreme Base Station

Hello. To access my "secure" account at the local library, I must use a web address that contains a colon followed by a number. I believe that this is a port number, but I confess that all the discussions here regarding ports are going well over my head, and I may be incorrect with this assumption.
My problem is that while I CAN access this site by connecting to my DSL router directly via ethernet cable from my iMac G5, I cannot access the site when connecting to the internet in the mode: iMac Airport to Airport Extreme Base Station to DSL router via ethernet.
The format of the web address is: http://xxxx.yyyy.net:####/zzzzz/, where #### is the number I guess may be specifying a port and causing my problem.
Can anyone advise me, in simple terms, how to get to this address when in the Airport--internet connection mode? Will the solution have any adverse side effects?
Regards and Thanks
iMac G5, 2.5 year old AEBS Mac OS X (10.3.9) Westell 327W 4-port DSL Modem, not using wireless feature.

Very likely the embedded firewall that comes with your AirPort blocks the port you are trying to use.
In order to solve this, best way is to modify the AirPort settings (open the AirPort maintenance app):
Click at the tab "port forwarding" and add the desired port as "public port" to the list. "private IP" is the IP of your Mac and for "private port" type in the port number again.
If you are unsure about the IP of your Mac, look at the network maintenance application.
Well, one side-effect is that you have an open port in your configuration which could cause security issues... but only if you are paranoid So there is nothing to care about (note that without the AirPort inbetween your Mac and your modem, this port would be not blocked and freely accessible

Using Airport Extreme Base Station with Cable Modem

Hi everyone,
I have just bought an Airport Extreme Base Station. I connected it to my cable modem (Surfboard 3100) through the WAN port and my iMac G4 is connected to it through the Ethernet port. Installed the Airport Utility, and configured the base station with the normal settings of DHCP for Internet and DHCP for internal network.
After restarting the base station, my Internet connection from the iMac through the base station is very slow and most of the time will time-out. My Internet connection through my PowerBook G4 using wireless through the base station is ok though.
My question is, is there some setting which I should set for the Ethernet portion of the base station to make my wired connections to the Internet work?
Thanks in advance for any help!
regards,
Weiming
iMac G4 Mac OS X (10.4.10)

Hi,
My iMac G4 does not have an Airport card. I did not physically restarted the base station, its part of the sequence when we update the configuration, that the base station will restart on its own.
regards,
Weiming

Printing wirelessly using airport extreme base station

I recently set up a wireless network at my house using an airport extreme base station. I plugged my usb printer into the base station and, according to the manual, I can print wirelessly. However, when I go to print, after following the manual instructions, it just times out. Any ideas?

There is already a thread (or two) on the PSC 1410:
Some people have had success here:
http://discussions.apple.com/thread.jspa?messageID=5987003&#5987003

Using AirPort Extreme Base Station as a network AP

I have a Netgear N900 wireless router and and an Airport Extreme Base Station.I used my N900 to create a high speed wirelss network. I would like to use my Extreme Base Station as an access point on this network, in order to get AirPlay and some extra ethernet ports in another part of the house. Is this possible to do, and if so how?
The "extend your current network" option from the Wireless Mode menu does not work. There is no "join your current network" option, like on the Airport Express. What am I missing?
Thank you in advance,
Alex

The Extreme *does not* let you joint an existing network
Yes it does. Please open up AirPort Utility 5.6, select the Extreme and click Manual Setup
Click the Wireless tab below the row of icons
Hold down the option key on your Mac while you click on the Wireless Mode selection box.
What happens? Now you see the "Join" selection.
Problem is, only the USB port is enabled if you configure the Extreme to "join".......as I already stated. The Ethernet ports are not enabled.
The AirPort Express 802.11n has a special feature that allows it to "join a wireless network" and the Ethernet port can be enabled.
The AirPort Extreme does not have this feature.....which might be the reason why Apple hides the "Join" setting for the Extreme.

Using Airport Extreme base station as wireless Cable router and airtunes.

Can I replace my wired Roadrunner cable modem with a Apple Airport Extreme wireless 56g router removing the wired modem out of the picture?
I just have read and have not come to the complete conclusion that the Airport extreme base station is a standalone wireless router.
I would like this if it is a wireless standalone router as I want to but a pair of wireless airtunes router for music around the house keeping the Airport Extreme in my room where the airtunes routers would not be as I have the computer in my room and I have iTunes right there and would not need the airtunes routers in my computer room.
Leon.

Can I replace my wired Roadrunner cable modem with a Apple Airport Extreme wireless 56g router removing the wired modem out of the picture?
The AirPort Extreme Base Station (AEBS) does NOT have a built-in DSL/Cable modem. You will still require a Cable modem in order to access your ISP's Internet service.
I just have read and have not come to the complete conclusion that the Airport extreme base station is a standalone wireless router.
The AEBS IS a wireless router, but it is NOT a combination wireless router & cable modem.

How do I get a VPN acct accessed using Airport Extreme Base station?

I have PC running Windows 2000. For my job, I access a hospital VPN at home. In my home, I am able to set up the Extreme Base Station for wireless conductivity with computers in my home and all have access internet wirelessly. No problem.
The problem is that I cant get it all to work together. How do I configure the base station to recognize/allow the VPN client to enter my network?
I currently have WEP 128 on. The computer used for VPN is hardwired to the base station. Even with security turn-off, I cant access the VPN via base station set up as it is.
help!
PC Windows 2000

I recently got my roommate's Lenovo t43p with VPN to finally work with my Airport Extreme.
1. Open the Airport Utility
2. Double click on your Airport Express on the left side to open up the panel.
3. Click on the "Internet" tab and then select the "DHCP" tab.
4. Click the "+" sign under "DHCP Reservations"
5. Create a name for the profile like "XP Work Laptop" or whatever, and then click Continue
6. You'll need to get your Windows laptop's MAC address which is sometimes under your laptop on a sticker, or you'll have to dig through XP's ridiculous Control Panel to find it.
7. Enter your laptop's MAC address in the field.
8. Lastly, in the 'IPv4 Address" field designate an IP address for your XP laptop that is within your router's range, if you're not sure of the range, the "IPv4 Address" range should be auto-populated with an IP address and you can just try it with that, or if it doesn't work you can change the last number to something higher but no more than like 4-5 digits more.
Hope this helps, Good luck!!

ANOTHER Airport Extreme base station dropping connections

I think my network connectivity problems predate the latest Airport software update by a few days.
Our MacBook Pro's randomly drop an Airport connection when they are near a secondary access point operated in Bridged Mode.
My one-year-old Airport Extreme/Time Capsule had been working fine in 2.4GHz b/g/n mode with a gigabit switch and a link to a Comcast cable modem, all set up in the northwest corner of the house. I decided to replace it with a new, dual-band Airport Extreme/Time Capsule so that we could separately operate a faster 5GHz "n" network for modern notebooks along with the 2.4GHZ b/g/n network for older notebooks and iPhones.
We substituted the new Airport Extreme/Time Capsule for the old model and it now serves IP addresses to 5GHZ network devices. The old Time Capsule was moved to a new location in the southeast corner of the house, connected to the network via Cat 6 Ethernet, and also set it up to join the same 5GHz wireless "n" network in Bridge Mode -- it is an access point, but not serving DHCP addresses.
Now, whenever a laptop is near that device, it accesses the LAN through that Airport Extreme's 5GHz WIFi connection. The problem is this: every few hours (though sometimes sooner - its random), our MacBook Pro's lose their network and Internet connections (not simultaneously though). This only happens if the laptops are physically closest to the older, Bridged wireless access point. It can happen in the middle of Web surfing and always, when they wake from sleep. It NEVER happens if the notebooks are physically closer to the new Airport Extreme (and hitting it's 5GHz signal) and the iPhones NEVER lose their Internet connection to the separate 2.4GHz b/g/n network.
When it does happen, we have to Restart the notebooks to re-establish an Internet connection, though I suppose restarting the Airport Extreme/Time Capsule also might re-establish the connection. Sometimes, I can just move my laptop back to the northwest corner where the main Airport Extreme/Time Capsule is located and get right back online through that access point. But usually, I just sit in the back room, restart and rejoin the network through the secondary, wireless access point. Turning off/on Airport (at the MacBooks) accomplishes nothing and neither does Network Diagnostics.
This affects two new, MacBook Pro "n" laptops running 10.5.8, but does not affect the iPhones. So, it only seems to be a 5GHz issue. I don't think it's RF interference because I've tried three different 5 GHz channels. I've also tried reducing the secondary Airport Extreme's transmission power to 50% and, more recently 25%, to no avail.
This morning, it started happening again, so I finally used the Airport Utility to turn off the Wireless Mode of the secondary device for my next test (thanks to the Ethernet connections, it's still visible on the wireless network). We'll see if this solves the wireless connectivity problem.
Does anyone have any idea what could be causing this? I wonder if it is some odd, configuration issue.

I just started having a similar problem in the last week. I have three devices: the Gigabit AEBS is connected to my cable modem and is the DHCP server. An Airport Express (N) extends the wireless network. A second (G-Only) Airport Express is connected to one of the gigabit ports on the AEBS and creates a second wireless network for iPhone, G-devices and guests.
Lately, the connection from my May 2009 MacBook Pro has started acting strange. The Airport icon in the menubar shows I have full signal strength, but I'm no longer connected to the Internet and I can't browse other N computers on the network. Devices that are connected via the G network continue working fine and remain connected to the Internet. This is interesting because even the G network has to go through the AEBS to get to the Internet. It only appears to affect the Internet connection via the AEBS's own WiFi but not its ethernet ports. If I open Airport Utility from the MacBook Pro, the AEBS status shows as Normal. Turning off/on the Airport on the MacBook accomplishes nothing but I can restart the AEBS from the Airport Utility and then everything goes back to normal. A few hours or more later, the problem occurs again.
By holding the Option key when clicking on the Airport icon and looking at the Airport MAC address I can tell that the MacBook Pro is connected to the WiFi-N via the Airport Express extender. Like you, I may have to try and shut that one off and see if the problems occurs when it is connected directly to the AEBS. The problem with that is that since it is farther away in the house, the signal strength and thus my transmit rate will be slower. I'd be curious to see if your experiment by shutting down your secondary AE will still cause drops.

Can't create a working Wireless Network using Airport Extreme Base Station

I don't know what I'm doing wrong...
I've got the cable from the modem going to the base station. I follow ALL on screen instructions. I select "Using DHCP" because when I plug the ethernet cable into my MBP it automatically does everything for me, and has that as its setting as well.
I get to the stage where it asks whether or not I'd like it to share an IP or go into bridge mode, I'm not sure what either of these two mean...I've tried both and both result in no wireless internet.
On several occasions I get to the end, and after I do the "final" update is comes back with one problem - internet connection, saying the router doesn't have a valid IP.
I'm totally lost on what to do here...
If you need more information just ask...please...

The below procedure is described in your AirPort setup manual, but it can be a little confusing. Here is my step-by-step procedure for an AEB setup for the system you describe:
A. Setup the 'Main' Base Station:
1. Do a factory reset of your AEB (main), then turnoff the DSL Modem and the AEB (main).
2. Check ethernet cable connections:
- DSL Modem > AEB (main) WAN port;
- AEB (main) > Mac computer running OS X 10.5.x.
3. Power-on DSL Modem and wait for it to initialise.
4. Power-on the AEB (main) and start your Mac computer.
5. Open AirPort Utility and select the AEB (main) in the LH pane. Click 'Continue' and give the AEB (main) a name and an admin password (twice). Click 'Continue'.
6. Select 'I don't have a wireless network and I want to create one', click Continue.
7. Give your network a name, select WPA/WPA2 Personal and insert the wireless network password (twice) - use 13 alpha/numeric characters for password. Tick 'Remember this password in my keychain'. Click 'Continue'.
8. Select 'I connect to the Internet with a DSL or cable modem using DHCP. Click 'Continue'.
9. Click 'Update' and wait for the AEB (main) to restart.
10. Disconnect the ethernet cable between your Mac and the AEB (main).
B. Setup Client computer
1. Open System Preferences/Network/AirPort.
2. Against 'Network Name:' select your network (the name you gave it at A7).
3. Click 'Advanced' and select TCP/IP. Against 'Configure IPv4:' select 'Using DHCP', then click 'OK'.
4. Click 'Apply' and exit System Preferences.

Airport Extreme Base Station to connect MacBook Pro to internet?

With a new MacBook Pro do I need an Airport Base station or something other purchase (product) to connect to the internet wirelessly while I travel?
Thank you very much in advance for your time in this matter.

Duane is correct.
The wireless is built in. Whoever you are connecting to will have a base station. If you want wireless at home you need a base station connected to your internet connection.
Good luck.

Using AirPort Extreme Base Station to Connect a Hard Drive

Similar Messages

Maybe you are looking for