Using both 1st and 2nd Generation Shuffle on the same computer

After owning a 1st Gen Shuffle for a number of years, today I decided to upgrade to a 2nd Gen.
What I would like to know is, can I use both shuffles on the same computer, through the same iTunes program, using the same music library?
There's nothing wrong with the 1st Gen unit, but I still want to use it as a back-up/secondary unit to the 2nd Gen one.
I have yet to connect the 2nd Gen unit to my computer. Before I do I would like to know whether or not I can use both the old and the new units. Also is there anything special I need to do to allow this to happen.
thank you.
Pentium 4 Dual   Windows XP  
Pentium 4 Dual   Windows XP  

Nothing special to do. Connect new iPod and let it sync. Make sure only one is connected at a time.

Similar Messages

  • Using a iPod and a iPod shuffle on the same computer

    I was given an iPod shuffle for Christmas and my son has a iPod. He has down loaded the iPod program on my laptop with his songs. If I down load my shuffle on to the same computer will it delete his program and songs or can I use his itunes for my shuffle? Any help would be appreciated.

    Hi. I've just added a shuffle to my iTunes for my wife's use. I have an existing mini. I have attempted to follow the advice you gave in answer to the previous message. I now have two differing playlists but I am unable to follow the steps shown in Method 2 where you use 'Sync music' & then 'Select playlist'. I cannot find these 2 in any of the iTunes menus or by right clicking. I have also referred to my original iPod Mini user guide & am unable to follow the advice in there either, where it says select iPod mini in the Source list. There is nowhere in my iTunes menus where it says 'Source list'. I would be grateful for some help. thanks

  • Can (2)1st & (2) 2nd gen shuffles be on same computer and same itunes

    I currently have 2 1st gen shuffles - other kids wanted ipods so i got them the 2nd gen shuffles. My concern is will the software for the 2nds' be compatable with the 1sts'. If not will it be possible to have two different versions of itunes installed on the same computer. I don't want to give up the 1st gen. One's mine and I gotta have my music!!!! I tried looking up the answer everywhere on Apples wonderful support site. No help, so I am asking you fine people out there who have purchased Apples products and then been left to wonder in the dark.
    dell pc   Windows XP  

    The current version of iTunes supports all currently available iPods; if you want to transfer different music to each iPod, see this article for information.
    (18480)

  • Can I use both Wifi and a Lan connection at the same time?

    With me back in the dorms I have been limited to a slower connection than what I would like. Now we are able to use both Wifi and a Lan line so I was wondering to somewhat "double" my speed if there was any way to use both connections at the same time.
    Now I know that you can have both plugged in at the same time, I guess what I'm asking is, is there a way that I could set programs to use one or the other? Or some kind of virtual desktop that is set to use the other connection or anything that would allow both be used at the same time.
    Or am I just wishing for something that doesn't have any possible way to work?
    -nathan
    MacBook pro 2.16 C2D 2gb ram   Mac OS X (10.4.8)  

    You can use both at the same time, but not gor Internet access if that's what you're asking.
    Now there is a thing called Link Aggregation, which combines a number of interfaces for speed/redundancy, but it really only works locally, and then only with ALL special equipment in the route, and most likely OSX Server involved.
    Sorry.

  • How to use both digital and analog input modules in the same worksheet - MCC USB1208LS

    Dear all,
    Hi, I am Imran. I am using MCC USB1208LS. I have created the worksheet using digital input module as below and able to execute (run).
    But when i add another analog input module in the same worksheet and executes, An error Message pops-up as in the below image
    I have connected temperature sensor sognal to the analog input of USB1208LS. When using analog input alone in the worksheet, it indiates the actual values. 
    is any black box solve? please guide me. I am attaching in images
    We already placed a purchase order for USB1208FS. Will it sort out my issues?.
    Thanking you,
    Imran Mohamed.
    Attachments:
    present worksheet digital input only.JPG ‏67 KB
    with analog input module.JPG ‏81 KB
    error menu.JPG ‏77 KB

    Hello Imran,
    the USB-1208LS is not capable of running concurrent operations such as an analog input scan and ANY digital Ins, Outs, counter reads, or analog outs.  In Dasylab, the 1208LS is scanning, and nothing else from that particular device can be requested of it while that is happening.
    Yes, using the 1208FS will resolve some of these issues.
    Please refer to the ULHELP.CHM file installed on your computer in c:\program files\measurement computing\daq for details on this issue, et al.
    also I recommend you send your MCC/DASYLab requests for support to [email protected] as MCC staff (that includes me) does not normally monitor NI's Developer Zone.

  • Using Both BW and R/3 Tables in the same report

    I am very new to Crystal and I have a requirement that involves data that is contained in both R/3 tables  and BW. Basically it is a series of report sections (17 total) with 14 being from R/3 tables and 3 coming from BW).  My first question is it even possible to combine two different data sources like that in Crystal? Second question is if it is is the best solution to create a master container report and add all of the sections as subreports. If so how do I link the BW and R/3 subreports together.?
    Thanks in advance for any help.
    Andy

    hey Andy,
    you can indeed combine data sources. you can even throw non SAP datasources in there as well.
    however, as a warning, when you combine and then link disparate datasources in this manner, you are going to have very reduced performance...this is because all of the applicable records from each data set have to come back into cr and this will take up a lot of time and memory.
    as you suggested, a subreport is best.
    you could have your main report run off of your R3 connection and a subreport run off of BW. if you have a common field, like an ID field, you can use subreport linking on this field from the main R3 report to the BW report.
    jw
    Edited by: Jamie Wiseman on Dec 16, 2009 4:13 PM

  • My iPods touch 1st and 2nd generation don´t show up anymore in iTunes after upgrade to iTunes 10.5 and MacOsX 10.6.8 Snow. What can I do??

    I was using iPods touch 1st and 2nd generation together with iPod Shuffle 1st generation with inferior versions of iTunes and MacOS X without any problem. After I upgraded to iTunes 10.5 and Mac OS X 10.6.8, the iPod Shuffle still appears in iTunes normally, but the iPods don´t appear. Its not a problem of the USB because because it happens with two different USB cables which worked just fine before. Any idea how I could get the iPods working again?? Thanks a lot!!!

    I have an iPod Touch 2nd Gen, MacOS X 10.6.8 and iTunes 10.5, and my iPod still works when I plug it in.
    So it's not the software, because mine still works. Do your iPods have a lock on them? If so, try unlocking them and then plugging them in, usually when your iPod has a passcode lock it won't show up in iTunes until you unlock it.

  • HT202157 What is the difference between the 1st and 2nd generation Apple TV?

    What is the main difference between the 1st and 2nd generation Apple TV's? I just got the 1st generation and was wondering if I should send back for the 2nd gen?

    There is one other difference. The ATV3 uses a new processor with a better graphic processing unit.  If you only had the ATV2 for less than 14 day. Why not upgrade. 1080p video will be a little sharper, but in reality most people won't notice any real difference. It's likely that Apple will stop supporting the ATV 1st gen and 2nd gen in couple of years. Apple as a company usually only supports hardware 5-6yrs max! 

  • Parts of the 1st and 2nd generation ipod nano's?

    I have a question. Does anyone know if the parts of the 1st and 2nd generation nanos are compatable with each other or are they different.

    no they dont work together

  • I have a ipod nano 1st and 2nd generation and am trying to put music on it but every time windows says one of the usb devices attached to this computer has malufunctioned and windows does not recognize it code 43 can someone help me please

    i have a ipod nano 1st and 2nd generation and am trying to put music on it but every time windows says one of the usb devices attached to this computer has malufunctioned and windows does not recognize it code 43 can someone help me please

    Try putting it into "Disk Mode" http://docs.info.apple.com/article.html?artnum=93651
    Then with it in this mode connect it to the PC and try to run the latest iPod updater to do a restore and update software if you have the option. the latest iPod updater is 2006-03-23 and can be downloaded here http://www.apple.com/ipod/download/

  • How do I share an iMovie file for use on 1st or 2nd generation Apple TV

    How do I share an finished imovie file for use on 1st or 2nd generation apple TV?

    I shared my finished movie in I Tunes but it doesnt show up on my Gen 1 apple tv or my gen 2 Apple TV. The sharing process indicates that the movie is compatable with gen 3 Apple TV.
    Carl

  • Can I use a USB for 2nd generation shuffle with a 3rd generation shuffle

    Can I use a USB for 2nd generation shuffle with a 3rd generation shuffle?
    Seems to be a good fit, but my computer doesn't seem to recognise it.

    GreenApple5315 wrote:
    Can you use a 3rd gen charger with a 2nd gen Shuffle?
    By "3rd gen charger" are you referring to the USB cable with the
    4 ring audio connector on the other end?
    If so, the answer is again NO...

  • What is the difference between 1st and 2nd generation of the Itouch?

    Can someone tell me the difference between the 1st and 2nd generation of the itouch? I'm looking to upgrade from my nano to a 32gb Itouch.

    The speaker is a big plus. Who wants to dig up their headphones just to play a quick game of Lux Touch or play with your light sabre without anyone else hearing the sound effects :)? The lack of a volume control is also a major complaint of IPT 1G users. The only thing that should swing you back to the 1G is the iPod accessories you already have that may be rendered obsolete.

  • Can iCal use both English and French languages or does the System software need to be either French or English?

    Can iCal use both English and French languages or does the System software need to be either French or English?

    joanfromardon wrote:
    Can iCal use both English and French languages or does the System software need to be either French or English?
    The calendar language is determined by system prefs/language & text/formats.
    The app language is determined by system prefs/language & text/language, or you can probably use
    http://www.tj-hd.co.uk/en-gb/languageswitcher/

  • How do I get the Time Capsule to run both 5GHz and 2.4GHz networks at the same time.

    How do I get the Time Capsule to run both 5GHz and 2.4GHz networks at the same time.

    Thanks for digging out the facts.
    You have a 1st Generation Time Capsule.
    Your model can produce two bands....either 2.4 GHz or 5 GHz....but not both simultaneously.
    You would need a Generation 2, 3 or 4 Time Capsule for simultaneous dual band capability.

Maybe you are looking for

  • To hide Services for Object in Purchase Order screen

    Dear Experts, Is it possible for me to control Services for object to a group of user only in ECC 6.0 ? or How to hide the icon for unauthorized users ? Thanks in advance. Moktar

  • Output Space Delimited Content to File

    I need to output the contents of a query into a text file with columns of various widths on 4 different rows. For example on row 1 the column widths might be 5, 10 , 2 , 10 , etc. On line 2 it's 4,11,16,5, etc. I need to format the output so that it

  • Lightroom Profiles for Lumix GX7?

    I'm trying out various programs for RAW processing using my new Lumix GX7. I quite like DXO Optics Pro 9 due to the camera and lens profiles for my equipment. However, it has limited functionality compared to Lightroom 5.6 which I'm also trying. I no

  • LED push button

    Hi, Need help in resolving below given 2 issues: 1. I have a string Combo box(dropdown) having options A,B,C &D. But i need to make these options as  LED push buttons. Is there a way to make a boolean to pass a string value? When pressed A, it should

  • Adobe AcroPro Trail in XP-SP3

    I have a new operating system (WinXP-SP3) and can't seem to get LiveCycle to work. Acro works fine, but I want to try creating a simple fill-out form. It doesn't matter if I open LCD via Adobe AcroPro or open it directly via the link in my program li