Using brochure template, the second side prints upside down.  How to fix?

When using the brochure template how does one correct the back page from printing upside down?

Hi,
From the application used to print open the printer dialog, then click on ettings or Preferences to access to Printig Preferences dialog.
Within the Layout tab change the Print on both sides option.
For a portrait oriented document select Flip on Long Edge, for a Landscape one select Flip on Short Edge, then it will print as expected.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • Two sided printing, the second side prints upside down, what have it done

    I know that a setting has been changed, I just can't remember what I did.
    When using the two sided printing the orientiation of the back side is upside down.  What have I done? and how can I fix it?  Help?
    This question was solved.
    View Solution.

    Hi,
    From the application used to print open the printer dialog, then click on ettings or Preferences to access to Printig Preferences dialog.
    Within the Layout tab change the Print on both sides option.
    For a portrait oriented document select Flip on Long Edge, for a Landscape one select Flip on Short Edge, then it will print as expected.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • I have a LaserJet Pro P1606dn - the second page prints upside down when using the duplex print optio

    Operating system Windows 7 32 bit.  I have re-installed the printer an I have downloaded and applied the most recent drivers from the HP site.  The built in set-up shows the settings correctly as duplex on and bind on the long edge but the second page continues to print upside down i.e. it seems to always print as binding on the top edge.
    However when I print from my iPad via Airprint the duplex print works perfectly!

    IF you are using a printer with 2-sided printing, in the expanded print dialog you will have a selection for long-edge binding OR short-edge binding. Whichever setting you have set, switch to the other one.
    Walt

  • Using pages to create a two-sided brochure and second page prints upside down!

    When using a pages template to create a two-sided brochure, the second page needs to be reversed (upside down) for correct printing when emailing to an outside printer sources.  How do I reverse the page within the pages app?

    IF you are using a printer with 2-sided printing, in the expanded print dialog you will have a selection for long-edge binding OR short-edge binding. Whichever setting you have set, switch to the other one.
    Walt

  • When NOT using icons on the toolbar, side-bar drop-down for additional toolbar items has disappeared with Firefox 4 and accessing these items requires clicking 'Bookmarks', then 'Show all bookmarks' then 'Toolbar'--ugh, what a pain.

    On older versions of Firefox, Toolbar links ran across the top of my screen, with a drop-down to the far right which would show additional Toolbar items for which there was not room on the screen.
    With Firefox 4, if I'm not using icons (text only), the dedicated Toolbar drop-down is gone and I have to first click 'Bookmarks' to the right of the Toolbar ribbon, then 'Show All Bookmarks', then 'Toolbar' in order to access my additional Toolbar links. Could anyone have made it any harder?
    Why doesn't someone just restore the drop-down at the far right of the Toolbar so that all of my Toolbar items (which I prefer to keep separately from the regular Bookmark items, else I would have just plain bookmarked those items in the first place) are readily accessible?

    You see the orange (on Linux gray) Firefox button if the Menu Bar is hidden (View > Toolbars > Customize or right-click a toolbar).<br />
    If you need to access the hidden Menu bar then press F10 or hold down the Alt key to make the Menu Bar appear temporarily.<br />
    You only see the Bookmarks menu button if the Menu bar is hidden.

  • There is a blue/black/mostly white band on the right side of my screen, how to fix

    Wondering why this band suddenly appeared and how to get rid of it

    As it could possibly be a hardware/graphics subsystem problem or the display itself (e.g. flex cable connection), you had best have it physically examined by an authorized service center or a Genius Bar Tech at an Apple Store. Software generally doesn't produce such symptoms if it also visible during an independent boot to a recovery disc or partition.

  • How do I set up pages to print a 5x7 catalog using doubled sided printing. When I try this layout the inside pages are upside down?

    I am trying to print a 5 x7 catalog. When I print it out using doubled sided the inside pages are upside down. Is there a way to setup and print using a 5x7 format?

    If your printer does duplex printing (i.e. you're not re-feeding the pages manually), there may be a setting in the print dialog. My Brother color laser has these option when I check the two-sided box. If you see something similar, test the various options & make a note of what works. It took me so many tries to figure out what they meant by long- or short-edge binding!
    If you're using something like CocoaBooklet or another program to create a booklet, see if it has an option to turn the second side upside down.

  • Printing upside down

    Hi guys.  I've got an HP LaserJet 600 M603.  It has started printing pages with the data upside down.  Instead of picking the page up from the tray after printing, and the start of the page being at the top, it's placing the start of the page and information at the bottom, upside-down.
    When I do a factory reset, it will correct the issue for a time, but it then reverts back within an hour or so.
    I researched and found some information regarding a firmware upgrade for a different model printer that stated is was the PJL Density command that was causing the data on the page to print upside-down and it was the fix for it.
    Not sure if an upgrade to the firmware is what I need, nor do I know how to peform this.  Any advice?
    Firmware Revision: 2200643_228341
    Firmware Date Code: 20120623
    Model: CE996A
    This question was solved.
    View Solution.

    There is a firmware update from 31 July 2014, version 2302963_436082 available for download from HP here.  Be sure to read the "Readme" file in the file here for installation instructions.  The installation instructions are near the end, starting about page 29.  It does appear some of the updates involved fixes for mirrored or inverted text.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Trifold brochure printing Lexmark back side is upside down.

    Trying to print a trifold brochure using Pages and a Lexmark Pro705.  The back side is printing upside down using the auto 2 side function.  Can't figure out how to get the second page to print properly for the trifold to fold correctly.

    2 sided functions are set up for portrait pages not landscape.
    To counter what the Lexmark is doing, you will have to rotate everything on the second side 180° or do the printing manually and rotate the one sided sheets to suit in a second pass.
    Peter

  • How Can I Restart Two-Sided Printing On the Second Side?

    I printed a PDF document in two-sided mode.  I apparently waited too long after printing the first side because when I clicked on "Continue", nothing happened and the printer just said "Ready".  How can I restart this print job so that only the second side of each sheet is printed?

    Asssuming you are using Adobe reader you would go to "Print Range" and in the "subset" box select to only print the even (or odd, depending on which have already printed) pages .  You may or may not need to check the "reverse pages" box depending on which page is on top in the paper tray - if it is the first of second page then do not reverse pages.
    Regards,
    Bob Headrick, Microsoft MVP Printing/Imaging
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Unable to use RAS SDK for server-side printing for XI 3.1

    Hi all,
    I am using RAS SDK for server-side printing.  Here are my codes:
    ISessionMgr sessionMgr = CrystalEnterprise.getSessionMgr();
    IEnterpriseSession enterpriseSession = sessionMgr.logon("Administrator", "", "cdi5boe", "secEnterprise");
    IInfoStore iStore = (IInfoStore) enterpriseSession.getService("InfoStore");
    //out.println("Current User is = " + enterpriseSession.getUserInfo().getUserName());
    //out.println ("<br>");
    IInfoObjects infoObjects = iStore.query("SELECT * FROM CI_INFOOBJECTS WHERE SI_Kind='CrystalReport' AND SI_NAME = 'Sales Print'");
    IInfoObject infoObject = (IInfoObject)infoObjects.get(0);    
    IReportAppFactory reportAppFactory = (IReportAppFactory) enterpriseSession.getService("RASReportFactory");
    ReportClientDocument rcd = new ReportClientDocument();
    rcd = reportAppFactory.openDocument(infoObject,0, java.util.Locale.US);
    //Create print options to use when printing.
    PrintReportOptions printOptions = new PrintReportOptions();
    printOptions.setPrinterName("
    cdi5boe
    HPLaserJ");
    printOptions.setJobTitle("Test Printer Job");
    printOptions.setPrinterDuplex(PrinterDuplex.horizontal);
    printOptions.setPaperSource(PaperSource.auto);
    printOptions.setPaperSize(PaperSize.paperLetter);
    printOptions.setNumberOfCopies(1);
    printOptions.setCollated(false);
    PrintReportOptions.PageRange printPageRange = new PrintReportOptions.PageRange(1,1);
    printOptions.addPrinterPageRange(printPageRange);
    //Print report.
    rcd.getPrintOutputController().printReport(printOptions);
    When I run the report, I got the following errors:
    com.crystaldecisions.sdk.occa.report.lib.ReportSDKPrinterException: com.businessobjects.crystalreports.printer.bean.ReportPrinter---- Error code:-2147215357 Error code name:internal
    I consult the Diamond Technical Community and I found the issue related to printer name:
    https://boc.sdn.sap.com/node/498
    However, I did check the printer name, it is accessible via Windows Explorer.
    Anyone knows how to resolve this?
    Regards,
    Derek

    It doesn't appear to be listed as a dependency in the developer docs, but would you try putting the ReportPrinter.jar in your RAS app?
    Sincerely,
    Ted Ueda

  • Shifting from the second page printed

    hi,
    I create a report with reports10g .
    the size of the output paper is 15.2 * 21 cm. the papers used are continuous paper with matrix printer .
    I have a problem shifting from the second page printed.
    how to solve this problem?
    thank you in advance

    Hey Tom - sorry I failed to mention I did try powering off and on, and then the reset as you suggested.  It still does the same thing.

  • Anybody here have try the double-side printing?

    It doesn't work when I try to do the double-side printing. And in the schedule info, it is Single-side --!!. Of course our printer support the double-side printing.So,any idea about this?
    And I add the filter to transform the pdf to ps,is this the possible reason that the tray selection and double-side printing do not work?

    To print on both sides (Duplex Mode), you have to
    1.Have a Postscript ready printer.
    2.Install Pasta
    3.Install and Setup third party software like xpdf or Ghostscript to convert the PDF to PS file
    4.Setup Printer Style and Pasta Config file
    a.Define custom print style like 'Duplex PDF Publisher'
    b. Assign this print style to Printer Type with with standard PASTA driver 'PASTA_PDF'
    c.Then query printer driver 'PASTA_PDF' and on the arguments field, enter following -pn$PROFILES$.PRINTER -f$PROFILES$.FILENAME -c$PROFILES$.CONC_COPIES -Fpasta_pdf.cfg
    d. Verify that the file $FND_TOP/resource/pasta_pdf.cfg is present and that it contains only one "uncommented" entry corresponding to the installed third party tool, as follows:
    preprocess=pdftops -duplex {infile} {outfile}
    pdf2ps (Ghostscript) by itself does not support the duplex option. You will need to use XPDF software (pdftops).

  • Using TCP on the second ethernet interface

    Hello,
    I'm using a PXI 8109 running Pharlap.
    I'm trying to use the second ethernet interface of my PXI to send UDP and TCP packets. The primary interface is used to manage Veristand Channels.
    Here is the configuration of my two ethernet interfaces: 
    - eth0 (primary):
    IP : 10.0.0.3
    subnet mask : 255.0.0.0
    - eth1 :
    IP : 192.168.10.9
    subnet mask : 255.255.255.0
    For UDP, I have no problems, packets are sent to the second interface as I want. I think it work because there is a "network address" input on the "UDP Open" VI so the system can choose the right interface.
    For TCP, I use the "TCP Open a connection" VI but there is no this kind of input. And it is not working : I assume the system is trying to use the primary interface but it can't route packets... 
    For information, my two networks are physically independant.
    Can you help me finding out what's going on ? Is it possible to use TCP on the second ethernet interface ? 
    Many thanks,
    Regards,
    Laurent
    Solved!
    Go to Solution.

    Sorry but i don't understand your Input problem!!!
    Could you give me more details?
    The link below can maybe be help you:
    http://digital.ni.com/public.nsf/allkb/67F94BB93BCE32CF86257367006B3659?OpenDocument
    Best regards
    Aurélien Corbin
    National Instruments France
    #adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
    Cahiers de vacances de NI
    Présentations en ligne : 12 fondamentaux à réviser, du 9 juillet au 29 aoû...

  • When using headphones, only the left side works, HELP?

    When using headphones, only the left side works when plugged into the macbook. I've tried 3 different working pairs of headphones and different media types and nothing seems to fix it. HELP?

    Hi atgoetz,
    Usually this is indicative of a bad headphone jack on the machine end, especially if you've tried three different pairs of known good headphones. Unfortunately there's not much you do to resolve the issue, externally. Considering it's a new machine no sense trying to fix something and making it work. I'd reach out to AppleCare for service on the unit and if it's brand new, possibly arrange a replacement unit.

Maybe you are looking for