Using converter/adapter with macbook extension cord'

I'm taking my macbook to the u.k. and want to know if i can use just an adapter with the magsafe extension cord. I already have an adapter for the the magsafe cord but may need to use the extension cord as well.

Yes you can just use a plug adapter. It will work fine either way.

Similar Messages

  • How to use File Adapter with hierarchial Structure?

    Hi,
    How to use File Adapter with hierarchial Structure like..
    Data:
    --Header Details:
    Line Item Details:
    Data
    Bcoz I am getting a Flatfile in a hierarchial way as shown below.
    Header Details :1
    Line Item a
    Line Item b
    Header Details :2
    Line Item c
    Line Item d
    Kishore

    Hey Kishore,
    In order to create a structure you need to use the file with convertion mode on the sending communication channel of the file adapter.
    check the link for the needed configuration paramters.
    If the structure is more complexed you can use the Contetnt master(CM) from itemfield which allows to ceate XML file from complex flat files and more.
    <a href="http://help.sap.com/saphelp_erp2005/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm">File sender adapter</a>
    If you have any question i'll be more than happy to assist.
    Nimrod Gisis

  • I have just used air display with macbook pro. i have disconnected now from apple tv. but my laptop screen is still very small like its connected to the tv. this means all the tabs and writing is very small, how do i full disconnect my laptop?

    i have just used air display with macbook pro. i have disconnected now from apple tv. but my laptop screen is still very small like its connected to the tv. this means all the tabs and writing is very small. like the display down the bottom where al the applications are, is n the middle of the page and not spread down the bottom. this is seriously annoying! all the writing is every small and the tabs are small and its hard to read.  the air display link has disappeared from my computer. but the laptop screen is still very small. i want to know how do i get rid of this and return my macbook screen to its normal size. thank you

    Hello chrispyw,
    If your content is still being displayed incorrectly, I would check the resolution setting for the built in display with this article:
    OS X Yosemite: Adjust your display’s resolution
    If it keeps happening whenever you use AirPlay then I would use this section of the following article to reset the display system:
    Apple computers: Troubleshooting issues with video on internal or external displays
    Reset the system
    You can reset the Mac's parameter RAM and SMC.Reset the resolution
    Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
    Start up in Safe Mode.
    From the Apple () menu, choose System Preferences.
    Choose Displays from the View menu to open the preferences pane.
    Select any resolution and refresh rate that your display supports.
    Restart your computer.
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • Problem with Send using JMS Adapter with Websphere MQ

    Hi,
    We have two scenarios using JMS Adapter with MQ:
    1. File->PI->MQ
    This works fine and drop the file in MQ correctly.
    2. MQ->PI->File
    This gives an error reading from the queue: (see highlighted in the log below). It correctly connects to the queue name. But it fails with the message "Could not begin a AF transaction".
    Our PI version is 7.0 SP 13
    Websphere MQ Version 6.0.
    Any idea what could be wrong?
      Cluster Node  Administration Information  Availability Times
    Cluster Node Details for Channel CC_JMS_MQ_Sender
    Short Log 
    In the Last 4 Hours Server 0 15_92786
    _Sucessfully connected to destination 'queue:///MMPP.PLM.FGH41? CCSID=37&targetClient=1'_
       Line 1 / 1
    Processing Details for Cluster Node Server 0 15_92786
    Type 
    Time Stamp 
    Message ID 
    Explanation 
    9/2/08 2:27:28 PM 2e6206f0-7925-11dd-bc02-0003bae50b4d Error while processing message '2e6206f0-7925-11dd-bc02-0003bae50b4d';  _detailed error description: com.sap.aii.adapter.jms.api.channel.filter.MessageFilterException: Could not begin a AF transaction: TxManagerException: Unable to open transaction: com.sap.engine.services.ts.exceptions.BaseSystemException at com.sap.aii.adapter.jms.core.channel.filter.TxManagerFilter.filterSend(TxManagerFilter.java:103) ..._  
    9/2/08 2:27:28 PM 2e6206f0-7925-11dd-bc02-0003bae50b4d XI message ID corresponding to JMS message with ID 'ID:414d512071736431202020202020202047d9462024028b02' will be created as a new GUID with value '2e6206f0-7925-11dd-bc02-0003bae50b4d'
    Amith Dharmasiri

    Checked the drivers installed in :
    /usr/sap/<SID>/DVEBMGS<SYSNO>
    /j2ee/cluster/server0/bin/ext/com.sap
    .aii.af.jmsproviderlib
    They are available and properly added to aii_af_jmsproviderlib.sda.
    The drivers are:
    CL3Export.jar
    CL3Nonexport.jar
    com.ibm.mq.jar
    com.ibm.mqjms.jar
    connector.jar
    dhbcore.jar
    rmm.jar
    These were installed per OSS note 747601.
    Any other suggestions, why retrieving from MQ doesn't work?

  • HT3986 when i use windows 7 with macbook pro ,the fan work hardly,how do i fix it?

    when i use windows 7 with macbook pro ,the fan work hardly,how do i fix it?

    Use InputRemapper
    This is one or only utility I know, there are I am sure one or two others.
    And the weakest link in running Windows on Mac: lack of thermal/SMC fan control to manage air flow and heat!

  • Does voltage output matter when using an adapter with the macbook???????

    i have a generic ac adapter modified with a magsafe plug it works fine on macbook pro i tested it
    it is 18.5 volts output 85watts
    will it work ok on macbook???

    i know that info im trying to find out if using an 18.5 volt universal adapter with a magsafe plug thats 85 watts will it work on a macbook
    will the 18.5 volt be too much.....and the 85 watts be ok
    note: this is not an apple adapter its a generic one with a magsage plug on it
    please dont tell me what is recommended tell me if it will work or not
    recommndations are just money making lies from manufacturers to make money

  • Can I use iphone earbuds with a mac pro tower? And with an extension cord?

    I also need to use an extension cable because of my standing desk (tower is on the floor). I get confused with the 2-band jack, the 3-band jack, etc. I haven't been successful using a regular, radio shack type of headphone extension cord. Salesmen give me a blank stare when I try to explain that I have iphone earbuds with a 3-band jack and that it doesn't work with a regular extension cord. It's like I'm speaking Swahili.

    You can't using 4-band iPhone earphone with Mac Pro.
    You need to get 3-band earphone and extension cable.
    I've been using iPod shuffle's earphone with extension cable osn it works well.
    http://www.amazon.com/iMBAPrice-iMBA-PS-12MF-12-Feet-Plated-Extension/dp/B009UEB UZQ/ref=sr_1_5?s=electronics&ie=UTF8&qid=1382758521&sr=1-5

  • IPod USB adapter & PowerBook AC extension cord

    I just bought an iPod USB adapter and see that it has the same sort of removeable "duck head" AC plug as the power adapter for my G4 PowerBook. Does this mean that I can use the PowerBook's 3-prong "extension" cord with the iPod adapter?
    2GHz G5 iMac 20-in.   Mac OS X (10.4.4)   1.5 GHz G4 PowerBook 15-in.

    I figured this out myself.

  • Using Firewire Adapter With iPod Classic 80gb

    I have an iPod Classic, 80GB. I have a car adapter that uses a firewire cord. The firewire plugs into the lighter and then the other end plugs into the iPod. Can I use the firewire even though the iPod came with the usb cord? Just wondering as the wall plug adapter that i have has the firewire slot, too.

    The firewire plugs into the lighter and then the other end plugs into the iPod.
    I'm not sure what you mean by that. No firewire cable I've ever seen plugs into the car's cigarette lighter socket.
    What exactly are you trying to do? If you are simply trying to charge the iPod via the lighter socket, then a firewire connection has nothing to do with it.

  • Using Apple remote with macbook display closed

    Hi ,
    I have a macbook connected to LCD TV with HDMI connection .
    Is there a way to use Apple remote with display closed .
    examples of using apple remote with display closed would be
    (1) waking the macbook with apple remote
    (2) putting the macbook to sleep with apple remote
    (3) Shutting down the macbook with apple remote
    (4) accessing front row (using LCD TV as Display )
    while doing this should I connect the macbook to power source.
    please point me to any documentation / solutions available .
    I don't have any external keyboard or mouse connected to macbook . I just want to use Apple remote to do the above functions .
    Thanks
    Suresh
    macbook   Mac OS X (10.4.9)  

    Hi suresh,
    as mentioned here:
    http://docs.info.apple.com/article.html?artnum=86286
    and
    http://docs.info.apple.com/article.html?artnum=300562
    you must have to have a keyboard or mouse to trigger the macbook wake up from sleep when you close the lid.
    usb mouse is not that expensive and you can start with that.
    Good Luck

  • RE: Rollback while using DB Adapter with toplink

    Hi All,
    I am using DB Adapter's Toplink to insert data in ms-sql table.
    In case, If I am inserting 10 records and suppose after 6 record insertion is being failed.
    Then in above scenario, Is previously inserted records would be roll backed or not?
    Is there any thing, we need to do in BPEL or this would be taken care by Top link.
    My version of BPEL: 10.1.3.4.0
    Thanks in advance.
    Regards

    Hi Pavan,
    Thanks for your response. My process is Asysc. I did one poc, tested if a data of one record is wrong, then it throwing error, and data is not being inserted in data base.
    I tested with 4 records, if data of any records is wrong, then it is not being inserted.
    Is there any other good way to handle this.
    Regards
    Edited by: vikky123 on Sep 22, 2010 8:43 PM

  • Using HTTP adapter with no namespaces

    Hi,
    Is there anyway to use HTTP adapter when the provider does not accept the namespaces. The HTTP binding wizard requires a targetnamespace to be defined in the request and response xsds that we have to use.
    Thanks & Regards
    Siva

    Bernd we are trying to do the same thing only with the soap adapter.  I'm convinced that no one really knows how to do it.  We can't even find an SAP CONSULTANT that has done it .. at any cost!
    If you hear anything good .. please let me know - my email is [email protected]
    I think the nightmare is coming in because when SAP bought the j2ee ( application server ) they never really have integrated it so it's very confusing if the settings need to be done on the ABAP side or the J2EE side via visual administrator.  In addition most Basis guys are only experienced in the ABAP side and not the J2EE.

  • Using JMS adapter with J2ee native queuing system

    Hi there,
    As far as I have understood J2EE contains it's own native queuing system (JMS). Since the J2EE is part of the WAS, shouldn't it be possible to somehow use XI's JMS adapter in conjunction with this native JMS?
    I've tried to search many places in many ways, but haven't been able to find any info. Is it possible at all?
    Hope, some of u guys can help out there:-)
    Regards,
    Daniel

    Hi Keith,
    It looks as if you are in the same situation.
    We have this working very nicely now and I'm happy to share. In fact I was just granted wiki permissions so I can add the information there along with screen shots.
    Informaiton on this configuration is very scattered but I imagine many people would find it useful for integrating with Mainframes without adding any complexity to the legacy environment. Let me come back to you with some more inormation, but for now you can get started with this:
    Insert a module as the 3rd line in your Module Processing Sequence to use AF_Modules/MessageTransformBean and give it a key in order to associate with the parameters you will need to type in below. These parameters are very similar to normal XI File adapter parameters.
    SAP Note 793922 has more info on the parameters... not the greatest reference I know.
    Also this has some info...
    http://help.sap.com/saphelp_nw04/Helpdata/EN/57/0b2c4142aef623e10000000a155106/content.htm
    I'll try and get some screen shots up on the Wiki.

  • Using DB Adapter with XMLDB and CLOB

    Hi,
    with oracle xmldb i can store XMLs in lob or structured storage (s. Oracle® XML DB Developer's Guide 10g Release 2 (10.2) B14259-02).
    Now my question:
    If want to use a database adapter in the ESB to wake up several BPELs. Is there a functionality how i can transform such a clob into a XML where i can use XSLTs?
    The db adapter does only map each column to one xml-tag...
    If i try to use a table with xmltype the creation of a database adapter fails with:
    "some tables contain columns that are not recognized by the database adapter, so they will captured as strings:
    sys_nc_rowinfo$(sys.xmltype)
    change teh type of the above columns to that of the closest supported type...."
    Message was edited by:
    HEWizard

    Hi,
    To get it working you have to create an AQ-table with payload type xmltype. The xmltype payload data type is available on rdbms 10g and up. If you are on 9i or lower use raw data type. Create a queue inside the AQ-table. I'm not quite sure what's the best scenario for you to the queue with data, but I would imagine that you could create a database trigger on the table you're talking about and enqueue the xml-data (payload) to the AQ-table. Thus using the AQ-table as a staging table for the ESB system.
    Next, create an ESB system using an AQAdapter to dequeue the queue (like you did using a DBAdapter). The adapter can handle both single-user and multi-consumer queue's and all data types (raw, xmltype and object types).
    Messages are dequeued generally within a second after you commited the transaction.
    Kind regards,
    H

  • Using File Adapter with Logical Name

    I am creating a file adapter with Logical name. Apart from giving the Logical name is there any other configuration that I am suppose to do on the Web Logic before I start using it?
    Thanks in Advance.

    After configuring the file adapter, all you need to do is , give the path as a value for the logical name which you have created earlier. That you can do on the file adapter property inspector. There is no need to do anything on the server level. Lemme know
    Thanks,
    N

Maybe you are looking for

  • Unable to capture the value

    Hi, the 2 items are like <af:inputText label="User" binding="#{backingBeanScope.backing_Login4.it1}" id="it1"/> <af:inputText label="Password" binding="#{backingBeanScope.backing_Login4.it2}" id="it2" secret="true"/> why can't I capture their values

  • Hard Drive Accidental Format NTFS to OSX Extended Journaled

    Ok so here is what happened. I had 2 external HDD's connected to my MBP I wanted to format one and copy data from the other to it. The one with the Data on it was an NTFS Drive. The one I wanted to copy data to was also NTFS. My intention was to form

  • N93 and TV-out

    Does anybody know if it is possible to use the TV-out function with a slide show and to do a remote update (on the slide show) at the same time? The first question should perhaps be: Is it possible to (remote)control the phone over the 3G net?

  • I'm trying to download Premier pro and I'm getting an error message saying "There is no application set to open the url aam://SAPCode=PPRO?

    I'm trying to download Premier pro and I'm getting an error message saying "There is no application set to open the url aam://SAPCode=PPRO?  Does anyone know how to resolve this issue?

  • Wsus wants to download old versions already installed

    hello! I have done a package for the clients with the update Flash Player 11.0.0.77. The clients have sucessfully downloaded and installed. The problem is that Windows Update finds in that clients an old package with the version Flash Player 11.0.0.7