Using CTRL + F not working to find any text within the query result
Hi friends,
I am trying to use find option to find any text within the result section of a query but when I do CTRL+F the find window appears and I can input the text that I wanted. But when I press Enter it is not giving me any result though the entered text
is in the query result. I am using Sql Server 2012 Management studio. Any Body please help me. There is a job that I have to search certain things after running a script and now I am doing copy paste to excel and doing searching from there.
Prashant,
Looks like you are trying to do in SSMS, and it is because the result set is in Grid view , if you want to use CTL + F then your result should be in Text format, try to do using CTL + T ( To get result in Text) and then use CTL + F to find any
text.
Thanks
Manish
Please click Mark as Answer if my post solved your problem and click
Vote as Helpful if this post was useful.
Similar Messages
-
My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.
hi
could you tell us what the other app is please -
I have just upgraded to the latest version of OSX as invited by Apple. Since then iTunes will not play and my volume controls have stopped working - in Preferences the sound controller is not able to find any input or output devices. What is going on?
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
There will be no audio output in safe mode. The question to be answered by the test is whether any devices are listed in the Sound preference pane. After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
I am using iphone4 and recently updated to 7.0.4 from then onwards having issues with phone book. It will open but not able to scrool up and down and all options are not working. Is any one facing same issues?
Why apple also doing such kind of softwares? Cant they do testing before releasing the product?
Could any one help me out of this?
Thanks,
RajeshSee this discussion...
https://discussions.apple.com/message/23731048#23731048 -
I have not been able to find any information re: the Flashback virus on the Apple website. Has Apple put out anything on this?
The ‘Flashback Trojan’:
A version of an existing Trojan Horse posing as a legitimate Flash Player installer (named “Flashback.A” by a security firm) is designed to disable updates to the default Mac OS X anti-malware protection system, potentially leaving the system open to the manual installation of other malware without any system warnings. The most recent versions bypass any user action and automatically installs itself after an affected website is visited.
http://www.appleinsider.com/articles/11/10/19/fake_adobe_flash_malware_seeks_to_ disable_mac_os_x_anti_malware_protection.html
(Adobe is aware of malware posing as its Flash Player and warns users to ignore any updates that didn't originate on its own servers. "Do not download Flash Player from a site other than adobe.com," said David Lenoe, Adobe's product security program manager, in an entry on Adobe Product Security Incident Response Team's PSIRT blog. "This goes for any piece of software (Reader, Windows Media Player, QuickTime, etc). If you get a notice to update, it's not a bad idea to go directly to the site of the software vendor and download the update directly from the source. If the download is from an unfamiliar URL or an IP address, you should be suspicious.")
Flashback Trojan - Prevention of infection:
In order to prevent a potential infection with “Flashback” Trojans, Mac users should always obtain their copy of Adobe Flash Player directly from Adobe’s official website and to disable the "Open 'safe' files after downloading" option in Safari Preferences/General to avoid automatically running files downloaded from the Internet. Also, do not turn on Java in Safari Preferences/Security. Few websites use Java. Javascript is something entirely different and should be left active.
The Flashback Trojan does not affect PPC (non-Intel) Macs, nor has it been noted to affect users running Tiger OS 10.4.11 or Leopard OS 10.5.8.
Last, but by no means least, using Open DNS is the simplest way of preventing infection in the first place. Open DNS also protects against phishing attacks, re-directs, speeds up your internet connection, and works for all users of OS X from Tiger upwards:
http://blog.opendns.com/2012/04/09/worried-about-mac-malware-just-set-up-opendns /
How to get it:
https://store.opendns.com/get/home-free
Flashback Trojan - Detection and Removal
Users with Intel Macs running Snow Leopard OS 10.6 or Lion OS 10.7 should ensure that they have downloaded all the recent Java updates from Apple, which are designed to prevent infection and also remove any infection already present.
New Macs running Lion do not have either Flash Player nor Java installed. If you running Lion and have not already downloaded and installed Java, you should download the ‘Flashback malware removal tool’ from Apple: http://support.apple.com/kb/HT5246 (356KB) which includes the same code as the Java update that plugged a security hole which allowed the malware to automatically install itself without admin authorization.
You can also use this to check whether you have been infected (for Intel Macs only) and remove it if required:
http://www.macupdate.com/app/mac/42571/anti-flashback-trojan
Flashback Trojan - Detection, and how to remove (with caution) if you are running other browsers than Safari:
http://www.f-secure.com/v-descs/trojan-downloader_osx_flashback_i.shtml -
TS1398 My phone is not able to find any wifi networks.
My phone is not able to find any wifi networks.
I have another i phone and it is connected just fine, my ipad and computers are conneted just fine.
I followed apples directions but still not working.
It stopped working around december 5th.Thats odd unless its a Windows 9x system lol. You shouldn't need drivers for USB storage devices. They are designed to identify themselves as Mass Storage class devices which will run with the built in drivers after Windows 98. Occasionally you will get a device that have deliberately been designed to not meet the standards (for extra features) but you saying this happens with other USB devices says this isn't the case.
Does it only happen with storage devices? Like hard drives, flash drives etc?
The model and windows version shouldn't make much of a difference in this case but it doesn't hurt to know what kind of system you are using.
Look up the USB controller in your system, if there are drivers for that, download them. If it's an already Windows supported device there is no need to download anything for it (have your Windows disc handy if you use XP) then uninstall the USB controller from the Windows Device Manager using the option to remove the drivers as well if the option is there. Restart and let Windows find the USB controller and install it (and any other devices attached to the USB bus). You may find your keyboard, mouse and any other USB devices won't work until Windows has finished installing them. Just give it some time, Windows will get there. -
Where used list is not working for IMG nodes/Document in solar01
hi experts
In template project , we are using same IMG objects in different business processes and subsequent configuration document is attached to each IMG node in configuration tab. ( like same IMG node - define order types used in different business process configuration tab )
when i use " where used list " from the configuration tab , its not showing the IMG objects used in different business processes in the same project. whereas its showing the IMG nodes used in the different project.
I need to find out the same IMG objects/ document used in the same project using the " Where used list " button.
Please provide your answers
Note : we have linked one configuration document to same IMG nodes used in different business. " where used list " also not working for documents as well
Thanks
Sol manHello there,
I just tried some tests and couldn't face any problem with locating other usages for the objects in configuration tab.
You mentioned a configuration document, so have in mind that the document usage will only be considered if it is a link to the same document and not just a copy.
e.g:
Here I created a document in this node:
Then I added it as a link here:
and as a copy here:
When I go back to the original node and use the where-used, it'll only show the original and the link:
This happens because after copying a document, it is considered as a new one instead of another usage of the original one.
best regards,
Fabricius -
Help needed I updated my ipad2 with iOS5 but few of my dashbaords (HTML5) are not working now ,can any one let me know how to downgrade the OS as we have a meeting coming up .. its urgent
Downgrading the iOS is not supported. If you are using Safari this try clearing its cache via Settings > Safari.
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
After Mountain Lion download, FaceTime is not working anymore. Any ideas?
After Mountain Lion download, FaceTime is not working anymore. Any ideas?
I have reinstalled mountain Lion again . This time, Facetime works when somebody calls me, and I can do calls from my Mac again. But the problem was still that I was not able to call my iPad, what I was able to do with Lion (I had one Apple-ID and two call adresses). The solution was this time to generate a second Apple-ID from the Facetime in my Mac (this doesn't affect your main Apple-ID, it's only used for Facetime). Now, it works! ;-)
-
Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
Control-clicking does not work in Finder
Ever since installing the 10.4.5 update, control-clicking does not work in Finder. When I try to do it, Finder automatically restarts itself. This happens in any Finder window and on the desktop itself. Whether I am control-clicking an Application icon or trying to 'Get Info' on a file, Finder restarts itself. I repaired permissions and it did not fix the problem.
Any idea on how to fix this? Thanks a lot!
David
Edit: Nevermind. I fixed it by deleting the JIMZip.plugin file in my Contexual Menu folder. I found the answer in another thread. I apologize for searching after I created this thread.David,
Can you identify any corrupted or incompatible files in either your Macintosh HD/Library/Contextual Menu Items folder, or your Macintosh HD/Users/yourhomefolder/Library/Contextual Menu Items folder?
If so you may be able to uninstall/reinstall the associated application.
You may also consider temporary manual removal and isolation of the suspect file to verify CM functionality.
;~) -
Using Gmail in iPhoto and cannot find any of my groups to email. I have at least seven or eight groups that I email, each containing over 50 addresses. Is there a way to locate my email groups using iPhoto to send out mail in Gmail? Using version 9.5.1 (902.17) OS is Mavericks 10.9.1.
Your question and description is not very clear to me, so hopefully something here will help:
1. Gmail is a service not an app or a place. So you need to access the service with an app - that can be iPhoto, Mail, Outlook or any other mail client, or even a Web Browser like Safari or Firefox.
So you can't "go to GMail" as you write, but instead you go to an application set up to use the GMail service.
2. iPhoto is not a mail client. It's a handy way to email pics to Grandma, but for what you're doing you need to use an app that supports all of the Gmail service. iPhoto doesn't. There is no way around that.
3. How to send to groups will vary depending on what app you use to access the GMail service. All of these apps can receive photos from iPhoto, either - as in the case of Mail and Outlook, via the Share function - or, in the case of all the rest - via a Media Browser.
For help sending to Groups using any of these other apps you need to ask omn their respective forums. But the workflow is quite simple:
Using Mail or Outlook set in the iPhoto Prefereneces:
1. Select the pic(s) you want to share.
2. Choose email from the Share function
3. Make your selections re size etc
4. The email opens up in Mail or Outlook
- from there you need to figure out how to use the email client.
Using any other app:
1. In the mail app create a new email
2. Click on the Attach button or link
3. Use the Media browser to select the pic(s) you want to send
4. Attach them
- from there you need to figure out how to use the email client.
For help accessing your photos in iPhoto see this user tip:
https://discussions.apple.com/docs/DOC-4491 -
Bottom row of the keyboard is not working in a vertical orientation on the iPhone 3Gs. the "slide to unlock" and all keys on the calculator on both orientation works fine. I can use the keyboard on horizontal orientation. The tabs on bottom of all apps also work fine.
I have already tried holding down the power button and home button for 10 seconds, but no difference.I've had this problem on and off for the last few weeks (around, but not directly related, to upgrade to 6.1...can't remember if was before or after)....I'm very convinced it's a software problem (as there have been times when the bottom row works perfectly, without any need to "press" differently or anything).
However, it seems to be a rather resilient software issue, as a full restore does not consistently fix it, and it applies to more than just the keyboard; if I open a drawing app, there's definitely a row (about 4mm up from the edge of the screen closest to home button) where I cannot draw.
It's happened 4 times now. Originally it went away with a restore from backup, then worked for 2 more days. The second and third times, it went away with a full restore (although I did two full restores in between those two restores that did nothing, so restore didn't consistently fix it)....and it seemed to return in the most random of circumstances.
I paid very close attention to what apps I was using the last time it was working so that I could spot which app, if any, might be causing the issue. I deleted several apps, I stopped using the games and many other apps. I only used three apps between it working fine and starting up as a problem again: mail, safari and messages.
I was convinced it was mail, as it happened this morning when I picked up my phone off the bedside table to respond to a new email. It was working when I went to bed. I picked up the phone when it buzzed, hit the email app, hit reply and started to type....**** bottom row wasn't working again.
However, tonight I did 2 things....one of them worked because it went back to normal (sorry, I don't know which as I was exasperated and trying a number of things).
The two things I did between a broken keyboard and a working keyboard were:
1) adding a second keyboard (English(Canada)), changing to this keyboard, and changing back
2) disabling Siri...and then turning it back on...and then disabling Siri's "Raise to Speak"
In retrospect, I wonder if it actually was the "Raise to Speak" that was putting the phone into a weird state, and might explain why the phone would just "suddenly" start behaving strangely when I picked it up. Of note, the "raise to speak" hasn't actually triggered Siri to come on in months anyway.
Regardless, the keyboard is back to normal now...and I'm just going to leave "Raise to Speak" off. I've put the keyboard back to just "English" with no alternates and Siri remains on otherwise without issue. -
EA4500 on Sniper Hill ISP is not working so far, any ideas??
Hello everybody, I am deployed to Afghanistan. The ISP provided on the base is called Sniper Hill. The basic setup is there are CAT5e drops in every room. You plug in, and it is all web based to pay for and sign in to the service. Other people have successfully connected there routers made by other manufacturers, why won't the EA4500 connect? I've tried a lot of different ideas from reading different stuff round the net including the forums here. The Problem starts when after I sign in. When I open explorer I get the normal redirect to the sign in page. Once I sign in it's like the connection dies. I've seen a lot of suggestions that the server is picking up on a router on their network and blocks everything. I've tried mac addy clone, fixed IP, DMZ, NAT off, using the different connection types versus plain old Dynamic IP. Anyone got any ideas? The only thing I can tell you about the other routers people are using is they are a European version, you can tell by the plug that comes on them. I don't want to have to buy another router to use here. I'll keep this one and use it at home for sure but I'd like to use it here. Thanx
Correct me if I'm wrong, you've tried to set up the router using the CD that came w/it right? If that did not work then please try to set the router manually. Click the link below to check on how to install the router manually. http://homekb.cisco.com/Cisco2/ukp.aspx?pid=80&vw=1&articleid=22734
-
Windows Server 2012 - Printing using UNC path not working
Hi,
I have a problem printing using the printer's UNC path ("\\Server_Name\Printer_Hostname") to work with a web
app hosted on IIS 8. With a windows forms application the UNC path is working fine and the app prints.
With
the web app I receive an error "The data area passed to a system call is tool small".
Also,
in the event viewer under Applications and Services Logs -> Microsoft -> PrintService -> Operational, I receive the error "The print spooler failed to reopen an existing printer connection because it could not read the configuration information
from the registry key S-1-5-82-1980832875-2702362896-1795126167-3622310632-1152289074\Printers\Connections. The print spooler could not open the registry key. This can occur if the registry key is corrupt or missing, or if the registry recently became unavailable."I have contacted IIS forum support.
Please review the link: http://forums.iis.net/p/1213109/2079229.aspx?Re+Windows+Server+2012+Printing+using+UNC+path+not+working
Their final response:
Printing from ASP.NET using System.Drawing.Printing itself is a horrible approach, as this namespace was designed for Windows Forms only. The designers did not take everything about ASP.NET in mind, so any issue can happen. That can answer why the HP model
works while the Samsung fails, as the HP one just "happens
to work",
http://msdn.microsoft.com/en-us/library/system.drawing.printing.printdocument.aspx
Similarly, System.Printing was designed just for WPF.
About which printing API to use in ASP.NET/IIS, there is no clear answer so far. Thus, your only resource is Microsoft support, who can perform further analysis (with their dedicate utilities and of course Windows source code) and might come across a solution
to help you out. This is not a trivial scenario.
Maybe you are looking for
-
How do I use an external hard drive that has been used on a windows machine on my mac....
I have recently just bought a new mac and want to edit files that are currently saved on my external hard drive that I used on my windows machine. Is there any way to be able to do this or will I have to transfer all files across to my mac and then r
-
Can You Create Trend Line in CFCHART?
Have pretty much got CF7 Charts and WebCharts3D down, at least to the point where they can do what I need the most. However, the one thing I'd like to be able to do, but not sure if it's possible, is create a TREND LINE. This would be a LINE charts w
-
New to live office... Where can i get the webservive url from? thanks all
-
Link revaluation accounts to different General Ledger accounts
Hi, Could you tell me the Path or Transaction code to create revaluation account to the General Ledger accounts. Regards, Swetha
-
User exit for post good receipt for tcode VL32n(inbound delivery)
HI, I need a user exit which should get triggered when the user hit the button "post good receipt" under tcode VL32N. I appreciate your help. Thanks, Sanjay