Using currency conversion and text variable at the same time

Hi all,
In a 3.5 bex query, i am applying currency conversion on a key figure with a variable of 0currency.
as i know, to be able to apply currency conversion, variable of currency should not be in Free characteristics or in Filter.
it has to be selected only on the key figure.
but now, i want to use text variable for selected currency (with type replacement path). But as i know, to be able to use text variable, variable of currency has to be
in Free characteristics or in Filter.
Can you please advise, how to both use currency conversion and text variable on currency?
Thanks in advance.
Sancho

Sancho,
I'm not 100% sure about this, but I'm thinking that if you are pulling the text variable from a selection in a structure, you should not need it in the free characteristic or filter. Try creating a structure, placing the currency in it as a selection, and creating a text variable as the title for the selection that is based on the currency. This may help.
Cheers,
Rusty

Similar Messages

  • My iPhone 4s will not sync a changed playlist from itunes unless i turn off music match. Shouldn't I be able to use a playlist and music match at the same time?

    my iPhone 4s will not sync a changed playlist from itunes unless i turn off music match. Shouldn't I be able to use a playlist and music match at the same time?

    It's not entirely impossible actually as someone has pointed out to me that I can turn on Call Forwarding and that stops any incoming calls. I've just forwarded it to my google voice number and then turned on "do not disturb" in google voice and whenever I get a call it goes straight to my google voice voicemail and my phone does nothing. The only thing now is I still get text messages but I think the phone calls bugged me more because they would make my music turn off for much longer.
    Even though this isn't a perfect solution it's something so far so maybe you shouldn't just come out and say there's NOTHING I can do because so far I've found part of a solution. If you don't have anyting productive to say then just don't reply and close the tab. Thanks.
    At this point I'm wondering if anyone knows of any Jailbreak tweaks that can enable what I want. Unless of course it's agaisnt the rules of this forum to mention jailbreak stuff...

  • I need to know how to edit a drawing - basically remove the arrows and text but at the same time match the background of the existing pic. then re add new text. how do i erase the arrows and text and arrows but match current background of pic. step by ste

    i need to know how to edit a drawing - basically remove the arrows and text but at the same time match the background of the existing pic. then re add new text. how do i erase the arrows and text and arrows but match current background of pic. step by step explanation please beginner

    Please post (a relevant section of) it right on this Forum.

  • How can i use both Windows and Mac os at the same time on my iMac

    How can i use both Windows and Mac os at the same time on my iMac

    You can use Parallels desktop or VM Fusion to run both operating systems at the same time. Both programs work well, but I personally perfer VM Fusion.

  • Using internal Speakers and optical Output at the same time ?

    Hello,
    is it now possible to use the internal Speakers and optical Output at the same time ?
    Is this a software or hardware limitation ?
    Every day im disconnecting the optical output. It can't be good for the contacts. I wont spend over 100 euros buying an external soundcard to solve this problem.
    Any Ideas ?
    Thanks ? best regards
    mc
    IMAC 24 Intel   Mac OS X (10.4.8)  

    New Discussions ReponsesThe new system for discussions asks that after you mark your question as Solved. You should take the time to mark any posts that have aided you with the tag and the post that provided your answer with the tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts.
    Alternatively, you can change the status to Answered.
    If we use the forums properly they will work well...

  • Expand, unhide table and set variable at the same time?

    Hi all,
    How should i go about to create the following?
    I want to Expand a table at the same time as i set at variable and unhide another table. I have implemented a single-click solution i the Table API that works fine. I would like to use the Table API for this problem also.
    Is this possible? Do I need to make it in multiple steps ie some kind of java-script?
    Have tried this but it wont work:
    SAP_BW_URL_Get() +  ' ' ''&DATA_PROVIDER=DATAPROVIDER_1&' 'CMD=Expand&IOBJNM=0MATERIAL&FILTER_IOBJNM=0CUSTOMER&FILTER_VALUE=' I_CHAVL '&VAR_NAME_1=ZLS_CUST&VAR_VALUE_EXT_1=' I_CHAVL '&CMD_1=ITEM%3DTABLE_2%26HIDDEN%3D' ''''
    Any ideas?
    Cheers,
    Max

    Hi Alex,
    This is not written in the WAD, but in the Table API. The table API generates the link, creating a JavaScript call. But i hvae also tried to write this url directly in the WAD on an http://.... format but it still does not work.
    BR/Max

  • Can I use a usb and wireless keyboard at the same time on a mac pro

    I wish to use the Mac Pro USB keyboard for Logic shortcuts and the Mac Pro wireless keyboard for normal typing etc. Is this possible?

    Just as Matt has said, the Mac uses "all devices active" philosophy with keyboards and pointing devices. It does not automatically Switch to a later-installed device, it uses them ALL at the same time by default.

  • Using External Speakers And Internal Speakers At The Same Time

    I know this is probably a long shot, but is it possible to use both the external speakers I have (the cheaper Bose ones) and the internal speakers of my Intel iMac at the same time?
    Probably not, right?
    I'm just looking for a cool three speaker kind of experience. Just wondering. Thanks for the help. Asante sana.
    Pete

    Pete
    Once you plug into the external headphone jack that's were your audio output for iTunes is. The exception here for me is at start-up, the sound will use the internals untill the external set-up is detected.
    Something else you can do to add more to your external set-up is to split it with an adapter(s).
    Examples use this adapter: http://www.maplin.co.uk/Module.aspx?TabID=1&DOY=search&ModuleNo=1221&criteria= one lead to your powered externals,
    and the other to a Stereo or TV with this adapter: http://www.maplin.co.uk/Module.aspx?TabID=1&ModuleNo=31700&doy=19m2
    You can buy these adapters at most electronics outlets.
    Hope this helps you expand on your sound set-up!
    Dennis
    17" iMac Intel Core Duo 1.5GB Ram   Mac OS X (10.4.8)   Maxtor 300GB FireWire 2G Nano

  • Using original airport and airport express at the same time

    I am currently using a G4 iBook (14 in, 1.33 GHz, 512 MB RAM, 10.3.9) with Airport Express, which works great. However, I'd also like to make my iMac (slot-loading, 500 MHz, 384 MB RAM, 10.2.8) wireless. The iMac will accept an original airport card with an adapter. Should I anticipate any problems combining old and new technology like this?
    Thanks!

    Hi - and thank you for answering my original question. However, I have run into a bit of a problem. The installation of the airport card in the G3 iMac went fine, and I can see the network under the airport icon. But, when I go to join the network, the password I use for the iBook doesn't work and I cannot join. I get either "There was an error joining the selected Airport network" or "The password is not correct for the selected network". Should I be able to join the existing network using the same password? Does this sound like a configuration problem?
    Some additional info which may not be relevant - my current setup with the iMac (prior to trying to go wireless) has the iMac connected to a Linksys cable/DSL router via an Ethernet cable. The DSL router is plugged into the original DSL modem I got from Earthlink. The router was added so that I can also use a laptop PC to work at home - but the PC laptop has not been plugged into the router during the time I've been trying to connect to the wireless network with the iMac. I'm told by the IT guys at work that the way things are connected and configured, the router does the actual dialing and not the DSL modem.
    Thanks in advance for any advice you can offer.

  • Using both WiFi and GPRS (not at the same time!)

    When at home I want my E71 to use the WiFi, probably also when available in hotels etc. but otherwise I want to use the GPRS data conenction. There doesn't seem to be any easy way to set things up so that the E71 uses the 'best' connection.
    Am I missing something or do I always have to select the connection method manually?

    Your not missing anything, its not there. If you want to change the connection an application uses you need to do it manually each time.
    The other option is to load an application such as this one.
    http://connect.psiloc.com/
    Message Edited by twopuds on 06-Sep-2008 07:04 PM

  • TS3018 earbuds and bluetooth speakers at the same time?

    Can IPod Touch be used with earbuds and bluetooth speakers at the same time?

    No. You can only select which output device you want.

  • Can I use an iPad and a ipad2 with the same iTunes in my computer? I want to use both

    Can I use an iPad and a ipad2 with the same iTunes in my computer? I want to use both. Want to give one to wife.do I need to open a new iTunes account for her?

    bashepard wrote:
    Can I use an iPad and a ipad2 with the same iTunes in my computer? I want to use both.
    Yes, No problem at all.
    Want to give one to wife.do I need to open a new iTunes account for her?
    No - you can share the same iTunes account (my wife and I share the same account). But when you sync the iPads, just remember to select the correct content for her iPad and the correct content for your iPad.

  • HT201263 When my Ipod touch is in autolock I can only restart the device holding the sleep/wake button and home button at the same time for 10 seconds.  While in auto-lock it is using battery power and will do so until the battery is drained.  Whats wrong

    When my Ipod touch is in autolock I can only restart the device holding the sleep/wake button and home button at the same time for 10 seconds.  While in auto-lock it is using battery power and will do so until the battery is drained.  Whats wrong?

    - Try a reset. Nothing is lost:
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears
    - Connect the iPod to your computer and try to restore via iTunes. Try placing in Recovery mode if necessary to restore.
    - If you can't turn the iPod completely off, let the batter fully drain. After charging for at lerast anhour try again
    - If still not successful time for an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.

  • I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

    I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

    After the Apple logo appears, what happens then? Can you hear any sounds or if you tap on the screen, does it seem like apps can open or are you just seeing a black screen? You might have a hardware problem, but you can try restoring the software and see what happens.
    Read this in its entirety before you do anything. Make sure you read the sections at the end about using recovery mode.
    iTunes: Restoring iOS software - Support - Apple

  • I am using several Macs running Yosemite. I was recently "upgraded" to Xfinity's new cable modem which can support both 2.5Ghz and 5Ghz networks at the same time. Actually I can connect to the internet over both with a satisfactory bump in speed for

    I am using several Macs running Yosemite. I was recently “upgraded” to Xfinity’s new cable modem which can support both 2.5Ghz and 5Ghz networks at the same time. Actually I can connect to the internet over both with a satisfactory bump in speed for the Ghz. However when I connect to the 5Ghz the Time capsule disappears from the Airport Utility and claims to be Not Found. Is there something I have done wrong or just a Yosemite Teething Problem

    First restart your mac and try again.
    It could be
    that the router and the TC are interfering wirelessly with each other.
    You can check this by pressing the option key while clicking on the wireless icon on your screen
    Open Wireless Diagnostics
    enter your user password
    Press CMD 4 then Scan
    You will see all the wireless channels being used in your location and you can check if they are on the same channel
    Make the SSID for the TC simple like MyTC
    Set 5Ghz to auto
    Update the TC
    Try again
    Ted

Maybe you are looking for

  • I can't open itunes.  It doesn't respond.  I am not technically savy.  Does anyone know how to make it work?

    I haven't been able to use itunes for months.  I can't get itunes to open on my pc.  I recently got a new ipod and I really want to copy some music from cd's.  I've tried uninstalling/installing itunes, quicktime.  This shouldn't be this hard...shoul

  • How do I save only part of a PDF file?

    I have a PDF of a book layout, which is 176 pages. It's one big file. How can I save only selected pages as a separate PDF? Thanks David Heim

  • Wrong posting period created and has transactions, how to amend

    Hi All, I have created the posting period in 2005B, forgot to change the Sub-Periods from defaulted Year to Months. So my posting period for 2009 is actually only one period instead of the normal 12 periods in a month. I have some transactions posted

  • Impossible Debug. Infuritate situtation

    Hi. I did a post in the past about this sistuation: I CAN NOT DEBUG WHAT THE HELL IS GOING ON INSIDE DPS WEBVIEW. My application is very well written: it is using RequireJS via CoffeeScript, compiled with NodeJS (so "you forgot the semi-colon in the

  • SQL loader zoned and nullif

    Hi, I am using SQL loader to insert data from a flat file. While searching for other options in sqlloader. I have found Zoned datatype. If I have some negative value in flat file like 98765.4321- now I have searched on internet and found if I write Z