Using different video outputs?

Hello,
I was wondering if Director can use the different video
outputs on many video cards? I'd like to use the S-Video to send
video to a projector and then the VGA output to a monitor.

Out of the box... no.
Check this link.
http://www.updatestage.com/external/the-mile-high-table-oproducts.html
Look under "Device Control/Input" and "Video" categories.
Hope that helps.

Similar Messages

AC Power stops when using s-video output

This only happens when using the s-video output. It usually takes about an hour before the ac power adapter stops working then the powerbook switches to battery power.
For all other times when not using the video output, it would work normally [ i could leave the ac power plugged in for weeks without this problem occuring ].
Is there a way to fix this when using the s-video output.
Powerbook G4 1.33 GHz Mac OS X (10.4.6)

If you know someone with another 65W power adapter I would try using it to see if it does the same thing. If it doesn't then you know to buy a new power adapter.

Do you need to have the retina display option to have 3 different video outputs?

Do you need to have the retina display option to have 3 different video outputs?

http://en.wikipedia.org/wiki/Video_card
http://support.apple.com/kb/ht5842 Maverick requirements.

Using both video outputs

I am using both video outputs on the back of the mini, VGA and HDMI. Thes VGA is running to a projector and the HDMI is running to a computer monitor. I am also running Bootcamp WINDOWS 7. When I power up the Mac, the computer monitor goes to sleep and defaults to the projector as the main monitor. If I power on the projector first, before powering the computer on and then power the MAC on, it recongnizes the computer monitor as the default monitor. Why can't the MAC mini recognize the computer monitor(HDMI) as the default when both video outputs are connected? HELP!

Try putting the setup in Extended Desktop Mode (Mirroring off) and make the Monitor the main or primary display as shown in the following article's
Aperture 3 User Manual: Configuring Mac OS X for Multiple Displays
Set the Primary Display on a Dual-Screen Mac Setup

IMac G5 iSight - Resolution problems when using s-video output.

Good afternoon all.
I have an iMac G5 and the only video output it has is a mini VGA socket. I have used this with a mini VGA to S-Video converter cable from Apple and am getting some odd results.
The Mac is running Leopard 1.5.7 and I'm outputting to a fairly old Panasonic CRT TV.
The problem I find is that when I plug in my mini VGA adaptor to the Mac it reduces the resolution on the Mac screen down to 1024x768 (stretched). The TV outputted TV image looks great, but I can't seem to keep my native resolution of 1440x900 on the Mac display.
If I do go and change the resolution in "displays" in the sys' prefs' then it just seems to keep the 1024x768 resolution on the Mac but this time without stretching it.
Does anyone know how I can keep my Mac at its native resolution of 1440x900 while still outputting to s-video to the TV?
Any and all help will be greatly appreciated.
Thank you again in advance.
Stuart

Hi
I have the same config as you: I have been using it for years to view on my tv dvds or videos from the web.
To my knowledge there is no way to acheive what you wish: when you plug the adaptor in the mac adjust to your output source and its main display (the g5 display) will reflect that with the result that it becomes very difficult to use.
Maybe there is a way to try changing the resolution in a middlle"configuration" which would give an acceptable viewing on the tv as well as on the g5.
Personally I keep plugging and unplugging the adaptor as needed.

KMS using wrong video output

Hi all,
I have a Zenbook Prime and used it in dual screen mode via its HDMI output yesterday with xrandr. I unplugged the cable, conditnued using it, stopped it.
Now when I start it, as soon as initramfs finished loading, Linux uses the HDMI output to display my tty (even if no cable is plugged), so it prompts for my username on the HDMI output and the screen of my laptop becomes black. All the boot sequence up to this part is made on the correct screen but then this screen is not used anymore by linux. Even if with xrandr I try to use it I stays black. I can still control backlighting but nothing is displayed.
After some research, it appears that this decision is made by KMS (https://wiki.archlinux.org/index.php/Ke … de_Setting). When I disable KMS with nomodeset my tty is displayed on the laptop screen. The problem is that my graphic driver (intel) requires KMS to be enabled and thus prevents me from starting the X server without KMS.
So what I tried then is to force KMS to use my integrated screen instead of the HDMI output, with the video= parameters on the kernel command line. With these parameters I succeeded to disable the HDMI output, but could not enable mine with parameters like
video=HDMI-A-1:d video=eDP-1:1920x1080 D video=DP-1:1920x1080 D. So all my screens are black.
Also, if I plug a archiso usb key it starts its tty on the correct screen.
Any idea on how to debug better/fix this problem? I tried dmesg but see no interesting information about KMS...
Olivier
Last edited by jolivier (2013-07-31 12:55:08)

Ok I found this topic https://bbs.archlinux.org/viewtopic.php?id=167314, apparently my problem is related to theirs and is due to the 3.10 linux kernel. I thought this forum content was indexed by google but apparently not ^^, next time I'll also search here.

Using S-Video output

I just got my universal dock, I plugged my audio output thru the line-out of the dock and used the S-Video port to connect to my TV, problem : the sound is playing but not the video, question : does the power port need to be plugged to, and/or do I need a special apple S-Video cable?

ok, so I turned to TV on signal in the Video setting menu, now I have video and sound, but the video is in black and white??? why???

How to use different video formats in the one timeline?

Hi everyone,
So I am in the middle of stringing together a rough cut for a surf flick/documentary shot in some remote Indonesian islands…
Things so far are going well, but I am slightly confused regarding the best way to tackle a slight issue (hopefully slight!) of video format compatibility.
The main shooting for the film was done with .mov video format and this has been imported/captured into final cut pro 7 using the correct settings, which has now formed the basis for my rough cut.
However, I did a lot of filming with some other cameras (underwater, POV etc) and so also have some crucial footage in different formats that to my knowledge will not be compatible with the timeline that I have already created in FCP.
The files are as following:
AVI
MOD
MP4
I am assuming the best way to go about things is convert all these different files into a compatible form that I can then drop straight into my existing timeline.
Unfortunately, I am just beginning to learn the more techy aspects of editing and I don’t have the first idea of how to go about doing this…?
Any helpful feedback would be greatly appreciated…
Thanks in advance,
m

Although there are kinds of standard workflows for best quality in final product, it helps to know a bit more about your setup... what is your primary format? Without knowing that, the best way forward is to convert all of your footage to Apple ProRes. Especially the MP4 stuff. There are different ways about doing that, but I personally recommend Compressor. This can take some time depending on the amount and lengths of your shots, but it is well worth the process.
Make sure you choose 48k / 16bit AIF for all of your shots that have audio. If some of your footage is 1080p and some is 720p, I personally leave that alone because when you have this type of a difference in footage, I like to set my sequence to 720p giving me the option to move or pan the 1080p clips inside of the 720p sequence. Final Cut Pro is very good at handling that difference.
Hope the edit goes well; sounds like a nice project!

Video Output for PXI Embedded Real-Time Controller ?

I plan to purchase a PXI Embedded Real-Time Controller for security monitoring.
Is it possible to use the video output of a PXI Controller running RTOS to display messages from a LabVIEW RT application ? According to the documentation, it seems that the use of the video output is only possible for PXI Controllers running Windows XP.
Does it exist a specific application to do this with LabVIEW RT ?
Thanx.
H.L.
Solved!
Go to Solution.

Hi Yann,
The situation seems a bit confusing as in the link you've given above using the local monitor from a pxi labview rt system as the HMI without a pc attached, two messages (here and here) say that it is possible to display an image on the video output of a PXI RT controller using a function of the NI-IMAQ librarey (namely, the IMAQ RT Video Out VI) !
I have the NI-IMAQ library but no PXI controller to test if this solution should work or not
Does anyone have the answer ?
Thanx,
H.L.

Ipod video output.

has anyone tried using the video output on the new ipods. and if so have you set it up for your car or truck. ive had a setup for my ipod in my truck for a couple years now and im thinking since i got the new ipod i should update and get a screen.

has anyone tried using the video output on the new ipods. and if so have you set it up for your car or truck. ive had a setup for my ipod in my truck for a couple years now and im thinking since i got the new ipod i should update and get a screen.

Multi-clip with different video codecs. Can it be done?

Is it possible to create a multi-clip when using different video codec (i.e. HDV 1080i50 & HDV 1080p25)?
Thanks.

Nope. Convert one to match the other using Compressor. Or better yet, convert them both to matching ProRes 422 files.
Message was edited by: thrillcat editorial

[solved]No video output in Skype with nvidia driver - vesa works fine!

Hi,
I'm struggling to get Skype video working. The webcam works perfectly - the other side can see me. But I can see neither myself nor my opponent - the corresponding place in the Skype window just gets white. It doesn't matter whether Compiz is active or not. I can also see myself when using cheese, video output also works properly.
Now, I supposed that it's an issue with my graphics driver (the proprietary nvidia driver) and changed it to vesa in the xorg.conf. Well, I have a resolution of 800x600 now, but the video in Skype is working perfectly! I will go ahead and try an older version of the nvidia driver but maybe it's a known issue and there is a workaround?
Thanks,
PhotonX
edit: Same problem on the 173 driver version.
Last edited by PhotonX (2009-08-27 18:49:21)

Solution found here: http://ubuntu-virginia.ubuntuforums.org … ostcount=3

No video output option at movie project setting can not use my blackmagic video card

no video output option at movie project setting can not use my blackmagic video card

There's no change if I hold command-R to boot into recovery. The mac chimes on powerup but nothing else seems to happen.
The machine has an SSD drive in it so I can't even listen to hear if it is loading anything or acting differently when I try different keypresses.
As I had some spare RAM lying around, I've tried swapping that in but no change there either. I still suspect it's a software rather than hardware problem, but without any way to control the boot up, I'm not sure how I can fix it.
I do have remote time machine backups - is there any way of restoring these manually, perhaps by removing the drive from the mac and copying the backup data over using another system? (Unfortunately I don't have any other mac systems to experiment with this, though)

How can I do live streaming with a Mac Book Pro 2011, using a new model of Sony HD camcorder which does not have firewire out/input? it comes only with a component video output, USB, HDMI and composite RCA output?

I need to do live streaming with a Mac Book Pro 2011, using a new model of Sony HD camcorder (http://store.sony.co...ber=HDRAX2000/H) ..this camcorder model does not have firewire out/input ..it comes only with a component video output, USB, HDMI and composite A/V video output..
I wonder how can I plug this camcorder to the firewire port of my laptop? Browsing on internet I found that Grass Valley Company produces this converter http://www.amazon.co...=A17MC6HOH9AVE6 ..but I am not sure -not even after checking the amazon reviews- if this device will send the video signal through firewire to my laptop, in order to live streaming properly? ..anyone in this forum could help me please?
Thanx

I can't broadcast with the built in iSight webcam... how would I zoom in or zoom out? or how would I pan? I've seem people doing it walking with their laptops but that's not an option for me... there's nothing wrong with my USB ports but that's neither an option to stream video because as far as I know through USB you can't connect video in apple operating systems ..you can for sure plug any video cam or photo camera through usb but as a drive to transfer data not as a live video camera... is by firewire an old interface developed by apple that you can connect all sorts of cameras to apple computers... unfortunately my new sony HDR-AX2000 camcorder doesn't have firewire output...
thanx

Concerning: VGA monitors using an Aluminum Powerbook G4 PowerPC 2004 15"-screen 1.5Ghz The DVI (converted to VGA) video output stopped working on this computer after 9 years of service. This raises question 1: Is there any way of fixing this? I've tried

Concerning: VGA monitors using an Aluminum Powerbook G4 PowerPC 2004 15"-screen 1.5Ghz
The DVI (converted to VGA) video output stopped working on this computer after 9 years of service. This raises question 1:
Is there any way of fixing this? I've tried the usual: triple checked all vga cables & devices through trial & error. Bought a new DVI-VGA adapter. Reset PRAM, PMU, etc. Nothing works. Something is probably damaged, because my KVM switch was not working unless I hot-reseated the vga cable into it, leading to this DVI port, and that is pretty rough stuff.
Question 2 (related):
This dovetails into this: Can I drive a VGA monitor with the s-video output port on this computer. It would take an s-video (male)-to-15-pin-VGA adapter. Has anyone does this? So far, I haven't even found the adapter mentioned anywhere.
Thanks for reading this.
el7

Thanks for the useful feedback, Knucklesmac. I agree. I must have blown something on the logic board -- because I had a faulty old KVM switch that would not switch between computers without some nasty hot-plugging/unplugging the VGA video cables. (wince!). It's like when Dizzy Dean ruined his arm because a line drive hit him in the foot and he readjusted his mechanics around the injury. I take the blame because this has been a great computer, and does not deserve any blame.
If it will help anyone else reading this thread, C2G (née Cables to Go) has some interesting ideas for still getting external video out of this computer:
-USB-to-VGA
http://www.cablestogo.com/product/30545
-Convert s-video or composite video signals to high resolution VGA
http://www.cablestogo.com/product/40971
The price range is $75-$85, which doesn't make horse sense to me for such an old computer -- which has a lot of life in it anyway, because its own 15" monitor is not chopped liver.
el7

Using different video outputs?

Similar Messages

Maybe you are looking for