Using DV Kitchen
I am trying to use DV Kitchen to encode an HD movie from FCP. In all their glossy advertising and their "Hey guys it's all so simple blurb" they don't seem to mention exactly how you get the movie from FCP into DV Kitchen to start with.
Anyone got any ideas?
Am I missing something here? Why even use DV Kitchen in the first place. You going to the web...right.?.
1. In the link above it says to use Quicktime movie conversion from FCP, then us that file in DV Kitchen. Why would you want to re-compress you timeline?
2. Why not just send your timeline right from FCP to Compressor to make your h.264. Saves a generation and unneeded steps to DV Kitchen. or...
3. Export from FCP using Quicktime movie export. All your doing here is wrapping you timeline that is already render into a Quicktime .mov (no real quality loss, a nat's butt if any). Send that to Compressor to make your h.264.
Why is DV Kitchen even in this equation? Is DV Kitchen going to add to the quality of the footage? Did the OP buy this product thinking it going to add greatness to the fini video? I'm asking questions not tearing down. I need to know the truth so I can pass it on to others... And if I wrong, I big enough to take criticism.
And if trabant just wants to know how to use DV Kitchen...that's great too.
Similar Messages
-
How to use IKEA KITCHEN PLANNER PN MY NEW IMAC. HELP !!
version 10.9.4 processer 2.7 GHz intel Core i5 memory 8 gb 1600MHz DDR3
Talk to IKEA. On their website, it does not indicate that the software will run on Mavericks. The highest OSX they cite is 10.8.2 - Mountain Lion.
Cheers,
GB -
Mac G4 Freezes/Shuts Down on Its Own
I have a Powermac G4 that when using, it appears to "freeze". The mouse and keyboard become non functional, and the display looks like it is frozen.
BUT The power light appears to be off, giving the impression that the computer has intermittently shut down.
Sometimes it takes a few attempts at pressing the power button to get it to turn back on. Other times, I've pulled the plug and plugged it back in and it would boot up the first time I press the power button.
Every time I boot it back up, the system clock resets itself and I need to put in the time and date again.
I would guess it is the battery or power supply.. are there any suggestions?Welcome!
Nearly all Macs have a thermal sensing system that tracks CPU core temps and will shut down the computer if it gets too hot. You can get utilities to monitor the temps, like this:
http://download.cnet.com/Temperature-Monitor/3000-2094_4-41089.html
or, since you are in Tiger, this Dashboard widget:
http://www.apple.com/downloads/dashboard/status/istatpro.html
I'm not sure what the critical temp is for an G4. My MDD 1.25ghz single processor has never posted a temp (via Temperature Monitor) greater than 117F/47C but dual-processor machine can run hotter. I thing the 140GF range is getting close to the danger zone.
If temps are running high, there is a physical action and a software action to consider.
The physical action is to make sue that air intakes and exhausts are not blocked. This mean keeping desk clutter away from the front panel and leaving at least six inches between the back panel and any obstruction. Also open the side door and see if there is a convention of dust bunnies clogging the air paths and fans. A good mucking out with a non-static brush can peel several degrees off the temps. I use a kitchen pastry brush with natural bristles and a wooden handle.
The software item is to see if you have a "runaway background process" demanding too much of the processor. The steps:
1) Quite any user applications so the computer is as normal idle.
2) Find and launch Activity Monitor (in Applications > Utilities.
3) If you've not done so before, set AM's "Show" setting (top part of its window) from "My Processes" to "All Processes."
4) Clip on the header item in the table that reads,"%CPU" to sort the processes by their CPU demands.
5) Let AM run for a minute or so. No process should be taking more than about 5% of the CPU if you've quit all other user apps before starting.
If this shows one or two processes hogging the CPU, post their names and we can guide you through taming or evicting them. -
My MacBook Air is boiling within 3 minutes of run
Hi,
I bought my MacBook Air around end of 2010.
And recently I started experiencing overheating within 10 minutes of run by using common softwares and web browsing.
Actually sometimes I've Chrome or Firefox with over 200 tabs (with flash blocker) or compiling something in the meantime, but this is how I using a Mac in a standard way (I'm a software developer).
Now I've change my place from UK to the Switzerland, where is much hotter (30 degress), but I don't this is the case.
In following screenshot you can see the temperature from Temperature Monitor at 18.43.56 (I just turn it on and run ) and 3 minutes later at 18.46.31.
The only process was installing some software which includes some compiling, but even that it should be not so critical (90 degrees for CPU?).
P.S. I know how to use Activity Monitor and Terminal to kill the processes which I don't use, so I monitor it constantly.
I started to use ice bag (from the freezer), which helps until I'll decide to some cooling pad, but I never need that.
So my question is, what's wrong?
I was reading about SMC reset here: http://support.apple.com/kb/HT3964
but I don't believe it'll help.
I've experienced yesterday two OSX crashes, at least one per week is a standard, I think it's because of overheating.
Here is another stats from my previous session (it's normal?):
before desparately I decided to put my laptop to the fridge after the OSX crash, so I could work afterwards for the next half an hour (I know that's the bad approach, sorry).
I read already thousands of similar problem on the internet, so I assuming I'm not only the one.
Thanks for any advises.
Environment:
My kernel:
Darwin kenorbs-MacBook-Air.local 10.8.0 Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386 i386
I've started using ceramic kitchen table for my table, it kind of works only when I don't do nothing on my laptop, so not really helps.
Summary:
Any ideas apart of reinstalling everything from scratch? It's time to buy a new MacBook?
Is there any advanced software or command that will give more information about the following problems?Now it's not so extremely hot, but it's very slow, almost as Pentium 200. Even now I'm typing this post, sometimes I've to wait 0,5-1sec to see the letters appearing. When I was opening this page, I've seen some widgets were rendering. Some of the pages loading endless. When typing some commands, I've to wait few seconds until they'll terminate using Control-C. When I change the application using CMD-Tab, I've to wait 1-2 seconds untill I could use it, it appears, mouse moving, but I can't click anything (probably swap). When I'm scrolling, it's freezing every few seconds. My load average is around 2-3. Basically I can't work on my laptop anymore. I've it on cold flat surface with power supply connected. Every day or few days I'm sending to you crashes.
My system is up-to-date. I don't want Lion for now, until my laptop will work, I heard it's even slower and worse (as even the post above as example).
Here are some Terminal logs:
new-host-2:~ kenorb$ sudo dmesg | tailEIR is supported.SSP is supported.en0: 802.11d country code set to 'FR'.en0: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140Auth result for: c0:3f:0e:51:ef:c0 No AckAuth result for: c0:3f:0e:51:ef:c0 MAC AUTH succeededAirPort: Link Up on en0AirPort: RSN handshake complete on en0BetterTouchTool (map: 0x8805000) triggered DYLD shared region unnest for map: 0x8805000, region 0x7fff88000000->0x7fff88200000. While not abnormal for debuggers, this increases system memory footprint until the target exits.Warning: audit space low (< 5% free)on audit log file-systemnew-host-2:~ kenorb$ uname -aDarwin kenorbs-MacBook-Air.local 10.8.0 Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386 i386 When running iotop, it's showing me lots of error:dtrace: error on enabled probe ID 5 (ID 19517: io:mach_kernel:buf_strategy:start): illegal operation in action #3 at DIF offset 0dtrace: error on enabled probe ID 5 (ID 19517: io:mach_kernel:buf_strategy:start): illegal operation in action #3 at DIF offset 0
Maybe because it's not optimized for Mac;p
new-host-2:~ kenorb$ sudo tail /var/log/secure.logAug 1 20:36:13 kenorbs-MacBook-Air nobody[5520]: audit warning: soft /var/auditAug 1 20:36:13 kenorbs-MacBook-Air nobody[5519]: audit warning: allsoftAug 1 20:36:13 kenorbs-MacBook-Air nobody[5522]: audit warning: closefile /var/audit/20120801000912.20120801183613Aug 1 21:40:00 kenorbs-MacBook-Air loginwindow[41]: in pam_sm_authenticate(): Failed to determine Kerberos principal name.Aug 1 21:40:00 kenorbs-MacBook-Air nobody[5777]: audit warning: soft /var/auditAug 1 21:40:00 kenorbs-MacBook-Air nobody[5778]: audit warning: allsoftAug 1 21:40:00 kenorbs-MacBook-Air nobody[5779]: audit warning: closefile /var/audit/20120801183613.20120801194000Aug 1 23:45:07 kenorbs-MacBook-Air nobody[15967]: audit warning: soft /var/auditAug 1 23:45:07 kenorbs-MacBook-Air nobody[15969]: audit warning: allsoftAug 1 23:45:07 kenorbs-MacBook-Air nobody[15968]: audit warning: closefile /var/audit/20120801194000.20120801214507 new-host-2:~ kenorb$ sudo tail /var/log/system.logAug 1 23:53:35 kenorbs-MacBook-Air com.cleverfiles.cfbackd[16137]: partition offset c805000Aug 1 23:53:35 kenorbs-MacBook-Air com.apple.launchd[1] (com.cleverfiles.cfbackd[16137]): Job appears to have crashed: Floating point exceptionAug 1 23:53:35 kenorbs-MacBook-Air com.apple.launchd[1] (com.cleverfiles.cfbackd): Throttling respawn: Will start in 10 secondsAug 1 23:53:35 kenorbs-MacBook-Air com.apple.ReportCrash.Root[16122]: 2012-08-01 23:53:35.601 ReportCrash[16122:3d2f] Saved crash report for cfbackd[16137] version ??? (???) to /Library/Logs/DiagnosticReports/cfbackd_2012-08-01-235335_localhost.crashAug 1 23:53:45 kenorbs-MacBook-Air com.cleverfiles.cfbackd[16138]: partition offset c805000Aug 1 23:53:45 kenorbs-MacBook-Air com.apple.launchd[1] (com.cleverfiles.cfbackd[16138]): Job appears to have crashed: Floating point exceptionAug 1 23:53:45 kenorbs-MacBook-Air com.apple.launchd[1] (com.cleverfiles.cfbackd): Throttling respawn: Will start in 10 secondsAug 1 23:53:45 kenorbs-MacBook-Air com.apple.ReportCrash.Root[16122]: 2012-08-01 23:53:45.751 ReportCrash[16122:402b] Saved crash report for cfbackd[16138] version ??? (???) to /Library/Logs/DiagnosticReports/cfbackd_2012-08-01-235345_localhost.crashAug 1 23:53:46 kenorbs-MacBook-Air sudo[16139]: kenorb : TTY=ttys000 ; PWD=/Users/kenorb ; USER=root ; COMMAND=/usr/bin/tail /var/log/system.logAug 1 23:53:50 kenorbs-MacBook-Air sudo[16140]: kenorb : TTY=ttys000 ; PWD=/Users/kenorb ; USER=root ; COMMAND=/usr/bin/tail /var/log/system.log
I've more than 1000 files of different kind of local apps crashes and 73 OSX crashes:
new-host-2:Logs kenorb$ find . | lessnew-host-2:Logs kenorb$ pwd/Users/kenorb/Library/Logsnew-host-2:Logs kenorb$ find . -name \*crash\* | wc -l 1168new-host-2:CrashReporter kenorb$ pwd/Library/Logs/CrashReporternew-host-2:CrashReporter kenorb$ find . | wc -l 73new-host-2:CrashReporter kenorb$ find . | xargs. ./cfbackd_2012-07-24-233811_localhost.crash ./cfbackd_2012-07-24-233821_localhost.crash ./cfbackd_2012-07-24-233831_localhost.crash ./cfbackd_2012-07-24-233841_localhost.crash ./cfbackd_2012-07-24-233851_localhost.crash ./cfbackd_2012-07-24-233901_localhost.crash ./cfbackd_2012-07-24-233911_localhost.crash ./cfbackd_2012-07-24-233922_localhost.crash ./cfbackd_2012-07-24-233932_localhost.crash ./cfbackd_2012-07-24-233942_localhost.crash ./cfbackd_2012-07-24-233952_localhost.crash ./cfbackd_2012-07-24-234002_localhost.crash ./cfbackd_2012-07-24-234012_localhost.crash ./cfbackd_2012-07-24-234022_localhost.crash ./cfbackd_2012-07-24-234032_localhost.crash ./cfbackd_2012-07-24-234042_localhost.crash ./cfbackd_2012-07-24-234053_localhost.crash ./cfbackd_2012-07-24-234103_localhost.crash ./cfbackd_2012-07-24-234113_localhost.crash ./cfbackd_2012-07-24-234123_localhost.crash ./cfbackd_2012-08-01-220455_localhost.crash ./cfbackd_2012-08-01-220505_localhost.crash ./cfbackd_2012-08-01-220515_localhost.crash ./cfbackd_2012-08-01-220525_localhost.crash ./cfbackd_2012-08-01-220536_localhost.crash ./cfbackd_2012-08-01-220546_localhost.crash ./cfbackd_2012-08-01-220556_localhost.crash ./cfbackd_2012-08-01-220606_localhost.crash ./cfbackd_2012-08-01-220616_localhost.crash ./cfbackd_2012-08-01-220627_localhost.crash ./cfbackd_2012-08-01-220637_localhost.crash ./cfbackd_2012-08-01-220647_localhost.crash ./cfbackd_2012-08-01-220657_localhost.crash ./cfbackd_2012-08-01-220708_localhost.crash ./cfbackd_2012-08-01-220718_localhost.crash ./cfbackd_2012-08-01-220728_localhost.crash ./cfbackd_2012-08-01-220738_localhost.crash ./cfbackd_2012-08-01-220749_localhost.crash ./cfbackd_2012-08-02-000321_localhost.crash ./cfbackd_2012-08-02-000331_localhost.crash ./cfbackd_2012-08-02-000341_localhost.crash ./cfbackd_2012-08-02-000351_localhost.crash ./cfbackd_2012-08-02-000401_localhost.crash ./cfbackd_2012-08-02-000412_localhost.crash ./cfbackd_2012-08-02-000422_localhost.crash ./cfbackd_2012-08-02-000432_localhost.crash ./cfbackd_2012-08-02-000442_localhost.crash ./cfbackd_2012-08-02-000452_localhost.crash ./cfbackd_2012-08-02-000503_localhost.crash ./cfbackd_2012-08-02-000513_localhost.crash ./cfbackd_2012-08-02-000523_localhost.crash ./cfbackd_2012-08-02-000533_localhost.crash ./cfbackd_2012-08-02-000543_localhost.crash ./cfbackd_2012-08-02-000554_localhost.crash ./cfbackd_2012-08-02-000604_localhost.crash ./cfbackd_2012-08-02-000614_localhost.crash ./cfbackd_2012-08-02-000624_localhost.crash ./cfbackd_2012-08-02-000634_localhost.crash ./fc-cache_2012-07-28-130739-1_localhost.crash ./fc-cache_2012-07-28-130739_localhost.crash ./gconftool-2_2012-07-28-143228-1_localhost.crash ./gconftool-2_2012-07-28-143228_localhost.crash ./mdworker_2012-07-29-180410_localhost.crash ./mdworker_2012-07-29-180417_localhost.crash ./mdworker_2012-07-29-180512_localhost.crash ./mdworker_2012-07-29-180524_localhost.crash ./mdworker_2012-07-29-234257_localhost.crash ./mdworker_2012-07-29-234302_localhost.crash ./mdworker_2012-07-29-234309_localhost.crash ./mdworker_2012-07-29-234315_localhost.crash ./xprobe_3dnow_2012-07-29-032200_localhost.crash ./xprobe_gas_x8632_2012-07-29-032158_localhost.crash
I've 3 kernel panic crashes:
new-host-2:Logs kenorb$ find . -name \*panic\*./DiagnosticReports/Kernel_2012-07-28-002413_kenorbs-MacBook-Air.panic./DiagnosticReports/Kernel_2012-07-29-233515_kenorbs-MacBook-Air.panic./DiagnosticReports/Kernel_2012-07-31-225733_kenorbs-MacBook-Air.panic
Like I said, it crashes every day, I could have more, but probably are removed, I don't know why.
Here are some few screenshots:
Activity Monitor:
top:
iotop: -
IPad Invision Smart function not working on iPad 3
Hi,
I have an iPad 2 and i also have the invison leather case with the smart wake function and it always worked great.
I now have a new iPad (3rd Gen) luckily it fits in the case, but the smart wake no longer works. I checked all the settings and they are correct but nothing.
At fist I thought my iPad was broken, but then I used a kitchen fridge magnet to simulate the smart cover and it worked perfectly! So do I conclue from this that the magnets in the new iPad need a stronger magnet to activate them?
Anyone found this?
Cheer
Benbensaunders wrote:
Hi,
I have an iPad 2 and i also have the invison leather case with the smart wake function and it always worked great.
I now have a new iPad (3rd Gen) luckily it fits in the case, but the smart wake no longer works. I checked all the settings and they are correct but nothing.
At fist I thought my iPad was broken, but then I used a kitchen fridge magnet to simulate the smart cover and it worked perfectly! So do I conclue from this that the magnets in the new iPad need a stronger magnet to activate them?
Anyone found this?
Cheer
Ben
I used the kitchen magnet trick, too, and found that the magnet in the rooCase I purchased is just slightly "off" the mark enough to not match up. It was "supposed" to work, but, in all honesty, how could they have known when the new iPad wasn't even on the market yet for them to try it?!? Leson learned, I guess........shouldn't have ordered that case before I had my iPad . -
Correct iPad video dimensions?
I am putting together a video presentation to be played on an iPad. I was under the impression that the iPad's video dimensions are 1280x720 - my video is therefore 1280x729 pixels... However, when I play it on the iPad, it is played with black bars top and bottom - the video doesn't fill the entire screen....
Clearly I'm doing something wrong somewhere - this is the first time I've done this - can someone please point me in the right direction!?
Thanks very much!Found the fix.
If the reboot doesn't fix it.
If the headphoens work find, but no external speakers.
If the double-click and page right to the software mute, doesn't show the sound knob - just the brightness
If your pop-up shows "Docking Station"
Then, the problem is very likely a dirty connector. The iPad/iPhone/iPod connector uses a resistor value to determine if the device is connected to an external 'speaker'. There are a range of resistances, for a range of products. This is known as the Connector Pin 21 issue.
Take some windex on a que-tip, or perhaps a Windex paper scrub and rub it on the bottom connector port. Somehow, "something" has gotten on those contacts, and it is pulling the voltage on pin #21 down - so that the iPad "thinks" it's connected to an external speaker - this will disable the internal speaker circuitry, as well as the internal speaker volume controls.
Do not over-saturate and short out your iPad. Do not throw it in the sink, do not use the kitchen faucet to flush it out. A Que-tip with a few drops of Windex (or other gentle cleaner) should work just fine. Takes all of 30 seconds - and magically, the volume knob appeared and everything worked just fine. -
I tried uninstall/install, debugging, changing everything for
securty and popups, i have not tried using a "kitchen sink". Now I
am getting a lot of script errors.I might just try to System
Restore before all the changes and if that doesn't work, go
flash-less. This needs to be fixed.Open Internet Explorer 10 on the desktop (not the Start screen). On the Tools menu, click Internet Options. (If you can't see the Tools menu, press the Alt button to display the menu bar.) On the Advanced tab, click to clear the Display a notification about every script error box.
Always tell us which computer you have when you post here. There is a label on the bottom.
-Jerry -
why when I am accessing the site www.sportlemon.tv (www.trombar.com) the video has no sound?
Found the fix.
If the reboot doesn't fix it.
If the headphoens work find, but no external speakers.
If the double-click and page right to the software mute, doesn't show the sound knob - just the brightness
If your pop-up shows "Docking Station"
Then, the problem is very likely a dirty connector. The iPad/iPhone/iPod connector uses a resistor value to determine if the device is connected to an external 'speaker'. There are a range of resistances, for a range of products. This is known as the Connector Pin 21 issue.
Take some windex on a que-tip, or perhaps a Windex paper scrub and rub it on the bottom connector port. Somehow, "something" has gotten on those contacts, and it is pulling the voltage on pin #21 down - so that the iPad "thinks" it's connected to an external speaker - this will disable the internal speaker circuitry, as well as the internal speaker volume controls.
Do not over-saturate and short out your iPad. Do not throw it in the sink, do not use the kitchen faucet to flush it out. A Que-tip with a few drops of Windex (or other gentle cleaner) should work just fine. Takes all of 30 seconds - and magically, the volume knob appeared and everything worked just fine. -
Is the rMBP extra sensitive to scratches?
Hello everybody,
When I bought my rMBP all was fine and dandy. Within a week I bought the Crumpler 15" Slip, hoping it would protect my screen from any scratches and stuff. After I bought and started using the slip I suddenly found some scratches on my screen. At first I thought it was a dead pixel but the guys from the Premium Reseller said it was a scratch. They wouldn't replace my screen, because scratches on the screen weren't part of the garantee.
Frustrated I went home, I payed 2500 euro's for my rMBP (incl. AppleCare). That said, a week later (still using the Slip) a big *** black beam running from the top to the bottom of the screen:
So now they would replace the screen at my Reseller. I was happy, the scratched "pixel" was replaced too.
A month later the same thing happened, a scratch in my screen. I didn't use my kitchen knife and started scratching the surface of my screen... This all started to raise some questions in my head. I found this article from Apple for example:
http://support.apple.com/kb/TS4384
Prior to this rMBP I had a MBP 13" and it survived a nuclear disaster without leaving a scratch (a "little" bit exaggerated). For real: I had it for 3 years, no scratch on my screen.
Now I'm a graphic designer and I need my screen to be spot on clean. The scratch is located in the middle of my canvas in i.e. Adobe Illustrator. To check if my colors are right, I always have to move the canvas around. Very frustrating!!
My question(s) to you all:
Are the rMBP screen more sensitive to scratches. Is a breadcrumb enough to create such a deep scratch that shows that well (like I said, looking like dead pixel)?
Is a scratch, that withholds me from doing my job efficiently, part of the AppleCare garantee?
Thanks everyone,
MerijnI also have a dead pixel sized scratch on my rMBP. Just found it today. Middle of my screen and anyoning. I'm sure I will get used to it but after paying $3000USD for it just 3.5 months ago has got me fustrated. I got this screen because I am photographer and wanted that extra resolution. This screen does seem more sensitive than others I have had. My previous laptops seem like they went at least a year without a nick in the screen.
As for the AppleCare portion of the question, I am not sure. Would love to know.
Best,
P -
I am having trouble with sound on my iPad
I am having trouble with sound on my iPad
Found the fix.
If the reboot doesn't fix it.
If the headphoens work find, but no external speakers.
If the double-click and page right to the software mute, doesn't show the sound knob - just the brightness
If your pop-up shows "Docking Station"
Then, the problem is very likely a dirty connector. The iPad/iPhone/iPod connector uses a resistor value to determine if the device is connected to an external 'speaker'. There are a range of resistances, for a range of products. This is known as the Connector Pin 21 issue.
Take some windex on a que-tip, or perhaps a Windex paper scrub and rub it on the bottom connector port. Somehow, "something" has gotten on those contacts, and it is pulling the voltage on pin #21 down - so that the iPad "thinks" it's connected to an external speaker - this will disable the internal speaker circuitry, as well as the internal speaker volume controls.
Do not over-saturate and short out your iPad. Do not throw it in the sink, do not use the kitchen faucet to flush it out. A Que-tip with a few drops of Windex (or other gentle cleaner) should work just fine. Takes all of 30 seconds - and magically, the volume knob appeared and everything worked just fine. -
Converting HDV 1080/60i to ???1080 at 30p?
I just cut a music video, HDV 1080i 29.97 fps. The first application for it is the web. I'd like to output it as 29.97 fps 'progressive' with the highest quality possible. I believe Compressor is the way to go ... but I'm not quite sure what the best settings should be, and what final codec should I export to.
I'm actually going to use DV Kitchen to do all the web versions, once I have a master. But I have the sneaking suspicion (I've inquired on their forum, waiting for a response) that DV Kitchen doesn't yet handle ProRes ... thus my question about what codec I might export to.
All ears,
BenBen,
Check out this link:
http://vimeo.com/forums/topic:3671
http://vimeo.com/help/compression
You might find some helpful information there, even if you are not uploading to Vimeo, the tutorials are very useful for uploading to any site which handles HD videos. -
hi i need to get the rate field . ( konv-kbetr)
but i am not gettting some unique key to get it from the data i already have. do i need to get some more table . here is what i have
DATA:begin of itab occurs 0,
kunag like vbrk-kunag,
augru_auft like vbrp-augru_auft,
matnr like vbrp-matnr,
fkdat like vbrk-fkdat,
vbtyp like vbrk-vbtyp,
fksto like vbrk-fksto,
knumv like vbrk-knumv,
gjahr like vbrk-gjahr,
vbeln like vbrk-vbeln,
posnr like vbrp-posnr,
arktx like vbrp-arktx,
vrkme like vbrp-vrkme,
fkimg like vbrp-fkimg,
netwr like vbrp-netwr,
kostl like vbrp-kostl,
name1 like kna1-name1,
kdmat like vbap-kdmat,
kzwi1 like vbrp-kzwi1,
end of itab.
SELECT *
FROM vbrk
INNER JOIN vbrp ON vbrkvbeln = vbrpvbeln
INNER JOIN kna1 ON vbrkkunag = kna1kunnr
INTO corresponding fields of TABLE itab
where
vbrkvbeln in p_vbeln and vbrkkunag in p_kunag and vbrpmatnr in p_matnr and vbrpaugru_auft in p_augru
and vbrk~fkdat in p_fkdat
And vbrk~vbtyp IN ('M', 'P', 'O')
And vbrk~fksto NE 'X'.
sort itab by kunag augru_auft matnr.
loop at itab.
select kbetr
from konv
into itab1-kbetr
where knumv = itab-knumv.
endselect.
but this wont work coz there are many kbetr for the one corespondding knumv.
please help.Look for example report and i am getting material price from a004 and konp table.
REPORT ZMM_KITCHEN_COST no standard page heading
line-size 255
message-id zwave .
======================================================================
Program Name : ZMM_KITCHEN_COST *
Description : This Program is SAP List Viewer Program *
This Program would be used for Kitchen cost report *
from table MARA,MARC,MBEW and KONP *
Author : Seshu *
Date : 08/04/2006 *
MODIFICATION HISTORY *
DATE | AUTHOR | CHANGE # | DESCRIPTION OF MODIFICATION *
--|||--
09/15/06| Seshu | DEVK921591 | ALV Interactive to MD04 *
09/18/06| Seshu | DEVK921599 | Added Price unit in MBEW *
09/18/06| Seshu | DEVK921601 | Added price unit to all fields *
09/28/06| Seshu | DEVK921624 | Added Material Status field *
01/09/06| Seshu | DEVK921949 | Added Unit of measure field *
======================================================================
type-pools
type-pools : slis.
Tables
tables : mara,
makt,
mbew,
konp,
pgmi,
marc,
RMCP3,
sscrfields,
mvke.
Internal Table for MARC and MARA
data : begin of i_join occurs 0,
matnr like mara-matnr, " Material #
meins like mara-meins, " Unit of Measure
werks like marc-werks, " Plant
zzdept like marc-zzdept," Department
end of i_join.
Internal table for PGMI
data : begin of i_pgmi occurs 0,
werks like pgmi-werks, " Plant,
nrmit like pgmi-nrmit, " Material #
wemit like pgmi-wemit, " Plant
end of i_pgmi.
Internal Table for MBEW
data i_mbew like mbew occurs 0 with header line.
Internal Table for Output
data : begin of i_output occurs 0 ,
matnr like mara-matnr, " Material #
maktx like makt-maktx, " Material Desc
VPRSV like mbew-VPRSV, " Price Control Indicator
VERPR like mbew-VERPR, " Moving Avg Price
meins like mara-meins, " Base Unit of Measure
STPRS like mbew-STPRS, " Standard Price
LPLPR like mbew-LPLPR, " Current Planned Price
ZPLPR like mbew-ZPLPR, " Future Planned Price
VPLPR like mbew-VPLPR, " Previous Planned Price
kbetr like konp-kbetr, " Sales Price
KMEIN like konp-KMEIN, " Sales Unit
margin(5) type p decimals 2,
vmsta like mvke-vmsta, " Material Status.
end of i_output.
Internal Table for A004
data : i_a004 like a004 occurs 0 with header line.
Variables
data : wa_lines type i,
wa_maktx type makt-maktx,
v_flag type c.
ALV Function Module Variables
DATA: g_repid like sy-repid,
gs_layout type slis_layout_alv,
g_exit_caused_by_caller,
gs_exit_caused_by_user type slis_exit_by_user.
DATA: gt_fieldcat type slis_t_fieldcat_alv,
gs_print type slis_print_alv,
gt_events type slis_t_event,
gt_list_top_of_page type slis_t_listheader,
g_status_set type slis_formname value 'PF_STATUS_SET',
g_user_command type slis_formname value 'USER_COMMAND',
g_top_of_page type slis_formname value 'TOP_OF_PAGE',
g_top_of_list type slis_formname value 'TOP_OF_LIST',
g_end_of_list type slis_formname value 'END_OF_LIST',
g_variant LIKE disvariant,
g_save(1) TYPE c,
g_tabname_header TYPE slis_tabname,
g_tabname_item TYPE slis_tabname,
g_exit(1) TYPE c,
gx_variant LIKE disvariant.
data : gr_layout_bck type slis_layout_alv.
Selection-screen
selection-screen : begin of block blk with frame title text-001.
parameters : p_werks like marc-werks default '1000' obligatory.
select-options : s_dept for marc-zzdept obligatory,
s_matnr for mara-matnr,
s_mtart for mara-mtart,
s_vprsv for mbew-VPRSV,
s_PRGRP for RMCP3-PRGRP MATCHCODE OBJECT MAT2 ,
s_vmsta for mvke-vmsta.
selection-screen: end of block blk.
*SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
*PARAMETERS: p_vari LIKE disvariant-variant.
*SELECTION-SCREEN END OF BLOCK b3.
At slection screen events *
*-- Process on value request
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
PERFORM f4_for_variant.
Initialization *
Initialization.
g_repid = sy-repid.
sscrfields-functxt_01 = 'Clear Selection'.
selection-screen function key 1.
AT SELECTION-SCREEN.
case sscrfields-ucomm.
when 'Clear Selection' or 'FC01'.
clear: s_matnr,
p_werks.
refresh: s_matnr,
s_dept,
s_mtart,
s_vprsv,
s_PRGRP,
s_vmsta.
endcase.
Start-of-selection.
start-of-selection.
Clear the all data.
perform clear_data.
Get the data from PGMI Table
perform get_pgmi.
Get the data from MARC and MARA Table
perform get_mara_marc.
Get the data from MBEW Table
perform get_mbew.
Move the data into OUTPUT Table
perform move_output_internal.
*end-of-selection.
end-of-selection.
if not i_output[] is initial.
ALV Function Module
perform print_alv.
endif.
*& Form get_pgmi
Select the data from PGMI Table
FORM get_pgmi.
clear v_flag.
If Product group has a value at Selection-screen.
if not s_prgrp is initial.
select werks nrmit wemit from pgmi into table i_pgmi
where prgrp in s_prgrp
and werks = p_werks
and wemit = p_werks.
v_flag = 'X'.
endif.
ENDFORM. " get_pgmi
*& Form get_mara_marc
Select the data from MARA and MARC
FORM get_mara_marc.
if v_flag = 'X'.
select amatnr ameins bwerks bzzdept into table i_join
from mara as a inner join marc as b on amatnr = bmatnr
for all entries in i_pgmi
where a~matnr in s_matnr
and b~werks = p_werks
and b~zzdept in s_dept
and a~mtart in s_mtart
and a~matnr = i_pgmi-nrmit
and b~werks = i_pgmi-werks.
else.
Get the data from MARA and MARC Table
select amatnr ameins bwerks bzzdept into table i_join
from mara as a inner join marc as b on amatnr = bmatnr
where a~matnr in s_matnr
and b~werks = p_werks
and b~zzdept in s_dept
and a~mtart in s_mtart.
endif.
clear wa_lines.
describe table i_join lines wa_lines.
if wa_lines is initial.
message i000(zwave) with 'List contains no data'.
stop.
endif.
sort i_join by matnr werks zzdept.
ENDFORM. " get_mara_marc
*& Form get_mbew
Select the data from MBEW Table
FORM get_mbew.
Get the data from MBEW.
select * from mbew into table i_mbew
for all entries in i_join
where matnr = i_join-matnr.
clear wa_lines.
describe table i_mbew lines wa_lines.
if wa_lines is initial.
message i000(zwave) with 'List contains no data'.
stop.
endif.
sort i_mbew by matnr bwkey.
ENDFORM. " get_mbew
*& Form move_output_internal
Final Results
FORM move_output_internal.
loop at i_join.
clear wa_maktx.
Compare the data with MVKE Table
select single vmsta from mvke into mvke-vmsta
where matnr = i_join-matnr
and vkorg = '0001'
and vtweg = '01'
and vmsta in s_vmsta.
if sy-subrc ne 0.
continue.
else.
i_output-vmsta = mvke-vmsta.
endif.
read table i_mbew with key matnr = i_join-matnr
bwkey = i_join-werks
binary search.
if sy-subrc eq 0.
Price Control Indicator
i_output-VPRSV = i_mbew-VPRSV.
Moving Average Price
i_output-VERPR = i_mbew-VERPR / i_mbew-peinh.
Standard Price
i_output-STPRS = i_mbew-STPRS / i_mbew-peinh.
Current Planned Price
i_output-LPLPR = i_mbew-LPLPR / i_mbew-peinh.
Future Planned Price
i_output-ZPLPR = i_mbew-ZPLPR / i_mbew-peinh.
Previous Planned Price
i_output-VPLPR = i_mbew-VPLPR / i_mbew-peinh.
Base Unit of Measure - Added by Seshu 01/09/2007
i_output-meins = i_join-meins.
else.
continue.
endif.
Get the sales Price.
perform get_sales_data.
if i_mbew-VPRSV = 'V'.
Get the Percentage of Margin
if i_output-kbetr ne '0.00'.
i_output-margin = ( ( i_output-kbetr - i_mbew-VERPR )
/ i_output-kbetr ) * 100 .
endif.
else.
Get the Percentage of Margin
if i_output-kbetr ne '0.00'.
i_output-margin = ( ( i_output-kbetr - i_output-stprs )
/ i_output-kbetr ) * 100 .
endif.
endif.
Get the material Description from MAKT Table
select single maktx from makt into wa_maktx
where matnr = i_join-matnr
and spras = 'E'.
if sy-subrc eq 0.
i_output-matnr = i_join-matnr.
i_output-maktx = wa_maktx.
endif.
append i_output.
clear : i_output,
i_join,
i_mbew.
endloop.
ENDFORM. " move_output_internal
*& Form get_sales_data
Get the Sales Price for each material
FORM get_sales_data.
Get the data from A004 table to get KNUMH
Added new field Sales Unit - Seshu 01/09/2006
refresh : i_a004.
clear : i_a004.
data : lv_kbetr like konp-kbetr," Condition value
lv_KPEIN like konp-kpein , "per
lv_KMEIN like konp-KMEIN. " Sales Unit
select * from a004 into table i_a004
where matnr = i_join-matnr
and vkorg = '0001'
and vtweg = '01'.
if sy-subrc eq 0.
sort i_a004 by DATAB descending.
Get the Latetest Date
read table i_a004 with key matnr = i_join-matnr
vkorg = '0001'
vtweg = '01'
binary search.
Get the Sales Value
select single kbetr KPEIN KMEIN from konp
into (lv_kbetr,lv_KPEIN, lv_KMEIN)
where knumh = i_a004-knumh
and kappl = i_a004-kappl
and kschl = i_a004-kschl.
if sy-subrc eq 0.
i_output-kbetr = lv_kbetr / lv_KPEIN.
i_output-KMEIN = lv_KMEIN.
endif.
endif.
clear : lv_kbetr,
lv_kpein,
lv_KMEIN.
ENDFORM. " get_sales_data
*& Form print_alv
ALV Function Module
FORM print_alv.
Fill the Fiedlcat
PERFORM fieldcat_init using gt_fieldcat[].
gr_layout_bck-edit_mode = 'D'.
gr_layout_bck-colwidth_optimize = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = g_repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = g_user_command
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT = gr_layout_bck
IT_FIELDCAT = gt_fieldcat[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = g_save
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IT_ALV_GRAPHICS =
IT_ADD_FIELDCAT =
IT_HYPERLINK =
I_HTML_HEIGHT_TOP =
I_HTML_HEIGHT_END =
IT_EXCEPT_QINFO =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = i_output
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " print_alv
*& Form fieldcat_init
Fieldcat
FORM fieldcat_init USING e01_lt_fieldcat type slis_t_fieldcat_alv.
DATA: LS_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
Material #
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'MATNR'.
LS_FIELDCAT-ref_fieldname = 'MATNR'.
LS_FIELDCAT-ref_tabname = 'MARA'.
LS_FIELDCAT-TABNAME = 'I_OUTPUT'.
ls_fieldcat-seltext_L = 'Material'.
ls_fieldcat-seltext_M = 'Material'.
ls_fieldcat-seltext_S = 'Material'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
Material Description
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'MAKTX'.
LS_FIELDCAT-OUTPUTLEN = 35.
LS_FIELDCAT-TABNAME = 'I_OUTPUT'.
ls_fieldcat-seltext_L = 'Description'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
Price Indicator
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'VPRSV'.
LS_FIELDCAT-OUTPUTLEN = 7.
LS_FIELDCAT-TABNAME = 'I_OUTPUT'.
ls_fieldcat-seltext_L = 'Price Control Indicator'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
Moving Avg Price
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'VERPR'.
LS_FIELDCAT-OUTPUTLEN = 11.
LS_FIELDCAT-TABNAME = 'I_OUTPUT'.
ls_fieldcat-seltext_L = 'Moving Avg Price'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
Base Unit of Measure
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'MEINS'.
LS_FIELDCAT-OUTPUTLEN = 7.
LS_FIELDCAT-TABNAME = 'I_OUTPUT'.
ls_fieldcat-seltext_L = 'Base Unit'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
Standard Price
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'STPRS'.
LS_FIELDCAT-OUTPUTLEN = 11.
LS_FIELDCAT-TABNAME = 'I_OUTPUT'.
ls_fieldcat-seltext_L = 'Standard Price'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
Current Planned Price
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'LPLPR'.
LS_FIELDCAT-OUTPUTLEN = 11.
LS_FIELDCAT-TABNAME = 'I_OUTPUT'.
ls_fieldcat-seltext_L = 'Current Planned Price'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
Future Planned Price
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'ZPLPR'.
LS_FIELDCAT-OUTPUTLEN = 11.
LS_FIELDCAT-TABNAME = 'I_OUTPUT'.
ls_fieldcat-seltext_L = 'Future Planned Price'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
Previous Planned Price
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'VPLPR'.
LS_FIELDCAT-OUTPUTLEN = 11.
LS_FIELDCAT-TABNAME = 'I_OUTPUT'.
ls_fieldcat-seltext_L = 'Previous Planned Price'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
Sales Price
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'KBETR'.
LS_FIELDCAT-OUTPUTLEN = 13.
LS_FIELDCAT-TABNAME = 'I_OUTPUT'.
ls_fieldcat-seltext_L = 'Sales Price'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
Sales Unit
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'KMEIN'.
LS_FIELDCAT-OUTPUTLEN = 7.
LS_FIELDCAT-TABNAME = 'I_OUTPUT'.
ls_fieldcat-seltext_L = 'Sales Unit'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
% of Gross Margin
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'MARGIN'.
LS_FIELDCAT-OUTPUTLEN = 13.
LS_FIELDCAT-TABNAME = 'I_OUTPUT'.
ls_fieldcat-seltext_L = '% of Gross Margin'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
Material Status
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'VMSTA'.
LS_FIELDCAT-OUTPUTLEN = 13.
LS_FIELDCAT-TABNAME = 'I_OUTPUT'.
ls_fieldcat-seltext_L = 'Material Status'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
ENDFORM. " fieldcat_init
**& Form f4_for_variant
text
*FORM f4_for_variant.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
EXPORTING
is_variant = g_variant
i_save = g_save
i_tabname_header = g_tabname_header
i_tabname_item = g_tabname_item
it_default_fieldcat =
IMPORTING
e_exit = g_exit
es_variant = gx_variant
EXCEPTIONS
not_found = 2.
IF sy-subrc = 2.
MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
IF g_exit = space.
p_vari = gx_variant-variant.
ENDIF.
ENDIF.
*ENDFORM. " f4_for_variant
*& Form clear_data
Clear the Internal table
FORM clear_data.
clear : i_output,
i_join,
i_mbew,
i_a004,
i_pgmi.
refresh : i_output,
i_join,
i_mbew,
i_a004,
i_pgmi.
ENDFORM. " clear_data
FORM USER_COMMAND *
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield. "#EC CALLED
CASE R_UCOMM.
WHEN '&IC1'.
read table i_output index rs_selfield-tabindex.
SET PARAMETER ID 'MAT' FIELD i_output-matnr.
SET PARAMETER ID 'WRK' FIELD p_werks.
if not i_output-matnr is initial.
call transaction 'MD04' and skip first screen.
endif.
ENDCASE.
ENDFORM. -
IPad video camera has no sound
iPad video camera has no sound
Found the fix.
If the reboot doesn't fix it.
If the headphoens work find, but no external speakers.
If the double-click and page right to the software mute, doesn't show the sound knob - just the brightness
If your pop-up shows "Docking Station"
Then, the problem is very likely a dirty connector. The iPad/iPhone/iPod connector uses a resistor value to determine if the device is connected to an external 'speaker'. There are a range of resistances, for a range of products. This is known as the Connector Pin 21 issue.
Take some windex on a que-tip, or perhaps a Windex paper scrub and rub it on the bottom connector port. Somehow, "something" has gotten on those contacts, and it is pulling the voltage on pin #21 down - so that the iPad "thinks" it's connected to an external speaker - this will disable the internal speaker circuitry, as well as the internal speaker volume controls.
Do not over-saturate and short out your iPad. Do not throw it in the sink, do not use the kitchen faucet to flush it out. A Que-tip with a few drops of Windex (or other gentle cleaner) should work just fine. Takes all of 30 seconds - and magically, the volume knob appeared and everything worked just fine. -
Playing h.264 through the Flash player?
I want to take h.264 videos from FCP and play them on the web. I have heard there is a way to change the extension of the .mov file to .flv so that it plays through a Flash player.
1.) If I change h.264 file extension to .flv, how do you also make the same file available as a download for iPod and through iTunes as a podcast?
Thanks.stanwelks,
I just went through this. It was recommended that I check out DV Kitchen. http://www.dvcreators.net/dv-kitchen/
My problem was that the only people who were able to view my video were mac users, and pc users who were brave enough to install whatever. I wanted to close this gap a little.
Without having to change any of my already uploaded QT H.264 files, I simply used DV Kitchen to create html code that calls up a specified flash player. Pretty straight forward
I'm on the trial version, but I may buy this, $80 US.
Let us know how that works out.
Jonathan -
Can I download an earlier version due to apps not working with 4 & 5 ?
My computer got a virus, and in the process of fixing the problem, my Firefox version ( 3.6 ) was deleted. I was using this earlier version of Firefox pre-Firefox 4 & pre-Firefox 5. I did not upgrade because a service I was using ( IKEA kitchen planning ) is not enabled for 4 or 5 at this time. The IKEA planning site is very important & necessary for me at this time.
ThanksFirst, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, get the Firefox 3.6 installer here: http://www.mozilla.com/firefox/all-older
You should be able to install Firefox 3.6 over whatever later version you installed. If you do choose to uninstall first, do ''not'' remove your personal data and settings, just the program.
Unless you have installed an incompatible add-on, Firefox 3.6 should pick up where you left off. If there are serious issues, please post back with details.
Note: I haven't actually tried this myself!
Maybe you are looking for
-
Yosemite and Time capsule not working?
I just started using Yosemite on my mac book pro laptop and my mac desktop. Time machine has been fine on my desktop with my external drive which is plugged into the computer. I had no problem with new backups. But, I can't get time machine to work w
-
Feature Request: Line Number on Syntax Error
Hi, When I execute a query in the query window and there is a syntax error, I don't get the line number of where the error is as I normally do in SQLPlus. Is this this something that can be added to the error message? thanks -Niels
-
Problem in Events (Create and Change)
Hi all, I have developed a worlflow for transaction FV50. Now the problem is that when i create a parking document a mali is sent to approver for approval. Now suppose if approver doesn't do any action on the workitem which he had in his inbox and in
-
How to change workspace ownership
Hi, the owner of a beehiveonline workspace left the company. Is there a way to change the ownership for this workspace or add an administrator? thanks, Claudio
-
Yesterday I synced my iphone and didn't read a messsage properly on screen about changes to calendar and choose yes - turns out this was a mistake as it deleted my entire calendar from iphone and then from outlook. I have restored from backup (sever