Using enter as default key

hi all,
i cant seem to find a way to set enter as the default key for UID="1" in XML.
in SAP when you press enter it automaticaly activates the add, close, update button. so i was wondering what more you need to do besides setting the button as UID="1"??
many thanks,
C. Oude Luttikhuis

Oude,
May i understand your question r not i dont knw but i think that u want to set the enter button as default. For that in XML file u want to set the property default_button="1" in form property
If it helps give reward points,
Regards,
Anitha

Similar Messages

My new smart TV recognizes my network, & asks, "Please enter you WEP keys (10 or 26 hex digits)" but my netwotk uses a password of 6 characters. How can I get my smart TV to connect to my network?

I have a current iMac with the latest OS update.
My new smart TV recognizes my network, & asks, “Please enter your WEP keys (10 or 26 hex digits). My Airport Express, an early model, only requires a password of less than 10 characters.
When I open “airport utility,”on my iMac it tells me this version doesn’t support my base station & says go to “Airport Service & Support.” That’s what got me here.
My earlier MacBook runs OS 10.6.8. Its version of Airport Utility works. Its Airport ID has 17 characters, & uses the same password to access the internet, but it also has a “wireless password” of 26 characters, but only shows me the dots. i haven’t the foggiest notion what the characters are, if I put them in there years ago when i did the original configuration, or if they got there otherwise..
I’m afraid of changing those settings for fear that I’l mess up the whole thing.
How can I get my smart TV to connect to my network, ?

Please check out the following AirPort User Tip on how to recover AirPort passwords.

Using Enter key to submit a form, Attn: Didier

Hi,
I have an ADF form on my page and want to use Enter key to submit the form. I submit the form using a CommandLink which has a method bound to it as its action in a managed bean. I have set submitCL as the Id of this CommandLink and has set this in my form:
<af:form defaultCommand="submitCL">
but the Enter does not work. I'm using IE 7.0 and JDeveloper 10.1.3.2.
Thanks in advance,
S/\EE|)

Hi Saeed,
not sure if this is related or not, but I would test it with another browser as IE is not supported. See http://www.oracle.com/technology/products/jdev/htdocs/10.1.3.3/install.html#browsers
Also, when the command button is in the header facet of a table or treeTable, the value of defaultCommand must also contain the table or treeTable ID.
For example: <af:form defaultCommand="theTreeTableId:submitCL" ...>Regards,
Didier.

Why I cannot tab to enter instead of using enter key?

For example. When I want to log in a website that I have an account. After typing username and password, I can not tab by trackpad to enter. I have to use enter key to login. Why? Have how to fix that?

Does your cursor work? I take it this is only a problem at login. You can move the cursor,but nothing happens when you try clicking on it? Have you tried a pram reset. Command/Option/P/R keys at startup for three chimes.

Navigation in multi row field using ENTER key

Contents of the field are deleted when I use ENTER key in a multi line field.
Any solution?

<BLOCKQUOTE>quote:<HR>Originally posted by Nadeem Ameer ():
Contents of the field are deleted when I use ENTER key in a multi line field.
Any solution?<HR></BLOCKQUOTE>
the normal that when you press an Enter key
in a field which is a multi line field the cursor is moving to the next line.
sol:verify that you don't write any wrong code in the key-enter trigger
& check that you set the multi_line property of that item to yes.
null

Problem changing default key bindings using Oracle Terminal

Hello,
I'm facing a problem changing default key bindings using Oracle Terminal. I changed
some bindings, saved them in forms60/fmrusw.res, started the generation and saved again.
I thought that's it but it wasn't. It took no effect at all in Forms (even after recompilation) although reopening the file in Terminal showed the changes. I'm using Forms in German, which means that even the key bindings displayed in Forms are translated i.e. STRG+F1 instead if CTRL+F1,
but I can't find a german version of this resource file, so i think it's the same resource file for all supported languages. But what is needed for the changes to take effect ?
Thanks in advance
STD
null

Hi,
is it client/server you are working?
if so you should not be using the fmrusw.res file because I guess your NLS_LANG is German_Germany.WE8ISO8859P1 or something like that. This means the terminal that is being opened is fmrdw.res instead of fmrusw.res and this file should be edited using Oracle Terminal.
if you are working via the web implementation than you can open the file fmrweb.res in a text editor and change the keybindings in there. If you need to have the PC like key bindings on the web just open the fmrpcweb.res and see if it contains the German texts. If so you can either copy this file over the frmweb.res file or you can specify term=fmrpcweb.res in the serverargs parameter.
Hope this helps.
Kind regards,
Frank van der Borden
Oracle Support Services
Netherlands

I purchased microsoft office 2011. I have downloaded and installed the software but at no time was I prompted to enter my product key. As a result I am unable to use the software. Please help me activate the software. Thanks

I purchased downloaded and installed microsoft office 2011 onto my iMac. At no time was I prompted to enter the product key so I am unable to activate the software. Can anyone tell me what to do in order to activate the software?

Welcome to Apple Support Communities
Where did you download Office for Mac? If you downloaded it from Microsoft, read > http://support.microsoft.com/kb/2391941/en-us

Default key date, Document date and posting date needs to be changed automa

Hi Experts,
The user wants to create a variant for Foreign currency valuation, wherein the default key date, Doc date and Posting date needs to be changed every month automatically. Is it possible?
Please let me know your thoughts.
Warm regards,
Murukan Arunachalam

Hi
Please follow this process.
Only specify fields that should be changed
Select these fields by entering an X in the checkboxes
Enter a U in the UPDATEFLAG field
Always specify key fields when changing the data, including in the checkboxes
The configuration is an exception here. If this needs to be changed, you need to complete it again fully.
Maintain quantities and dates in the schedule line data.
1. Minimum entry:
You must enter the order number in the SALESDOCUMENT structure.
You must always enter key fields for changes.
You must always specify the update indicator in the ORDER_HEADER_INX.
2. Commit control:
The BAPI does not run a database Commit, which means that the application must trigger the Commit so that the changes are read to the database. To do this, use the BAPI_TRANSACTION_COMMIT BAPI.

InDesign CS5 - Enter and Return keys give unexpected results

I've been using CS5 for just a few days (Mac Pro, Mac OS X 10.6.3). I've noticed that the Enter and Return keys aren't always behaving as expected. Enter doesn't give me a column break, shift-Return doesn't give me a line break but a new paragraph, and more often than not I can't select the default option in a dialog with either Return or Enter. I've just read cpsid_84345, which says this is an issue in German and Swedish language versions, but I'm using English. The 7.01 update doesn't seem to be available. Any advice?

That the KBSC files are XML doesn't guarantee faultless migration from one version to the next, probably because Adobe just forgot to cope with importing KBSCs from previous versions. It's great that InDesign offers you such flexibility with the KBSCs, but it's terrible that the implementation has been so sloppy in at least the three last versions (maybe earlier versions, too, but I try to repress the memories).
Some people have been asking Adobe to make KBSCs scriptable. This would enably you to maintain a small database with KBSCs which a script could read and feed into a new version of InDesign, or redo a KBSC file after it has become corrupt, or whatever minor or major mishap.
The more people ask for this the better: go to http://www.adobe.com/support/feature.html and request script access to the KBSCs.
Peter

How to enter a Private key into a keystore

Hi,
We have a propriteary CA, developed by us. I need to use this CA for my Signed Applet. I would enter this CA's public key(a X509 certificate) into my cacerts file.
Following is what I have done :
1) I have generated my own keystore, public and private key for signing the applet.
2) Signed the applet with the private key in the keystore.
To Do :
Now, the self generated public key(with which applet was signed) has to be signed by the properitary CA, so that when applet is downloaded my certificate is authenticated by the proprietary CA.
The problem is :
1) To get my public key certificate authenticated by the proprietary CA, I need the private key of proprietary CA.(so that I shall sign my public key file by the CA's private key) . The CA could give the private key as a byte array file. ( Or we could write a program to format the private key file, if any format exists and required). jarsigner requires keystore to sign. How could I create a keystore and enter my private key and public key into this keystore?
2) Is there any other way to do this?
Please help to resolve this problem.
Rajesh

Check this:
<A HREF="http://java.sun.com/j2se/1.4/docs/guide/pugin/developer_guide/rsa_signing.html

FMS on Amazon Web Services License. Does it need enter License(Serial Key)?

FMS on Amazon Web Services License. Does it need enter License(Serial Key)?
After Subscribe on adobe.com(Adobe Flash Media Server 4.5 on Amazon Web Services)
I build the Amazon EC2 successfully.
In amazonpayments, the amazon show me an Activation Key.
On Application Activation:
The screen give me following information.
Generate an Amazon Activation Key
An activation key may be required as part of an application's registration process. If your application requires it, follow the steps below:
Step 1: Click on the Generate Key link to generate an activation key for an application.
Step 2: Copy the activation key.
Step 3: Click on Go to Application to access the application.
Step 4: Paste the activation key if and where the application specifies.
But in Adobe Flash Media Administration console, It is missing the License(Serial Key)
Does it need enter License(Serial Key)?
How can I use the Activation Key?

Hi,
This Activation Key is only for identification purposes. In most cases, you will not have to use it. Once you subscribe to FMS on AWS, you are ready to go and use FMS AMI's.
Also, FMS on AWS does NOT require any License or Key. It works on a separate Licensing model.
Thanks!

Default key in internal tables

what is 'Default key'? for what type of internal tables it is used? Can you please explain with examples?
Thanks a lot.

Key
The key identifies table rows. There are two kinds of key for internal tables - the standard key and a user-defined key. You can specify whether the key should be UNIQUE or NON-UNIQUE. Internal tables with a unique key cannot contain duplicate entries. The uniqueness depends on the table access method.
At tables with structured row type, the standard key is formed from all character-type columns of the internal table. If a table has an elementary line type, the default key is the entire line. The default key of an internal table whose line type is an internal table, the default key is empty. At tables with non-structured row type, the standard key consists of the entire row. If the row type is also a table, an empty key is defined.
The user-defined key can contain any columns of the internal table that are no internal table themselves, and do not contain internal tables. References are allowed as table keys. Internal tables with a user-defined key are called key tables. When you define the key, the sequence of the key fields is significant. You should remember this, for example, if you intend to sort the table according to the key.
Regards,
Rich Heilman

Enter and shift keys not working. HELP!!!

A few days ago my mouse started behaving erratically all of a sudden. It would move by itself, click apps, and switch tabs rapidly all on its own. I've had this computer for over 2 years and this has never happened before. Restarting and rebooting into safe mode didn't work, but one user suggested a PRAM reset and that fixed the mouse problem. However, my enter and shift key on the right side do not work now (this is much less annoying than the mouse problem, but still very inconvenient!). Restarting the computer and doing another PRAM reset doesn't work unfortunately. I also used the keyboard viewer to confirm that all but those two keys work. I don't think the issue is with keyboard lint because both keys worked fine before I tried the reset. Booting up in safe mode also doesn't fix the problem. It would be great if I could find a way to fix this here since I won't be able to go to an Apple genius bar until December!

Hello sandi3s,
The troubleshooting detailed below may help restore functionality to your MacBook Pro's keyboard.
Some keys don't work as expected
From the Apple menu, choose System Preferences.
From the View menu, choose Speech.
Click the Text to Speech tab.
If "Speak selected text when the key is pressed" is enabled, the key or key combination set to speak text cannot be used for other purposes or used to type text--click Set Key and change it to a less-commonly used key combination (try to use modifier keys such as Shift, Command, Option, and Control). Or, disable the "Speak selected text when the key is pressed" option.
Click the Accessibilty or Universal Access pane in System Preferences, then click the Keyboard tab.
Make sure that Slow Keys is turned off. With Slow Keys on, you need to press a key for a longer period of time for it to be recognized.
In the Accessibilty or Universal Access pane, click the Mouse tab, and make sure Mouse Keys is turned off. With Mouse Keys enabled, you cannot use the Numeric Keypad to enter numbers--instead the keypad moves the pointer (cursor). (There is an option to enable Mouse Keys with five presses of the Option key; you may want to turn that option off to avoid accidentally enabling it.) If Mouse Keys is enabled and you are using a keyboard with no numeric keypad or Num Lock function, see Unable to type while Mouse Keys is enabled in Mac OS X.
If the function keys on the top row of the keyboard are not working as expected, see Mac OS X: How to change the behavior of function keys.
If the issue persists, use Keyboard Viewer to help isolate the issue:Start from the Mac OS X Install Disc, choose Terminal from the Utilities menu and test the keys which were previously not working. If the keys work while started from the Install disc, then the keyboard itself is working correctly. Use How to troubleshoot a software issue to isolate the software issue that may be causing the keys to not respond.
Click the Language & Text pane (Mac OS X v10.6) or International pane (Mac OS X v10.5.8 or earlier) in System Preferences.
Click the Input Sources tab (or Input Menu tab in Mac OS X 10.5.8 or earlier).
Click the Keyboard & Character Viewer "On" checkbox to select it (click the Keyboard Viewer "On" checkbox in Mac OS X 10.5.8 or earlier).
From the Input (flag) menu, choose Show Keyboard Viewer.
If the keyboard is connected and detected by OS X, the keys you type will highlight in the Keyboard Viewer window. Open TextEdit (or any text application), and try to type something using the keys that were previously not responding to see if they highlight in Keyboard Viewer.
One or more keys on the keyboard do not respond
http://support.apple.com/kb/TS1381
Cheers,
Allen

How do I let user enter a primary key value on a form

I'm creating my first APEX application. I have a simple table called HOSTS with 2 columns HOSTNAME and IP_ADDRESS. HOSTNAME is the primary key for the table. HOSTNAME is a perfectly acceptable primary key and I don’t wish to create an additional column to be populated by a sequence.
What are my options for creating a form on the table without using "Existing trigger", "Custom PL/SQL function" or "Existing Sequence" to populate the primary key column, i.e. HOSTNAME, so that the user can enter a value for the primary key?
Any assistance greatly appreciated.
Gavin

The debate about natural keys versus surrogate keys
will no doubt continue with advocates for both sides.
However there is also a difference between
'making your life easier' for APEX development and
'making your life more difficult' by having to
analyse, implement and deploy a surrogate key only
approach to an existing database which employs both
natural keys and surrogate keys.
hould we be forced to change the database design
because a development tool does not cater for natural
primary keys?The application development product is TRYING to save you from shooting yourself in the foot. The idea is to separate the primary key from being accessed by the user or ANY carbon based unit.. The key is mainly used by the system to join and lookup data rows, not for people to change whenever they decide that the key is WRONG.
Think about this, if you use Last Name as a key in your system (a bad idea to begin with since this is NOT a unique id when you have two Smiths). When a person needs to change this because Jimmy Smith is NOT the only Smith working for Acme Toys, you have to cascade that change through all the child tables related to the main person table.
If instead you use a system generated key, no change will be required since the key has NO relation to the data other than it represents a pointer to that row of data.
Works for me, since I do not want to write all the supporting code when APEX builds it for you...
Thank you,
Tony Miller
UTMB/EHN

SelectionChange for enter and backspace keys

Hello all,
Our VSTO addin needs to know the current selection so we can sync our taskpane with current selection. We are using the SelectionChanged event to register our taskpane synch routine. The problem is that this event doesn't fire on Enter or backspace key.
We are specifically interested in the scenarios where the Enter/backspace results in a paragraph change(para add on enter and paragraph remove on backspace of the last character in a para). It seems like a bug to me that SelectionChange wont
fire on backspace when the delete key does fires it.
Is there any other workaround to detect this paragraph change state?

Hi,
>> I am not interested in a cursor change but rather a paragraph change which would indicate a change from one para to next.
The current object model does not have an event to be triggered when changing the content.
If you want to detect the paragraph changing, we could also use a global Timer to detect the paragraph changing of the active document.
>> Multiple documents - i would have to suspend/reactivate my timer on Activate/Deactivate events
>> Multiple windows of the same document - If i have the same document open in multiple windows, split window, new window etc, how would this timer work?
Here is the sample code for your reference:
using System.Collections.Generic;
using Word = Microsoft.Office.Interop.Word;
using System.Timers;
using System.Runtime.InteropServices;
namespace WordSelectionChangeIssue
public partial class ThisAddIn
private Timer addInTimer { get; set; }
private Dictionary<string, int> ParagraphCountDict { get; set; }
private void ThisAddIn_Startup(object sender, System.EventArgs e)
addInTimer = new System.Timers.Timer();
ParagraphCountDict = new Dictionary<string, int>();
addInTimer.Interval = 1000;
addInTimer.Elapsed += TimerElapsedHandler;
addInTimer.Start();
private void BindToChange(Word.Document document)
ParagraphCountDict.Add(document.Name, document.Paragraphs.Count);
private void TimerElapsedHandler(object sender, ElapsedEventArgs e)
if(Application.Documents.Count == 0)
return;
try
var activeDocument = Application.ActiveDocument;
if (!ParagraphCountDict.ContainsKey(activeDocument.Name))
BindToChange(activeDocument);
var previousParagraphsCount = ParagraphCountDict[activeDocument.Name];
var count = activeDocument.Paragraphs.Count;
if (previousParagraphsCount != count)
ParagraphCountDict[activeDocument.Name] = count;
// trigger event
ParagraphChangeHanlder(activeDocument);
}catch(COMException comEx)
private void ParagraphChangeHanlder(Word.Document document)
System.Windows.Forms.MessageBox.Show("Paragraph Changed!");
private void ThisAddIn_Shutdown(object sender, System.EventArgs e)
addInTimer.Stop();
#region VSTO generated code
/// <summary>
/// Required method for Designer support - do not modify
/// the contents of this method with the code editor.
/// </summary>
private void InternalStartup()
this.Startup += new System.EventHandler(ThisAddIn_Startup);
this.Shutdown += new System.EventHandler(ThisAddIn_Shutdown);
#endregion
Regards,
Jeffrey
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Using enter as default key

Similar Messages

Maybe you are looking for