Using external monitor in bios and bootup on 3000 N100

Is it possible to use an external monitor in bios and bootup as my monitor has just died and is now out of warrenty? I am able to use the laptop monitor for about a second each time i open the lid before it turns off. Any help would be much appreciated.

thanks for the quick reply, however it did not work. would the monitor that im using make any difference? (its a sony multiscan g220)

Similar Messages

  • Using External Monitor as display, and laptop for keyboard and track pad

    Hi,
    I have an aluminum Powerboook that is about two years old and I have it attached to a Samsung Syncmaster 203B external monitor. I have been looking for a set of instructions so that I can set the displays (I have been scouting around the preferences window and display options) to have the highest quality. At the present the words on my external monitor are a little fuzzy and I bet could be improved. Also, I've got the monitor and the computer set to be mirrored, but I really don't need the laptop window to be active. I'm just using it for it's keyboard and trackpad and it's sitting on my lap.
    Thanks so much,
    Rob Collins

    Turn off mirroring if you don't need it. Set each display to it's native resolution. Your Powerbook is likely 1280x854, your Samsung is 1400x1050. Use the DVI interface.
    Personally, I just dim my laptop when using the external display, although technically it's still active. Confuses the heck outta me sometimes when an app throws a window onto the laptop.

  • Why is it that when I plug my Macbook Pro to an external monitor, the external monitor turns black and shows the mouse only

    Why is it that when I plug my Macbook Pro to an external monitor, the external monitor turns black and shows the mouse only

    Hi, yes preferences sees there is a second display it recognises what make of monitor it is etc but I just get a blank blue screen on the monitor when I change it to the hdmi setting! I have tried with mirroring on and off, rearranging the displays in the preference window and lots of different resolution settings but with no difference.
    An old MacBook connects fine so the monitor and hdmi port must be okay. I'm sure we have used the cable before but it could have been with the previous MacBook Air. The current one I'm using is a mid 2011 version running lion and is (according to software update) all up to date.
    Any thoughts or help would be appreciated!

  • Switched video settings on my Mac Mini and now the bloody thing shows "Invalid Format" on my TV (used as monitor for years) and I cannot get it to switch back.

    Switched video settings on my Mac Mini and now the bloody thing shows "Invalid Format" on my TV (used as monitor for years) and I cannot get it to switch back.
    What can I do to get it to work again as more than an overpriced paperweight?

    Hello,
    Safe Boot from the HD, (holding Shift key down at bootup), see if you can set a good resolution.

  • Macbook Pro 15 Late 11 extreme fans noise when using external monitor

    Dear Apple, recently I bought Macbook Pro 15 Late 11. I really love it's speed and new OS X Lion, BUT this Macbook really noisy when I use external monitor and keyboard. I work on external monitor all the time. I don't care about how hot my Macbook is when I'm on external monitor. Let it just be hot and quiet.
    P.S. Example. I run Ableton Live and have 6200 RPM working on external monitor (awfully loud!). CPU 90% idle. When I switch off external monitor and use internal one, RPM drops down to 4500 with the same Ableton work session. By the way, I don't need cool graphic card. Apple, let our work days be quiet.

    I did that and it didn't help. It's common problem with an external monitor. Here are some links:
    http://forums.macrumors.com/showthread.php?t=1162550
    http://www.ivy-rose.co.uk/Articles/Macbook-Pro-Cooling-Issues

  • Using ext monitor for timeline and laptop screen as preview?

    is it possible that when i connect my external monitor to my macbook pro i can use the external for the timeline and the laptop screen for the previewing?
    cheers

    I'm trying to do this exact same thing and am coming to the conclusion that it is not possible given my setup. I have a MacBook Pro 2.2 Intel Core 2 Duo with 4GB of RAM and a NIVIDIA GeForce 8600M GT Graphics Card. I'm running FCS 3 and all media is read from a 1TB Seagate 7200 SATA drive read through a SeriTek 2SM2 PCI card in the Express Slot.
    You can easily arrange your monitors to do what you're asking (as outlined above), but the problem is the Graphics Card is not powerful enough to run both monitors and you will experience dropped frames with any HD codecs. I've tried XDCAM, DVCPROHD and ProRes 422 -- all dropped frames immediately. In fact, even if I use the "closed clamshell" mode, so the graphics card is powering ONLY the external monitor, I still get the same dropped frames issue. The only way I can edit or play back without dropped frames is by using NO external monitor whatsoever.
    Is this a unique problem for me? Is there a solution to this? Would the new 17 inch i5's with a NVIDIA GeForce GT 330M (512MB) be able to power an external monitor?
    EDIT: And the External Monitor is a Dell 2408WFP connected through the DVI port.
    Message was edited by: Mr. Landers

  • GS70 Stealth Pro Crashes when using external monitor..

    Hi Guys,
    I just bought a GS70 ghost pro a few weeks ago and have been loving it, no problems, running Battlefield 3 and watchdogs..
    However I just bought an external monitor, Asus VG248QE, when i connected it via display port and tried to play Battlefield 3 on the external monitor the laptop crashed - both screens blank- fan on- power button went orange- had to hold down the power button to reset.
    Tried it again, opened Bf3 in window mode, put it on external monitor, went to full screen - it played ok for a few minutes then the laptop crashed again..
    I had played bf3 no problems on the laptop screen previously.
    Anyone got any ideas what might be going on? I'm new to gaming on pc so I'm a bit lost, any suggestions would be welcome.
    Thanks,
    Dan

    Which nvidia driver are you using? (latest one from nvidia GeFormce Experience or MSI website)
    Try to use the one from MSI website and update the latest VBIOS(80.04.F7.00.0C).
    http://www.msi.com/support/nb/GS70_2PE_Stealth_Pro.html#down-firmware&Win8.1 64
    step by step guide:http://www.msi.com/files/pdf/VBIOS_Update_under_DOS_mode_EN.pdf
    Can you check the CPU and GPU temperature under two situation? (1. when running without external monitor 2. using external monitor)

  • Using External Monitor (Closing Laptop shut down image on external)

    I am always having to RESTART the MBP to get the screen on the external monitor exclusively. I usually use my MBP with external monitors but when I close the laptop the external goes blank too. Then i have to restart and close the laptop very quickly.
    Is there some way to do this without restarting computer each time? (close laptop but keep image on external monitor).

    My 'wish' is to be able to hot switch without 'sleeping' the MBP as this interrupts backups and network drives etc.
    You mean that you want to be able to go from clamshell mode to open MBP with its display in use? As far as I know this isn't really possible. I'm not at home at my external screen right now so I can't test for sure... but as far as I know as soon as you are in clamshell mode the internal display is deactivated. Have you tried opening it up while its in clamshell mode and then unplugging the display? Maybe if you open it while in clamshell mode, and select "Detect Displays" before unplugging the external screen, the MBP display will come back on. In my mind, this should cause the MBP display to come on, but I'm not sure and I'm not in a position to test it now unfortunately. When I get home I'll check it out for you and see what I can figure.
    You're right though, the best solution right now may be to leave the MBP open, use the external display in "mirror" mode, and dim the display of the MBP down to nothing using F1/F2.
    One more thing: When I started using external monitors and projectors, I did not use the menubar item for "Displays". But, I've since started using it and it really makes things much more simple for managing external displays. You can turn it on in System Prefs --> Displays. Then you can detect displays, adjust their resolution, and change the mirroring settings on the fly without System Preferences.
    --Travis

  • Using EXTERNAL Monitor (eSata question too) do you need KEYBOARD Attached?

    First, do you need a keyboard attached? I ask as I can't seem to figure out how to use external MONITOR and CLOSE the macbook pro to watch STREAMING video as the computer goes to sleep.
    Have tried using the F7 as well as in display preferences moving the DOCK to various monitors, regardless, it still goes to sleep when I shut the MBP, so am wondering if a keyboard has to be attached as it doesn't know you are watching video.
    Second thing, I want to use the EXTERNAL to WATCH STREAMING video, however, if I click on FULL SCREEN (external) which is using Silveright, both DISPLAYS go FULL Screen. For the life of me I cannot get external to display FULL SCREEN and have the MBP open to use for other things, work, net browsing, et-cetera.
    Thanks.

    I ask as I can't seem to figure out how to use external MONITOR and CLOSE the macbook pro to watch STREAMING video as the computer goes to sleep.
    If your MacBook Pro goes to sleep who will stream the video?
    For the life of me I cannot get external to display FULL SCREEN and have the MBP open to use for other things, work, net browsing, et-cetera.
    If the mirror display is turned off in the "Display" preference, you would be able to (usually) watch videos in full screen in the external display and work in your main display. But some application may not support this. Check if the application that you are using for streaming video has any preferences to deal with the external display, if not, see if there is any other application that would solve the problem.

  • What do you use to monitoring the IDs and Alerts?

    I have installed a 4250 and built out some custom signatures got the email working from VMS 2.2 for some of high priority alerts. This all great but I was wondering what other people use to monitor the alerts and how they get notifications. I see what I have as being very limited in scope and there are a number of parts in VMS that just do not work.
    Do you use other console products? I have seen a couple of applications advertised that say they aggregate alerts from the pix, ids and mcaffee. Just wondering if or what others use. I only have one ids but I do have other items pix, mcaffee.

    I wish I could but I can't offer up anything that won't come at a cost.
    The original poster in this thread alluded to solutions capable of looking at disperate data in one console. That’s a Security Information Management System (SIMS), pure and simple. Cisco sells one, as do many other vendors. The unfortunate thing is that there is no inexpensive SIMS solution out there that offers multi-product monitoring. They all come at a significant price point.
    Since you both have a single sensor, I agree that VMS Basic is more than you need. The hiccups with it far outweigh the benefits. IEV might be "uncomfortable" to use but it works. In my experience (in a single-sensor monitoring environment), using IEV for monitoring and IDM for configuration management is the easiest, if not the most eloquent, solution.
    If you want fancy visualization or reporting, you're going to have to be willing to plunk down some cash to buy it. With a single IDS sensor, it's just not economically viable IMHO.
    I hope this helps,
    Alex Arndt

  • Is there a way to only use external monitor and have the MBP open to keep it cool?

    I'd like to be able to just use an external monitor with my MBP due to space limitations, However, when I close the lid on my MBP, it overheats and the fans go crazy, making a terrible racket without cooling the machine :/.
    The Screen preferences do not cater for this setup in any way.

    Have you tried placing the Mac on a stand? There are even models with fans for greater cooling effect.
    AFAIK, there is no air movement thru the keyboard or speaker grilles as the fans do their stuff thru the slot below the lid hinge. Maybe taking one of those "compressed air duster" cans and blasting away on the area may help; every time I've done so on mine a mini desert storm of dust has come out.
    What you're trying to use is Clamshell Mode. See if this helps any: http://support.apple.com/kb/HT3131

  • Macbook Chirps and clicks when using external monitor

    My mid 2010 Macbook Pro makes chirping and clicking noises from the hard drive however it only happens when I have my external monitor hooked up. Any one have any idea why? It is different from the Motion sensor click. I've found all over the net that others are experiancing this issue (not connected to external monitor) however haven't I haven't seen a conclusion.  Any ideas?
    Thanks
    Here is a video I just recorded of it  http://www.youtube.com/watch?v=0ZAc9o3Z4Dc

    Hello everyone!
    I found this topic which took my attention as I've been having the same issue for some time..
    Please excuse my bad english, I'm italian... but I'll try to point everything up the best I can.
    Every time I hooked up my macbook pro 13" mid 2010 to the external monitor/TV. I started to hear my hard disk chirping and clicking...
    That was worrying me a lot, thinking my hard disk was going to abandon me soon....
    But I finally came to a solution!!
    Well.. not really a solution, but certainly a workaround.
    In my case my Mac is lying on the side of a 46" Led TV which I use also as a monitor for it, hooked up via HDMI cable and HDMI-MiniDV out Hama adapter. I was using a wifi connection.
    Then I thought "could it be the wifi antenna disturbing the hard disk when the mac is closed?"
    I connected my mac via LAN cable to the router, turned off the wifi, and... my Mac is now quiet as a frozen lake (and a lot faster too)!! ;D
    Please let me know if that works for you too.
    Cheers!

  • No video when using external monitor and resuming from sleep.

    I know some people were having problems with the new MacBooks, but I guess the Mac driver fixed something. However, when I'm in Windows and have my Dell 24" hooked up to the Mini DisplayPort -> DVI adapter, I cannot resume from sleep. The monitor will turn on, but I can't get an image on it.
    In MacOS it seems to resume from sleep fine, but not in Windows. Anyone else seeing this?
    Thanks!

    Is no one else getting this error? Does anyone have any issues when their MacBook is hooked up to an external monitor and it goes to sleep?

  • Preventing SLEEP when using External Monitor and Keyboard

    Prior to Leopard, whenever I had an external monitor and keyboard attached and closed the MacbookPro lid the system would not go into SLEEP mode. Now it does.
    What's to be done to prevent this from happening?

    PS.... when this last occurred, the backup drive for Time Machine disconneted when SLEEP was invoke by closing the lid and did not reconnect when the system restarted.
    I also received a 'warning' that a device was not disconnected properly.

  • How to blank laptop screen when using external monitor/

    Hi there
    I need some help with figuring out how to configure my xorg.conf for my Arch Linux 64 bit installation on a HP Pavilion dv 5000 laptop so that I can automatically blank my laptop screen when using an external monitor.  I have Arch Linux installed along with Ubuntu Feisty.  In Ubuntu my external monitor (Viewsonic 1912WB) was not detected at the time of installation but with the native 1280X800 resolution that is good for the laptop takes effect for the external monitor automatically when the external monitor is plugged in.  The laptop monitor goes blank when the external monitor is plugged in.
    In my Arch Linux installation I have not been able to configure a dual head configuration using the ATI Radeon drivers (fglrx).  I have the native 1280X800 resolution set up for the laptop monitor and this resolution takes effect for the external monitor also.  However the laptop monitor also continues to function when the external monitor is plugged in.  I would like to blank the laptop monitor when using the external monitor.
    I am attaching my Arch Linux xorg.conf and the Ubuntu xorg.conf below.  Thanks for anyone who can help, I am having a lot of difficulty in figuring out how to set up xorg.conf among all the things that I have had to learn so far in Linux and I am a relative newcomer to the whole thing. I have tried to compare the two xorg.conf files and edit my Arch xorg.conf in accordance with the Ubuntu one but it did not work and I keep getting errors!
    I am using XFCE as my Desktop environment.
    Arch Linux xorg.conf
    # File generated by xorgconfig.
    # Copyright 2004 The X.Org Foundation
    # Permission is hereby granted, free of charge, to any person obtaining a
    # copy of this software and associated documentation files (the "Software"),
    # to deal in the Software without restriction, including without limitation
    # the rights to use, copy, modify, merge, publish, distribute, sublicense,
    # and/or sell copies of the Software, and to permit persons to whom the
    # Software is furnished to do so, subject to the following conditions:
    # The above copyright notice and this permission notice shall be included in
    # all copies or substantial portions of the Software.
    # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
    # The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
    # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
    # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    # SOFTWARE.
    # Except as contained in this notice, the name of The X.Org Foundation shall
    # not be used in advertising or otherwise to promote the sale, use or other
    # dealings in this Software without prior written authorization from
    # The X.Org Foundation.
    # Refer to the xorg.conf(5) man page for details about the format of
    # this file.
    # Module section -- this  section  is used to specify
    # which dynamically loadable modules to load.
    # Files section.  This allows default font and rgb paths to be set
    # Server flags section.
    # Input devices
    # Core keyboard's InputDevice section
    # Core Pointer's InputDevice section
    # Other input device sections
    # this is optional and is required only if you
    # are using extended input devices.  This is for example only.  Refer
    # to the xorg.conf man page for a description of the options.
    # Section "InputDevice"
    #    Identifier  "Mouse2"
    #    Driver      "mouse"
    #    Option      "Protocol"      "MouseMan"
    #    Option      "Device"        "/dev/mouse2"
    # EndSection
    # Section "InputDevice"
    #    Identifier "spaceball"
    #    Driver     "magellan"
    #    Option     "Device"        "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    #    Identifier "spaceball2"
    #    Driver     "spaceorb"
    #    Option     "Device"        "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    #    Identifier "touchscreen0"
    #    Driver     "microtouch"
    #    Option     "Device"        "/dev/ttyS0"
    #    Option     "MinX"          "1412"
    #    Option     "MaxX"          "15184"
    #    Option     "MinY"          "15372"
    #    Option     "MaxY"          "1230"
    #    Option     "ScreenNumber"  "0"
    #    Option     "ReportingMode" "Scaled"
    #    Option     "ButtonNumber"  "1"
    #    Option     "SendCoreEvents"
    # EndSection
    # Section "InputDevice"
    #    Identifier "touchscreen1"
    #    Driver     "elo2300"
    #    Option     "Device"        "/dev/ttyS0"
    #    Option     "MinX"          "231"
    #    Option     "MaxX"          "3868"
    #    Option     "MinY"          "3858"
    #    Option     "MaxY"          "272"
    #    Option     "ScreenNumber"  "0"
    #    Option     "ReportingMode" "Scaled"
    #    Option     "ButtonThreshold"       "17"
    #    Option     "ButtonNumber"  "1"
    #    Option     "SendCoreEvents"
    # EndSection
    # Monitor section
    # Any number of monitor sections may be present
    # Graphics device section
    # Any number of graphics device sections may be present
    # Standard VGA Device:
    # Device configured by xorgconfig:
    # Screen sections
    # Any number of screen sections may be present.  Each describes
    # the configuration of a single screen.  A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    # ServerLayout sections.
    # Any number of ServerLayout sections may be present.  Each describes
    # the way multiple screens are organised.  A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option.  In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.
    # Section "DRI"
    #    Mode 0666
    # EndSection
    Section "ServerLayout"
    # The Identifier line must be present
    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens.  The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen.  In this example, screen 2 is located to the
    # right of screen 1.
    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used.  Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".
        Identifier     "Simple Layout"
        Screen      0  "aticonfig-Screen[0]" 0 0
        InputDevice    "Mouse1" "CorePointer"
        InputDevice    "Keyboard1" "CoreKeyboard"
    EndSection
    Section "Files"
    # The location of the RGB database.  Note, this is the name of the
    # file minus the extension (like ".txt" or ".db").  There is normally
    # no need to change the default.
    #    RgbPath    "/usr/share/X11/rgb"
    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
    #    FontPath   "/usr/share/fonts/TTF"
    #    FontPath   "/usr/share/fonts/Type1"
    #    FontPath   "/usr/lib/X11/fonts/local/"
    #    FontPath   "/usr/lib/X11/fonts/misc/"
    #    FontPath   "/usr/lib/X11/fonts/75dpi/:unscaled"
    #    FontPath   "/usr/lib/X11/fonts/100dpi/:unscaled"
    #    FontPath   "/usr/lib/X11/fonts/Speedo/"
    #    FontPath   "/usr/lib/X11/fonts/Type1/"
    #    FontPath   "/usr/lib/X11/fonts/TrueType/"
    #    FontPath   "/usr/lib/X11/fonts/freefont/"
    #    FontPath   "/usr/lib/X11/fonts/75dpi/"
    #    FontPath   "/usr/lib/X11/fonts/100dpi/"
    # The module search path.  The default path is shown here.
    #    ModulePath "/usr/lib/modules"
        FontPath     "/usr/share/fonts/misc"
        FontPath     "/usr/share/fonts/100dpi:unscaled"
        FontPath     "/usr/share/fonts/75dpi:unscaled"
    EndSection
    Section "Module"
    # This loads the DBE extension module.
    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
    # This loads the font modules
    #    Load        "type1"
    # This loads the GLX module
    #    Load       "glx"
    # This loads the DRI module
    #    Load       "dri"
        Load  "dbe"      # Double buffer extension
        SubSection "extmod"
            Option        "omit xfree86-dga"   # don't initialise the DGA extension
        EndSubSection
        Load  "freetype"
    #    Load        "xtt"
    EndSection
    Section "InputDevice"
    # For most OSs the protocol can be omitted (it defaults to "Standard").
    # When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
    # uncomment the following line.
    #    Option     "Protocol"      "Xqueue"
    #    Option    "Xleds"      "1 2 3"
    #    Option "LeftAlt"     "Meta"
    #    Option "RightAlt"    "ModeShift"
    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults).  For example, for a non-U.S.
    # keyboard, you will probably want to use:
    #    Option "XkbModel"    "pc105"
    # If you have a US Microsoft Natural keyboard, you can use:
    #    Option "XkbModel"    "microsoft"
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    #    Option "XkbLayout"   "de"
    # or:
    #    Option "XkbLayout"   "de"
    #    Option "XkbVariant"  "nodeadkeys"
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    #    Option "XkbOptions"  "ctrl:swapcaps"
    # These are the default XKB settings for Xorg
    #    Option "XkbRules"    "xorg"
    #    Option "XkbModel"    "pc105"
    #    Option "XkbLayout"   "us"
    #    Option "XkbVariant"  ""
    #    Option "XkbOptions"  ""
    #    Option "XkbDisable"
        Identifier  "Keyboard1"
        Driver      "kbd"
        Option        "AutoRepeat" "500 30"
    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
        Option        "XkbRules" "xorg"
        Option        "XkbModel" "pc104"
        Option        "XkbLayout" "us"
    EndSection
    Section "InputDevice"
    # Identifier and driver
    # the following line.
    #    Option "Protocol"    "Xqueue"
    # Mouse-speed setting for PS/2 mouse.
    #    Option "Resolution"    "256"
    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.
    #    Option "BaudRate"    "9600"
    #    Option "SampleRate"    "150"
    # Mouse wheel mapping.  Default is to map vertical wheel to buttons 4 & 5,
    # horizontal wheel to buttons 6 & 7.   Change if your mouse has more than
    # 3 buttons and you need to map the wheel to different button ids to avoid
    # conflicts.
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
    #    Option "Emulate3Buttons"
    #    Option "Emulate3Timeout"    "50"
    # ChordMiddle is an option for some 3-button Logitech mice
    #    Option "ChordMiddle"
        Identifier  "Mouse1"
        Driver      "mouse"
        Option        "Protocol" "Auto"    # Auto detect
        Option        "Device" "/dev/input/mice"
    # When using XQUEUE, comment out the above two lines, and uncomment
        Option        "ZAxisMapping" "4 5 6 7"
    # Emulate3Buttons is an option for 2-button mice
    EndSection
    Section "Monitor"
    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    #    HorizSync    30-64         # multisync
    #    HorizSync    31.5, 35.2    # multiple fixed sync frequencies
    #    HorizSync    15-25, 30-50  # multiple ranges of sync frequencies
    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
        Identifier   "My Monitor"
        HorizSync    30.0 - 62.0
        VertRefresh  50.0 - 70.0
    EndSection
    Section "Monitor"
        Identifier   "aticonfig-Monitor[0]"
        Option        "VendorName" "ATI Proprietary Driver"
        Option        "ModelName" "Generic Autodetecting Monitor"
        Option        "DPMS" "true"
    EndSection
    Section "Device"
    # The chipset line is optional in most cases.  It can be used to override
    # the driver's chipset detection, and should not normally be specified.
    #    Chipset    "generic"
    # The Driver line must be present.  When using run-time loadable driver
    # modules, this line instructs the server to load the specified driver
    # module.  Even when not using loadable driver modules, this line
    # indicates which driver should interpret the information in this section.
    # The BusID line is used to specify which of possibly multiple devices
    # this section is intended for.  When this line isn't present, a device
    # section can only match up with the primary video device.  For PCI
    # devices a line like the following could be used.  This line should not
    # normally be included unless there is more than one video device
    # intalled.
    #    BusID      "PCI:0:10:0"
    #    VideoRam    256
    #    Clocks    25.2 28.3
        Identifier  "Standard VGA"
        Driver      "vga"
        VendorName  "Unknown"
        BoardName   "Unknown"
    EndSection
    Section "Device"
        #VideoRam    131072
        # Insert Clocks lines here if appropriate
        Identifier  "* Generic VESA compatible"
        Driver      "vesa"
    EndSection
    Section "Device"
        Identifier  "aticonfig-Device[0]"
        Driver      "fglrx"
    EndSection
    Section "Screen"
        Identifier "Screen 1"
        Device     "* Generic VESA compatible"
        Monitor    "My Monitor"
        DefaultDepth     24
        SubSection "Display"
            Viewport   0 0
            Depth     8
            Modes    "1280x800" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
            Viewport   0 0
            Depth     16
            Modes    "1280x800" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
            Viewport   0 0
            Depth     24
            Modes    "1280x800" "800x600" "640x480"
        EndSubSection
    EndSection
    Section "Screen"
        Identifier "aticonfig-Screen[0]"
        Device     "aticonfig-Device[0]"
        Monitor    "aticonfig-Monitor[0]"
        DefaultDepth     24
        SubSection "Display"
            Viewport   0 0
            Depth     24
        EndSubSection
    EndSection
    Ubuntu xorg.conf
    # /etc/X11/xorg.conf (xorg X Window System server configuration file)
    # This file was generated by dexconf, the Debian X Configuration tool, using
    # values from the debconf database.
    # Edit this file with caution, and see the xorg.conf(5) manual page.
    # (Type "man xorg.conf" at the shell prompt.)
    # This file is automatically updated on xserver-xorg package upgrades *only*
    # if it has not been modified since the last upgrade of the xserver-xorg
    # package.
    # If you have edited this file but would like it to be automatically updated
    # again, run the following command:
    #   sudo dpkg-reconfigure -phigh xserver-xorg
    Section "Files"
        FontPath    "/usr/share/fonts/X11/misc"
        FontPath    "/usr/share/fonts/X11/cyrillic"
        FontPath    "/usr/share/fonts/X11/100dpi/:unscaled"
        FontPath    "/usr/share/fonts/X11/75dpi/:unscaled"
        FontPath    "/usr/share/fonts/X11/Type1"
        FontPath    "/usr/share/fonts/X11/100dpi"
        FontPath    "/usr/share/fonts/X11/75dpi"
        # path to defoma fonts
        FontPath    "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
    EndSection
    Section "Module"
        Load    "i2c"
        Load    "bitmap"
        Load    "ddc"
        Load    "dri"
        Load    "extmod"
        Load    "freetype"
        Load    "glx"
        Load    "int10"
        Load    "vbe"
    EndSection
    Section "InputDevice"
        Identifier    "Generic Keyboard"
        Driver        "kbd"
        Option        "CoreKeyboard"
        Option        "XkbRules"    "xorg"
        Option        "XkbModel"    "pc105"
        Option        "XkbLayout"    "us"
    EndSection
    Section "InputDevice"
        Identifier    "Configured Mouse"
        Driver        "mouse"
        Option        "CorePointer"
        Option        "Device"        "/dev/input/mice"
        Option        "Protocol"        "ImPS/2"
        Option        "ZAxisMapping"        "4 5"
        Option        "Emulate3Buttons"    "true"
    EndSection
    Section "InputDevice"
        Identifier    "Synaptics Touchpad"
        Driver        "synaptics"
        Option        "SendCoreEvents"    "true"
        Option        "Device"        "/dev/psaux"
        Option        "Protocol"        "auto-dev"
        Option        "HorizScrollDelta"    "0"
    EndSection
    Section "InputDevice"
        Driver        "wacom"
        Identifier    "stylus"
        Option        "Device"    "/dev/input/wacom"
        Option        "Type"        "stylus"
        Option        "ForceDevice"    "ISDV4"        # Tablet PC ONLY
    EndSection
    Section "InputDevice"
        Driver        "wacom"
        Identifier    "eraser"
        Option        "Device"    "/dev/input/wacom"
        Option        "Type"        "eraser"
        Option        "ForceDevice"    "ISDV4"        # Tablet PC ONLY
    EndSection
    Section "InputDevice"
        Driver        "wacom"
        Identifier    "cursor"
        Option        "Device"    "/dev/input/wacom"
        Option        "Type"        "cursor"
        Option        "ForceDevice"    "ISDV4"        # Tablet PC ONLY
    EndSection
    Section "Device"
        Identifier    "ATI Technologies Inc ATI Radeon XPRESS 200M 5955 (PCIE)"
        Driver        "ati"
        BusID        "PCI:1:5:0"
    EndSection
    Section "Monitor"
        Identifier    "Generic Monitor"
        Option        "DPMS"
    EndSection
    Section "Screen"
        Identifier    "Default Screen"
        Device        "ATI Technologies Inc ATI Radeon XPRESS 200M 5955 (PCIE)"
        Monitor        "Generic Monitor"
        DefaultDepth    24
        SubSection "Display"
            Depth        1
            Modes        "1280x800"
        EndSubSection
        SubSection "Display"
            Depth        4
            Modes        "1280x800"
        EndSubSection
        SubSection "Display"
            Depth        8
            Modes        "1280x800"
        EndSubSection
        SubSection "Display"
            Depth        15
            Modes        "1280x800"
        EndSubSection
        SubSection "Display"
            Depth        16
            Modes        "1280x800"
        EndSubSection
        SubSection "Display"
            Depth        24
            Modes        "1280x800"
        EndSubSection
    EndSection
    Section "ServerLayout"
        Identifier    "Default Layout"
        Screen        "Default Screen"
        InputDevice    "Generic Keyboard"
        InputDevice    "Configured Mouse"
        InputDevice     "stylus"    "SendCoreEvents"
        InputDevice     "cursor"    "SendCoreEvents"
        InputDevice     "eraser"    "SendCoreEvents"
        InputDevice    "Synaptics Touchpad"
    EndSection
    Section "DRI"
        Mode    0666
    EndSection

    Xrandr 1.2 provides means for this. But today the only supported configuration is xorg-server-1.3 + xf86-video-intel-2.0. So for Radeon you'll have to wait for drivers that support Randr 1.2.
    On my laptop (Thinkpad x60s) that would be:
    xrandr --output VGA --auto
    xrandr --output LVDS --off

Maybe you are looking for

  • Unique ID in ABAP stack across all Envrionment.

    In ABAP Stack is there any table which uniquely identifies one interface mapping across all environments. The requirement is to get a unique ID in ABAP stack (this needs to be hard-coded in an ABAP mapping) which is common in all environment. There i

  • Adobe Reader add-on does not appear in IE9

    After updating Adobe reader 11, I can no longer open pdf in Explorer (works in Chrome).  When I go to Manage Add-Ons, Reader does not appear on the list, therefore I can't enable or disable. Any suggestions on how to get it to appear and work in IE9?

  • Problem using pages created by Muse in Eclipse

    Hi, I created a website using Muse and exported that to HTML into my workspace of eclipse. I get an error when i do that; I have posted a snapshot of the same here, can somebody please tell me what I need to do in order to get rid of the error and ru

  • Messages save location changes automatically from ...

    Hi everybody I have a Nokia 5800 with v51.0.006 firmware. My problem is that randomly when i receive text messages the memory change automatically from memory card to phone memory.  Any ideea why?

  • Images in Aperture appears oversaturated in the Full mode. Please help?

    I'm using 30" Apple HD screen, and when I opening photo in the normal mode all the colors are fine. However once I change it to full screen mode the Red and Yellow become overstaurated. Please help!