Using external monitor with powerbook G4 with a damaged display

Hi,
My powerbook's display has been seriously damaged from being banged from the outside. The screen now has a starburst and a series of heartbreaking lines that make it unusable. Because my budget really doesn't allow me to purchase a new computer right now, I am thinking about connecting it to an external monitor as a temporary fix. Is this a possibility for me? Would it have to be an apple monitor or can I just go ahead and get one of the cheapest ones that I can find? What equipment would I need? Is it possible to use the keyboard and mouse that are part of my laptop or do I need to have external ones? Thank you so much (I'm not exactly a computer genius, as you can tell)!

from the website Low End Mac:
http://lowendmac.com/pb2/powerbook-g4-400-500-mhz.html
Lid Closed Mode: TiBooks supports "lid closed" (or clamshell) mode, which leaves the built-in display off and dedicates all video RAM to an external display. To used lid closed mode, your 'Book must be plugged into the AC adapter and connected to an external display and a USB mouse and keyboard (you might also want to consider external speakers). Power up your 'Book until the desktop appears on the external display and then close the lid. Your 'Book will go to sleep, but you can wake it by moving the mouse or using the keyboard. The built-in display will remain off, and the external monitor will become your only display. Since all video RAM is now dedicated to the external monitor, you may have more colors available at higher resolutions. The TiBook is designed to run safely in closed lid mode, but if yours runs hot (perhaps due to overclocking or high ambient temperatures), you may want to open the lid when in lid closed mode: The screen will remain off and the computer will more readily vent heat from the CPU.
To resume use of the internal display, you need to disconnect the external display, put the computer to sleep, and then open the lid. This will wake up your 'Book and restore use of the built-in display.

Similar Messages

Adjustment lag using external monitor with 4.3

I have an Eizo external monitor connected to my MBP and use the external for editing. I have been doing so for a couple years now and with all versions of Lightroom (even 4.2). I have always been able to see the changes/edits real-time on the external monitors when adjusting something with one of the LR sliders. Ever since I installed the latest LR update (4.3)- I don't see changes realtime. I have to wait until I let go of the mouse/slider to see the changes/adjustments. Anyone else having this issue? Is there something g I can do to fix it?

I believe that change was made in order to improve performance in the Develop module. If it's causing a problem in your workflow, you might like to report it here: Official Feature Request/Bug Report Forum

HP Pavilion external monitor has stopped working with my Macbook Pro (Mid 2012) with OSX 10.8.3

HP Pavilion external monitor has stopped working with my Macbook Pro (Mid 2012) with OSX 10.8.3. When I purchased the monitor a few weeks ago it worked perfectly when computer was in clamshell mode or with lid open. Now external display has stopped working. When I turn on display it scans for signal but does not find it and then immediately goes into sleep mode. I am using a DVI connection with the adapter for the mini display plug. REALLY FRUSTRATING. Any help would be extremely appreciated.

Hi lancekatigbak,
If you're having issues with the display out on your MacBook Pro, you may want to take a look at the troubleshooting steps in the following article:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Cheers,
- Brenden

My MBP recently started logging itself out. I narrowed the problem to the external monitor which is connected with a Thunderbolt adapter. When I disconnected it, the problem went away.

My early 2011 MBP laptop (OS Yosemite 10.2.2) recently started logging itself out. I narrowed the problem to the external monitor which is connected with a Thunderbolt adapter. I installed Thunderbolt firmware update 1.2, that did not correct the problem. When I disconnect the external monitor, the problem went away. Is there something I can do to be able to use the external monitor again?

Try Function F1

How to switch off internal macbook screen when using external monitor(s)

as far as i observed, adding external displays ( running different screens on them, not mirroring) to a macbook pro increases the gpu workload and with that comes temperature rise in the laptop and increase in ventilator noise - and probably increased hardware aging and risk of component faillure due to high temperature inside the laptop.
simply try connecting two external 27" screens and open some flash video on both of them. then run a temperature monitoring software and watch temps rise, compared to running same flash videos / demanding tasks only on one connected external screen or only on the laptop screen with no external monitor connected.
especially in mavericks, due to its increased background routines, such a set-up appears ever the more taxing, then again who does not love apple`s nice adds showing laptops with two 27” screens connected to it and the workspace vision they invoke....
i have seen temps around 100° to 102° celsius on a 13" macbook pro 2012 edition, which i would expect is territory where the cpu / gpu temp safety switches will trigger system shutdown any time soon ( hardware status before verified as fully in order by apple service and default osx installation)
imagine your anti-virus software starting some realtime content screening while runnign some demanding tasks already and the system shuts down easily (all such situation observed in reality)
(would be interesting to see how a retina display macbook fares with 2 external monitors running demanding tasks, considering the retina display already increased taxing for the gpu - any experience from users of such a setup would be very much appreciated as it will provide critical purchase decision intelligence for all of us envisioning a retina-book and two big screens adoring our desks...)
turning down the macbook`s built-in screen`s backlight may reduce power consumption but i have not seen any evidence that it switches off the gpu-to-screen feed and respective gpu load - it certainly did not prevent gpu, cpu, board, etc temps to rise to borderline levels.
so the key question here is, how to switch off the macbook pro`s built-in screen in order to avoid gpu cycles being wasted on that screen ( and the resulting heat developments) when working with big external screen(s) connected to the laptop ?

this thread talks about running several monitors as advertised by apple and running demanding task on them.
with the lid open, the keyboard offers a very efficiant heat escape vector, which is blocked when the lid is closed - this is a basic and commonsense insulation effect. this thread also mentions the use of temperature monitoring software and thus a repeatable test setup. the temps recorded were also mentioned. they rose when the lid was closed, the running task remaining unchanged. as far as i could track down the cpus in discussion will shut down around the 105 degree celsius range. i observed system shut downs when the system approached 103° celsius. not to mention that the fans will run loud well before that.
again this is on hardware checked and ok-ed by apple service.
the question still welcoming an expert answer: is there any way to switch off the built-in macbook monitor while the lid is open ?

Macbook Pro 15 Late 11 extreme fans noise when using external monitor

Dear Apple, recently I bought Macbook Pro 15 Late 11. I really love it's speed and new OS X Lion, BUT this Macbook really noisy when I use external monitor and keyboard. I work on external monitor all the time. I don't care about how hot my Macbook is when I'm on external monitor. Let it just be hot and quiet.
P.S. Example. I run Ableton Live and have 6200 RPM working on external monitor (awfully loud!). CPU 90% idle. When I switch off external monitor and use internal one, RPM drops down to 4500 with the same Ableton work session. By the way, I don't need cool graphic card. Apple, let our work days be quiet.

I did that and it didn't help. It's common problem with an external monitor. Here are some links:
http://forums.macrumors.com/showthread.php?t=1162550
http://www.ivy-rose.co.uk/Articles/Macbook-Pro-Cooling-Issues

Using External Monitor (Closing Laptop shut down image on external)

I am always having to RESTART the MBP to get the screen on the external monitor exclusively. I usually use my MBP with external monitors but when I close the laptop the external goes blank too. Then i have to restart and close the laptop very quickly.
Is there some way to do this without restarting computer each time? (close laptop but keep image on external monitor).

My 'wish' is to be able to hot switch without 'sleeping' the MBP as this interrupts backups and network drives etc.
You mean that you want to be able to go from clamshell mode to open MBP with its display in use? As far as I know this isn't really possible. I'm not at home at my external screen right now so I can't test for sure... but as far as I know as soon as you are in clamshell mode the internal display is deactivated. Have you tried opening it up while its in clamshell mode and then unplugging the display? Maybe if you open it while in clamshell mode, and select "Detect Displays" before unplugging the external screen, the MBP display will come back on. In my mind, this should cause the MBP display to come on, but I'm not sure and I'm not in a position to test it now unfortunately. When I get home I'll check it out for you and see what I can figure.
You're right though, the best solution right now may be to leave the MBP open, use the external display in "mirror" mode, and dim the display of the MBP down to nothing using F1/F2.
One more thing: When I started using external monitors and projectors, I did not use the menubar item for "Displays". But, I've since started using it and it really makes things much more simple for managing external displays. You can turn it on in System Prefs --> Displays. Then you can detect displays, adjust their resolution, and change the mirroring settings on the fly without System Preferences.
--Travis

Using EXTERNAL Monitor (eSata question too) do you need KEYBOARD Attached?

First, do you need a keyboard attached? I ask as I can't seem to figure out how to use external MONITOR and CLOSE the macbook pro to watch STREAMING video as the computer goes to sleep.
Have tried using the F7 as well as in display preferences moving the DOCK to various monitors, regardless, it still goes to sleep when I shut the MBP, so am wondering if a keyboard has to be attached as it doesn't know you are watching video.
Second thing, I want to use the EXTERNAL to WATCH STREAMING video, however, if I click on FULL SCREEN (external) which is using Silveright, both DISPLAYS go FULL Screen. For the life of me I cannot get external to display FULL SCREEN and have the MBP open to use for other things, work, net browsing, et-cetera.
Thanks.

I ask as I can't seem to figure out how to use external MONITOR and CLOSE the macbook pro to watch STREAMING video as the computer goes to sleep.
If your MacBook Pro goes to sleep who will stream the video?
For the life of me I cannot get external to display FULL SCREEN and have the MBP open to use for other things, work, net browsing, et-cetera.
If the mirror display is turned off in the "Display" preference, you would be able to (usually) watch videos in full screen in the external display and work in your main display. But some application may not support this. Check if the application that you are using for streaming video has any preferences to deal with the external display, if not, see if there is any other application that would solve the problem.

GS70 Stealth Pro Crashes when using external monitor..

Hi Guys,
I just bought a GS70 ghost pro a few weeks ago and have been loving it, no problems, running Battlefield 3 and watchdogs..
However I just bought an external monitor, Asus VG248QE, when i connected it via display port and tried to play Battlefield 3 on the external monitor the laptop crashed - both screens blank- fan on- power button went orange- had to hold down the power button to reset.
Tried it again, opened Bf3 in window mode, put it on external monitor, went to full screen - it played ok for a few minutes then the laptop crashed again..
I had played bf3 no problems on the laptop screen previously.
Anyone got any ideas what might be going on? I'm new to gaming on pc so I'm a bit lost, any suggestions would be welcome.
Thanks,
Dan

Which nvidia driver are you using? (latest one from nvidia GeFormce Experience or MSI website)
Try to use the one from MSI website and update the latest VBIOS(80.04.F7.00.0C).
http://www.msi.com/support/nb/GS70_2PE_Stealth_Pro.html#down-firmware&Win8.1 64
step by step guide:http://www.msi.com/files/pdf/VBIOS_Update_under_DOS_mode_EN.pdf
Can you check the CPU and GPU temperature under two situation? (1. when running without external monitor 2. using external monitor)

External Monitor on Powerbook with no display

Alright, so here's the deal...I have a Powerbook G4 Titanium 15 inch, on which the internal display has since died. I removed the display completely and purchased an external display which has worked fine with current OS. But, I have decided to erase the disk and use Linux primarily while partitioning a small amount of space to retain Mac OS 10.4. But, after erasing the disk using the original Mac OS X 10.1 restore disc, all installer startup discs including the Software Restore, Mac 10.4, and Linux will not appear at startup, only the Mac OS x 10.1. I assume this is because the startup disk does not recognize the external monitor and assumes it is running the program on an internal display which is not there. Is there anyway I can permanently erase the internal display options, to in effect make the Powerbook act like a desktop or tower with regards to the external display? Thanks.

If you can’t see your MacBook screen because it’s broken or the backlight is off use the F7 key to switch between Extended Desktop and Mirror Display if you have the Early 2006 model 1,1 MacBook or the Late 2006 & Mid 2007 model 2,1 MacBooks.
From the Mid 2007 MacBook User Guide: F7 (video mode toggle key) Switch between dual-display mode (extending the desktop across the built-in display and an external display) and video-mirroring mode (presenting the same information on both displays).
This won't work on the newer MacBooks.

Help with using external monitor on MacBook

I have a white MacBook 2.1 running 10.5.8. I use to have it run a Samsung LCD 19" which had a 1280x1024 native res, which was available in the screen prefs. That broke, so now I was going to go bigger with a 24". I've forgoten how this works, but I see the specs show this book should do a max of 1920x1200 on an external monitor. However, I don't see that listed as an option in the prefs. Will that be listed if I hook up a monitor capable of that? Also... Most 24" monitors seem to be native 1920x1080. I want to run at the native res of the monitor and not have to do any stretching or anything. Do I need to find a monitor that has a native res of 1920x1200 to match the book's max res? Or will the 1920x1080 work somehow without stretching. I have the mini DVI to DVI adapter, so I assume I should be set for any monitor sold new now.
Thanks for any help. FYI... Don't buy Samsung... 3 1/2 years on an LCD is rediculous.

Hi Dave,
Yes, the available resolutions will show when you hook up an external display.
Depending on the resolutions availabe on a given display, you may or may not be able to run it without stretching (or black bars) at native resolution (most likely you'll be able to).

Using Dual External Monitors as Separate Screens with Late-2011 15" MBP

Hello,
I've looked around for answers, but haven't found something that seems to address what I'm looking for.
I have a late-2011 15" MBP. The Apple TB FAQ page says it can support two external monitors. I currently have it hooked up to one external monitor via mini-to-HDMI.
I'd like to add a second external monitor, but am not sure the best way to do that. It looks like the Apple TB monitors can do it natively, by daisy-chaining, but I can't afford to purchase two of those monitors. I'd prefer to use a third-party monitor like a ViewSonic 27" or some such, which are significantly more affordable.
I want to have two actual separate monitors, the way the setup they do with the Apple TB monitors appears – not two monitors that are splitting a single screen between them (as is the case with a few of the splitter-solutions I've seen linked).
Is there a way to achieve this?
Thanks!

I should clarify that I would prefer to do it without using a USB port to do a USB-to-HDMI conversion. I have used USB for a monitor before, and I find the lag virtually unworkable. A daisy-chaining solution, or a native splitter would be ideal.

Using external monitor with macbook pro?

Can someone tell me how to get my Dell desktop monitor to work with my MBPro? I connected with usb/vga cable; i have a pic on the external monitor and the mouse pointer will move about the screen, but that's it; no funcitonality. I don't know what do do next? Settings?

It sounds like it's working perfectly, you have a functioning image and pointer. But you may be expecting to see some of your windows. It sounds like the monitor is connected in Extended Desktop mode, which means it's working as an additional area to your existing desktop, like sliding another table next to yours. So, if you want to see some windows and programs over on the new monitor, you should drag them there. Also, open your Displays system preference to see this and change settings.
If you expected to see the same image on both your monitors, you need to switch to Mirrored display. If there is a Displays icon on your menu bar, you can switch it there.

How to use external monitor with laptop closed

My external monitor goes to sleep when i close the Macbook Air lid. How do i stop that from happening?

Mac notebooks: How to use your computer in closed clamshell ...

Using external monitor with 7"imac

in perusing this forum, to set up an external monitor, i only need a dvi adapter connected between the external monitor and the mini display port of the imac.
is that correct?
any suggestions on where to purchase the adapter?
once i have it connected, i believe i just need to go to system preferences and set it up via the display preferences.
thanks in advance.
mikeB.

i have a dell monitor also. 1901fp is the model number. it uses the dvi-d single link connector. i'm having problems finding a miniport to dvi-d single link connector. any suggestions?
or do i have to find an adapter to adapt the single link to dual link first?
i should have know this wasn't going to be easy!
thanks,

Using external monitor with powerbook G4 with a damaged display

Similar Messages

Maybe you are looking for