Using fastboot to update the system software

I own one of the early crippled ZTE Open devices and I have installed the fix from ZTE that is supposed to enable fastboot. Now I need instructions for using fastboot to update the OS. I have .img files compiled for my device but I don't have instructions for using fastboot to flash those images to my device.

That has the instructions for recovering a bricked device https://developer.mozilla.org/en-US/docs/Mozilla/Firefox_OS/Developer_phone_guide/ZTE_OPEN#I_bricked_my_phone bricked device using images made by ZTE. What I am looking for are the instructions for are the instructions for flashing the resulting images created when one follows the developer documentation for compiling Firefox OS. The resulting image names are different and I don't know what needs to be flashed, or in what order they need to be flashed.

Similar Messages

  • I use reliance dongle to browse internet on mountain lion, at first it gave me problems but after updating the reliance software it worked fine.  Now i have upgraded my osx to mavericks.  The reliance software gets installed but dosent open giving some er

    i used reliance dongle to browse internet on mountain lion, at first it gave me problems but after updating the reliance software it worked fine. Now i have upgraded my osx to mavericks. The reliance software gets installed but dosent open giving some error, Now i cannot use the internet !!! and itz the latest version of reliance software,,, plz help me !!!

    At last i did some experiments and it solved my problem... heres the solution :
    1. Install the reliance drivers and software from their website.
    2. As the reliance software is not supported my mavericks it wont open, but dont worry.
    3. Now after installation go to system preferences->network->and select  "ZTE Wireless Terminal".
    4. Configuration: Default
         Telephone number: #777
         Account name and password should be the owners number.
    5.Finish ! press apply and click Connect...
       Enjoy browsing !!!

  • HT201250 I had to replace the hard drive in my old MacBook. I replaced it. Installed OSX10.6. Then using the system software I reinstalled data from my Time Machine backup. On completion it asked for my password. It is not accepted. I am locked out how I

    I had to replace the hard drive in my old MacBook. I replaced it. Installed OSX10.6. Then using the system software I reinstalled data from my Time Machine backup. On completion it asked for my password. It is not accepted. I am locked out how I overcome this?
    I was already using 10.7. But only had the disc for 10.6.

    Sorry I am new to this. Am I in the right area? I am using my iPhone to make contact. I am worried.

  • My external hard drive (1TB WD My Book Essential) suddenly has no room to backup with Time Machine! I am using Maverick OS and wondered if it is because of a bug in the system software.

    My external hard drive (1TB WD My Book Essential) suddenly has no room to backup with Time Machine! I am using Maverick OS and wondered if it is because of a bug in the system software. I purchased a new external drive with 3 TB and wonder if I will run into a problem installing it. I don't know how to transfer my files from the previous HD to the New one. I was told to use a cable, but how do I do it? Do I connect them both to the computer and drag the old into the new? How is it done?  Why did this happen, the overloading of the Time Machine?

    Why has the TimeMachine drive run out of space?
    With the limited amount of information you've provided it is hard to answer this question. TimeMachine should continue making backups until the drive is full and then it should erase the oldest backup(s) to retrieve enough space for the next backup. Unless your computer's hard drive has close to 1TB of space on it, you shouldn't see a message saying TM cannot backup because it is full. However if you do have more than 500GB (1/2 a TB) then I can see how that message might occur. Also, if you are using the TM drive for double duty (backing up more than one computer or storing data other than TM) you could get that message.
    Will you have this problem with a 3TB drive?
    I always recommend that people look at how much they'll be backing up in total, add a bit extra for the future, and then multiply that by at least 1.5 and even better to double it. That indicates how large the TM backup drive should be. The TM drive should only be used for TM backups. It is ok to use one drive to back up  more than one computer but if doing so, add up the contents of all the computer drives, adjust for the future and then double it.
    Moving Forward
    Disconnect the old TM drive for now. Connect the new drive and let TM do its job. I don't recommend that you try to transfer the TM backup from the old drive to the new one. Keep the old drive around for a couple months just in case you find you need it and then after a few months, if you like, you can erase it and use it for something else.

  • What does this mean? ... System extension cannot be used ... The system extension "/System/Library/Extensions/IOFireWireWDHID.kext" was installed improperly and cannot be used. Please try reinstalling it, or contact the product's vendor for an update.

    I get this message often when updating things. I have told Small Dog Computer where I buy my stuff, and they didn't have an answer. Thanks in advance.
    What does this mean? ... System extension cannot be used ... The system extension "/System/Library/Extensions/IOFireWireWDHID.kext" was installed improperly and cannot be used. Please try reinstalling it, or contact the product's vendor for an update.

    Interesting ... thank you! Actually I had that external drive, Western Digital, a while back on my second last? or third last? laptop ... the external drive died with a slew of pictures I had carefully uploaded to it  :-(
    I won't worry about it anymore  :-)
    sorry you got only 5 points, can't figure how to give you 10 points.

  • Can iCal use both English and French languages or does the System software need to be either French or English?

    Can iCal use both English and French languages or does the System software need to be either French or English?

    joanfromardon wrote:
    Can iCal use both English and French languages or does the System software need to be either French or English?
    The calendar language is determined by system prefs/language & text/formats.
    The app language is determined by system prefs/language & text/language, or you can probably use
    http://www.tj-hd.co.uk/en-gb/languageswitcher/

  • I have an iphone 3g which brought him use me when I brought it worked fine, I updated the system to 4.3.3 and no longer recognizes any network operator, look at the baseband and 5.16.02 and says it is it does not recognize anything I can do? the operator

    I have an iphone 3g which brought him use me when I brought it worked fine, I updated the system to 4.3.3 and no longer recognizes any network operator, look at the baseband and 5.16.02 and says it is it does not recognize anything I can do? the operator to buy my iphone was a 4 but it was stolen, I thought I could use this but aparentementeno, I can do to make it recognize my carrier? thanks

    Looks like you have relocked a hacked phone when you updated.  The only way to fix it would be if you could figure out the original carrier and see if they would unlock it.

  • I updated the system and software final cut.

    Hello friends
    I updated the system and software final cut.
    After the software update course and Motion me all the time after 6 seconds.
    I did everything you could.
    Until I got old program 10.4.1 and everything works.
    What do I need to do.
    Attached is the Mac specs
    I also tried to Repair Permissions on your system drive and not solved the problem

    I open the program within 6 seconds it crashes.
    An hour ago I was still on the software without Updated with no problem.
    Even Motion Course

  • My magic stopped working after I updated the system to Windows 7 SP1

    It all goes well under the Mac OS X 10.6.
    But,to Windows 7, the partial function went down after I updated the system.
    Here's my problem.
    The function of rolling in the middle area of Mouse didn't work.
    I've tried to reinstall the Bootcamp 3.1, but nothing help.
    So I wonder if there's anyone who can help me out.
    P.S. Poor English, expected that you can understand.

    Did the Windows 7 disc have SP1 on it or did you download it from Windows Update/Microsoft site. I had Windows 7 64-bit on my system and I went to the Microsoft site to download SP1 and then installed it (I had issues in the past on different PC getting service packs to download and install from Windows Update). After it installed Windows was fine I had no issues. When I was finished with using the system for the day I went to Start>Shutdown to turn it off. Then the next day I turned it on and booted into Windows and it asked for my password. I went to type it in and nothing showed in the box. I went to use the built-in mouse in the MacBook Pro and it would not move. This had happened after I redid the entire hard drive (Mac OS X and Windows) after having some other Windows issues I was having. After I found out the issues were not on the Mac OS X side I put Windows back on and the drivers for it that was on the Mac OS X disc and used Apple Software Update for Windows to get the 3.2 drivers. I don't think Apple systems and Windows7 using SP1 is compatible. If you are able to in some way or form to go to Control Panel and view the installed Windows Updates, click on the one for Service Pack 1 and then click on uninstall and remove it. I take care of the updates on another system for someone else on an HP using Winsows 7 64-bit and after what happened to me I am not putting Service Pack 1 on theres.

  • HT4623 I can not get my Ipad to update the latest software rendering my Ipad useless. It keeps saying software update unavailable.

    I can not get my IPAD to update the latest software the update says it is unavailable at this time try later I have been trying for 5 hours  any suggestions as this renders my IPAD useless

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.0.4. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    You can no longer update to iOS 6.x, or down grade the iOS.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
    How to Upgrade to iOS 7
    The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
    There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
    To upgrade using Wi-Fi:
    Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
    Go into the iPad's Settings.
    Locate and tap "General" from the menu on the left.
    The second option from the top is "Software Update". Tap this to move into the update settings.
    Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
    Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
    To upgrade using iTunes:
    First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
    You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
    Now you are ready to begin the process:
    If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
    Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
    After canceling the dialog box, iTunes should automatically sync with your iPad.
    If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
    After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
    From the iPad screen, click on the Update button.
    After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
    After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
     Cheers, Tom

  • I have an older ipod...ever since I updated the itunes software my ipod no longer works in my car.  my car is a 2013 mercedes E350.  Is there a way to go back to an older version of the itunes software?

    I have an older ipod...ever since I updated the itunes software my ipod no longer works in my car.  my car is a 2013 mercedes E350.  Is there a way to go back to an older version of the itunes software?

    If it's an older iPod, its software is not being updated by Apple.  So, I don't see how updating iTunes would make the iPod not work with the car's audio system, since iTunes just updates the song files (not how the iPod operates).
    Does the iPod work by itself (play songs), when disconnected from the computer and iTunes?

  • How do I update the iOS software on iTunes for Windows

    Hi all.
    The battery life in my phone was decreasing very quickly to the point where I have turned it off with 100% at night, and wake up in the morning to have it at 0%. So yesterday, after making a few calls I got to this nice man who explained to me that it was not a problem with the battery, but I needed to update to the latest version of iOS (generally fixes the problem). I don't have enough space (and cannot clear it), so he suggested another option. I would have to use iTunes. First he told me to upload my data to iCloud. As I have not done it before, it took a while, and it did not work for a while. He sent me the link of what to do via email (Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support) and hung up, after me thanking him. My cloud finally updated a little before 10PM GMT and I went to sleep. In the morning my battery was not dead, albeit it had only gone done by a few %. However, I still want to update to the newest software.
    I have the latest version of iTunes on my laptop and so this morning I plugged in my phone to my laptop (using the computer - phone plug). However I cannot see where to select my device. My phone is not coming up in any corner, and it is not charging when it is plugged into my laptop either (I read somewhere that it should). So my question is, how do I select my device. It is plugged in but it not coming up for me. Please be as explicit as possible.
    If it helps I have an iPhone 4s bought in December 2013.
    Thank you!

    I'm not sure if it should be here or in the iPhone usage forum.

  • [SOLVED] vi (vim) no longer works properly after updating the system

    After updating the system with pacman -Syu vi stopped working. All syntax colors are gone, and everything is grey. When I press i to enter "insert" mode, editing is not visible. Changes are obscure and you can't tell what you are modifying.  Quitting with :q will still prompt you to use :q! to abort changes, even if no changes were visibly made.
    When scrolling to the beginning or end of a file, the screen flashes with grey glitch like areas.  What happened to my vi!?!?!?!?!?
    This all happened while following the beginner's guide to install arch linux.  I realized this when trying to arbitrarily read a test file I made directly after updating.
    The problems continued to be visible when installing and setting up sudo (those steps are the next steps that require vi)...  I think the sudo installation worked... but my vi is horribly glitchy
    Any ideas?
    Last edited by trusktr (2010-02-19 07:19:55)

    Setting EDITOR does not help in every case. For instance, visudo is by default hard linked to vi. (You can change this, I know. )
    But in fact, vi is only a symlink to ex. So I simply renamed this link and put another symlink to vim (vim-big in my case since I in fact do use the gvim package).
    /usr/bin/vi -> vim-big
    /usr/bin/vi-simple -> ex
    The drawback is that I have to set those links on every vi-update. (But I sure will remember...)
    Last edited by bernarcher (2010-02-19 00:58:57)

  • With Lion, How Can I Erase the Hard Drive and Reinstall The System Software?

    I plan on buying a used iMac with a Core 2 Duo so that I can run Lion.  Since Lion can only be purchased at the Mac App store what if I needed to erase my hard drive and re-install the system software.  How can I do this without a DVD with the OS on it like I have for Snow Leapard.  I suppose that I could boot from my Snow Leapard DVD and do the erase.  Then, I supposed I would be able to download Lion again from the Mac App Store without paying for it again.  But, how would you erase a hard drive and reinstall the system software when purchasing a new Mac with Lion already installed and no DVD at all with the OS on it?
    -- Kaydell

    When someone purchases any Apple computer with a DVD Drive, they should have recieved two DVDs... One contains the Operating System (up to Snow Leopard, Lion no longer ships on DVD) and the other contains the SYSTEM SOFTWARE (i.e. iLife and iWork). To install the software, they just insert the DVD with the SYSTEM SOFTWARE into any compatible Mac and run the installer. There is no need to erase the hard drive to install SYSTEM SOFTWARE. Maybe a friend can let you borrow the SYSTEM SOFTWARE DVD. The other option is to purchase the software via the App Store.
    FYI... App Store purchases are linked to the PURCHASER'S APPLE ID. So if you buy a used Mac from a friend and that Mac already has Lion installed on it,that Lion purchase is linked to YOUR FRIEND'S APPLE ID, not yours. So if you want to download Lion again, you will have to enter your FRIEND'S APPLE ID AND PASSWORD. You can always have your friend re-download Lion and make you a DVD copy.

  • I have just updated the i06 software for my ipad and it will not connect to my home wifi network - all my other devices are able to connect - i have tried all troubleshooting options and none have worked - please help

    I have just updated the i06 software for my iPad and it will not connect to my home wifi network - all my other devices are able to connect to my wifi network.
    I have attempted all troubleshooting actions suggested and nothing has worked. I have restored my iPad network and factory settings - Please help - this is frustrating me

    you have to set up your router to solve th problem. first find and write down the ipad mac address.
    then log on to your router using your laptop or any device that can connect to router at 192.168.0.1 in your web browser. please check out my posting about how to resolve the wifi connection problem.
    i think the ios6 update has reset the networking but if you set up the router then you should not have the same problem any more.

Maybe you are looking for

  • Discoverer Plus - Problem with Page Orientation when printing pdf's

    Hi, When printing pdf's in Disco Plus I have a problem: My workbooks are a mixture of landscape and portrait pages. I am printing the entire workbook and then using cutepdf to produce a pdf. If I print to paper I get the correct landscape/portrait se

  • Serial Number problem Adobe Acrobat Pro XI - Illustrator CS6

    Bonjour J'ai reçu hier les programmes  Adobe Acrobat Pro XI et Illustrator CS6 par mon Université. J'ai reçu aussi les deux licences qui vont avec. Maintenant quand j'essaie de introduire les deux licences un message "we are unable to validate this s

  • Sending content of a jsp to a printer

    i'v some reports in the form of text in jsp and in the future i have to prepare some reports in the form of graphs(which i don't know how to) and on the click of a button the content should be printed on a printer. can you help me in this regard. awa

  • Driver update for 8600 failed

    Using  HP product  CM 750 A  OfficeJet Pro 8600 Plus with  ethernet cable connected to  Mac  21.5", OSX 10.9.5 Maverick. Running HP version 9.4  (447.2), tried to up date to version  12.34 because of two problems: 1. Amost every time I  put the Mac t

  • Workflow Ownership Question, v6005

    I have a particular use case that I'm trying to solve. Right now our workflows are configured in such a way that the spec Author is also the transition Owner between Step1: Draft and Step 4: Approved. We recently encountered the use case where an Aut