Using Fault Message Type in BPM

Hi,
In my BPM Scenario, I am using a synchronous send step in which I am using a fault message type.For giving the container for the fault message in the Properties area of the send step, I want to define a container corresponding to the Fault message Type I have already defined.How can I achieve this since it is not possible by defining an Abstract Interface? Can someone please explain how to do this?
Thanks and Regards,
Soumya.

Hi Soumya,
Here are the links for two threads. one has discussed fault mssage type in bpm and the other the general application of a fault message type.
thread1:- Alert monitoring and fault message types
thread2:- fault message in BPM process
Regards,
Sushumna

Similar Messages

  • Error handling using fault message type in outbound synchronous ABAP proxy

    Hi,
    We've a scenario, outbound synchronous ABAP proxy to synchronous SOAP receiver. The requirement is to send multiple records in a single rquest and get response for all the records sent (in the same response message).
    Say if I send 10 records from ECC, I should get 10 records as response from SOAP to ECC. But the problem here is, there could be some invalid requests, for which an invalid error status code should be sent as part of response.
    Source Structure
    Req_Proxy
        req (0..unbounded, string)
    Response Structure
    Resp_SOAP
      Resp (0..Unbounded)
           respString (0..1, String) (carries the actaul response message)
          status code (0..1, String) (carries the status of the response, for ex, 001 (successful), 002 (error))
    And now we are planning to make use of Fault Message Type, to track the errors from SOAP (status code 002). But, we are not sure on how to track this for all the requested records. Is it possible to track the errors for all the requested records in a singe call using fault message type? For eg if 8 records are successful and 2 are invalid, then we should get 10 records in response 8 for valid and 2 for invalid accordingly.
    Please calrify.
    Thanks.
    Rohit

    For eg if 8 records are successful and 2 are invalid, then we should get 10 records in response 8
    for valid and 2 for invalid accordingly.
    Check if you can modify the WSDL structure to include an error node that would get populated incase of invalid entries....this would mean that you get the success and failure details in the single message....also at the proxy-end make the necessary change in your DT.....may be then you do not need to use the fault message...
    Regards,
    Abhishek.

  • ABAP provider proxy error using Fault Message Type

    Hello experts,
    I'm using a provider ABAP proxy with a fault message type in the inbound service interface.
    In the ABAP code on the backend system, I need to fill a database table.
    in case the record exist --> fault + message back to SAP PI to be alerted.
    I do this with a RAISE EXCEPTION TYPE.
    I generated all necessary proxies.
    The error I got on the backend system (SXMB_MONI) is this:
    Application Error - Call Inbound Proxy
    SAP:Category>Application</SAP:Category>
      <SAP:Code area="ABAP">APPLICATION_ERROR</SAP:Code>
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="xxxxx">FMT_xxxxxx</SAP:ApplicationFaultMessage>
      <SAP:Stack>The application triggered an exception</SAP:Stack>
      <SAP:Retry>N</SAP:Retry>
    Can it be that I need to use something else instead of the RAISE EXCEPTION TYPE. to get something back to SAP PI?
    Now the error is logged in SXMB_MONI on the backend system.
    Please advice.
    Thanks a lot
    Dimitri

    Hi Dimitri,
    Check out these links -
    1. /people/shabarish.vijayakumar/blog/2006/11/02/fault-message-types--a-demo-part-1
    2. http://help.sap.com/saphelp_nw04/helpdata/en/5d/a45c3cff8ca92be10000000a114084/frameset.htm
    Regards,
    Sunil Chandra

  • Fault message type using in File to IDoc Scenario

    Hi,
    I have successfully configured File to IDoc scenario. Now I am thinking to add some flavour to it by using Fault message type.
    Can I use fault message type without using any proxies?
    Can some body help in giving an answer to my question and provide some weblogs to achieve the configuration?
    Thanks in advance.
    Suraj Kumar

    Hi Suraj,
    With IDOCs, you cannot set up fault messages as it is async mode communication. There is not control which waits for the processing of the message/application errors as you have it in case of synch mode.
    But, you can set up acknowledgement using ALEAUD. Check this for more /people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc
    praveen

  • Regarding mandatory fields, Context Objects and Fault Message Types

    Hi All,
    1) I am creating a structure with fields "Name", "Street" and "City". While creation i want to make "Name" fields as mandatory. Is it possible. If so how to achieve this.
    2) What is the purpose of Context Object and in which situation we will use this.
    3) What is the purpose of Fault Message Types and in which situation we will use this.
    4) I am doing file to file scenario, at sender side i have set the adapter as file and transport protocol as "FTP" . It is asking for "Server", "PORT" and "Login Details". What is this FTP, for this do i need to take any login details. I am totally not aware of FTP, could please explain more about this.
    Kindly look into the above points and respond point by point.
    Thanks in advance.
    Regards,
    Prem.S

    Hi prem,
    <b>1) I am creating a structure with fields "Name", "Street" and "City". While creation i want to make "Name" fields as mandatory. Is it possible. If so how to achieve this.</b>
    give occurence 1..unbounded. for the field name.
    <b>2) What is the purpose of Context Object and in which situation we will use this.</b>
    If u have multiple receiver system then to determine the reciever u can use context object.....
    the alternative of context objetc is X-Path...
    Check out these
    http://help.sap.com/saphelp_nw2004s/helpdata/en/d6/e44fcf98baa24a9686a7643a33f26f/content.htm
    /people/prasadbabu.nemalikanti3/blog/2006/09/20/receiver-determination-based-on-the-payload-of-input-dataextended-xpathcontext-object
    Here is a scenario where context objects were used for BPM
    Technical Context Object in ccBPM
    Get the details here:
    http://help.sap.com/saphelp_nw04/helpdata/en/d6/e44fcf98baa24a9686a7643a33f26f/frameset.htm
    Technical Context Objects :
    http://help.sap.com/saphelp_nw04/helpdata/en/d6/e44fcf98baa24a9686a7643a33f26f/frameset.htm
    A list of the Technical Context Objects names can be found here:
    http://help.sap.com/saphelp_nw04/helpdata/en/6e/ff0bf75772457b863ef5d99bc92404/content.htm
    Difference between context object and x-path:
    diff between context object and x path
    <b>3) What is the purpose of Fault Message Types and in which situation we will use this</b>
    whenever u want to catch some exception u can use fault message types.Just for a example u r sending some data to SAP system.But due to some reason the R/3 system is down.so in this case if u have implemented fault message ..u can get a error message specifying r/3 is down....
    Fault message implementation.
    /people/shabarish.vijayakumar/blog/2006/11/02/fault-message-types--a-demo-part-1
    How to Guide
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40574601-ec97-2910-3cba-a0fdc10f4dce
    <b>4) I am doing file to file scenario, at sender side i have set the adapter as file and transport protocol as "FTP" . It is asking for "Server", "PORT" and "Login Details". What is this FTP, for this do i need to take any login details. I am totally not aware of FTP, could please explain more about this.</b>
    there are two transport protocol for File adapter
    1)FTP(File transfer protocol)
    to know abt FTP check here
    http://help.sap.com/saphelp_nw04/helpdata/en/43/0e16bfd7b021aee10000000a1553f6/content.htm
    2)NFS(Network File System)
    in server :Enter the host name or IP address of the FTP server.
    in PORT:Specify the port number of the FTP server.
                 The default is the standard port for the FTP server (21)
    check here
    http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
    Regards
    BILL
    <b>***reward with points if ity helps u!!</b>

  • Alert and Fault Message type Usage

    Hi All,
    I struck to the use of Alert and Fault message type.
    (a) Can we use Alert in scenarios without BPM ? If yes where can we use?
    (b) Can we use Fault Message Type in scenarios except Proxy ? If yes, how?
    Kindly suggest me .
    Thanks
    Anup

    Hi Rabi,
    In order to use Alert for your File to File scenario, you need to setup Alert Configuration.
    To configure alerts, you need to create the following:
    1. Alert Categories in tcode ALRTCATDEF
        - Here you need to define the alert message that will be sent once error occured and alert has been triggered. You would need to define here the recipients who will receive email notifications about the error message.
    2. Alert Rules in Runtime Workbench
    - Here you need to define which alert category you would use based on the rules you set. You can define if the error is in the Integration Engine or in Adapter Engine (for errors in File Communication channels). Also, you need to define condition for  the alert by selecting the sender and  receiver systems, interfaces that would be involved for the alert.
    For further details, you may look the SAP documentation:
    http://help.sap.com/saphelp_nwpi711/helpdata/en/d0/d4b54020c6792ae10000000a155106/frameset.htm
    Regards,
    Jenny

  • How is the Fault Message Type used?

    Hi,
    I have a HTTP-SOAP scenario.I want to post a request to a HTTP Server using the SOAP receiver adapter and get the ackowledgement message from the receiver, if it was successful or not. Is this possible using the Fault Message type?
    If not how else can i capture the response in the EO mode?

    Hi Sivasakthi
    Yes you can capture soap response using SOAP fault message
    Check this link for embedded soap response
    http://www.w3.org/TR/2000/NOTE-SOAP-20000508/
    With this you can refer to this blog as well
    Handling Web Service SOAP Fault Responses in SAP NetWeaver XI
    Thanks
    Gaurav

  • Is it mandatory to use a Fault Message Type.

    Hi all
    I am currently doing a Soap-Proxy synchronous scenario,where by sending an employee id through webservice to SAP ECC ,employee details will be retreived from ECC as a response.
    In this scenario, is it necessary to specify the Fault Message Type in the outbound and inbound synchronous Message interfaces and do the corresponding message mapping for Fault message types.
    Asvance Thanks,
    Ram.

    Hi ram,
    It is not at all mendetary to use Fault message in ur case.Usually it depends upon requirement.If client want's to implement ...u have to use.
    generally fault messages are used wen u want to catch some exception viz. ECC server is down,Employee ID does not exist.,No record found for the given EmpID etc....ect.......
    See these to know more abt fault message type and its implementation........
    Fault message implementation.
    /people/shabarish.vijayakumar/blog/2006/11/02/fault-message-types--a-demo-part-1
    How to Guide
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40574601-ec97-2910-3cba-a0fdc10f4dce
    With Integration Scenario
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/52398597-0601-0010-868a-fd95f8061d85
    How to Guide - Using Web Service
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f027dde5-e16e-2910-97a4-f231046429f2
    Presentation
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9f2ad490-0201-0010-a1bd-81d072f3c5ca
    Regards
    Biplab
    <i>***Reward with points if it helps you!!</i>

  • Hi all!How to use the fault message types

    Hi all, i am new beginner on XI.
    I have read the introduction in SAP Library about
    fault message types
    but the steps of how to use fault message are clear
    could you help me?
    could you give me some guide or docs or links?

    Hi,
    These might help you:
    http://help.sap.com/saphelp_nw04/helpdata/en/f3/c26c3cbfac384fe10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/5d/a45c3cff8ca92be10000000a114084/frameset.htm
    Regards,
    Chandra

  • Difference in Fault message types & exceptions for Webservice in ABAP

    Hello all,
    I am relatively new to the web service framework in SAP. My problem scenario is as follows.
    I have a WSDL file of a webservice from 3rd party non-SAP s/w  and I want to replicate the same webservice into SAP by creating FM in SE37 with same imp/exp parameters and functionality.
    So I first created a consumer proxy using the external WSDL file of non-SAP webservice. This generated imp/exp DDIC structures in SAP. Now I created a RFC FM in SE37 with similar Imp/exp parameters and relesed this FM as a webservice.  I then created another consumer proxy using WSDL of this newly created webservice in SAP.
    In the old consumer proxy I see a structure as SOAPFault as a Fault message type which has 3 fields ERRORCODE, TEXT, DETAILS but in the newly created consumer proxy I don't see Fault message types but i see exceptions which i mentioned in exception tabs while creating the FM. The imp/exp parameters are identical.
    So my question is while creating a web service in SAP using a FM in SE37, what needs to be done in order to get the Fault message types getting created automatically when we create a consumer proxy for this webserivice?
    Also based on the WSDL of 3rd party system , can i replicate the same web service in SAP ?
    Appreciate your expert advice on this.
    BR
    Nilesh Puranik

    Hi Krishna,
    I've read the SAP description about Fault Message Types but I'm still struggling on how to use them correctly.
    Why do we need them if I can't do nothing with it on the BPM side? After the mapping of the FMT, I'd like to acess it so that I can send a description back to the original system...The thing is, in BPM you can't acess the FMT, you can only create a new BRANCH (on a block step) for it...
    I've tried to acess the description text on trace which comes with the message, but it seems that the trace only serves for posting info, and not for getting any...
    The Mapping Runtime Constants have some information where you can read some descriptions, but nothing related to the errors....You can read the Receiver service, sender, interface_namespace, but nothing from the ERROR tag...
    Is there a way to get the description? Or anything related to the error tag?
    Thanks in advance

  • Fault message types: Why do we need them?

    Hi guys,
    I have a bpm scenario created, tested and working.
    This bpm starts with a async receive, a Sync Send to a R3 system by an ABAP proxy and a final async send to the original system.
    I'm contemplating exception handling and other type of errors. Meaning, if the abap proxy dumps I can raise an exception and map it on the XI environment. The thing is, on  sxmb_moni I get the exception handler, with the exception texts, id's, etc... from the R3 being mapped to the XI fault message type.
    But the problem is I can't get to map the text from the fault message type into any field from the response of the original system.
    I've searched the forum and I've seen that this area is surrounded by doubts and questions...
    But in the end I'm forced to place the question, why do I need the fault message types? What use can I give them, besides of the cute little thunder on the sxmb_moni?
    Thanks for your attention guys

    Hi Krishna,
    I've read the SAP description about Fault Message Types but I'm still struggling on how to use them correctly.
    Why do we need them if I can't do nothing with it on the BPM side? After the mapping of the FMT, I'd like to acess it so that I can send a description back to the original system...The thing is, in BPM you can't acess the FMT, you can only create a new BRANCH (on a block step) for it...
    I've tried to acess the description text on trace which comes with the message, but it seems that the trace only serves for posting info, and not for getting any...
    The Mapping Runtime Constants have some information where you can read some descriptions, but nothing related to the errors....You can read the Receiver service, sender, interface_namespace, but nothing from the ERROR tag...
    Is there a way to get the description? Or anything related to the error tag?
    Thanks in advance

  • Usage of Fault Message Types

    Hi Champs.
    Need your help.
    I want to know if we can use the Fault message types for the following scenario:-
    Any Async-to-Async scenario, with no proxies and with no BPM.
    If yes, then how to use it?
    By principle, I feel that we can use it for the above case. But if you can let me know in details, that will be appreciated.
    Thanks in advance.
    Neetesh

    Raj,
    Fault message types are designed for application-specific errors that occur on the inbound side and that are reported back to the sender or persisted in monitoring.
    But if you want for Asynch messages we can use this type of messages only for an asynchronous ABAP server proxy is persisted for monitoring. In the case of asynchronous of Java server proxies, the fault message is part of a negative application acknowledgement.
    For detail help please go through the url:http://help.sap.com/saphelp_nw2004s/helpdata/en/55/c5633c3a892251e10000000a114084/frameset.htm
    Hope this helps.....
    ---Satish

  • Types of fault message types

    Can someone tell me the different types of fault message types available in XI?

    Hi,
    Fault Message Types
    are used only for returining messages form the inobund side (application)
    http://help.sap.com/saphelp_nw04/helpdata/en/dd/b7623c6369f454e10000000a114084/content.htm
    if you want to create error handling for a mapping
    you can use transformation step (in a BPM)
    add a block and catch the mapping error inside this block
    (and for instance send a file from this exception branch
    Refernces Fault message types for the Exception handling .
    Fault message types corresponding to the standard SOAP Fault type can be included (execepted in the outbound Asynchronous case)
    A fault message is a message that describes an application-specific error situation.
    Fault message types are designed for application-specific errors that occur on the inbound side and that are reported back to the sender or persisted in monitoring.
    · In the synchronous case, when an application-specific error occurs on the inbound side, instead of sending a response message back to the sender, the application can send a fault message to handle the error.
    · The fault message of the application for an asynchronous ABAP server proxy is persisted for monitoring. In the case asynchronous of Java server proxies, the fault message is part of a negative application acknowledgement (see Acknowledgments).
    Application-specific means that the application on the inbound side triggers the error itself because, for example, the request message did not contain sufficient information.
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/dd/b7623c6369f454e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/5d/a45c3cff8ca92be10000000a114084/frameset.htm
    Please see the below links
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ee5bc490-0201-0010-e9b5-a258cf083bca
    /people/sap.user72/blog/2006/01/16/xi-propagation-of-meaningful-error-information-to-soap-client
    /people/shabarish.vijayakumar/blog/2006/11/02/fault-message-types--a-demo-part-1
    Thanks
    Swarup
    Edited by: Swarup Sawant on Mar 28, 2008 3:05 PM

  • Fault message handling in BPM

    Hi again xi fighters
    I created a business process with a synchronous sending step. I defined all interfaces and implemented also an own fault message type within the synchronous abstract interface. If the used RFC got the correct data the sync. sending step worked proper and also the business process worked fine. If I providing wrong data to the RFC to force him to throw an exception the Business process received the fault message. Then I just want to send the received fault message asynchronously to a file adapter within the defined exception branch. And now the question no-one answered in several discussion threads ;-<
    How can I send the message? I am not able to implement a new variable in the container for the fault message type. Any advises here?????
    Please help me, before I got inshane of SAP ;->>
    Regards Oliver
    Message was edited by: Oliver Bluhm
    Hi everybody
    any ideas, or is the question not clear. Please have a look and let me know you exlperience!
    Regards Oliver

    Hi Oliver,
    how do you know, that is impossible to read the content of the fault message in the exception branch? Did someone from SAP say that? For days I read all the notes, blogs, help,.. and didn't find an answer.
    It should work.
    1. I have an integration process in XI sending a sync message to R3.                                    
    - OK
    2. In the generated proxy class I raise an exception of the generated exception proxy class.              
    - OK
    3. The exception message is shown in the message monitoring, containing also all our customer-data.
    - OK
    4. The integration process in XI activates the correct exception branch.
    - OK
    Missing: How do I get a grip on the data in the error message? 
    Kind regards Philipp
    Message was edited by:
            Philipp Jakob

  • Doubt on technical systems and fault message types

    Hi,
            I had still doubt & i'm not clear to answers i got yesterday , plz clarify my doubts
             1.what are fault message types and   how  do we catch any exceptions  in file to  proxy scenario , can any one give simple example ?
             2.How do we register a non-sap system(FTP SERVER) in SLD  ? what steps  should we follow? Does any one have blogs regarding this?
               Plz answer to this questions, good answers will be rewarded.

    Hi Smitha,
    <i>1. what are fault message types and how do we catch any exceptions in file to proxy scenario , can any one give simple example</i>
    Fault Message are Msg type that provided whenever u create a namespace..they are usually used to get the exception or error mapped which has occured while execution of Application at the sender/receiver end....
    One scenario where i had used it from Soap to RFC where i defined the exception in rfc source code at r/3 end...I mapped that exception to Fault msg type that i created of my own type(didnt used the default)..
    Refer this for Fault msg usage in Asynch scenarios.
    /people/shabarish.vijayakumar/blog/2006/11/02/fault-message-types--a-demo-part-1
    Refer this for Fault msg usage in Synch scenarios.
    /people/sap.user72/blog/2006/01/16/xi-propagation-of-meaningful-error-information-to-soap-client
    Refer this for Handling Exceptions
    http://help.sap.com/saphelp_nw04/helpdata/en/33/4a773f12f14a18e10000000a114084/content.htm
    <i>2.How do we register a non-sap system(FTP SERVER) in SLD ? what steps should we follow? Does any one have blogs regarding this?</i>
    For this you have to define the 3rd Party TS & BS in sld.
    Have a look at the following links...
    http://help.sap.com/saphelp_nw04s/helpdata/en/fa/0aad3efa11b300e10000000a114084/frameset.htm
    Cheers...
    Vasu
    <b>** REward POints if found useful **</b>

Maybe you are looking for

  • Has upgrade to iPhoto 6 solved anyone's SBOD hang problems?

    I'm just curious if there is a bug fix included with this version. I'm going to upgrade regardless because I want the other features of iLife, but I've been hoping against hope that iPhoto 6 might actually deliver. I'd be tickled if it delivered the

  • Increase the call depth in JRA data

    It seems that by default, I can only access 15 levels of call stacks for one method's callers in JRA data. Does any of you know how I can increase the call depth in JRA call stack? Thanks much!!

  • Features in Benefits module

    Hi Friends, Please let me know about the features which we are using while configuration of benefits module. what features should we maintain in the Benifits module and what would be the possible return values? hope for early reply. thanks in advance

  • Can't run photoshop elements II

    i have installed photoshop elements II   but when I log on and try to open it ....says photoshop not available check network connections error 400     I am online so what's up with this?

  • Process code used for DELFOR inbound idoc

    I have to create one interface in that i have to capture the transfer orders from that i have create the DELFOR idoc which used for posting the scheduling agreements. These agreements will pos teh requirement to the forecast tab. Please let me know t