Using file receiver adapter with a different user

Hello.
I have a simple question (at least I think it is)
Can I use a file receiver adapter (where the transport protocol is NFS - not FTP)
so that a different user will access the directory (not the usual SAPServiceSID)?
I don't see any place for using username and password, and using the FTP protocol is not possible
because of security reasons.
Any help Appreciated.

Hello.
Thanks for the quick answers.
I'm sorry for not being clear enough before.
I have a microsoft network share on a different server then the PI.
When I use the path:
server\share
I manage to successfully put a file via the file receiver adapter, with NFS as the transport protocol.
However in order to do this, the owner of the share had to give credentials to the user: SAPServiceSID of my PI system
which is an active directory user.
The owner wants me to use a local user instead.
Can this be done with a local user?

Similar Messages

Encrypt Data using File Receiver Adapter

Dear All,
How to encrypt file content using file receiver adapter?
Any suggestions would be of great help.
Thanks and Regards
Bhasker

Hi,
U can also develop custom adapter module code. For more reference plz have a look:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0ac06cf-6ee2-2c10-df98-e17430ca5949?quicklink=index&overridelayout=true
Re: Encyprtion in XI.
Thanks
Amit

Cant do a file get from external server using file sender adapter with ftp

Hi all,
Up until now our company has only used the file sender adapter with ftp protocol to get a file from our XI server for processing and input the file into an integration process
I have a requirement to do an ftp file get from an external server
From our XI development server I can ftp directly to the external server and view the required directory using the command window via a DOS prompt (FTP open ...). So all firewall issues and communications are fine
Unfortunately I cannot currently pull files from the external server using the XI file adapter with ftp protocol from the XI development server AWB017
FTP Connection Parameters: External server name using port 21, Data Connection is Passive, No security, I supply a userid and password
Processing Parameters: Processing Mode is Archive (I tried test but this did not work either)
No messages appear in the RWB
Is there something else that I need to set up in order for the external ftp get to work via the XI file adapter?
Regards,
Mike

Thanks for your responses.
I have found the error messages in the File Adapter Monitor
Scenario 1
When I prefix the source directory with a forward slash, eg /Folder/Subfolder the error message is as follows
EST: Error: Error connecting to ftp server 'ip address': FTPEx: /Folder/Subfolder: The system cannot find the path specified
Scenario 2
When I DO NOT prefix the source directory with a forward slash, eg Folder/Subfolder a different error message is returned
Error: Retrieving file 'FILENAME.XML' failed unexpectedly: FTPEx: Folder/Subfolder: The system cannot find the path specified
At least in this scenario the adapter has been able to identify the file on the external FTP site but cannot retrieve it
Questions
I thought that the backslash prefix for the source directory was mandatory but I am receiving an error in each scenario
I receive the same error message whether the Processing Mode is 'Archive' or 'Test'
The logs on the external ftp server seem to indicate that I am simply connecting, sending username and password then quiting straight away. I am not issuing any commands that they can see
I thought that being a Sender adapter it would inherently execute a Pull or Get command
To recap, from our XI development server I can ftp directly to the external server and view the required directory using the command window via a DOS prompt (FTP open ...). So all firewall issues, communications, userid and password are fine
Has anyone experienced these issues?
Please advise on next course of action?
Regards,
Mike

File receiver adapter with the same filename than sender

Hi guys,
I am experiencing a problem when I use the Adapter Specific Message Properties to be able to receive a file with the same name as the sender.
I've been following the example of Michal Krawczyk (XI: The same filename from a sender to a receiver file adapter - SP14) but i get a problem related with the content converter parameters.
The error I receice in the File Adapter is the next:
Could not process due to error: java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Consistency error: more fields found in XML structure than specified in conversion parameters!
I have been trying to do all the combinations with the content conversion parameters but the result is allways the same, MORE FIELDS FOUND IN XML ....
My XML structure is the next:
<ns0:MT_MDFranceN xmlns:ns0="urn:s-n:HR:MasterDataFrance">
 <lines>
 <line>
 <header/> 1..1
 <data/> 0...unbound
 </line>
 </lines>
</ns0:MT_MDFranceN>
In the header I write the name of the file with the code provided by SAP and Michal, so the name of the file is stored there.
any help?
Thanks!!!!!

I have changed the XML because, as you said, there is no need to introduce the filename inside the payload. Now the structure is the next:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_MDFranceN xmlns:ns0="urn:s-n:HR:MasterDataFrance">
 <lines>
 <line>
 <data/>
 </line>
 </lines>
</ns0:MT_MDFranceN>
Record Structure: lines,line
line.addHeaderLine 0
line.endSeparator 'nl'
lines.fieldSeparator 'nl'
line.fieldFixedLengths 1300
A sample of the payload is the next:
- <ns0:MT_MDFranceN xmlns:ns0="urn:s-n:HR:MasterDataFrance">
- <lines>
- <line>
<data>EDI_DC40_U5300000</data>
<data>E2HR_HD001 530000000000007802</data>
<data>E2HR_KY001 530000000000101TS 20070104000010 20070129</data>
000000601</data>
</line>
</lines>
</ns0:MT_MDFranceN>
And..... I still have the same problem, the same message in the file adapter:
 'java.lang.Exception: Consistency error: more fields found in XML structure than specified in conversion parameters
Any idea of what can be the problem?
thank you very much!!!

Content Conversion Parameter in File Receiver Adapter

Hi all,
I have created one File Receiver Adapter with Message Protocol 'File Content Conversion' and with the following configuration:
Recordset Structure: Message
Message.fieldFixedLengths: 1000
My Message Type is:
LogErro_MT
Message (Type: String) (Occurrence: 0..Unbounded) (Details: Min,Max Length: 1000)
But the file created by it has no data inside it. If I change the Message Protocol to 'File', the content of the file is the XML generated by the Outbound Proxy.
Would someone can help me?
Thanks in advance
Leo

Hi,
Please create a data type with
Records
Message ---0..unbounded
and hten MT for the same.
In the receiver file adapter:
Recordset Structure: Message
Message.fieldFixedLengths: 1000
Please check this weblog for the same:
/people/shabarish.vijayakumar/blog/2006/04/03/xi-in-the-role-of-a-ftp
IS this what you are trying to do.
Regards
Vijaya

HT204053 If I have set up my Mac with two different users, can I use two different Apple IDs on the same Mac?

If I have set up my Mac with two different users, can I use two different Apple IDs on the same Mac?

Each user account may have its own Apple ID.

How can you use iMessage between 3 iPads with 3 different users but only one Apple ID?

how can you use iMessage between 3 iPads with 3 different users but only one Apple ID?

No you do not need separate Apple ID's in order to use 3 devices with one Apple ID. I use 4 devices to Message and FaceTime and all use the same Apple ID. You do need to add additional email addresses for the other devices.
Look at this very informative video for the instructions.
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l

Whats the use of 'Maximum Councurrency' in File Receiver adapter?

Hi All,
Whats the use of 'Maximum Councurrency' in File Receiver adapter?
Xier

Hello,
Refer the below thread and check it out my reply . I gave for JDBC adapter, but the concept is same for File/JDBC.
Re: JDBC Adapter - One Connection prior to SP20
Best regards,
raj.

I had to do a complete system restore on my computer and now I am having issues getting all my music back. It's telling me that my account is in use with a different user but I'm the only user on my computer. When I go to sync it, it wants to delete all.

I had to do a complete system restore on my computer and now I am having issues getting all my music back. It's telling me that my account is in use with a different user but I'm the only user on my computer. When I go to sync it, it wants to delete all my music and ringtones. What should I do? I don't want to loose all my items.

When in recovery mode you can't backup the iPod.
You will have to restore via iTunes. See:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

How to use logon ticket in case of different user id with SAP R3

Hi.
I try to login from EP to SAP R/3 using Logon Ticket but
My problem is that EP, R/3 user id is different.
Is there any method to login SAP R/3 using Logon
Ticket in case of different user ID ?
Regards, Arnold.

Hi Arnold,
SAP Logon Tickets issued by the Portal contain two user ids, basically one for Java Systems and one for ABAP systems. See also note 843061 for details.
You do not need passwords for the reference system, if the user mapping is maintained by the user administrator, and the UM property ume.usermapping
.admin.pwdprotection is set to false, see http://help.sap.com/saphelp_nw04/helpdata/en/fe/d22a41b108f523e10000000a155106/frameset.htm. If you set the mapped user id programmatically, or if you retrieve it from an LDAP server, you also do not need to verify the ABAP password of the user (see https://media.sdn.sap.com/javadocs/NW04/SP12/ume/index.html and http://help.sap.com/saphelp_nw04/helpdata/en/0b/d82c4142aef623e10000000a155106/frameset.htm).
Best regards,
Joerg

File Receiver Adapter - time stamp in front possible ?

Hi all together,
is it possible with the file receiver adapter to add a time stamp in front of the filename?
f.ex. <timestamp>_SUFFIX.dat
With file creation mode "use timestamp" and file name scheme
SUFFIX_.dat it will create
SUFFIX_<timestamp>.dat .
Thanx a lot for your help
regards
Hans

Hi,
This is not possible in the communication channel, but if you want to add date time stamp on the filename, you can use dynamic configuration. For that you have to write an UDF in the message mapping concatenate the date tme stamp with the filename and extension.
In the communication channel you need to check on the message attributes so that when the adapter framework is called the filename generated in the message mapping would be used by the adapter. In the communication channel remove the filename and put * in the filename, as filename is one of the mandatory parameters in the comm channel.
Regards,
Indranil
Award points if helpful

Xml file in dynamic file name in file receiver adapter

Hi,
I'm doing the dynamic file name in file receiver adapter. I have done as per instructed in /people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i
All turned out okay. I have got the file name I require. Except that the file format is XML and I need to suppress the filename node occupied by the dynamic file name.
The content conversion mentioned in /people/sravya.talanki2/blog/2005/08/11/solution-to-the-problem-encountered-using-variable-substitution-with-xi-sp12, does not seem to solve my problem. As it is only for file format other than the XML one, because we only do the content conversion if we want to "convert" the format of the content from XML to the other format.
Does anybody have the solution to my problem? thanks in advance

Thank you Raj for the direction
The way to do it is :
1. In ID, advanced tab, put a check on the adapter-specific message attributes - file name.
2. Put a "*" on the file name scheme
3. In IR, create a UDF to set up target file name :
DynamicConfiguration conf = (DynamicConfiguration) container
.getTransformationParameters()
.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
// set up file name for receiver adapter
String SourceFileName = conf.get(key);
conf.put(key, TargetFileName);
return " ";
4. Map the above UDF to the header level of the target structure.
Regards,
Idi

Content Conversion in File Receiver Adapter

Hi,
I am doing a Content Conversion in File Receiver Adapter.
Input to the Adapter is:
<ns1:FileResponse_MT xmlns:ns1="http://www.bpmtest.com/bpm">
 <OrderID>123</OrderID>
 <Quantity>98</Quantity>
 <Price>76.23</Price>
</ns1:FileResponse_MT>
Desired output is: OrderID# Quantity# Price (123#98#76.23)
I tried to accomplish this with different settings in Recordset Structure and Conversion Parameters but could not achieve it, every time an empty file is produced.
Would appreciate any help on this.
Best Regards,

Hi,
Enclose your structure with a parent element like this.
<ns1:FileResponse_MT xmlns:ns1="http://www.bpmtest.com/bpm">
<parent>
<OrderID>123</OrderID>
<Quantity>98</Quantity>
<Price>76.23</Price>
</parent>
</ns1:FileResponse_MT>
Then give the parameters, it will work.
parent.fieldSeparator = '#'
parent.endSeparator = 'nl'
Regards,
P.Venkat

File Receiver Adapter - Content Conversion

Dear All,
We are using DB to file Scenario.We are using File Content conversion to get a File Comma Separated.
Data is picked up from the DB and our payload before getting in to File adapter is given below.
<?xml version="1.0" encoding="UTF-8" ?>
 <ns6:AssoInfo_MT xmlns:ns6="urn:NDB2File2DB">
 <AssoInfoList>
 <AssoInfoNode>
 <Name>ABCX</Name>
 <ID>31154</ID>
 <Salary>10000.0</Salary>
 </AssoInfoNode>
 <AssoInfoNode>
 <Name>ASDAS</Name>
 <ID>18978</ID>
 <Salary>10000.0</Salary>
 </AssoInfoNode>
 </AssoInfoList>
</ns6:AssoInfo_MT>
In File content conversion we are giving
 AssoInfoNode.addHeaderLine = 0
 AssoInfoNode.fieldSeparator = ,
 AssoInfoNode.endSeparator = 'nl'
We are getting output as
ABCX,ASDAS
But the expected output is
ABCX,31154,10000.0
ASDAS,18978,10000.0
What change we need to do in our File Receiver Adapter configuration.
Regards,
Vedavyas

Hello,
Test without these 2 options :
 AssoInfoNode.addHeaderLine = 0
 AssoInfoNode.endSeparator = 'nl'
I think your problem is with the "endSeparator", it is not necessary.
A new line is created for each new AssoInfoNode automaticaly.
Regards,
Chris

File Receiver Adapter - Writing Attachments

Hello Folks,
i received a SOAP Message with some attachments. Now i want to write these files into a file system.
No i have seen, that the file receiver adapter has no support for attachments. is there any solution for that?
Thanks for answers.
Best regards
Robert

Hi,
I thought of creating files in the target with different format... i think i understood ur query other way...
Fine...
U can do other way..
Convert ur Attachments to XML first...
Then Pass this XML to File adapter and recreate the Files in Target file adapter...
I hope u can do in this way
Babu

Using file receiver adapter with a different user

Similar Messages

Maybe you are looking for