Using File-XI-JDBC Scenario

Dear All,
I am having one scenario in which I have to update third party's SQL Tables with the data from a flat file. The data is stored in the flat file in the following way:
0000000119690607Sunjay                                  Shrivas
0000000419641029Shishir                                  Bhandarkar
0000000519671004Harvinder                               Singh
0000000619700101Shashi Kant                           Tiwari
0000000719690911Kamala                                  Rai
0000000819680914Vishav Bhushan                      Monga
0000000919610829Moloy                                    Mitra
In this file, first eight characters are for employee number, next eight are for date of birth of employee, next 40 characters for employee first name and then for employee last name.
Kindly guide me out in creating in the Data Types and Message Mapping for this scenario.
Warm Regards,
N.Jain

Hi
Have a look
jdbc /people/saravanakumar.kuppusamy2/blog/2005/01/19/rdbms-system-integration-using-xi-30-jdbc-senderreceiver-adapter
JDBC receiver
/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 - File to JDBC
use SELECT statement in JDBC
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1725 [original link is broken] [original link is broken] [original link is broken] [original link is broken]
stored procedure
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
/people/sameer.shadab/blog/2005/10/24/connecting-to-ms-access-using-receiver-jdbc-adapter-without-dsn
Sender adapter
/people/yining.mao/blog/2006/09/13/tips-and-tutorial-for-sender-jdbc-adapter
for jdbc adapter...
http://help.sap.com/saphelp_nw04/helpdata/en/22/b4d13b633f7748b4d34f3191529946/content.htm
for configuring receiver jdbc adapter...
http://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm
Might be useful.

Similar Messages

File to JDBC Scenario using stored procedure Question

Does anyone have an aswer (or have you seen a Blog that covers it) to the problem of having to do a table refresh before doing inserts in a file 2 jdbc scenario?
Essentially the details are as follows:
I have an input file that has all the data for a table (it's a complete table dump) of lets say userdata (username, name, hiredate).
I need to pass that to an oracle database via stored procedure(s). But before I start issuing my insert (via insert stored procedure) I have to somehow issue a delete statement to delete all the contents of the table I'm about to update. I'm on XI 3.0 and aren't sure what the best solution to this may be.
Again if there is a blog that covers this then if you could point me in that direction it would be great. Otherwise if anyone has any good ideas it would be appreciated.

Hi,
For structure refer this blog..
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
Use two <Statement> tags as shown here and there you may have separate tablenames.
http://help.sap.com/saphelp_nw04/helpdata/en/2e/96fd3f2d14e869e10000000a155106/frameset.htm
Thanks,
Jogula Ramesh

Test cases for File to JDBC scenario?

Hi Experts,
I would like to know what are the things needs to be tested to ensure that the File to JDBC scenario holds good in the PI box. Your valuable inputs are required to verify /check my scenario configuration is free of errors.
Thanks & Regards,
Pcv.

Hi,
You can try the following:
1) If the end systems require authentication and the same is not provided in PI then it should throw an error.
2) Check what happens when you dont give a mandatory field.
3) check what result you will get when you give a wrong input.
4) Check whether all your restrictions (in mapping and/or in receiver determination) are working properly.
5) Check what you need to do when the target system is down.
6) If using any FCC then check whether the conversion is done properly.....
7) See to it that you have defined a proper DB structure when you are communication with JDBC
8) Check with the end system whether your statement (Insert/Update/Delete etc) is performed properly
Regards,
Abhishek.
Edited by: abhishek salvi on Dec 4, 2008 9:58 AM

Error in File-XI-JDBC Scenario

Dear All,
I am working on File-XI-JDBC scenario which is using stored procedure (SP_UPDATE). When I am processing the file it is giving me the following error in the message monitoring:
Unable to execute statement for table or stored procedure. 'SP_UPDATE' (Structure 'Statement') due to java.sql.SQLException: ERROR: Invalid XML document format for stored procedure: 'type="<SQL-type>"' attribute is missing for element 'access' (Setting a SQL-type (e.g. INTEGER, CHAR, DATE etc.) is mandatory !)
Please guide me what is this error all about and how this can be resolved.
Warm Regards,
N.Jain

Dear All,
Now, I am able to update the SQL Server database but only one record is coming at the target. Can anyone please guide me what is he error in my Data types o in my mappings. Following is the source Data Type:
MT_TEST_FILE_T179T      1..1     DT_TEST_FILE_T179T
     ROOT                         1..unbounded
        PRODH                    1..unbounded     xsd:string
        VTEXT                      1..unbounded     xsd:string
        DATUM                     1..unbounded     xsd:string
Following is the target Data Type:
MT_TEST_JDBC_T179T      1..1     DT_TEST_JDBC_T179T
     STATEMENT                1..1
        SP_UPDATE             1..1
            action                    required     xsd:string
            TABLE                  1..1                     xsd:string
                PRODH             1..unbounded     xsd:string
                   type               optional            xsd:string
                VTEXT               1..unbounded     xsd:string
                   type               optional            xsd:string
                DATUM              1..unbounded     xsd:string
                   type               optional            xsd:string
Following are the mappings done:
EXECUTE-->@action
storedprocedurename-->TABLE
PRODH-->PRODH
VTEXT-->VTEXT
DATUM-->DATUM
CHAR-->@type.
With this stucture and mapping i am able to insert only one recored in the database even though there are multiple entries in the file.
Please guide me in solving this error so that multiple records can be inserted.
Warm Regards,
N.Jain

File to Jdbc Scenario

Hi All,
       I am doing a File to JDBC scenario, where sender side message type occurance is 0..unbounded and receiver side message type occurance is 1 in message mapping. The whole scenario working fine when both sender and receiver side message type occurance is 1 in message mapping.
When Sender side occurance is 1.
<?xml version="1.0" encoding="UTF-8"?>
<ns0:mt_smtjdbc_sender xmlns:ns0="http://SmartJDBC">
   <NAME>A</NAME>
   <DEPT>B</DEPT>
</ns0:mt_smtjdbc_sender>
When Sender side occurance is 0..unbounded.
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
   <ns0:Message1>
      <ns1:mt_smtjdbc_sender xmlns:ns1="http://SmartJDBC">
         <NAME>Dip</NAME>
         <DEPT>xi</DEPT>
      </ns1:mt_smtjdbc_sender>
   </ns0:Message1>
</ns0:Messages>
If I use Sender side occurance as 0..unbounded I am getting the following error in adapter engine Communication channel monitor (for receiver communication channel)
Error while parsing or executing XML-SQL document: Error processing request in sax parser: No 'action' attribute found in XML document (attribute "action" missing or wrong XML structure)
Can anybody please help me how to solve this problem?
Dipankar

Hi,
My Sender side structure as follows.
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
   <ns0:Message1>
      <ns1:mt_smtjdbc_sender xmlns:ns1="http://SmartJDBC">
         <NAME>DIp</NAME>
         <DEPT>XI</DEPT>
      </ns1:mt_smtjdbc_sender>
   </ns0:Message1>
</ns0:Messages>
My corresponding Receiver side structure as follows.
<?xml version="1.0" encoding="UTF-8" ?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
<ns1:mt_smtjdbc_receiver xmlns:ns1="http://SmartJDBC">
<Statement>
<dbTableName action="INSERT">
<TABLE>SMARTOP</TABLE>
<access>
<NAME>DIp</NAME>
<DEPT>XI</DEPT>
</access>
</dbTableName>
</Statement>
</ns1:mt_smtjdbc_receiver>
</ns0:Message1>
</ns0:Messages>

Error comming in File to JDBC scenario.

Hi Frnds,
I am trying to do the File to JDBC scenario and is using the SQLServer.
After processing the message, it is showing executed successfully in moni but for the receciver communication channel i am getting the error like---->
Error during database connection to the database URL 'jdbc:sqlserver://10.112.132.211:1433;databaseName=DemoDB' using the JDBC driver 'com.microsoft.jdbc.sqlserver.SQLServerDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Cannot establish connection to URL 'jdbc:sqlserver://10.112.132.211:1433;databaseName=DemoDB': SAPClassNotFoundException: com.microsoft.jdbc.sqlserver.SQLServerDriver'
What could be the possible solution for it.
Thnx
Raj.

Hi Raj,
As Prateek mentioned, the error you are getting is because of an improper installation of a driver.
Check out the doc for the driver installtion steps : [How To Install and Configure External Drivers for the JDBC & JMS Adapters|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f04ce027-934d-2a10-5a8f-fa0b1ed4d88f]
Also, the following thread contains some more useful links : Re: What's necessary to connect SQL server to XI?
Thanks,
Pooja Pandey

File-XI-JDBC Scenario

Dear All,
I am working on File-XI-JDBC scenario. I am able to update the SQL database with the file.
My SQL database is having following columns:
MATNR MATXT DATUM
Now, I want is that even if the MATNR is already existing in the database then again that entry should not be inserted into the database with the different date although the same MATNR exists in the flat file.
Please guide me on how this can be done.
Warm Regards,
N.Jain

HI,
Check out the weblog and help for writing stored procedure:
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
/people/sriram.vasudevan3/blog/2005/02/14/calling-stored-procs-in-maxdb-using-sap-xi
http://www.ics.com/support/docs/dx/1.5/tut6.html
http://java.sun.com/docs/books/tutorial/jdbc/basics/sql.html
http://www.sqlteam.com/article/stored-procedures-an-overview
Thnx
Chirag

Mail on successful processing of message in File-XI-JDBC scenario

Dear All,
I am working on File-XI-JDBC scenario. I want a mail to be triggered if the message is successfully processed at JDBC receiver side.
Kindly guide me on how this can be acheived?
reg,
NJ

Use a BPM.
In the send step that is used to send the message to JDBC, request a Tech Ack.
If positive Ack is returned trigger the email in a separate step.
Check Michal's blog on BPM Acknowledgements that explains this in details.
Regards
Bhavesh

Facing Problems in File to JDBC scenario

Hi Folks,
I am trying to configure a file to jdbc scenario where I'm getting the below error.
Error during database connection to the database URL 'jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=D:\usr\sap\PRD\SYS\global\Receive\Student.mdb' using the JDBC driver 'sun.jdbc.odbc.JdbcOdbcDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Cannot establish connection to URL 'jdbc:odbc:Driver={Microsoft Access Driver (.mdb)};DBQ=D:\usr\sap\PRD\SYS\global\Receive\Student.mdb'*: SQLException: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified'
I Have done the below configuration for the receiver JDBC adapter
Driver : sun.jdbc.odbc.JdbcOdbcDriver
Connection : jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=D:\usr\sap\PRD\SYS\global\Receive\Student.mdb
tried to provide the user id & password as well as the password and also tried with with keep them blank. My Ms access 2007 database table is in the application server itself.
I've also checked with the below blogs & forums:
MS ACCESS 2007 to PI 7.01
/people/sameer.shadab/blog/2005/10/24/connecting-to-ms-access-using-receiver-jdbc-adapter-without-dsn
http://www.riyaz.net/blog/jdbc-adapter-configuration/technology/1200/
Thanks Experts.

Hi Santosh,
If also could be possible that, you have not added proper JDBC dirver and hence i think you are getting following error:
Data source name not found and no default driver specified'
So first add the JDBC driver( .jar) to the SAP PI JDBC library and redeploy the .sda file and then retest your scenario. Here is a link to PDF which explain how to add external drivers to use new DB drivers in the JDBC adapter.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f04ce027-934d-2a10-5a8f-fa0b1ed4d88f?quicklink=index&overridelayout=true
Regards,
RK

Regarding File 2 JDBC Scenario

Hi Friends,
can anybody help me on file 2 jdbc scenario. here my input file is not picked but in moni it is showing black flag. and in message monitoring in adapter engine sender side interface status is successful but receiver side interface status is waiting and i am not getting the output in my database table.please help me one this issue

Hi Uday
Kindly check your server and port whether they are up
go to transaction SM49 and click on PING then in the next string give your server and port address and press F8
you will get the actual status of your server
also
You have to deploy the required JDBC drivers for the database before making connection. Ask the database provider or your vendor for the divers. That should be deployed using SDM tool
Start visual admin of XI and select service "Deploy" and then select option "Deploy and start" to select file and deploy it
now here is the steps to deploy this module.
How to deploy adapter module in production
Three option available:
1. Using SDM
2. Using Visual Admin
3. Using NW development studio (Not available for Production)
We will use Visual Admin Deploy deploy service to deploy EAR file of adapter module.
Steps:
1. Goto VM->Deploy service
2. Select option Deploy and start
3. Select EAR file provided for deployment
4. Restart the service.
5. Done
follow this guide
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70ffd890-0201-0010-708f-d5dad2dfcf3a
good luck
regards
Sandeep
If helpful kindly reward points
Edited by: sandeep sharma on Apr 19, 2008 7:46 AM

Strange error in File-XI-JDBC scenario

Dear All,
I am working currently on File-XI-JDBC scenario and is facing with a stange problem.
I have writtern one simple query which is downloading the data from R/3 and is sending to XI Server local folder. From that folder File is getting picked by XI and is posted into SQL database.
Now, when I am generating the required file from R/3-DEV server then my scenario is getting executed successfully but if file is generated thru R/3-QAS Server then the scenario is giving the following error "Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'MARA_UPDATE' (structure 'Statement'): java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]Error converting data type nvarchar to smalldatetime."
Also, if I am copying the complete data from the error file and paste it into a new file and executing again then the scenario is executing correctly.
I have checked the payload and didn't find anything there.
Kindly help me in solving this error.
Regards,
N.J

Hi Farooq,
Thanx for your reply. But this scenario is running when we are sending the file from R/3-DEV Server and also if I am copying all the contents of the error file and pasting it into a new file and then processing the file then the scenario is getting executed and I am getting no error with the same data which I have processed earlier and has thrown error.
Reg,

Exception in File To JDBC Scenario

Hi,
I am getting the Exception "Error ID EXCEPTION_DURING_EXECUTE" while working with File to JDBC Scenario.
Pl Let me know why this exception is raised?
Thanks,
Srini

Hi Srinivasaphani,
This indicates that your message mapping failed.
Copy the XML message from monitoring and exectute the mapping in Integration Builder with maximal trace to get the reason.
If Source is a flat file then maybe your encoding is not ok....
if so have a look at
File Encoding section:
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
Also go through this link:
/people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios
Also go thru XI pipeline services-
http://help.sap.com/saphelp_nw2004s/helpdata/en/41/b714f85ffc11d5b3ea0050da403d6a/content.htm
Regards,
Abhy

The Resource Pool has already been destroyed - File to JDBC Scenario

Hi,
Error : "Error when attempting to get processing resources: com.sap.aii.af.service.util.concurrent.ResourcePoolException: The resource pool has already been destroyed"
Scenario : This error is occurring for the File to JDBC Scenario .
Could you please let me know why am getting this error and solution to resolve this error..
Thanks in Advance!!
Regards,
Sekhar

Hi ,
Thanks for the replies..
Just to add to have more clarity on the error for the scenario
Scenario : This error is occurring for the File to JDBC Scenario
The Scenario has a BPM involved.The synchronous send step within the BPMsends the data to the JDBC receiver adapter.The response from the JDBC
adapter is throwing the below error.
Thanks,
Sekhar

Sending an excel sheet of to mail Ids using file to mail scenario

Hello,
I have a folder with three folders archive exception and log. Log folders have the details of exception. I want the XML files that are in Exception, to be sent to resp email ids with the data in it to be stored in an excel sheet( data will be collected from the log file for the correspondng file in exception).
eg: if test.xml is in exception its log will have an exception detail somethng like " Enter a value".
In this case i want to give the exception details as well as some relevant details with it like material number etc , time at which the exception occured . These details are to be given in an excel sheet .
Is it possible to do using file to mail scenario. Please help by explianing the procedure.
Regards.

This can be done with the help of some Java and ABAP coding. I can give you a general view on how to do this.
1. Configure a file adapter for sender to pick up the exception files.
2. While doing the mapping, create a UDF to store the values (which you need to send it to excel file) in a table in ABAP Stack.
3. Create a ABAP Program in R3 (which can be schedule on regular intervals depending on ur req) to create an excel sheet based on the the data in the table (created in previous step). I am not sure how easy to code ABAP program to create an excel sheet.
4. Create one more file adapter to send this excel sheet to the corresponding mail ids.
This is a very high level view on doing this.

Clarification of doubt in File-XI-JDBC scenario

I had one doubt in this scenario.can anybody Plz clarify in this scenario File-XI-JDBC.
1)where we have to specify the table name in the receiver JDBC comm channel to insert the data into sql database from file.My doubt is,there are so many tables in existence.in the comm channel i am not mentioning the table name any where.
currently i am using SQL server and created one table name "EMP" with n columns.
2)Is i need to configure this sql driver to the J2ee server or by default this will be shipped with XI?
3)Generally,what are the datbase drivers shipped with XI?
Thanks in Advance
Sridhar Raju

Hi Sridhar
1) You dont require to mention the name of table in comm channel. You specify it in your data type . your xml format should be
<root>
<StatementName1>
<dbTableName action=UPDATE | UPDATE_INSERT>
<table>realDbTableName</table>
<access>
<col1>val1</col1>
<col2>val2new</col2>
</access>
<key1>
<col2>val2old</col2>
<col4>val4</col4>
</key1>
<key2>
<col2>val2old2</col2>
</key2>
</dbTableName>
</StatementName1>
Please refer the link for more detail
http://help.sap.com/saphelp_erp2004/helpdata/en/2e/96fd3f2d14e869e10000000a155106/content.htm
2) Basically there is an driver file which has to be deployed to the server. But it may be there by default.
You configure and check your scenario, if driver file is not deployed you will get the message in RWB-> Adapter Monitoring.
Regards,
Mitesh.

Using File-XI-JDBC Scenario

Similar Messages

Maybe you are looking for