Using iMac as display for my xbox one ?

hi i have a 27-inch, Late 2013 imac and i was wondering if there was a way to use it as display for my xbox one ?

ghaith edrees wrote:
hi i have a 27-inch, Late 2013 imac and i was wondering if there was a way to use it as display for my xbox one ?
Sorry, no.

Similar Messages

  • Using iMac as display for Xbox One

    I have the latest iMac
    http://www.apple.com/uk/imac/specs/
    Would there be any way I could connect the new XBox One to the iMac screen and use it as a display?
    Here is the rear of the Xbox one, anybody have a idea?
    Many thanks
    xbox-720-hardware-ports-640x360.jpg

    You cannot. Target Display mode only works with other Macs. There are exceptions with Late 2009 and Mid 2010 27-inch iMacs that could be used as an external display for some PCs, but nothing else.
    There's an adapter that allows you to connect a Xbox 360 or PlayStation 3 to one of those iMacs and use them as an external display, but it does not work with Thunderbolt iMacs like yours. In conclusion, you cannot use the iMac as an external display for the Xbox One

  • Can I use my late 2013 Macbook pro as a display for my xbox one. I am currently sick with the flu and I do not have a tv in my room. Is there anyway to use the hdmi port on my mac and connect it to the xbox one?

    I am currently sick with the flu and in my room I dont have a tv. I tried plugging my xbox one's hdmi into the hdmi port on my macbook pro late 2013 retina display. I even tried connecting the hdmi cable to a hdmi mini display mort converter and that didnt work. How can I use my Macbook as a monitor to play game on

    I would guess that the HDMI port on your mac is for output only - no input, and that's what your'e attempting to do when you attach the mac to your xbox. I looked in Mactracker and it lists the HDMI port as video output for both the 13" Retina MacBook Pro and the 15" Retina MacBook Pro (your post didn't say which one you have), so looks like that is the issue..

  • Using iMac as display for Windows 7 (thunderbolt to thunderbolt)

    I currently have a 27-inch Mid 2011 iMac running OS X Yosemite, and my company has issued me a Lenovo W540 that is running Windows 7 and has a thunderbolt port (not mini-display -- yes, I'm sure).
    I have spend countless hours trying to use my iMac as a display for my laptop, but have had no luck. When I plug the iMac into the laptop, my laptop does recognize my iMac as a "Base System Device", but when I go to the System Information on my iMac it recognizes that a cable is connected, but says there is "No device connected" to my Thunderbolt ports, and attempting Target Display Mode (Cmd + F2) has no effect. So, has anybody ever gotten this to work? Is there a separate set of drivers that I need to install on my Windows laptop to recognize my iMac as a display?
    I have done virtually hundreds searches on this, and haven't found anything that relates to my specific case. Is this simply not supported? I appreciate any help that can be provided!

    Hello Allan,
    I appreciate your response. I have read that a Mac running Windows with Bootcamp can use TDM, so I expected it would be a matter of installing proper drivers, but, unless anybody else has had some success, I think I'm about ready to admit defeat.
    I appreciate you proposing a software solution, however, ScreenRecycler only supports using a Windows PC as another display, not the other way around. I did play around with a couple other software solutions, but none of these solutions would work well once my work PC is connected to VPN.
    I guess I'll continue to work off a small laptop screen while a giant 27-inch screen on the same desk goes unused. Very frustrating.

  • Can I use iMac as display for new mac mini?

    can I hook my early 2008 24" Core 2 Duo iMac to a new Mac Mini to use as a display?
    I love the display, but my iMac is getting too slow, even with the maximally upgraded RAM to 4 GB.  I don't want to get rid of my iMac, so I was thinking of buying a Mac Mini to attach it.
    I'm worried that the OS X Yosemite will make my iMac even slower.
    Any suggestions? 
    Nick

    Not without a standalone monitor; that iMac doesn't support video in.
    (112620)

  • Using iMac as display for laptop PA

    I have a work laptop connected to a docking station that I would like to send video over to my 2012 iMac.  Is this possible?  The docking station has ports for VGA, DVI, and displayport and I need to find out a way to get the image from there to the iMac's mini displayport/thunderbolt. 

    Some Mac with DisplayPort/Thunderbolt support "Target Display Mode", which allows a Mac to become a dumb monitor for another DisplayPort/Thunderbolt capable computer.  Not sure if your Mac supports "Target Display Mode" or not.  Also not sure if your PC will send the correct signals to enable that.
    <Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support>
    You could use Microsoft's Remote Desktop software from your Mac to display the PC's desktop on your Mac (I assume the PC is Windows based).
    <https://itunes.apple.com/us/app/microsoft-remote-desktop/id715768417?mt=12>
    There is a software product called Screen Recycler that may be able to make the Mac into a monitor for the PC
    <http://www.screenrecycler.com/ScreenRecycler.html>
    Also see: "Air Display"
    <http://avatron.com/apps/air-display>

  • How to use the second display for installation OS in my vertical lines iMac

    My 17" iMac display is full of vertical lines, it is unuseable. Does anyone know how to use the second display for Mac OS X or disable the first display for installation Mac OS x ?

    Go to: *System Preferences > Displays* and select the Arrangement tab, then relocate your Menu bar by dragging it to the other display.
    Unfortunately there is no Hardware or Software switch to turn off the iMac's Internal Display.

  • Using a iMac as display for the Powerbook?

    Can an iMAC computer be used as a display for the Powerbook laptop? Could I use the iMac keyboard plugged into the Powerbook and maybe the iMac mouse as well?

    Does ScreenRecycler do what you want?
    (43378)

  • Can I hook up my Dell Latitude for using iMac as display?

    the Dell has VGA & HDMI so I wonder if it will work using a Moshi Mini DisplayPort to HDMI-adapter or similar?

    If I understood you, you want to use your iMac as a display for the Dell Latitude.
    See > http://support.apple.com/kb/PH11302 27-inch iMacs and iMacs with Thunderbolt ports can be used as a display, and Apple says that this feature works only for other Macs.
    That's not exact and that's not the truth because an iMac can be used as a display for PCs, but the PC must have a DisplayPort or a Thunderbolt port. If your PC hasn't got DisplayPort, you can't use the iMac as a display

  • Can the new iMac be used as a display for my mid 2010 MBP?

    I am considering buying a 2011 iMac and was wondering if the new iMac can be used as a display for my mid 2010 MBP.
    I know that the new iMac has a thunderbolt display ports, and my macbook pro does not.

    You're referring to Target Display Mode Mid 2011 iMacs  this letter will explain how it works or in your case will not work () with your mid 2010 MBP. Sorry to be the bearer of bad news.

  • Can i use a thunderbolt display for my macbook pro and hp laptop with windows 7 and what adapters will i need

    Can i use a thunderbolt display for my macbook pro and hp laptop with windows 7 and what adapters will i need

    Hi jayhrab,
    Currently, the system requirements listed for an Apple Thunderbolt Display are:
    Thunderbolt-enabled Mac computer, including MacBook Air, MacBook Pro, Mac mini, and iMac
    OS X v10.6.8 or later
    Apple - Thunderbolt Display - Read the tech specs.
    Regards,
    - Brenden

  • Didn't receive $10 reward certificat​e promotion for Elder Scrolls for the Xbox One

    One of the reasons I preordered Elder Scrolls Online for the Xbox One was the $10 reward certificate promotion that was going on. It has been over a week since I picked up the game, and I still haven't received the promotion, but my points issued for the game. Can you please check in to this and issue me the promotion? I was trying to use the promotion to make a purchase, but if I can't get it soon then I'll likely make my purchase from Amazon. Thanks in advance.

    Hello cjstingray,
    I hope you're enjoying The Elder Scrolls: Online!  I just picked up the game yesterday.  
    I was able to locate your My Best Buy account and the points were allocated to your account for the pre-order on 4/30/2015.  You can view your current point totals by clicking the link above.  Let me know if it's not reflected on your account and I'll further investigate.  
    Blake|Social Media Specialist | Best Buy® Corporate
     Private Message

  • Can we use same program ID for more than one RFC scenarios

    Hi experts,
                I am working on a RFC to FILE scenario. I have created one TCP/IP connection in SM59 with a program ID. Can we use this program ID for more than one scenario. I have written code as below
    data: iquote type standard table of ZIQMD initial size 0,
          IPRODUCT type standard table of ZPMS initial size 0,
          wa_quote type ZIQMD,
          wa_PRODUCT type ZPMS.
    CALL FUNCTION 'Z_CBT_RFC_QUOTEMASTER'
      TABLES
        I_QUOTE       = iquote          .
    CALL FUNCTION 'Z_CBT_RFC_QUOTEMASTER' in background task DESTINATION
    'ID4'
      TABLES
        I_QUOTE       = iquote          .
      COMMIT WORK.
    CALL FUNCTION 'Z_CBT_RFC_PRODUCTMASTER'
      TABLES
        IPRODUCT       = IPRODUCT          .
    CALL FUNCTION 'Z_CBT_RFC_PRODUCTMASTER' in background task DESTINATION
    'ID4'
      TABLES
        IPRODUCT       = IPRODUCT          .
        COMMIT WORK.
    when i am executing the code like this. i am able to send the data to 'Z_CBT_RFC_QUOTEMASTER'  , but iam not getting data  for 'Z_CBT_RFC_PRODUCTMASTER'  interface. ID4 is the connection that i have created in SM59. with program ID as ABCD.
                  Can i use the same connection for all interfaces.Please help in this, if we can use same connection for all interfaces. then how to make changes in XI.
    Thanks in advance.
    Thanks & Regards,
    Poorna.

    Just tried this and I can confirm that my earlier understanding was correct!
    One of my colleagues confused me out and the conclusion is,
    1. You need a separate TCP IP Connection for every interface with a Unique program ID.
    Regards
    Bhavesh

  • I have one account, but use it as two for years.  One is home, one is work.  Recently we upgraded to Windows 7 at work and a new email system.  Now I can't download music at work; work tech support can't help but said to use my work email address. Failure

    I have one account, but use it as two for years.  One is home, one is work.  Recently we upgraded to Windows 7 at work and a new email system.  Now I can't download music at work; work tech support can't help but said to use my work email address. Failure.
    Could it be a new work firewall associated with the upgrades?  How can I resolve this?

    I have one account, but use it as two for years.  One is home, one is work.  Recently we upgraded to Windows 7 at work and a new email system.  Now I can't download music at work; work tech support can't help but said to use my work email address. Failure.
    Could it be a new work firewall associated with the upgrades?  How can I resolve this?

  • Using 27" iMac as display for a gaming PC

    Before anyone rips me to ribbons for wanting to use an iMac as a display for a windows PC, let me explain my situation: I need to upgrade my 2007 iMac and I was looking at the 27" iMac. I would like use it as a monitor for my gaming PC when I'm not using it as a Mac because I barely have enough room on my desk for my old iMac and gaming PC monitor as it is. A 27" iMac will take up my whole desk and won't fit with any other monitor. I'd just get a bigger desk, but my studio apartment is too small and cluttered for one.
    I know there is the Atlona DVI to Mini DisplayPort Converter, but after hours of searching, I could only find articles saying "it should work with PC" not "I tested it and it does work with PC. Here are some pictures as proof". I'm not willing to spend that much on something that might work.
    I was wondering if anyone knew of a site that gave proof that the Atlona DVI to Mini DisplayPort Converter worked the way I hope it does? or does someone know of something coming out in the near future that would allow what I need?

    I have exactly the same problem and have been scouring the forums to find an answer. Hoping to use my shiny big iMac as a display for my gaming PC which only has a DVI output. From what I've read I get the impression the answer is currently no (some problem specific to the 27" iMacs from what I can make out), but out of interest have you had any luck with this??
    The only answer I can find round this at the moment (if the converter you mention doesn't work) is to get a new graphics card with a DisplayPort output - still weighing up whether to splash out on a new one and what the chances are of me screwing up my PC if I try installing it myself!!

Maybe you are looking for

  • COMPUTE INDEX vs. SYS.DBMS_STATS.GATHER_INDEX_STATS

    Hi, I've got an Oracle 9 database. I am creating an index. I had created this index using the following syntax: CREATE INDEX index1. . . . . . COMPUTE STATISTICS; One of my colleagues tells me that I should scrap 'COMPUTE STATISTICS' and instead make

  • Dynamically populate pdf File name in 'Save As' dialogue box

    We have  rendered a pdf using adobe webservice. Once the pdf is generated , and we click on saveAs menu dialogue box opens and default name is populated in fileName field. Can it be possible to populate that name dynamically ? We tried using response

  • Unable to clear Stock from Inventory

    Hi All, We have a issue where in user is unable to clear stock from inventory , basically these stocks are sales order stocks. When we check for sales orders they are not available in the system now. When we try to do MB1B using movement type 413E, w

  • Mac Mini Mavericks won't sleep. Why

    Processor  2.6 GHz Intel Core i7 OS X 10.9.5 (13F34) Mini will not sleep either with command from Apple Menu nor opt/com Upper right arrow combo Energy Saver Settings on 10 minute default

  • Database or text file

    Since I was able to get my first question answered so quicky (thanks again), I wonder if I could get an opinion from the experienced programmers here. I am creating a computer forensics application to verify file signatures found in the header , to t