Using iPhone 3G ,Version 4.2.1,Modem Firmware 06.15.00, In this phone i was using Facebook upgraded app and Smart Sync App. Suddenly my sisiter reset all setings and now I can't use the upgraded facebook app, for smart sync is asking for IOS 4.3,Need help
Using iPhone 3G ,Version 4.2.1,Modem Firmware 06.15.00, In this phone i was using Facebook upgraded app and Smart Sync App. Suddenly my sisiter reset all setings and now I can't use the upgraded facebook app, for smart sync is asking for IOS 4.3,Need help.
Thank you for the answers so far, but I'll make one correction: I said earlier that the Boston Globe website, boston.com, does not have a mobile site, and I would need to visit their regular website on my iPhone. Actually, I just found out that boston.com has a mobile site, so I'd obviously use that instead of the regular site. By doing that, I'd save a ton of data (I think). Does that change your answers?
Similar Messages
-
So as the title says, after I got my iPhone 5s from apple, factory unlocked, my brother used his sim card in it for a moment to allow it to be registered and usable on WIFI until I made it to Japan. Now that I have a data SIM card, I have to input specific APN settings, which are located in settings>cellular>cellular data network, however, cellular data network is not available as an option. I have reset the phone multiple times with and without backups and with and without the new sim in the phone. I have also used the configuration utility to try to put the APN settings in the phone. I contacted Apple and they didn't really have an answer as to what i should do. My brother checked his Verizon account and my phone does not show up as one of his devices, so right now I'm stuck with and incredibly expensive iPod. Does anyone have any idea what I can do to remedy this? I am unable to contact Verizon via telephone myself as I have no phone service. Any help would be greatly, greatly appreciated.
You only have to clone your mac when using certain cable modem. You don't clone your mac when using dsl.
Greetings from Northern Ontario, Canada -
Here's the story. I am a long-time Palm power user and I have rarely been stumped but I am very stumped right now. I have used my Palm T|X for several years without any sync problems. I upgraded to a new Palm Treo 700p (Verizon) so I can carry one device instead of a PDA and a cell phone. I initially migrated my data from the T|X to the Treo 700p with no major issues. The Treo 700p worked fine for a couple of weeks until I started using the camera. After I started taking pictures and storing them in the on-board memory, wierd things started happening such as screen freeze-ups, screen white-outs, and processor delays. After talking with other Palm users, I was informed that this behavior is typical of the 700p when pictures are stored in on-board memory and that I should move the pictures to my SD card.
I moved the pictures to the SD card and perfomance improved. However, after another week or so, the freeze-ups started again. Everyone that I know who has a 700p or 700w reports the same issues so I'm starting to believe that the 700p has design flaws or bugs that were never fixed. Due to the frustration and productivity losses that I sustained with the Treo 700p, I decided to revert to my trusty T|X.
I initially started using the Treo on 8/12/2009 and I synchronized the T|X to the desktop before synchronizing the data to the 700p. On 09/16/2009 I started trying to re-synchronize the T|X. I did a hard reset and memory clear on the T|X so all of the updated data in the desktop could come over to the T|X without duplicates. However, when I synchronized the T|X, my data was only updated as of 8/12/2009 even though the palm desktop has data updated up to 9/16/2009!!
Please explain what is keeping all of the updates from coming over to the T|X. Thanks for the help.
Post relates to: Treo 700p (Verizon)Are you sync'ing the 700p to the same username in Palm Desktop as the TX?
If you are, this will cause problems on the new device. When you sync the device, it saves the device settings, 3rd party apps, preferences, etc. in the backup folder in the username folder on the PC. When you sync the new device it copies the contents of the backup folder for the old device to the new device. This will cause corruption in the settings for the new device thus causing erratic behavior of the new device. The TX does not have a camera and you are sync'ing the backup folder for theTX that does not have a camera app. to the 700P.
Click on the following link to the kb.palm.com webpage for the article regarding Upgrading from a previous Palm OS handheld.
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=12926
I would suggest exporting the data from the current username, create a username for the TX and import the data to that username and only sync the TX to that name. You will need to rename the backup folder in the current username to backup.old, hard reset the 700P and sync to the current username. You will need to hard reset the TX once you have the data in Palm desktop in a seperate username to remove the backup folder contents on the TX.
The best way to preserve your data is to export the data in each category in Palm Desktop to a seperate folder on your PC.
Create a new folder on your PC somewhere that is convenient. Name it something like Palm Desktop Data. Click on the link below and follow the instructions on that page for the export procedure.
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=28734
Make sure you select all for the range in the export window.
With the data saved in the folder you created, make a copy of that folder and save to a flash drive, cd-rw or external hard drive.
Anytime you make a change in Palm Desktop, export the data that was changed to that folder and save again to the external media.
With this process you can always import the data back into Palm Desktop anytime you have a problem with the data in Palm Desktop or if your computer/hard drive/device crashes.
For reference purposes, click on the following link for the support page for your 700P device on the kb.palm.com webpage.
http://kb.palm.com/wps/portal/kb/na/treo/700p/verizon/home/page_en.html
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.
For reference purposes, click on the following link for the support page for your TX device on the kb.palm.com webpage.
http://kb.palm.com/wps/portal/kb/na/treo/700p/verizon/home/page_en.html
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.
Message Edited by cygnusX1 on 09-18-2009 03:33 PM -
I tapped the "Reset All Accounts" button under settings (Yahoo Mail). Now, I can't access my (Yahoo) email from my iPhone. How do I re-set to the way it was?
If it still shows up under your accounts you would want to tap on it and then tap on the email address. You should see the option to sign out, do so and then re-add the account by hitting add account from settings> Mail contacts and calendars.
If the accounts are not on the device start at re-adding the accounts.
If you need the server settings you will need to contact Yahoo. -
So what I was meaning to do is to import a CD that I wanted to have put on my iPod Touch. But I didn't realize that I was also importing all of my songs from my iTunes Library on my computer, which I already have on my iPod. So, after the sync was done, I opened up my music, on my iPod, to see if it had synced successfully. And sure enough, it was there, but almost all of my albums are now artless! It's really helpful for me to see the artwork, so that I know what songs are in that particular album, so it's really important that I have the artwork. My computer is a PC, and when I imported the CD, I used the AAC encoder, and used the iTunes Plus setting. Please help, and thank you!
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
Howdy.
Ok, wanted to update my daughter's MacBookPro (late 2009 - 2.26ghz - 8GB RAM) I took a new external and partitioned into two GUID partitions. Installed Lion on one, and did a full (and verified) backup on the other. Booted off the external, erased the laptop drive and installed Lion. Works perfectly.
But when I try and access the Time Machine backup, I can't even see the partition. The icon is on the Desktop, the partition is in Finder. When I first instaled it even asked if I wanted to use that partition for Time Machine. But I can't do anything but a full restore, which I obviously do not want.
I tried going into Time Machine itself and when asked if I wanted to "Use Previous Disk" to do TM backups, I said yes. But I could not get the Mac to "inherit" the old backup.
Migration Assistant doesn't see the partition either.
Help?First I formatted 2 partitions GUID on the external and installed Lion into one of them., and backed up the Macbook (via Time Machine) into the other. I then booted off the external Lion partition, erased the Macbook, installed a fresh Lion.
I then restarted using the new internal Macbook drive. Works perfectly. But now, when I try to use Migration Assistant I cant see the second partition, the one with the Time Machine backup.
I know I can do it manually but actually the computer is with my daughter at college in Arizona and I'm in Connecticut, so I'd rather get to the screen that allows you to restore users and settings only.
Thanks! -
I had subscribed to the full CC program and then stopped it.
Now i have an emergency need to just Photoshop 6 (is that also cc?).
I learned on short notice that I will be teaching a Photoshop a full day this Thursday and need to plan today.
Could someone please help me download either the free trial or the monthly subscription for Photoshop asap?Gailm68577904 what version of Photoshop exactly are you trying to download? If you are wishing to evaluate Photoshop CC 2014 then please see Creative Cloud Help | Install, update, or uninstall apps for information on how to install.
If you are wishing to install Photoshop CS6 then the installation files can be found at Download CS6 products. If you have a registered serial number for Creative Suite 6 it will be available under your account at http://www.adobe.com/. You can find more details on how to locate your registered serial number at Find your serial number quickly. -
Already had an account had to have a new hard drive put in my lap top they wiped out my info I need to install the new download
but I keep getting an erroe message " unable to download itunes 64 setup exe. The connection to this server was reset". What do I do?This completely *****. iTunes lists none of my music, although the music is on my iPod. When I click on the sync button, it starts to sync -- for about 5 seconds -- and does nothing. So I had to manually import all of my music from my hard drive into iTunes, but it still won't sync. Same thing with videos and photos.
-
Can nowaday we can use playnsound or send message on find my iphone ? I use it before but now I can't find the bottom.. So i want to ask that did it still have or can use? If yes how to use ?
Yes. See http://help.apple.com/icloud/#mmfc0f19b5.
-
I am trying to use my I Tunes account with a new computer. Now we can't get the new music we bought to sync with the Nano. Any ideas?
Downloading past purchases
http://support.apple.com/kb/HT2519
Recovering iTunes library from your device.
https://discussions.apple.com/docs/DOC-3991 -
I had an iPhone 4S, I recently upgraded to a 5s and have been using it since early December. I kept my same Apple ID . I gave my 4s away, the person set up their own Apple ID for the 4s however now I can't use my Apple ID in my 5s. Any help please
There could be many causes. What happens when you try to use it. also try adding it again.
-
I'm in syria and they blocked me from using any VPN service please help without VPN i can't open the store help please ( using iphone 5 version 9.1.4 )
There is nothing that anyone here on a user forum can do to help you. If it is a local issue in Syria, then you need to take it up with your phone company or authorities there who have prevented you from using VPN.
Nobody here can help you. -
The latest update of my IPhone 3GS has failed, now i can't use the phone. Please help.
The latest update of my IPhone 3GS has failed, now i can't use the phone. I have tried to restore but i get a message saying 'Iphone could not be restored. An unknown error occured(6). I am running the latest version of itunes (10.4) Please help.
Place your iPhone in manual recovery mode or DFU mode.
1. Connect your iPhone
2. Open iTunes
3. Hold down the home and power button for 8 seconds. After 8 sec, let go of the power but still hold down the home button until iTunes recognize your phone in recovery mode -
I own CS 5 Design Premium. Reading the FAQs, it seems I am eligible to upgrade to CS 6 but I can't find the upgrade to purchase and download. I can't upgrade to CC because $49 per month is too much for me -- I don't use this product for work. The $29 offer seems reasonable but $49 is way too much. I don't need the majority of the programs included in CC, but subscribing to just three of them will cost way more. Really not sure what to do here :-(
Thanks Ned. I did find this page, however it isn't an upgrade. I have been purchasing Adobe products for years so that I could just pay the upgrade price for current products. With the current system, I would be paying much more than I would for an upgrade. For example, I have been using my version of CS for at least three years. The upgrade cost me $750 so that comes out to around $21 per month. I guess I have no options as far as upgrading except for paying for the overpriced CC. Oh well, time to start looking for alternatives. It was just so convenient to have the same programs at home that I use at work.
-
tried to upgrade my iPhone 3GS to a higher iOS but unfortunately it had reset factory setting... now i can't use my phone anymore... tried also to connect to iTunes as instructed but only appears: WE ARE SORRY, WE CANNOT CONTINUE YOUR ACTIVATION AT THIS TIME... WHAT SHOULD I DO? THANK YOU...
No, you do not need to nor should you jailbreak your iPhone.
If you jailbreak your iPhone, you void any remaining warranty and lose
all support from Apple including this forum.
4 possible causes to activation server unavailable message:
1] activation server is actually unavailable. Happens very rarely and
does not last long on those rare occasions. Solution is to try again.
2] your firewall/internet security software/antivirus are preventing connection
to the activation server. Solution is to temporarily turn off your firewall/internet
security software/antivirun until you have activated your iPhone.
3] your iPhone has been jailbroken or otherwise hacked/modified.
4] the computer you are using to activate the iPhone has been used to
jailbreak an iOS device.
For causes 3] & 4] you are on your own as Terms of Use for this forum prohibit
discussion of jailbroken/modified iOS devices. Google may provide some direction.
Be advised that jailbreaking/hacking your iPhone may prevent the iPhone from
being able to be activated.
Maybe you are looking for
-
One-to-many mapping and update the many part
Hello ! Here's my problem, I've got an object A having a vector of object B. The mapping in toplink is one-to-many with the back-references set in B. Insertion : no problem. Now i would like to change the Vector of B (inserting new B, updating existi
-
How do you set the alert time to default to a set amount of time in the calendar?
How do you set a default alert time in my calendar so I don't have to set it every time?
-
Restricting (Limiting) SQ01 access for a set of users
We are attempting to restrict a user so that they can run specific queries but not change them. We do not want to go into each query within a user group and lock the individual queries. We want to make this more global in that all users groups to wh
-
A method which prints out if a strings starts with a character or not
Below you can see what I have made : public class StringZerleger { public static void main(String args[]) throws Exception{ new StringZerleger().zerlegeString(); public void zerlegeString() String s3 = "_a b c d"; String [] temp = null; temp = s3.spl
-
Basically, it was a good deal when I couldn't afford Photoshop and Lightroom, but now paying $600/year (and rising I assume) for the rest of my life to Adobe doesn't sound very viable either. I love Adobe products but unfortunately I'll have to jump