Using MacOSX how to set up Plug-in 1.3 (I am desperate)

Good Day,
I think it is possible to set up and use (I downloaded it) j2re-1_3_1_03-linux-i386-rpm.bi on Mac OSX but I have no idea how to. Can someone direct me, PLEASE!
Struggling,
~arthur

No... you may think its possible, but it's not. MacOS X has its own version of JRE 1.3.1, why would you want the Linux version?
See this framework?
http://developer.apple.com/macosx/architecture/
Java is right up there with Cocoa, Carbon, and Classic in MacOS X. You can't just throw in the Linux JRE and expect it to work, Java is too deep in the system. It has to access all of the lower layers; Quartz, OpenGL, and Quicktime, and the Darwin layer under that. The Linux JRE can't do that.

Similar Messages

How to set WebLogic Plug-In Enabled through admi in weblogic server 9.2

Hi,
how to set WebLogic Plug-In Enabled parameter for cluster through admin console in weblogic server 9.2 ???
Actually i could able to find the option for individual servers. However i could not able to find the same for cluster??
is it through only by WLST ???
can any one please advice??
regards,
Praveen Kumar J

Well, I don't know what you call a "BEA Admin", but please note that everyone here is trying to help.
Some of them are not working for BEA but are deeply efficient.
Well, for your problem, I started a 9.2.2 domain, created a cluster and found the "WebLogic Plug-In Enabled" option ...
In your console, in the "Domain Structure" window, click myDomain \ Environment \ Clusters
Then in the main page, you've got "Settings for myCluster".
On the very first page, "Configuration > General" tab, you should have the folliowing attributes :
* Name
* Default Load-Algorithm
* Cluster Address
* Number of Servers In Cluster Address
Go at the bottom of the page and under the last link "Number of Servers In Cluster Address", you have a little "Advanced" link in blue. Click on it and it will expand another part of the page.
In that new part, you'll find new attributes and the one you're expecting.
This time, it should definitely help.

How to set up connection between S and C

I want to realize a chat between server and client.
on both side ,there is a textArea to get the information to send to the other.
I know the socket is must be used,but how to set up the data source(from textarea or textfield),and how to store the data?
can some one tell me how to do this?
thanq!

So what are you saying you dont know how to use the textarea and textfield?Cause it is ez to convert that code that dunedinhigh gave you from console to a gui like what you want I think.So here is a link that shows you how to use text component.You learn this then you can put 2 and 2 together.Also check out the java tut page.
http://java.sun.com/docs/books/tutorial/
http://java.sun.com/docs/books/tutorial/uiswing/components/simpletext.html
good luck

How To Set Up Airport Express To Use With iPad2 For My Needs ?

On the advice of several people in a audio forum, I just purchase an Apple Airport Express. I will be using it with my new iPad 2. What I need to accomplish is using my iPad2 to stream subscription based music from the internet to the Airport Express, and for the Airport Express to connect via toslink cable to the DAC in my audio system.
What I am not sure about is how to set up my Airport Express to accomplish this. I do have a wireless network in my home, but wish to keep the wireless connectivity between the Airport Express and the iPad2 separate from it.
I would greatly appreciate any assistance with this. Thanks.

Deggie, firstly, thank you for your attempt to help. I greatly appreciate it. I connected it via the ethernet cable to the router since when I reconfigured the Airport Express adding it to my existing wireless system, the iPad could not connect to anything until I unplugged the Airport Express. I set it up for an ethernet connection to my router based on that experience.
Either the Ipad does not seem able to send anything to the Airport Express, or the AEX is not passing anything on. I also tried streaming a song stored on the iPad 2 to the AEX with no result, so it is not an issue with the subscription channel.
I don't own a miniplug cable of any sort for further testing, but the toslink cable is brand new, and was literally taken out of its package and plugged in, so I feel it extremely unlikely it is the issue. I've also tested it in three inputs on the DAC, so it is definitely not an issue with it.
I have a question though. You said "when you start your subscription and go to Airplay, does the iPad see the AEX?" You may be on to something there. How do I "go to Airplay" I thought it was just automatic? Also, how do I "select it"? This may be the problem.

How to set-up my home intranet using 2 different ISP's ?

I have had so much trouble recently with my main (8 years now!) internet provider "ABC" (not the real name) Cable Modem here in Belgium that I made the decision to pay another bunch each month to have a second ISP for my home and home office. "XYZ" (also not the real name) will start on Monday 26 July. It is a DSL line, linked to my TV and fixed telephone. Great, except I'm not really sure how to set-up this 2nd ISP.
First, I want this 2nd ISP to (at least for now) be an emergency backup. So if ABC shuts down again (as it has done a lot recently, but no technician can come until 30 July- poor service there!) - I want to immediately be able to use the XYZ server.
OK the XYZ has a kinda built-in router in that the DSL Modem has built-in WiFi and also 2 cable to computer out ports. I believe I can first just configure the WiFi: Apparently I have to attach my MBP-13" via cable in order to change / add a security code; maybe change the name of the WiFi from its default "XYZ-WiFi" (not the real name) to something I want like SteveXYZ and then add a security protection code.
But how to configure my eMail using MAIL? And can I still keep getting my eMail from my main "[email protected]" (not the real address) even when connected via XYZ? And what about SENDING from ABC when connected via the server XYZ?
Also: I currently have my ABC Modem going to a 4-port D-Link DI604 Router. From there, one cable goes to my MacBook Pro-13"; one to the Apple LaserWriter 12/640PS (great printer- 13 years old and still super); one to my Canon MP640 and one upstairs to another router: D-Link DIR-635 wired and wireless. From there, one cable goes to my wife's eMac; and another is available for guests; another unused and then the WiFi for when I compute in the garden and of course for my iTouch.
So now let's say that on 28 July the ABC is down. Ideally I'd like to pull the cable from the ABC Modem that goes into the DI604 Router and plug-in a cable going to the XYZ DSL Modem and voilà have internet back via my backup XYZ. BUT can I print? Do I have to reboot the Router since it will have to reassign those 192.168.0.123 type numbers, won't it? (I believe those numbers are called the "IP Addresses").
Thanks for any comments or references here.
Best regards,
Steve Schulte
Wednesday 21 July 2010

In your Network Preferences you can set up more than one method of connecting - i.e., Airport, Ethernet, Dial-up (heaven forbid). If, for example, you place Ethernet at the top of the list, then Airport, your Mac will try to connect to Ethernet first. If it can't, it will fall back to Airport.
So if you can have Airport connected to one ISP and Ethernet connected to another, you will be able to pick one or the other by imply pulling the Ethernet cord. What you can't do is set up two Ethernet connections (or Airport connections) each with a different ISP (though if I read you aright this isn't what you want anyway).
Another method is to set up 'Locations'. You could set up one with Airport only, and one with Ethernet only, and switch between them using Apple Menu>Locations: this would save you physically pulling cables and is just as quick, it takes only a few seconds.
As to mail, it depends on your ISP. Some ISPs demand that you are connected directly to them to send mail, and possibly also to receive mail: some rely entirely on the password. In the latter case you can use the same settings in both locations or methods: in the former you can't get round that - if you're not connected you can't send/receive as relevant.

How to set swing to support using vrml/external/browser ?

When doing applets with AWT to call vrml/external/browser.getbrowser, it works. But if update to use swing instead of awt, applets always cannot say: java.lang.NoClassDefFoundError: vrml/external/Browser.
The html file containing this applet is converted by command : java HTMLConverter **.html .And also using java1.3.1plug-in.
But if removing java plug-in and add ---ARCHIVE="Swing.jar"---- into **.html source code without using java HTMLConverter. The applet works.
While, this way can let applet work, but thus, the applet cannot connect to mysql database.
So, anyone knows how to set up swing in applet when using converted **.html with javaplugin? ???
Thanks so much!!!!

Hi David,
Need more info:
Version of Crystal Reports are you using?
Visual Studio version?
Try with this:
The following C# code demonstrates the use of the ExportToStream method:
ReportDocument report = new ReportDocument();
report.Load("c:\\temp\\test.rpt");
ExportOptions options = new ExportOptions();
options.ExportFormatType = ExportFormatType.PortableDocFormat;
options.FormatOptions = new PdfRtfWordFormatOptions();
ExportRequestContext req = new ExportRequestContext();
req.ExportInfo = options;
Stream s = report.FormatEngine.ExportToStream(req);
Response.ClearHeaders();
Response.ClearContent();
Response.ContentType = "application/pdf";
s.Seek(0, SeekOrigin.Begin);
byte[] buffer = new byte[s.Length];
s.Read(buffer, 0, (int)s.Length);
Response.BinaryWrite(buffer);
Response.End();
Regards,
Shweta

New comer ask 2 simple questions:how to set the use of the right click of

New comer ask 2 simple questions:how to set the use of the right click of your mouse?
I don't know why when i click the right button of my mouse in logic, sometimes it's the same funcion as my left one, some times it's the same function that opens the tool menu....But in MacOSX,it's all okay.Just the weired thing in logic ,please help
2.is there any kind of filter in Score? I mean, in midi track I have a C1 note, and I don't want the C1 note shown in my score, I want every note show which are above C2, like a filter. I think this is helpful dealling with some keyswich things,how can we do that?

In Preferences -> Global -> Editing you can choose weather right click is assignable or opens the tools box.
Not to sure about the score dude

Once and for all: How to set up and use SSH

Yes, I know ssh has been discussed on and off, but never in its entirety; and yes, there are step by step instructions on the www, but at one point or another they skip a crucial instruction that would be necessary for unix-dummies (e.g. how to save and close the nano-editor in Terminal). So, please pardon my question:
There are several points I'd like to ask for ssh-connecting two macs on a local network:
1) In terminal-file-"connect to server" you can ask for an ssh connection to be set up. For this to work, do I need to create private and public keys first? If so, how? Please point me to a reliable and step-by-step instruction site.
There are some free ssh-utilities out there, but their documentation is just not helpful enough for a UNIX-dummy.
2) Apparently I managed to connect via ssh once (from the terminal, see point 1) to a local server (allowing remote connection set to ON at the server). But then, when I connected to that server from the client's finder and tried to get into my user account on that server it told me that no secure connection could be established. What's wrong here? Do I have to continue working from within the terminal to use this connection? That would be difficult for an average MacUser.
3) What is the security advantage of an SSH connection on a local wireless network (Airport Base Station) over WPA2, if at all?
4) And how to set up an ssh-connection over the internet cloud to safely build a remote control/desktop sharing connection, e.g., a friend's Mac when she has a problem?
Thanks for your consideration.

First I'm not sure what your goals are.
1) In terminal-file-"connect to server" you can ask for an ssh connection to be set up. For this to work, do I need to create private and public keys first?
If you have ssh keys, you can do this without passwords. If you have not exchanged keys with the remote system, you will be asked for the password of the user you are attempting to login as.
If so, how? Please point me to a reliable and step-by-step instruction site. There are some free ssh-utilities out there, but their documentation is just not helpful enough for a UNIX-dummy.
Log into the remote system. This could be via ssh.
On the remote system, run the following command to generate an ssh key for that remote system:
ssh-keygen -t rsa
Generating public/private rsa key pair.
Enter file in which to save the key (/Users/username/.ssh/id_rsa): <<take default>>
Created directory '/Users/username/.ssh'.
Enter passphrase (empty for no passphrase): <<enter nothing>>
Enter same passphrase again: <<enter nothing again>>
Your identification has been saved in /Users/username/.ssh/id_rsa.
Your public key has been saved in /Users/username/.ssh/id_rsa.pub.
The key fingerprint is:
aa:bb:cc:dd:ee:ff:gg:hh:ii:jj:kk:ll:mm:nn:oo:pp [email protected]
This will generate an ssh key for the remote system. This could be any system that support ssh, such as a Unix system, or another Mac.
Copy the id_rsa.pub file from the remote system to your Mac. When I say "your Mac" I mean the one that you want to make the ssh connection from. The id_rsa.pub is found in the remote system's ~username/.ssh/ directory.
Append the copied id_rsa.pub to your Mac's ~himbear/.ssh/authorized_keys2 file
cat id_rsa.pub >>~himbear/.ssh/authorized_keys2
Now when you ssh to that specific remote system, it will NOT ask for a password. The first time you ssh to any system, ssh will ask if the system is really the system you thing it is. But once you say "yes", it will not ask that question again.
Repeat for every remote system you wish to log into using an ssh key.
2) Apparently I managed to connect via ssh once (from the terminal, see point 1) to a local server (allowing remote connection set to ON at the server). But then, when I connected to that server from the client's finder and tried to get into my user account on that server it told me that no secure connection could be established. What's wrong here? Do I have to continue working from within the terminal to use this connection? That would be difficult for an average MacUser.
MacUser. A flash from the past, as in the MacUser magazine.
ssh is not used by default when you make connections. If you want an ssh connection, you have to establish it intentionally.
ssh can be used to pre-establish a tunnel (or tunnels) that other services can use. Once an ssh tunnel is establish, connections to local host's tunnel port will be connected to the specified remote port. For example:
ssh -L 5901:localhost:5900 [email protected]
will establish a tunnel that VNC can use. The VNC client would connect to localhost display 1 or port 5901.
ssh allows multiple -L tunnels to be specified on the ssh command line.
3) What is the security advantage of an SSH connection on a local wireless network (Airport Base Station) over WPA2, if at all?
Inside you home. Not much. Unless of course you do not trust the other members of your family. That is to say, others having your WPA2 password, and are thus on the inside, and can sniff you packets.
4) And how to set up an ssh-connection over the internet cloud to safely build a remote control/desktop sharing connection, e.g., a friend's Mac when she has a problem?
If you are using the Mac OS X Leopard built-in *Screen Sharing* and you are connecting to another Mac's built-in Leopard System Preferences -> Sharing -> Remote Management (Tiger's Apple Remote Desktop), then in the *Screen Sharing* preferences, is an "Encrypt all network data" option.
If you wish to set this option in advance, you can launch *Screen Sharing* by double clicking on System -> Library -> CoreServices -> Screen Sharing.app
You can *Screen Sharing* connections over the net using iChat. This is one of the easiest ways to take control of their system. Of course they need to cooperate. I use a Free AOL Instant Messager (AIM) account for my iChat connections. And as a side benefit you can text, audio chat and/or video chat with the person at the other end.
If you are NOT using the build-in Mac OS X *Screen Sharing* and/or you are NOT using the build-in remote Mac OS X remote management server, then this is a situation where an ssh tunnel would be a very good idea.
However, setting up an ssh tunnel between 2 systems across the internet gets complex.
In this case you might want to consider using something like LogMeIn.com which will deal with all those nasty home routers without needing to to do nasty router configurations, and it will be a secure connection. LogMeIn.com will not be as fast as a *Screen Sharing* connection or a VNC connection, but it will be secure and easy to establish. Again, this is only if you can not to Mac to Mac *Screen Sharing* using built-in Mac OS X remote desktop.
Now if you want to roll your own ssh tunnels for VNC, then I'm just going to outline the things you need to do.
If the remote system is behind a home router, you need to configure that remote home router to "Port Forward" port 22 on the Internet side to port 22 on the target Mac. Bonus points if the internet side using a high number port to discourge net bots from knocking on your door. Use the ssh -p 12345 option to connect to the high numbered port that is forwarded to port 22 of the destination Mac.
On the remote Mac you need to run a VNC server. If this is a Mac, then Leopard System Preferences -> Sharing -> Remote Management (Tiger's Apple Remote Desktop). If it is not a Mac, then for Windows, TightVNC, UltraVNC, RealVNC are possible options. Linux has a built-in vncserver, or you can install x11vnc which has the advantage of displaying the desktop screen.
Once you can access the remote system, you use an ssh command like the following:
ssh -p 12345 -L 5901:localhost:5900 remote.system.address
You can get the remote system's address by having the remote system surf over to http://whatismyip.com. Then they can tell you the IP address.
If you are going to be doing this a lot, you can get a free no-ip.com or dyndns.org dynamic DNS name for the remote system, and the remote system can run a dynamic DNS client (available from no-ip.com or dyndns.org) which will keep the dynamic DNS name updated as the remote person's ISP change's their IP address.
Finally, now that you have an ssh tunnel for VNC traffic, you have your VNC client connect to
Address: localhost
Port: 5901
Depending on your VNC client you may need to specify Display 1 instead of Port 5901. Or if you do not get a Display or Port option you specify localhost:5901

How to set up roaming profile on Macs using AD like in windows

I can bind the workstations to the domain fine.. But can someone direct me to instructions of how to set up the roaming profiles ?
What steps do I need on the server ? This is what I've done so far.
I already have OU's for the departments and the users have a shared folder inside their department folder.... \\server\shared_folder\user
I have done the usual things with AD as far as the profile settings on the windows server.
Am currently running Mac OS 10.5 and above
My windows AD runs on windows server 2008
All my windows workstation are able to use roaming profile without a problem.
So far i have tried the so many avenues including..
Make sure the Mac systems are joined to the domain controller and an ADS user can log on successfully. Use "Directory Utility" under "Utilities" menu to join the system to the domain.
Backup all the contents from /Users to the storage or somewhere locally.
Configure automount - Go to "Utilities" -> "Directory Utility" - Select the domain and click "Show advanced options" - Click "Mounts" tab and add automount as mentioned below. Remote NFS URL: nfs://server_name/share_name/path/to/profile/directory Mount location: /Users Additional mount parameters: -P,-T Apply the settings and this will mount the remote shared folder or we can name it as Roaming Profile Space - under /Users directory
Enable roaming profile - Go to "Utilities" -> "Directory Utility" - Select the domain and click "Show advanced options" - Click "Services" -> Select "Active Directory" and click "Show advanced option" - Click "User experience" tab and select the option "Create mobile account at login".
Reboot the system and log in as any ADS user. The Roaming shared folder will be mounted and the user profile will be created on the shared folder
Can anyone kindly assist me

Hi Guys, anyone with the Soln...or Tips..Am waiting

How to set up set which NIC card to use for multicast?..

 I just downloaded Rolling Patch 1 for WLS6.0SP2.
 While reading the README file it says
 " ISSUE 42518: Provided a way to set which NIC card to use for multicast traffic
 Can anyone tell me how to set this?. on my WebApplication server it has two NIC
 cards and I want to use the NICcard which is being used to talk to internal network
 for multicast messages.
 One more thing,
 Can anyone one tell how to search for bugs (ISSUES) in weblogic. I am looking
 place where I enter ISSUE number and should get the detailed description of bug/issue
 etc..
 Thanks for helping,
 Nilesh


 Thanks Kumar, I'll try this.
 Does this -Dweblogic.interfaceAddress used only for multicast. Or this is also
 used to talk to AdminServer?.
 The other problem I am facing is when I restart the AdminServer in recovery mode
 it's not finding my WebApp servers, because my webapp servers are on public network
 and my admin (management) server is on private network.
 please look at http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=article&group=weblogic.developer.interest.management&item=1217&utag=
 , for more details about my problem.
 Thanks,
 Nilesh
 Kumar Allamraju <[email protected]> wrote:
 ><!doctype html public "-//w3c//dtd html 4.0 transitional//en">
 ><html>
 >You should be able to do it via console in 6.1
 > Not sure if it was added in 6.0
 >For 6.0 you can set this via command line
 > java -Dweblogic.interfaceAddress=<addr>
 >You need 6.0 SP2 RP1
 >--
 > Kumar
 >Nilesh Shah wrote:
 ><blockquote TYPE=CITE>I just downloaded Rolling Patch 1 for WLS6.0SP2.
 > While reading the README file it says
 > " ISSUE 42518: Provided a way to set which NIC card to use for multicast
 >traffic
 > "..
 >Can anyone tell me how to set this?. on my WebApplication server it
 >has two NIC
 > cards and I want to use the NICcard which is being used to talk to
 >internal network
 > for multicast messages.
 >One more thing,
 >Can anyone one tell how to search for bugs (ISSUES) in weblogic. I
 >am
 >looking
 > place where I enter ISSUE number and should get the detailed description
 >of bug/issue
 > etc..
 >Thanks for helping,
 >Nilesh</blockquote>
 ></html>
 >

How to set-up and use FAMILY Sharing

Can someone please explain to me in detail how to set-up and use FAMILY Sharing, none of the information I have so far found in the documentation helps at all, in fact it puts you in a constant loop giving the same information over and over again
We have quite a few devices from ipads, iphones and ipods and I need to set-up Family Sharing.
We have our main Apple ID which is linked to our Payment method, I have now got my son a new iPad, I have created his Apple ID and set-up a link via FAMILY Sharing to our main Apple ID.
From what I read we should be able to share our purchased Apps between family members.
So I figured I would be able to get the Apps now via iTunes that are part of the FAMILY Sharing, however when I go into ITunes (latest version downloaded yesterday) I can only see the Home sharing menu item not FAMILY Sharing, so I cannot work out in Itunes how to get Apps that are FAMILY shared. So ok I will try and get Apps directly via the Ipad using the App Store. To test it is working I look for a known paid for App, I then go to download it and it is now asking me to pay for it again.
Can someone please explain to me in detail how FAMILY Sharing is supposed to work and how I get it to work please.
Thanks for your help
Greg

Hey GregWr,
Thanks for the question. The following resources provides some of the best information regarding Family Sharing. Included, you’ll find information on making sure the accounts are set to "Share my purchases”, as well as information on downloading Family Member purchases from the iTunes Purchased section. Please note that some applications are not shareable.
Sharing purchased content with Family Sharing - Apple Support
http://support.apple.com/en-us/HT201085
Which purchased content can I share using Family Sharing - Apple Support
http://support.apple.com/en-us/HT203046
If you don't see your family's shared content - Apple Support
http://support.apple.com/en-us/HT201454
Thanks,
Matt M.

How to Set Up SSO Between IBM WebSphere and SAP EP Using JAAS

Hi
I have read the article on SDN called "How to Set Up SSO Between IBM WebSphere and SAP EP Using JAAS", which is also the name of my posting.
The reason why I post this is that I've tried to follow the links in the PDF to get the file WebsphereEpSsoLib.zip but I get an error 403, which tells me that the file is not there.
Does anybody know where this file went or can somebody tell me an alternative place to get this file?
Jacob

Please open the associated whitepaper, and you can find the download link to the .ZIP file on page 4.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/ibm/how to set up single sign-on between an ibm websphere portal and the sap enterprise portal using jaas.pdf
Hope that works!
Elise

How to set up shared use of "Contacts" data w/ 2 individual user accounts?

How to set up shared use of application "Contacts" data for two individual user accounts?

Link the contacts in one user account to a online cloud based system like Google or apples iCloud and then link the second user to that same online account. This could cause some slight problems if both people maintain their own online account to either of those systems on a phone or pad.

How to set up use of relative URLs for a BSP application

Dear all,
I need to access a BSP application through our external portal.
This is failing because generated URLs are absolute URLs (they mention physical server name, not known of course on the internet) where they should be relative URLs (they use external portal URL as prefix).
How to set this up?
I'm logged on http://myportal.com/irj/portal and want to call a BSP application. To build this page, my internet client (Internet Explorer) tries to get elements from the server. Looking at HTTP trace, I can see that my IE is trying to reach the physical server, not known on internet of course, then page loading fails.
Ex absolute URL : http://myservername.domain.com/sap/bw/[...]/image1.gif
This is the behavior I can see at the moment.
Relative URL : http://myportal.com/sap/bw/[...]/image1.gif
This is what I'd like to see.
Many thanks in advance for your help.
François

Any idea ?

How do I set a different folder than the Windows MyDocuments/Downloads folder? I do not use 'My Documents' at all, all my saved files go to other hard drives for storage, and I do not want to bother with the My Docs route. I used to have downloads set to

I want to set a different folder from the My Documents/Downloads folder for Firefox to put everything I download, like I used to have it. I recently rebuilt my computer and reinstalled everything from WinXP to security software to Firefox, and I cannot find any options anywhere to set a different folder like I used to have it... with the same software, other than it being a newer iteration of Ff. So tell me, am I losing my mind so bad that I just can't remember how I did it before, or have things changed so much that what I want is no longer possible? Please, someone tell me how to set it to do what I want, I can't stand to have what I do on my computer dictated by programmers who only think that they know what people want. If that sounds a little angry, I apologize with the disclaimer that I suffer from Post Traumatic Stress Disorder and therefore cannot handle frustration... and this kind of thing frustrates me to the point of rage.

Tools > Options - General tab = Downloads
Set your preferences there.

Using MacOSX how to set up Plug-in 1.3 (I am desperate)

Similar Messages

Maybe you are looking for