Using map file from Mercator in ECXpert

Hi all,
I am using the Mercator map file in the Mercator example (<Mercator install dir>\Examples\XML\XML2EDI\ XML2EDI.mms) and convert the map file to Solaris platform map file (XML2EDI.sun) using Mercator Map Designer.
After that the .sun map file is used in ECXpert. The input file is poin.xml. The transaction is not succesful and error occurs as the require stylesheet base directory not found.
The stylesheet directory can be set in the /<install dir>/NS-apps/ECXpert/data/stylesheet/ecxstylesheet.xml, but the problem is for this map file (.sun), the stylesheet is not used.
Question:
1.Does map file (.sun) need a stylesheet?
2.Does this stylesheet need to be created?
3.What are the requirements to use the .sun map file (that is converted from.mms for xml input file)?
Do appreciate your response. Thanks.
Regards,
Mei Ling

Mei Ling,
See inline for comments...
Regards,
Saket
Hi Saket,
Thanks for ur reply.
I have change the partnership type to normal type
(Application to Apllication), but still having the
same problem which it always looking for a
stylesheet.
Seems like i am using the ECXpert XML capabilities as
well even though i have change to Application to
Application in the partnership.You probably need to describe what you are doing in greater detail here. Looks like a configuration issue to me. Also, what version of ECX are you using? And what is the version of the Mercator Design Studio (including the patch number/build number)?
If you can provide me with more details of the steps you are doing to set this up, I may be able to help you better.
>
Question:
How do i use Mercator in ECXpert? Is this the right
way by simply convert a Mercator map file to (.sun)
and put it into the map file path of ECXpert and
creating partnership and services for it?That is correct. Don't see anything obviously wrong here. You have to watch out for the version of your Design Studio and the Mercator runtime though. Have you opened a case with Sun Tech Support for this? If not, I suggest you do so.
>
Appreaciate for ur response.
Regards,
Mei Ling

Similar Messages

  • How to use .mod files from a JVC camcorder?

    Hi All,
    I'm trying to find the proper workflow for using .mod files from a JVC Everio model camcorder. I was able to transfer the files onto my system by simply using the included usb cable from the unit. It simply mounted the camera's flash card on my desktop and I was able to drag all of the files from it.
    As others have posted, the .mod files are not accessible using the Import function in FCP. I am able to open them with MPEGStreamClip as other have suggested. My question is, how should the files be converted to use with FCP and/or DVDSP? In MPEGStreamclip the file shows the video stream as: 224 MPEG-2, 720 × 480, 16:9, 29.97 fps, 8.40 Mbps, upper field first. I tried a few of the demux functions. The straight demux to .m2v & .ac3 yields a file that opens in QT, but it shows up as a 640x480 file and is noticably squeezed. Using the demux unscaled yields a file that opens in QT as a 720x480 file and looks somewhat better. And using the demux to headed yields as file that opens in QT as 720x404 and presumably is the correct 16:9 ratio.
    Trying to use those same files in DVDSP didn't get me very far. If I create a new HD project in DVDSP I can import the straight demuxed file and the headed file. The unscaled file won't import. If I add the imported files to tracks the straight demuxed one will play in the simulator but the headed one simply shows a green screen.
    I'm hoping that since MPEGStreamclip can play the files, its just a question of figuring out the proper export/conversion settings. My end goal is to produce a dvd of the footage (not exactly sure if I should be using an HD project or a SD project set to letterbox). I also need to produce a web-ready version of the footage. I haven't tried this yet but I'm assuming that one of the QT exports from MPEGStreamclip will get this done correctly.
    Hopefully someone has a workable solution for these files.
    Thanks,
    Chris

    Hi all,
    I looked further on this forum and found others that had the same problem. One suggested connecting the cam corder first, then start iMovie, then wait for a few minutes. I did this and it worked!!!!!
    Problem solved.
    Thanks.

  • Settings when using mp4 files from Samsung GS3

    Hi,
    Does anyone know the settings I should select when creating a New PE10 Project and using mp4 files from a Samsung Galaxy S3 mobile phone?
    Thanks

    Ms Spielberg
    If you are using video files from the Samsung Galaxy S3, from what I have read, it offers 1080p up to 30, that being 1920 x 1080 @ 30 progressive frames per second. Is that correct? If so, please consider.
    The project preset should match the properties of your source media. In setting the Premiere Elements 10 Windows project preset (new project dialog), the choice of one of the FIip project presets range from frames sizes 640 x 480 to 1280 x 720. So, they would not be a match.
    Consequently, I would ask you to consider the project preset if your source media from this Samsung Galaxy S3 are as I have read 1080p30.
    NTSC (or PAL as the case may be)
    DSLR
    1080p
    DSLR 1080p30 or DSLR 1080p30 @ 29.97
    In Premiere Elements 10 after you set the project preset, then you import your media with Get Media.
    a. If you can connect your phone to the computer, you could explore Get Media/Flip/AVCHD/Cameras, Phones or Removable Drive as I think SG is suggesting.
    or
    b. If your phone files are saved to a hard drive location, then Get Media/Files and Folders.
    Are you also asking for export suggestions?
    Thanks.
    ATR

  • Can I use mp3 files from different domain as the feed?

    Hi..
    I have just created a new podcast here:
    http://artistsofliving.com/?feed=podcast
    I would like to submit the podcast to iTunes sometime soon...
    However, I'm wondering if they will reject it because the feed lives on 'artistsofliving.com', whereas I keep the media mp3 files on 'livinginthepresent.com'... a different domain.
    I own the mp3 content and both domains- I'm splitting the media from the website for bandwidth reasons.
    Is this ok? If this causes a rejection straight out is there a way to indicate that I own the material fairly?
    Thanks!
    -rich

    There's no problem about using media files from any source: the feed just has to reference them (the URLs have to be 'absolute' - i.e. including the http:// and the server name - even if the file is on the same server as the feed anyway). I don't see the fact that some files have different URLs leading to accusations of copyright breach.

  • Call ggsci using batch file from windows- get error

    i create a script to use ggsci, start manager, extract and replicat.
    i have success doing this in my linux.
    here is one of my script : start_ext1.sh
    cd /u01/app/oracle/ggs
    ./ggsci <<EOF
    start manager
    start ext_s
    exit
    EOF
    clear
    i have an error when i do this using batch file from windows.
    here is the batch file :
    @echo off
    cd C:\putty
    plink.exe -ssh -2 -P 22 [email protected] -pw oracle "./start_ext1.sh"
    every time i try to enter ggsci when i run that batch file, i get this error :
    ./ggsci: error while loading shared libraries: libnnz10.so: cannot open shared object file: No such file or directory
    i didn't get this error when i run the script in linux.
    is there anybody can help me?
    thanks a lot!

    problem solved!
    add : . ./.bash_profile before enter ggsci.
    it's worked! :)

  • Using Map Files / Map IDs

    Heya,
    RH9, merged webhelp
    I'm trying to set up Map IDs for a quasi-context sensitive help feature, and I'm feeling a bit overwhelmed. I've read through the RH9 help which links to the Grainge website and a couple more links, but I'm still not sure what to do.
    First, the background:
    We auto-generate a set of release notes for new features and fixes. This is done using a script that pulls the relevant information out of Dovetail (basically where all our support and development cases are stored). So basically our release list shows the case number, the area of the software, and a brief summary of the fix/feature. The release notes are script-generated as an .html file that we can link to in help.
    The issue is that they want me to alter the release notes so that the case number serves as a hyperlink to the relevant topic in help. So, for example, if we had a new feature for widget making, case number 12345, the release notes entry for this would have a hyperlink that would take the user to the 'Widget Making' help topic.
    My thinking is that I can use the case numbers as Map IDs, ie assign Map ID '12345' to the 'Widget Making' topic, and then create a generic link in the release notes that can 'insert' the relevant case number when the user goes to find that associated help topic.
    Potential Issue:
    We use a merged help system, but we do not need to merge map files. Our help system consists of one mostly-empty parent project (title page, about page, etc.), a project that contains the majority of our topics, a project that contains database information for technical users, and a few other odd projects. All of the linked topics are going to be in the same main child help project. Because of this, the map file/IDs are going to be a single set in a single project, but not the parent project.
    Does this only affect the pathway for the basic link (e.g. "webhelp/mergedProjects/child1.htm" instead of "webhelp/start.htm"?), or are there other considerations? For example, the merged help map ID topics I've seen talk about using number ranges to denote the different projects, but since we've only the one, do we really need to do that? To me, it seems like we should be able to use a relatively straight-forward single-project type link, with the only difference being that the the link goes to a child project folder and not the main webhelp folder.
    So far in testing, the link doesn't work, so I'm wondering if either the URL is not as straight-forward as I hoped, or I'm missing something else due to the nature of how our webhelp is set up. Because it's a child, do we still need to 'merge' map files even if we don't need one for the parent? (ie we create an empty parent map file, merge it with the child, and link to the parent?)
    Thanks for any tips/advice!

    Hi,
    When you use CSH in a merged project, the master project will automatically check all child projects when the context sensitive id cannot be found in the master project.  Peter’s method includes merging the map files but I don’t think that is necessary. We have several merged projects that work perfectly without merging the map files. But Peter is the authority on merged help
    It is important to first get the terminology straight. In WebHelp there are Map ID’s and Map numbers. The Map ID (or topic id) is an alphanumeric string that can be anything from one character to a hundred or more characters. Then there are the Map numbers. Map numbers are a number between 1 and 4.294.967.295.
    The terminology is important because what RoboHelp calls a Map ID may be referred to as a map number. Reading the article on Peter’s site I get the impression that what is called a Map ID on Peter’s site is actually the Map number in RoboHelp. (Please correct me if I’m wrong Peter.) The Map ID in RoboHelp is the Topic ID on Peter’s site. See step 8 of the article, it describes how to create a test page using the default RoboHelp JavaScript API. But that test page actually uses the map numbers as the default JS API does not support topic id’s, only map numbers.
    Your map file tells the following:
    ‘12345’ is the Map ID or topic ID.
    ‘1’ is the Map number. The Map ID referred to on Peter’s site if I’m not mistaken.
    Calling the Map number 12345 will not work if you use the default method because you are looking for the wrong number. Try the following:
    Say that your master project is placed on http://localhost/newproject.htm. Open a new browser window and add the following URL in the browser where you replace the url with the url your project is placed:
    http://localhost/newproject.htm#<str=12345
    Does this get the desired result? Also try the test page but use ‘1’ instead of ‘12345’. Does this also get the correct page?
    You (or your developers) may also be interested in my WebHelp CSH dissection: http://www.wvanweelden.eu/robohelp/webhelp/csh Note that this article is aimed at developers and does not provide any direct answers, but it will help you understand the different settings in RoboHelp.
    Hope this doesn’t confuse you and I hope my assumptions about your intended action are correct.
    Greet,
    Willam

  • Re-Using XML file from decode barcode + extract xml process

    I was hoping someone could put me in the right direction here. I am decodeing the information stored in a 2D Bar code and sending this information to an XML file, then I am trying to combine that xml file with a blank PDF template but the process is failing beacuse there are some additional tag fields the XML data from the  Decode->Extract XML process.
    The XML file from the decode process gives the structure below..notice therer some extra tags (lines 2- 4)
    <?xml version="1.0" encoding="UTF-8"?>
    <xdp:xdp xmlns:xdp="http://ns.adobe.com/xdp/" xmlns:xfa="http://www.xfa.org/schema/xfa-data/1.0/">
    <xfa:datasets>
    <xfa:data>
    <form1>
    The XML structure that is expected by the PDF template is as follows
    <?xml version="1.0" encoding="UTF-8"?>
    <form1>
    So the xml output of the Decode barcode + Extract XML process has three extra lines of tag. Is there a way I could use a process within liveCycle to clean out those three lines in real-time before sending the xml to be recombined with the PDF template.
    Thanks

    Hi,
    What you may do is to use the SetValue and its xpath builder functions to "serialize" the xml into string, "substring" to remove the extra tags, and "concat" to add the extra tags and then "deserialize" it again to an xml to be merged with your form.
    Greetings,
    Yasser

  • Best workflow using DNG files from Odyssey 7Q in Premiere 8.1

    Finally, the magenta highlights issue has been fixed in this new 8.1 version of Premiere - lovely! :-)
    I'm wondering though, what the best workflow is when using 2K/4K raw dng image sequences from the Odyssey7Q? In this case, shot on the Sony FS700.
    Is there a simple and easy way to batch import a bunch of clips?
    The behavior of the Media Browser in Premiere is a little different than the last version... When you choose the individual dng clip folders it now shows one single dng sequence files instead of a bunch of individual png images. But you still have to browse to each clip folder and choose the dng sequence file. If you just choose the root that contains the clip folders or if you choose multiple clip folders, it will import the content of those folders as individual dng image files! Pretty annoying...
    Does anyone know of a better way to import where you don't have to choose each clip manually?
    Also, how do you bring a PP edit sequence into AE for ACR processing? You can't copy/paste the files and you can't choose "Replace With After Effects Composition" - those two methods will just import one single DNG frame into AE.
    You can import a whole PP project into AE but that will just show the entire PP sequence as one single file. You can't access the individual clips or open it in ACR.
    The best method I know of is export all the DNG sequences as proxies, edit the material using the proxies on PP timeline, copy/paste that into an AE comp and then manually replace each of the used proxy files with the original DNG files, which will open up the ACR. But that's a bit of a hassle...
    Is there any way of taking advantage of the full dynamic range of the DNG files in Premiere? When I bring down and overexposed image using either fast color correction or by right-clicking on a clip and choosing "source settings..." and using the exposure slider, the image looks "flat" but when I do the same thing using the ACR, I can reintroduce the details otherwise lost in the overexposure.
    Any info or advice on this will be greatly appreciated

    Hi EyelightKasper,
    See if this method will work for you: Re: How to import multiple DNG files into Premiere
    Thanks!
    Kevin

  • Using music files from DVD

    Hey everyone, I was wondering how I would be able to "rip" the music files from a Dvd. I own the Korn Greatest Hits which includes a bonus DVD of their live concert at CBGB's. I absolutely love it, but I do not know how to take the audio files off of it. Is there a way to do this? Thank you for your help.

    The best approach for this would probably be to import the dvd into your computer as an mpeg 4 or something similar, then use specialized software to extract the sound from it. Check out hand break for the dvd ripping, and look on versiontracker.com for something which maybe able to extract the audio. If this doesnt work, then im out of easy ideas...
    ~Ryan

  • Calling report using Mapping File with user parameters

    Please provide an example of Key mapping file that provides user parameters to an Oracle Reports report, where paramform=no.
    I call an Oracle Reports report via APEX, and can't get the URL to work. If I don't use the mapping file, the call works. But I can't seem to get it to work using the mapping file to hide all the other params like userid etc.

    Please provide an example of Key mapping file that provides user parameters to an Oracle Reports report, where paramform=no.
    I call an Oracle Reports report via APEX, and can't get the URL to work. If I don't use the mapping file, the call works. But I can't seem to get it to work using the mapping file to hide all the other params like userid etc.

  • Is it possible to use a file from CS6 in CS5.5

    I'm hoping to buy CS6 but I use CS5.5 at college. Is it possible to bring a file from CS6 into CS5.5. If not, where can I get CS5.5?

    PS files are backward compatible if you save them with maximum compatibility enabled. likewise, AI files can be saved back to older versions. Of course in both cases specific features from CS6 will be lost or rasterized to pixels, so they are not editable in CS5.5. In Design might be a bit more tricky. It supports saving back to CS5.5, but this may completely ruin your documents, if you use the new dynamic layout features, Arabic text etc., so it's less useful to go that route.
    Mylenium

  • How do I use MPL file from Panasonic camcorder in iMove?

    My file type from my Panasonic HDC-SD9 doesn't show up when I open iMOVE. Doesn't iMOVE support MPL files from Panasonic?

    I'm guessing your files were MTS or something else, as I've never heard of an MPL file. You should ask your question over in the iMovie forum as this one deals specifically with Final Cut Express.
    Edit: As I recall we were discussing using your camcorder in FCE over here:
    http://discussions.apple.com/thread.jspa?threadID=2344423&tstart=0
    Message was edited by: skalicki`

  • Using preview files from Pr 5.5

    I use the Suite 5.5 and this question is about Encore when using the Dynamic link from Premier Pro (Pr).  I have always used the automated way to import from Pr to Encore.  It automatically compresses as needed to fill the DVD.  And because my video is almost always under 2 hours that works great.  Even for videos that are over 2 hours long.  Now here is the problem:
    Sometime I use several effects in [Pr] and render so I can better see what I am doing without all that skipping.
    I would like to use the render files (previews) for making the DVD in Encore when transcoding.
    Yes, I understand you go to Edit Quality Presets and at the bottom you checkmark the [Use Previews] box.  But now it is nolonger automatically compressing the file to fit the DVD, or I don't it so.
    So the question is:
    How can I use the preview files (rendered files) from [Pr] to speed up the transcoding in Encore and automatically size fit the Video to fill the DVD.
    Thank you,
    Tom

    I don't think you can get both aspects - automatic or use previews.
    The settings for a dynamic link transcode are in Encore. When a preset is selected, "use previews" is not selected by default, but can be selected by customizing the preset. But you have no control over the settings used for the automatic setting, beyond the default transcode setting, which for DVD is basically the max bitrate.
    A "bit" of bitrate calculation and you'll still be good to go.

  • HT4889 How can I use all files from every user on my mac?

    Is there a way I can share all of the files on my computer to where every user on one computer can access files from one user to another? All help is appreicated!

    That is so contrary to the way of OS X that I seriously doubt it.
    I would suggest that you just create a single user account and let everyone log into that single account.
    Allan

  • Configure Multiple App Servers to Use Same Files from Network Share?

    Application Server v10.1.2
    We're currently running Oracle Forms and Reports for a legacy application. It is served up by 8 app servers who pull the files from a single file server. We are beginning to transition pieces of this application to Java; how would we configure the OC4J instances on all 8 machines to pull the Java files from the single file server? In my experience I've always just logged into each app server, gone into the OC4J instance, pointed it to my ear file and let it install(course, I only had to manage one or two servers, never 8). That doesn't seem like that would work in this distributed configuration.
    Any suggestions?

    You can cluster your Application Servers, and then deploy your EAR to the cluster insted of deploying the EAR on a single OC4J.
    Bye,
    Andrea

Maybe you are looking for