USING MULTIPLE CONTROLLING AREA in the column

Dear Experts,
As per my requirement i need fetch the data from multiple controlling areas in to one report. please let us know how many ways are there? can i able to use controlling are in the column of the report. when i try to select the controlling area is not appearing in the coumn and it is appearing only in the gene

Hi,
You can select multiple Controlling area Please try with following steps.
Maintain variant
Click on attributes.
Environment > Maint.sel.varables.
Click on Display/Change.
Create new Parameter.
Maintain selection options to new parameter.
Save and back.
Select "T" in selection variable against Field name :Controlling Area.
Select the selection variable(Newly created Parameter)
Regards
Mahesh

Similar Messages

  • Same Cost Element in multiple Controlling Areas

    Can a same Cost Element under the Chart Of Accounts(CSKA) used in multiple controlling areas under the Chart Of Accounts or it should be used only by one Controlling Area. Then as Cost Element category is under CSKB (Cost elements (data dependent on controlling area)) it depends on Cost element and  controlling area. So can a Cost elemtnt in different controlling areas has different cost element category. Is that possible as in that case COst ELement becomes GL Account in one Controlling area and doesnt have GL Acvcount in another.

    Yes.  Provided it's the same chart of accounts being used across all of the controlling areas.  In the case of primary cost elements, you will still need to individually create the equivalent G/L accounts in every applicable company though.

  • COPA Assessment Cycle using KEU5 for multiple controlling areas

    Hello All,
    There is an organization with operations in several countries. There is a separate controlling area for each country. There is one controlling area, for instance, for Germany and another for Netherlands.
    A problem is encountered while executing transaction KEU5 for multiple controlling areas in parallel. For instance, when one user from Germany executes KEU5 for an assessment cycle for Germany controlling area and at the same time another user from Netherlands tries to execute KEU5 for a cycle for NL controlling area, the user from Netherlands encounters an error message u201C'Cycle XXXX 01.02.2008 cannot be started because run group 0000 is locked'.
    Apparently SAP allows assessment cycles for exactly one controlling area to be executed together. This poses a problem since the organization plans to implement SAP in several other countries (There will be one separate controlling area for each country as per the organization structure adopted by the company).
    Any ideas, views or suggestions on the aforesaid issue would be highly appreciated.
    Regards,
    Soumya

    Hi Soumya,
    Did you find any text in SAP Documentation saying that "SAP does not allow cycles belonging to different controlling areas to be executed at the same time"...?
    Pls find the following text from SAP Help...
    Parallel Processing of Cycles of an Allocation Type
    Use
    Parallel processing of cycles results in considerable time savings. To process cycles of one allocation type in parallel, they must be assigned to different cycle run groups.
    You define the cycle run groups in the cycle header data. You also assign cycles to the cycle run groups in the header data.
    To process the cycles of a cycle run group in parallel, start the cycles one after the other, if required, in different sessions.
    You are carrying out a cross-company code cost accounting and want to perform the actual assessment in the individual company codes in parallel. Create a cycle run group for each company code and assign the appropriate cycles to these groups. You can then carry out the actual assessment in the individual company codes in parallel.
    When you execute a cycle, you can start a consistency check. The system checks whether you are allowed to execute the selected cycles in parallel.
    Though I didn't come across such requirement, I feel, my earlier suggestion will work out...
    Srikanth Munnaluri

  • Same operating concern for multiple controlling area

    Dear all,
    We have a senario in which multiple controlling area is defined with multiple currency. Is it feasible to use same operating concern or different.
    Thanks & Regards,
    Vishal

    Hi
    As long as the Fiscal Yr Variant is same between the two, you can use same Op Concern
    I dont think the above reply is valid because in my opinion, there is no restriction with regards to Currency
    br, Ajay M

  • Multiple Controlling Areas

    I have a client with multiple controlling areas in ECC 4.6c.  We are preparing them to upgrade to ECC 6.0 then migrate to the new G/L.  The questions is:  When is it "easier" to convert to a single controlling area, before or after the ECC 6.0 Upgrade?  Before or as part of the New G/L Migration?
    They may not upgrade until very late this year or early next year.  They want to improve consolidated reporting as quickly as possible but are wary of the amount of time needed to eliminate the multiple controlling areas.

    Have you thought about re-implementing???
    Migrating Company Codes from different controlling areas can be a complicated process. You may need to create new Company Codes and link them all to the new controlling area.
    This will be a massive job - even if you dont want history.
    Think of the master data - Customers, Vendors, Assets, Materials etc.
    If you are to do anything you should get your rg Structure defined - i.e. one Controlling Area and then go for the new gl document splitting program.
    The two pieces of work are Fiscal Year dependant, the next FY you would need to move to a single Controlling Area, and then the following move to document splitting.
    You could do the Controlling Area and Upgrade (re-implementation) in one project and then do the document splitting the next Fiscal Year.
    Either way - good luck, sounds like you are going to be very busy !!!

  • Multiple controlling area with same chart account

    Hi Experts,
    can we consolidate multiple controlling area with same chart account in SAP BI?
    for example, if in R3 I have 4 Controlling Areas with the same chart of accounts, I can get an standard BW reports summarizing  them.

    Hi
    Chart of accounts i.e. 0CHRT_ACCTS is an attribute of Controlling area. This means each Controlling area will have it's own chart of accounts. This chart of accounts could be similar in terms of content values. So it is possible to consolidate and produce a report which provides a summary of the chart of accounts.
    Cheers
    Umesh

  • Can you use multiple email addresses on the owa app?

    Can you use multiple email addresses on the Microsoft OWA App?

    You can do it but there is a delay from the bluetooth speaker.  You'll need an iphone or ipad using the Apple app "Control", airplay setup, bluetooth speaker, and an Apple laptop or desktop. 
    I used my laptop to connect to my bluetooth speaker so that sound streams to my bluetooth device. Then, on my iphone I opened Control and connect the music to my airplay and my laptop at the same time.  The music goes to your airplay speaker, and then to my laptop which then blue tooths it to my speaker.  But, as I said the bluetooth takes an extra step to stream it and so the music is not in sync.  Its like a second and a half delay....

  • E4200 v2 - Uses multiple MAC addresses for the same device

    This unit seems pretty good at first but on looking at the Web interface I noticed that it was using multiple mac addresses for the same device and showing devices on the lan on the Wireless side and other odd things.
    After a week of running it the home server network started to get erratic, it would seem to all point to dns and dhcp issues in the router.
    Seems the V1 had the same issues that they did not fix on this.
    The Cisco connect software shows 5 devices the Web based utility shows 3??.
    Its pretty bad that they charge nearly $200 and cannot be bothered to finish the unit or address the issues that were in V1.

    I am afraid I didn't get the clear picture of the issue mentioned in the post. Could you please elaborate a little bit? If you connect a device/computer wired and then later you connect it wirelessly. It is obvious that you would get to see two different MAC addresses for the same device, one for the LAN adaptor and other one for WLAN adaptor. If that is what you are referring to?
    Secondly, may I  know, what issues did you face with DNS and DHCP in the router? Is it not able to resolve the DNS or something else or DHCP is not sending IP address to the clients?

  • The Windows SMB feature has file locking if multiple users are accessing the same file.  Does Snow Leopard Server File Sharing (AFP) provide similar features?

    The Windows SMB feature has file locking if multiple users are accessing the same file.  Does File Sharing (AFP) on Snow Leopard Server provide similar services?

    Were you ever able to solve this problem. I'm having similar issues since upgrading to snow leopard. Four macs connect to a Windows Server 2003 for shared files. Each user has full permissions & when we "get info" it shows read & write permissions. Two of the computers were running 10.4, two were running 10.5. Everything worked properly until upgrading to snow leopard. Some files let me copy, move, delete. Others either just hang up or we get a "no permission" error. Also getting a "pdf is in use" error, even when the file/folder doesn't contain a pdf. We had our IT rep check the server who said everything is in working order. They don't represent macs any longer but feel that it's a mac problem. I would have to agree since this problem only started after the upgrade, and the one machine that was not upgraded (still running 10.5.8) is not dealing with these problems.
    Lastly, I would install 10.5 back on all of the computers if I could, but the leopard disk that came with one of the computers wouldn't work with the 2 machines running 10.4 and I didn't see it available at the apple store. I'll buy it if it's still available, but why wouldn't the disks that I have work?
    Thanks for any help

  • Can I use multiple sa-ns500 on the same network?

    Is it possible to use multiple sa-ns500 speakers on the same network?  they seem to want to have the same name on the network and therefore only 1 will connect at a time?  Can I rename one somehow?  Thanks!

    Hello Brian,
    Welcome to Sony Community.
    Please check for the Secure Link option in the Home Theater System or A/V Receiver. This will help isolate the connection to the different Network speakers.
    Yes, you can use multiple Network speakers on the same home network.
    You can change the Device name using the Setting screen on the browser.
    Follow the steps mentioned on the page # 34 and 35 of the User’s manual to start up the browser of the Network speakers and change the Device name.
    If my post answers your question, please mark it as an "Accepted Solution."

  • Using a control item in the control block

    I want to do; using a control item in the control block, I can control the item in the detail block and I can navigate anywhere in the detail block on the condition.
    For example, I have a master block ,a detail block,a control block.
    before move the focus from the mater block to the detail block, the focus goes to the item in the control block and run a trigger and set properties for the items in the detail block, then navigate to the item in the detail block using go_item(?).
    Is it possible? if possible would you give me some example or idea?
    thanks a lot.

    well u can.May be you want to perform add / delete/ update through your buttons in forms

  • I am running Mac OS 10.6.7 I cannot run a java based program from the net when parental controls are set the error is The error is Load: class installer.CheckVersion 13. class not found  Help!

    I am running Mac OS 10.6.7 I cannot run a java based program from the net when parental controls are set the error is The error is Load: class installer.CheckVersion 13. class not found 

    Then, talk to the person running the lab.

  • Using a Control Surface with the Clip Mixer

    I'm contemplating purchasing a Mackie MCU to help automate some of the volume edits I have to make using 5 tracks in the Audio Clip Mixer over 80 hours of video.  I've tried to contact Adobe support, but they are about as cluless as a bag of hammers.  When I asked if the clip mixer works with a control surface (after 4 calls and 4 different agents) I was told no.  Which is total BS as there is toggle in the clip mixer called "Toggle Control Surface Clip Mixer Mode". They read from scripts and have no clue what they are talking about.   I guess I should not be surprised as its an outsourced call center staffed with drones who have never even used the software, much less in production!  Adobe you should be ashamed of your support, it's appauling! (BTW I own an online Magazine in the 3d industry and will be writting an article about your appauling support soon) 
    Anyway, onto my specific questions:
    1) The Mackie MCU has overlay cards for button mappings for many different apps, but PP is not one of them.  What functionaliy is mapped to the control surface specially from PP and the clipmixer?
    2) Is there a way to group channels so that keyframes can be written to multiple clips at the same time by using one fader?
    3) In the clip mixer there is a keyframe toggle, does such a toggle translate to the control surface?
    4) Sometimes I want to manually keyframe, rather thanan make adjustments while the playhead is moving, so I will simply click the fader slider to write a keyframe, manually move the playhead and then adjust the fader to write the subsequent keyframes.  As faders on a control surface can not be pushed like a button, is there a way to generate a keyframe from the control surface?
    5) Are there any known limitations using the control surface vs the software for both the clip and track mixers?
    Jeff

    The Mackie device has some quirks, and while basic functionality is there, PPro does not have as strong support with mackie as it does with eucon through the avid artist series.  The physical MCU keys switched between different versions of the device and what is undo on one is a different function on another, so sadly, depending on what model you get, those buttons may or may not be correct by the label that is on the device.  There is no way for us to tell which one you have.
    Clip mixer mode can be enabled either through the fly out menu in the clip mixer or by assigning a keyboard shortcut.  When engaged, it supports the faders, pan/balance/mute and solo.  If automation is engaged it will record automation, though you can't engage clip mixer automation via the control surface like you can on the track mixer.
    Unfortunately there is no way to group channels at this time, aside from making a submix, but I do not think this is what you were requesting.
    There is not a way to manually enter a keyframe via a button on the control surface.
    It is possible to customize some of the control surface buttons by hitting the button assignments button in the Mackie control surface window.  This is mostly limited to the function keys and a few others
    The touch and latch mode lights is a known bug.
    If you want more customization, the Avid Artist series has much better support in this regard.  We set up many soft keys, but you can also create your own very easily. 
    I will take a look at the other issues you have raised as they sound like bugs, but I also encourage you to file them through here: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform as it will help us to gauge how many are using the mackie protocol vs eucon.
    Thanks
    Todd

  • How do I use multiple local workspaces for the same website in VS2013?

    For quite some time I've been using VS2010 with multiple workspaces mapped from the same TFS branch to test different variants of a website in parallel. The internal web server (Cassini) seems quite happy to run multiple versions and simply maps a new port
    number for the second and subsequent instances that start up.
    We are now looking to move to VS2013, so have to use IISExpress since the 'internal' web server is no longer provided.
    How do I configure things so that if I open a single workspace, IISExpress runs against that workspace using the default port number (specified in the solution), but if I open a second instance in a different workspace it correctly uses a new port number
    and working folder. Do I need to invoke IISExpress using the command line (presumably from each workspace) and specify the relevant defaults or is there some way to enter this in the local config file for IISExpress?
    My initial attempt at editing to config file resulted in the 2nd and subsequent instance using the same physicalfolder as the first instance, presumably because the speficied site name and port number are the same!

    Hello,
    Thank you for your post.
    I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
    the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
    and Visual Studio Editor.
    Based on your description, I suggest that you can consult your issue on ASP.NET forum:
    http://forums.asp.net/
     or IIS forums: http://forums.iis.net/ for better solution and support.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How to choose witch window will open external links when using multiple Firefox profiles at the same time?

    I am using 2 firefox profiles at the same, one for working and another for reading news. I start them with "firefox -no-remote -P profilename", so there are 2 firefox processes running.
    It works well, but when I click a link in an external app (like in Google Talk), the link is opened in the first firefox process I launched. I mean, if I ran the "news" firefox first, it will always open the external links.
    Is it possible to change this behavior? I'd like all external windows to be opened in the "news" firefox, never in the "working". Of course I'll achieve that if I open it first, but if I first run the "news", then the "working", then I close the news for any reason, now links will always open in the "working" until I close it.
    I running linux (opensuse 11.3).

    '''traysh''',
    Profiles '''''period''''' are "unsupported" by Mozilla. Profiles are "there" but the developers want no part of non-developers using them or fixing anything related to Profiles that has been suggested in a Bug report, or documenting much related to Profiles. Profiles as we know them now are going to disappear from Firefox in the near future, although no specific version number or date has been fixed for that to happen. It is up to us user's to share our experiences with Profiles with other user's. I'm a relative noob to Linux, and all my experience with running multiple Profiles and -no-remote is with Windows OS's.
    '''cor-el''',
    So are you saying that on Linux external links will only open in the first Profile that was opened if multiple Profiles are running?
    And that external links won't open a Profile that isn't already running - if any Profile is already running?
    ''I wish the differences between Windows and Linux as far as '''-no-remote''' and running multiple Profiles were better documented for "us" Linux noobs over at the MozillaZine KnowledgeBase - hint. Unless I am not looking hard enough in the MZ KB for that information....''

Maybe you are looking for