Using multiple PC's as remote speakers?

I have a few PC's on my network at home. I also have a couple of airport expresses. I run I-tunes on each PC, sharing music throughout the house. From each PC I can stream music to multiple rooms using the airport express(es) as remote speakers.
What I want to do is also stream to other PC's as if they were remote speakers. I want other PC's in my network to show up as remote speakers so I can stream synchronous music to any room with a PC AND any room with an airport express.
Can this be done??

Hello.
Any feature requests can be submitted to the following links below
http://www.apple.com/feedback/itunesapp.html
http://www.apple.com/feedback/airportexpress.html
*With Airtunes you are able to stream music to multiple speakers meaning
1. Multiple Airport Expresses connected to Multiple speakers
2. Multiple Expresses connected to Speakers & also hearing the audio from the computer it is broadcasting from.
Now the bigger question I believe you are asking is can other computers pickup on this broadcast of sound?
Never tried it myself. I am not aware of iTunes being able to pickup the broadcast from the speaker selection in the bottom right hand corner. I am aware of it being able to broadcast it's sound to other speakers on the network though.
Hopefully other users can post their thoughts and how they got this to work. At this current time I know you can connect multiple expresses, and have it broadcast throughout the house based on where each express it is and the speakers they are connected to.

Similar Messages

Using Bose system to drive remote speakers via Airport Express / iTunes

I want to connect my Airport Express which is configured for remote speakers in iTunes to my Bose system. My question is which input on the Bose Lifestyle 50 system do I use; ie which input on the "multi-room interface" do I connect to the AE. I think it must be the "aux" but before I buy a suitable cable I would like to be sure.

Use a mini-jack to double RCA. That is all that I used. In the past I have used my APExpress and used the audio out port and all I needed was a mini-jack to double RCA.I have a TV, and a DVD player interfaced through my Denon AVR driving Bose Acoustimass 10 speakers.
MJ

Error 15000 when trying to use air port express with remote speakers

does anyone know how to fix this prob? Thanks in advance

We never think that easiest solution can works, but it does!
http://discussions.apple.com/thread.jspa?messageID=11310951&#11310951

About iPad iOS 4.2 beta Airplay can't use multiple speakers?

About iPad airplay can't use multiple speakers?
My iPad use the latest ios4.2 beta1 ,there is 3 airport express in my house.
In iOS 3.2 I can use the App "Remote" to control 3 speakers perfectly,but "Remote" even can install in ios4.2 ,not use smoothly.
After I upgrade iOS to 4.2, I can use Airplay to control each speaker without "Remote",but can't use multiple speakers at the same time. Is anyone like me?
Is there have any other solution can fix this problem?
Thanks!

I completely agree with Tamara, if you are running iOS 4.2, then you should also realize that there are two aveanues for you to get questions answered
1) the developer forums (there is a specific forum area for 4.2 questions, marked in a big red banner across the top saying something about confidentiality.)
2) The bug reporting tool available to developers, noted at the top of the iOS 4.2 forum page. When you go there read the format intructions linked to at the top of the form to ensure you put it in the format that is required for formal developer bug reports.
Jason

ITunes can't see airport express remote speakers using airtunes

Running Windows Vista, I have been through the process of joining the Airport Express as a client to an existing wireless network and have got a green light showing (hurrah). iTunes is not, however showing the option of selecting that AE to use as remote speakers.
I have checked that the 'look for remote speakers....' option has been selected in iTunes and have opened port 5353 UDP on the Windows firewall, and have tried turning the firewall off altogether, but still no joy.
As with other Vista users I can't see the AE using the Admin Utility, but I can get to it using 'Other' and the IP address that the DHCP server on my wireless router (Buffalo) has issued. On the music tab on the Base Station the 'Enable AirTunes on this base station' check box is connected.
So it seems that everything is good to go, just that iTunes doesn't display the base station as an option to select in iTunes - can anyone help? Thanks

Oh. My. God.
Who knew that the "multiple speakers" window can be resized?
Quite by accident, I discovered my other two AE's "hiding" outside the window...
Sheesh.

Music has skips on local speakers when using remote speakers via airtunes

Using airtunes connected to a stereo the computer (Windows media center) "skips" like a bad CD but the remote speakers never do. Turning off multiple speakers and the skipping goes away. Have upgraded software, wireless router, and airport but have not found anything that resolves the issue. Using iTunes 6.0.4.2
Intel DUO core Windows XP Wireless router is a Linksys
Windows XP

Hello ecolman,
The article linked below details a number of troubleshooting steps that may help restore functionality to the Remote app.
Remote app for iPhone, iPad, or iPod touch can't connect to iTunes or Apple TV
http://support.apple.com/kb/TS1741
Cheers,
Allen

Using a PC running iTunes as remote speakers

I have two Airport Express in my house, which are great for playing music in different rooms remotely, powered by my primary PC in my office. However, I also am buying a PC for my living room to put above the fireplace. There is no room for another set of speakers for another Airport Express there, and I don't want to buy another one. What'd I'd like to do is use this new PC running iTunes as a set of remote speakers, recognized in iTunes like the Airport Express speakers. That way I could play the same music at the same time in many rooms of my house.
Does anyone know how to do this?
If not, consider this is a feature request, i hope Apple will give it consideration.

Hello.
Any feature requests can be submitted to the following links below
http://www.apple.com/feedback/itunesapp.html
http://www.apple.com/feedback/airportexpress.html
*With Airtunes you are able to stream music to multiple speakers meaning
1. Multiple Airport Expresses connected to Multiple speakers
2. Multiple Expresses connected to Speakers & also hearing the audio from the computer it is broadcasting from.
Now the bigger question I believe you are asking is can other computers pickup on this broadcast of sound?
Never tried it myself. I am not aware of iTunes being able to pickup the broadcast from the speaker selection in the bottom right hand corner. I am aware of it being able to broadcast it's sound to other speakers on the network though.
Hopefully other users can post their thoughts and how they got this to work. At this current time I know you can connect multiple expresses, and have it broadcast throughout the house based on where each express it is and the speakers they are connected to.

Can I use AirPlay with my ATV2 to remote speakers on my network?

I use the internet Radio on my ATV. I was able to use remote speakers through my network and Airplay when my ATV1 was operating. Now using ATV2 and use of remote speakers is not an option any more. Is there a fix?

That is not possible on ATV 2

Cannot connect to remote speakers using Airport Express

Yesterday I was able to connect to my hi-fi using remote speakers in iTunes 6.0.4 through my Airport Express (AE) and take full advantage of Front Row, however later in the day the speaker selecton pop-button in iTunes disappeared. I did a hard-reset of the AE unit, shutdown the computer, checked the preferences selection in iTunes etc, all without success. I checked the discussion boards of both iTunes and Airport for a solution. Found something interested where someone said that they shutdown the computer and went to bed and in the morning, hey presto everything was working. He thought that having a good night's sleep was the solution. So, I shutdown the computer and went to bed. The next morning, the light on the AE was green and after booting up my iMac Intel the pop-button reappeared (I still don't know what solved the problem) but now it will not connect to the speakers. It tries but gives us after 30 seconds or so.
Here is what I have done so far: I used Airport setup assistant to set up the AE. During that process I selected to join an existing network that is provided by my Airport Extreme base station and I selected to only use the AE to share a printer and play iTunes using WDS bridging. This process works every time.
Right now, the light on the AE unit is flashing amber. In Airport Admin Utility both the Extreme and the Express are listed but the Extreme has an IP address of the 10.0.x.x variety whereas the Express has an IP address 169.254.x.x variety! Strange. If I double-click on the Express it takes an age to get a response and when the response eventually comes - asking for the password I then get an error saying that "the airport admin utility was unable to read the configuration of the selected base station.
I have tried resetting and repeating the above without success. Therefore, any other ideas or help would be greatly appreciated. I want to boast about Front Row to my Windows friends without the embarrassment of connection problems

I am having almost exactly the same trouble with an Airport network I recently set up in my home. I have a G5 with a brand new Airport card, an Airport Extreme Base Station (also brand new) in the same room acting as my internet portal, and an Airport Express (yup--brand new) downstairs piping iTunes to the stereo.
I could get the G5 and Extreme base to talk without a hitch--they are right next to one another, after all. When I tried to link the Express into the same network, the Express vanishes. When I tried moving it into the same room with the Extreme, I could find it, and play tunes through a set of headphones. Moving to an outlet in the hall outside the room, it still worked. Moved to an outlet on the far wall of the room across the hall, it would play only sporadically, dropping out about 4 seconds out of every six. Anywhere else, and it wouldn't show up at all.
However, when I set up the Express to be a separate network, my G5 was able to access it and play music without difficulty, anywhere in the house. I've been playing iTunes on my stereo for weeks, with the downside that I can't do that and surf the web at the same time.
Last night I tried the experiment of moving the Extreme Base Station around. With my G5 in the living room, in the approximate center of the house (1/2-level above the basement, 1/2-level below the office--it's a split level), I was able to access the Express and play tunes on the stereo as usual. With the Extreme Base downstairs, right next to the Express, my G5 could not even locate its signal. Fifteen feet closer to the center of the house (but still downstairs): couldn't find it. At the base of the stairs: couldn't find it. At the top of the stairs (20 feet from the G5, but just around a corner): couldn't find it. Three feet out into the foyer at the top of the stairs (and now in a direct line of sight to the G5): 20-30% signal. Keep in mind that during all this, I could switch over to the Express network at will (75% signal) and play music downstairs without a hiccup.
It seems to me that there's something wrong with the Extreme Station itself (or at least, with the way it's trying to communicate). If it were external interference due to an outside network, a microwave oven, or a 2.4 GHz cordless telephone, I would expect it to effect both networks equally--but it isn't. The Express seems impervious. I've noticed in another set of posts that some people with wireless connection problems have found that switching from the most recent version of the Extreme Base firmware (5.7) to an older one (5.5.1) has fixed the problem. I plan to give it a shot myself. I'll let you know how it turns out.
Dual 2.5 GHz G5 Mac OS X (10.3.9)

ITunes no longer allowing use of remote app or recognizing remote speakers

Weird problem as all of this worked as of 24 hours ago. I am no longer able to share my music (either via the remote app or between two computers on the same local network) nor will iTunes recognize the existence of remote speakers (again, all worked fine as of yesterday).
I've made no changes to firewall, etc. I've confirmed the network is functioning, the Airport express is connected, all current versions, etc. Firewall allows incoming connections for iTunes. Further, i've tried:
1) Restarting iTunes, the iMac in question and the iPad
2) Using remote on two different devices
3) hard rebooting the airport connected to my stereo
4) reinstalling iTunes and remote
Home sharing is turned on however the iPad's remote app cannot find any libraries. When i try to add a library outside of home sharing, iTunes doesn't see any device trying to connect.
I'm well stumped. Anyone else finding this issue and are there any suggestions?

Same problem. I'm running itunes 10.1.2.17 under win 7.
Here's what I did to fix the problem. Basically you need to create a new exception in your firewall to allow itunes UDP communication.
control panel>system & security>Windows firewall.
Advanced settings>inbound rules
New Rule> Program > browse to C:\Program Files (x86)\iTunes and pick itunes.exe
Allow the connection>next>next
Give it a name like iTunesUDP.
Now click on your new rule "iTunesUDP" and select properties.
Click the protocals and ports tab.
under protocal type select UDP.
That should do it.
Let me know if it worked for you.

Itunes (MAc & Windows) shows no remote speakers using AIrport Express

I have both a Win XP PC and a Powerbook G4 connected to a wireless network using a D-Link DI-624 router. Both computer can connect to the internet, the Powerbook is connected wirelessly.
I've set-up my airport express on the wireless network using a static IP adress, and it gives me a solid green light. Airport Express firmware is 6.3 and it is configured as a client on the network.
I can not access the remote speakers on iTunes on either the Mac or the PC. Both computers have the "Search for remote speakers" checked in iTunes. I've tried everything, including re-booting etc. but with no luck.
Does any one have any ideas? Could a port in the D-Link router be blocking access, since both computers are unable to see the remote speakers?

Problem solved.. The unit wasn't getting the correct IP adress. I re-configured using DHCP and it worked.

I want to set up wireless speakers in my yard using my phone as the remote to run music on my computer and ipad.. what do i need to do this?

I want to set up wireless speakers in my yard using my phone as the remote to run music on my computer and ipad.. what do i need to do this? I have an airport extreme.. wireless set up.

I found these speakers after I posted
Audio Unlimited SPK-VELO-003 Premium Indoor / Outdoor Wireless Speaker System w/ Remote Contro
I am thinking someway I should be able to send my music through airplay or homeshare to a speaker... hopefully wireless outside.. i know you can do it inside wiresly but can you do it outside?
I do not want to run speakers wires all over my yard.
Thanks

Using apple remote with iTunes 9 and airport express/remote speakers

Hi,
Does anyone know why the apple remote will control the hardware volume for the speakers on my mac, but when playing via the airport express connected to remote speakers why doesn't it control the volume slider in iTunes?
This would be really useful as at present I need the apple remote to control track selection and play/pause, but another remote to control volume.
If it isn't possible now, can Apple please add it to the pile of suggestions for the next version build of iTunes?
Many thanks

luvs2spooge wrote:
This would be really useful as at present I need the apple remote to control track selection and play/pause, but another remote to control volume.
If it isn't possible now, can Apple please add it to the pile of suggestions for the next version build of iTunes?
edit: it works just fine. check your settings in preferences > devices
JGG
edited by the Jolly Green Giant (where Green stands for environmentally friendly)

Is it still necessary to use a third party app in order to stream SiriusXm radio signal via iTunes? Would like to use iTunes to handle the signal and send out to remote speakers?

Is it necessary to use a third party app in order to stream SiriusXm signal via iTunes to my remote speakers?

Is it necessary to use a third party app in order to stream SiriusXm signal via iTunes to my remote speakers?

New Version Of iTunes Wont let me use "multiple speakers" thru airtunes...

The New Version Of iTunes Wont let me use "multiple speakers" thru airtunes with airport express.
I have used airport express to play music while simultaneously playing it thru my computer speakers, but the new version of iTunes wont let me select "Multiple Speakers" from the menu at the bottom of the window

There doesn't seem to be a link to this firmware update, can you repost it? I'm having the same problem.
Thanks
J

Using multiple PC's as remote speakers?

Similar Messages

Maybe you are looking for