Using multiple refinement web parts on the same page but have them hidden until needed

I have a search results page that has several different Core Results web parts on it (each is connected to a different result source). all hidden by tabs using the HillbillyTabs interface
http://www.sharepointhillbilly.com/Lists/Posts/Post.aspx?ID=42
unfortunately you cant share a refinement web part across multiple results web parts. So I am left trying to figure out how to hide several refinement web parts and only show the active refinement webpart when the result source tab is selected.
The template im using is an OOTB standard search results template with the refinement panel on the left navigation zone and the core results web parts configured in the main content zone.
Scenario:
Search text box passes query to multiple results web parts on a page. Only one results web part is displayed at a time (active tab). The refiner for the active tab shows and displays its refiners in the navigation panel.
There are multiple refinement web parts in the navigation panel associated with each core results web part in the main content zone. These refiner web parts are configured with custom refiners.
the results page displays just one results web part at a time via tabbed interface.
I am trying to figure out how to make the refiner web parts show and hide depending on which tab is selected.
Any help pointing to someone thats already attempted this would be appreciated!
Eric

Hi,
For your issue, you can consider using SharePoint Search Navigation which can achieve a similar feature but not on the same page.
Search Navigation allows users to move quickly between search experiences listed in the Navigation. Navigation is displayed in the Quick Launch control on search pages, and can also be shown as a drop-down menu from the search box.
For more information, you can refer to the blog:
http://blogs.technet.com/b/tothesharepoint/archive/2013/11/13/how-to-add-a-customized-search-vertical-to-your-search-results-page-in-sharepoint-2013.aspx
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Similar Messages

"you can not use multiple instance of Program at the same time"

Hello @ all,
I have a Problem, after the installing from Acrobat Testversion and acrobat reader in version in "all Combination" 8 an 9.
I get this misstake information "you can not use multiple instance of Program at the same time" if I want open more then 1 .pdf.
If I have no pdf open, but acrobat/reader so i can´t open with the same Misstake.
I have deinstalled and installed, Allways I bekame the same information. I tryed all things to clean and know i don`t know forward.
Important: by Drag an Drop in the Acrobat Reader it is going, but by direct click on the pdf i get mistake.
Maybe, you know what I can do!
Thanks for help!

Installation of both Acrobat and Reader in the same Windows machine is not advisable. If I were you, I would remove both completely and then reinstall the one you want to keep.

HT4314 I have two children each with an itouch. Is there a way of using the same AppleID but giving them separate game centre "me" users?

I have two children each with an itouch. Is there a way of using the same AppleID but giving them separate game centre "me" users?

See:
Multiple game center accounts for...: Apple Support Communities

I used to open many tabs in the same page and i move from one to other by mouse but since3 two days the tabs open in the same page normaly but i can't move from one to other when i clik with mouse on any tab it don't open/ do u have any solve for this?

i used to open many tabs in the same page and i move from one to other by mouse but since3 two days the tabs open in the same page normaly but i can't move from one to other when i clik with mouse on any tab it don't open/ do u have any solve for this

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Low memory when using programs like iPhoto, office at the same time I have 4 GB ram

low memory when using programs like iPhoto, office at the same time I have 4 GB memory ram 3000 graphics 384 mb

Do you have a question?

HT4356 I have an air-print enabled printer: HP Premium e-all-in-one C310. Can't print from iPad iOS6. They're on the same network, but have different IP addresses. On the iPad it's 192.16.1.126 and on my printer it's 192.168.1.133. Can I match them? H

I can't print from my iPad2 to my air-print enabled printer (HP Premium e-all-in-one C310). They're on the same network, but have differed IP addresses! The iPad IP is 192-168-1.126 and the printer is 192-168.1.133. That's the only difference I can see. Is there a way to fix this?

fyi:
you put periods between the numbers.
Each device needs a unique number.
for the 192.168.1 the right must number should vary. 192.168.1.x
the numbers you have look ok.
Power off all devices: wifi router, printer, ipad.. wait 10 minutes. poweron router ... wait power on printer wait then power on ipad.
cross fingers.
Robert

Can I get my wife and my phones to synch to the same iMac, but have different address books - when synching we keep ending up with all the contacts on both phones...

Can I synch 2 phones to the same iMac, but have different address books?

If you and your wife have separate user accounts on the Mac, then each of you will have separate libraries to sync. You can them maintain separate address books, calendars, apps, etc.

Is there a way to code with multiple people at once on the same page?

In my class today we were tasked with building a web page and it would work so much better if we were able to work on the same pages all together at once.

There is no way to do this with DW, or any other coding environment that I've ever seen.
What does exist is a check-in/out system that allows multiple people to work on a single file, at different times. One person would check it out to make a change, save and check it in so the next could check it out and make their edits. That way an errant save from one person wouldn't accidentally overwrite the work of another who has it open on their machine.

I am unable to open any app on my iphone. While i'm trying to open an app, it just shakes the screen and it does not get open and remains in the same page. It worked fine until I charged the phone in my laptop. Please can anyone help me to recover it?

I am not able to open any app on my iphone. While i'm trying to open an app it just shake the screen and it does not open and remains in the same screen. It worked fine until I charged the phone this evening. After that suddenly I'm facing this. Please can anyone help me to recover this issue? pls!

This is covered in the basics section.
A restore loses nothing.
A restore does. If you are using the iphone as designed, then everything should be on your computer.

How to open 2 playlist at the same time and have them in two diferents windows?

until iTunes 10 i can open more than one playlist at the same time, and have this playlist in diferents windos but since 11 i cannot do it anymore.. is anoying if i need to fast switc music froms playlists.. so it become usseless...
i think the aim of the previous itunes (before 10) it was to give a service of arranging librerys of musics.. but now, it becomes a sell party program...
and only to you to know, if i dont put my credit card on my account i cannot even buy FREE programs on appstore...
thats bad... very bad..
if you need some tips how to do it proprerly here you got one..
if is not broken... dont fix it...
now i have my iphone 6, my ipad and the iphone of my wife, but i have itunes 10 because is the one who have the multi windows possibilities.. and now i cannot sync the devices..
thats very bad..
i hope you can help me...
if you dont understand my problem i can show you via video..
thanks

You could create an applescript to do it.
tell application "Dreamweaver's Full Name"
activate
end tell
tell application "BBEdit's Full Name"
activate
end tell
tell application "Acrobat's Full Name"
activate
end tell
Replace the quoted text (leaving the quotes) with the full name of the application, and save the applescript as an application bundle, and put it in your dock.
NOTE: You may have to put the full path to the application for it to work (I.E. /Applications/Dreamweaver.app). If you do, encase the full path in quotes.
Good luck!
Message was edited by: joshz

Project Web App (PWA)/Sharepoint 2013: is there any way to display two different views of the Project Center PWA web part to the same user in a site collection?

i want some of my users to see all the projects in the Project Center at my top-level site, and those same users to see only the projects they own at a subsite level in Project Center. that way they could see an 'all project' view on the homepage and only
their projects on their dashboard pages (which also have an instance of Project Center web part on them). i have searched and searched but cannot find a solution to this. is there any way to acheive this functionality? thanks in advance for your assistance!

I have tried this in the past, but was not successful, as far as I can recall. Once you access the project center webpart in one page, the view will be retained regardless where you see it again. (until you apply a different view or clear your browser cache).
May be an easier solution is to display a 'report' on the home page with ALL projects (much easier to do), and use the Project Center webpart for the My projects view as it is easier to achieve via Project Server Security, than a report.
Cheers,
Prasanna Adavi, Project MVP
Blog:
Podcast:
Twitter:
LinkedIn:

Using multiple different IP's on the same computer

I'm running 10.6, I figure you need to do something on the command line to do this...
Let's say that I have 3 connections coming into my computer - a WIFI, an ethernet, and a dial-up, and each has a unique IP.
How do I specify what application uses what IP? For example, let's say I want Safari to access the internet via the Airport IP, Firefox to access via the ethernet IP, and Opera to access via the dial-up IP.
Thank you for your help.

OK, so let me ask another question:
Here is my printout from ifconfig -a:
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0 mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.2.1 netmask 0xffffff00 broadcast 192.168.2.255
inet6 fe80::21f:f3ff:fe4e:68f9%en0 prefixlen 64 scopeid 0x4
inet 192.168.1.103 netmask 0xffffff00 broadcast 192.168.1.255
ether 00:1f:f3:4e:68:f9
media: autoselect (100baseTX <half-duplex>) status: active
supported media: autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 10baseT/UTP <full-duplex,flow-control> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback> 100baseTX <full-duplex,flow-control> 1000baseT <full-duplex> 1000baseT <full-duplex,hw-loopback> 1000baseT <full-duplex,flow-control> none
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.1.100 netmask 0xffffff00 broadcast 192.168.1.255
ether 00:1f:5b:ca:24:fc
media: autoselect status: active
supported media: autoselect
fw0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 4078
lladdr 00:1f:5b:ff:fe:12:40:48
media: autoselect <full-duplex> status: inactive
supported media: autoselect <full-duplex>
en4: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::21c:42ff:fe00:8%en4 prefixlen 64 scopeid 0x7
inet 10.211.55.2 netmask 0xffffff00 broadcast 10.211.55.255
ether 00:1c:42:00:00:08
media: autoselect status: active
supported media: autoselect
en5: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::21c:42ff:fe00:9%en5 prefixlen 64 scopeid 0x8
inet 10.37.129.2 netmask 0xffffff00 broadcast 10.37.129.255
ether 00:1c:42:00:00:09
media: autoselect status: active
supported media: autoselect
en0 is ethernet and en1 is airport. So now, all my traffic will be going out through en0 because it's listed higher, correct? Now, if I go to my network control panel, go to set service order, and put airport (en1) higher than ethernet (en0) then all my traffic will go out through airport, correct? Now I did do that, and I typed ifconfig -a again, but the listing still showed the same, so do I need to restart to make the change effective or is there a command for the system to flush and change the order immediately?
And how do I check for sure on which interface my outbound traffic is going through?

Plaf: Using multiple Look'n'Feels at the same time

Hi
in our application we use different color schemes. I know have a bug that forces me two provide two different UI implementations for the same class (JTextField). One UI in the normal context (grey) and one in a special edit context (kinda yellow).
Id like to know what is the best practice to solve this issue? I would prefer not to write a special constructor which contains the desired UI-Name but rather as such that the parent Panel knows "i am yellow, so my kids need to be yellow too"...
What is the best way to accomplish this. Has anyone a "best pratice" idea or does swing support "conditional look and feels" ?
Thanks in advance!
Matthias

This is very strange, difficult to guess the cause... never had such an issue. Normally when the object to which the audio is attached disappears the audio stops. So in your case going to a next slide should stop the audio of the previous slide. Same with object audio.
Do you have the different audio clips (one per slide) in the Library? Could you try to delete the audio on the slide and drag it again from the Library to see if you have the same result? And what happens when you attach the audio clip to an object on the slide (you can create a totally transparent rectangle with no stroke that will not be visible to attach the audio).
Lilybiri

Can my girlfriend and I use the same computer but have 2 itunes accounts?

I've got itunes on my computer and have an iphone synched. My girlfriend has just bought an iphone but her old computer is broken, so she has an itunes account but can't access it.
She has connected her iphone to my computer and at the set up specified that it was a new phone, however there doesn't seem to be any option for her to select a different itunes account?
Is it possible to run 2 itunes accounts off of 1 computer?

Russell_B wrote:
Is it possible to run 2 itunes accounts off of 1 computer?
you could authorize your iTunes to play/use content purchased with her iTunes account.
that's basically very easy. all you have to do is +log out+ of one account (click on the account name in the Store window and select +sign out+ from the pop-up dialog) and into the other, and then they will both be authorized. (be sure to just *log out*, not de-authorize ).
also, see _*How to use multiple iPods with one computer*_.
JGG

Multiple marketing labels printed on the same page

Hi Experts,
we are using marketing campaigns in order to get a label for each business partner that to target group. For printing the label we are using a form which we assign to the campaign at execution start time.
The problem is that we get a page for each business partner with its label printed, but what we want is 24 labels be printed on the first page, corresponding to the first 24 business partners of the target group, and so on with the rest of pages and business partners.
Does somebody know how to achieve it? Any suggestion?
Thanks in advance.
Best Regards,
Rosa

Hi Rosa,
I also have same requirement.
I know its old post.. still Did you get solution for it?
-Thanks,
Ankita

Using multiple refinement web parts on the same page but have them hidden until needed

Similar Messages

Maybe you are looking for