Using "Number Only" yet still "Chapter" in Portrait Index

I am using iBooks Author for a collection of short stories so I'd like to eliminate the word "chapter" from the "chapter" page which is displayed in Portrait mode. I used the "Number only" feature to eliminate the word "chapter" from the heading of each chapter. So far so good. But when I review the book on the iPad, the "chapter" page with the thumbnails still has the word "chapter " displayed. See image attached.
Any suggestions appreciated.
Thanks.

Dear IMacUser2012
Did you get any solution on this query ,
Can any one suggest me on this

Similar Messages

  • How can Adobe Acrobat have an invalid serial number, but yet still be able to successfully install?

    (with the invalid serial number causing it to not be able to be registered with Adobe Systems, Inc.)
    Adobe Systems says the serial number is invalid, but the product successfully installed as normal with no errors.
    If the serial number is invalid, shouldn't the installation have terminated and stated that the serial number is invalid?

    Hi caseyclaassen,
    Acrobat would continue the installation even without serial key but then it will be good only for 30 days.
    After the trial poeriod is over, it will prompt you to enter a valid serial number to continue using it.
    If you have purchased a valid serial number and still getiing this error, you might want to refer to the KB Doc : http://helpx.adobe.com/creative-suite/kb/error-invalid-serial-number-acrobat.html

  • Is it possible to register my iphone 4 to find my iphone app using iphone ID number only? Because Iooks like I miss placed my iphone somewere and I didn't register it to find my iphen app yet. thanks

    Dear all,
    My friend just lost her iphone 4 and she didn't has find my iphone app. So is it possible to track her iphone using "find my iphone app" by key in its ID number only? Or is that any other way to find it?
    Thanks

    No

  • I've been using my cell phone number to imessage from my ipad for a while now, but yesterday I got signed out of I message and when I signed back in, I didn't get the option to use my number, only my email adress. How can I fix that?

    I've been using my cell phone number to imessage from my ipad for a while now, but yesterday I got signed out of I message and when I signed back in, I didn't get the option to use my number, only my email adress. How can I fix that?

    Hey bill.rizzo2,
    Thanks for the question. I understand your phone number is missing on your iPad as an option for iMessage. The following article provides steps to resolve this issue:
    iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    Phone number missing on iPad or iPod touch
    If your phone number isn't listed on an iPod touch or iPad, follow these steps:
    1. Update to the latest version of iOS.
    2. Verify that you're using the same Apple ID that you're using on your iPhone.
    3. On your iPad or iPod touch, sign out of your Apple ID in the following locations:
        - Settings > Messages > Send & Receive. Tap your Apple ID, then tap Sign Out.
        - Settings > FaceTime. Tap your Apple ID, then tap Sign Out.
    4. Sign in to your Apple ID with FaceTime and iMessage.
    If your phone number still isn't listed, follow these steps:
    1. Sign out of your Apple ID on all iOS devices, including your iPhone, in the following locations:
        - Settings > Messages > Send & Receive. Tap your Apple ID, then tap Sign Out.
        - Settings > FaceTime. Tap your Apple ID, then tap Sign Out.
    2. Sign in to your Apple ID on your iPhone.
    3. When activation is complete, your Apple ID and all verified email addresses should be visible in Settings > Messages > Receive At and Settings > FaceTime.
    4. Sign in to your Apple ID on your other iOS devices.
    Thanks,
    Matt M.

  • I have restored my iphone 3gs after having only the apple logo, it took me through all the restore, a page saying 'congrats your phone is now unlocked', and allowed me to chose to set up from new or back up....yet still displays only the apple logo.

    I have restored my iphone 3gs after having only the apple logo, it took me through all the restore, a page saying 'congrats your phone is now unlocked', and allowed me to chose to set up from new or back up....yet still displays only the apple logo.

    Restore as New...
    Redownload your Purchased and Free Apps using the Apple ID you Originally used...
    iPhone User Guide
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • I brought iPhone 4 and iMessage wont use my number only my email HELP!!

    iMessage wont use my number only my email. its not giving me the option to use my number only my email and its saying "waiting for activation" but i can still text but only with email what do i do ive tried everything????

    Check this out:
    http://support.apple.com/kb/TS4268
    Pay close attention to Step 7 in the "Troubleshooting telephone-number activation. Constantly fooling around with it will only cause more delay.

  • Where-Used using serial number only

    Hi experts...how can i track serial numbers and inspection lots from roh material without batch assign but with serial numbers ? these roh materials were used in PO without batch assign to FERT material yet. Is possible use where-used list only to manage serial number or only using batch administration over the serial numbers ?
    i will apreciatte any answer!
    Regards
    Marco Antonio Trois Endres

    sorry...i will try explain...i need to get results in inspection lots type 01 with serial numbers, results, especifications, etc. These roh material were used in production orders. If i use qc20, 21,22 to issue one certificate for orders or a single inspectin lot type 03 or 04, i think is impossible to get results from inspection lot 01 too, because chvw table used by where-used list was not updated, if roh and fert materials dont use batch management.

  • Exporting using quicktime only gives me stills

    Hi,
    I'm using FCP 4.5, and have been using it for a couple of years. This afternoon I was batch exporting a bunch of short videos, and when I viewed the results, they were all the correct length, but only a still image.
    When I did the same operation yesterday, it worked properly. And when I tried to re-export things I'd previously exported properly, I'm only getting stills!
    What gives? I haven't changed anything, nor have I installed updates.
    Thanks!

    Hi,
    Thanks for the reply. I'm working with several source formats (DV, .mov, and others). They all seem to be suffering the same thing.
    Our use of FCP may be slightly uncommon. We do speech research, and we usually need to generate many very short clips out of a longer one, so I segment a video, 'make independent clip', move to the asset pane, and re-name as appropriate. When I've segemented everything, I can export or batch export directly out of the asset pane (rather than the sequence). Up until very recently, this has been easily done.
    I've done a little more experimenting now. Quicktime conversion works on the sequence, but not on the clips in the asset pane. And file/export/quicktime movie (as opposed to quicktime conversion) works from the asset pane. But I'm still stumped - I can't do what I need to do.
    One more detail - it's possible that iTunes was updated around the time that this snafu started occurring.

  • Creative Cloud Student and Teacher Edition .I use the Macbook.I got the mail that said my order was checked,but I don't get the number.So I still use trial.Hoe can I change my character into member?

    Creative Cloud Student and Teacher Edition .I use the Macbook.I got the mail that said my order was checked,but I don't get the number.So I still use trial.Hoe can I change my character into member?

    This is an open forum, not Adobe support... you need Adobe support to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

  • Bing does not appear in add ons or in the search engine list or control panel, in fact there is no reference to it on my computer, yet still, it has hijacked my search and the normally very useful 'highlight, right click, open search in a new tab'

    Bing does not appear in add ons or in the search engine list or control panel, in fact there is no reference to it on my computer, yet still, it has hijacked my search and the normally very useful 'highlight, right click, open search in a new tab'

    Install, update, and run these programs in this order. They are all free for personal use, but some have limited functionality in the "free mode" - but those are features you really don't need to find and remove the problem that you have. '''(Not all programs detect the same Malware.)'''
    Malwarebytes' Anti-Malware - [http://www.malwarebytes.org/mbam.php]
    SuperAntispyware - [http://www.superantispyware.com/]
    AdAware - [http://www.lavasoftusa.com/software/adaware/]
    Spybot Search & Destroy - [http://www.safer-networking.org/en/index.html]
    If these don't find it or can't clear it, post in one of these forums for specialized malware removal help:
    [http://www.spywarewarrior.com/index.php]
    [http://forum.aumha.org/]
    [http://www.spywareinfoforum.com/]
    [http://bleepingcomputer.com]

  • Use of unknown number only

    Sometimes when i've called on mobile phone with skype caller id show "+21" or "+12345' or "unknown number" how i can show unknown number only ? i don't want to use +21 or 12345

    Hi, Saeid.dezc, and welcome to the Community,
    There are times that Caller ID seems more art than science.  Skype does not control when a generic caller ID such as ----------, "Unknown." or the numbers you cite appear.  If no caller ID data is determined (or, if the data is corrupted in transmission), the telephone company that connects the Skype call to its final destination may fill in the blank with whatever that company uses.
    Regards,
    Elaine
    https://en.wikipedia.org/wiki/Caller_ID
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

  • TS2771 my ipod used to only charge when it was completely off but now i have to wrap the usb charger around my ipod and it shows the charging but it still doesnt charge

    My ipod touch 4th gen used to only charge when it was completely off, but now a week or 2 later i am having to wrap my charger around my ipod to make it start charging but soon enough that still isnt charging.
    Any help?
    Thank you

    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    If nothiing above helped, restore the iPhone to factory settings >  Use iTunes to restore your iOS device to factory settings

  • I blocked a number, but yet i still get calls?

    I blocked my ex's number, but yet i still get calls by him. I blocked him about 5 days ago and nothing happened but today i got 6 calls in the matter of 30 minutes. And when i check my recent calls, his name or number isnt there. Can anyone tell me if this is just a glitch in the system or what is going on! Thank you!

    All blocking does is to prevent the phone from ringing by sending the call to voicemail. They can still leave a message in voicemail.
    There is no way to actually block a call, this is something that may be done on the carrier level.

  • IMessage title bar shows contact number only

    With the iMessage, I found if the person is using iMessage instead of text messages, the title bar shows the +1 (XXX) XXX-XXXX number, rather than the contact name, which is already in the contact.  Even I tried to add the number again, it still shows me the number only.  Some people don't have this issue, but I do.  Is there a setting I can change to fix this?  Thanks!

    I am having the same problem, all imessage messages are showing up as +1 (xxx) xxx-xxxx and as a result aren't showing the name.  I have to add that number to the persons name to get the name to show up, but then I have duplicate numbers in my contact details for eacher person, with one with a +1 on it. 

  • Personnel Number not yet assigned

    Dear Gurus
    I was hiring an employee through transaction PA40. after entering details on first page the employee number was assigned but i did not save the entries due to change in plans.
    the issue im facing is that the personnel has been generated without any details and it does not allow me to re enter on that number it gives me the message personnel number not yet assigned.
    can you tell me what should be done and how ...?
    1) can we enter details in that auto generated number.
    2) or can we delete that particular number?
    Regards
    Saad Nisar

    Dear Mr. Saad,
    1. In the case of missed PA40, use the same number in the PA40 screen and execute it. You should run atleast IT0000 and IT0001 and further, you can do with PA30.
    2. For all of you in the forum, In case you have not saved but system is showing PERNR occupied then recheck it in PA30 and if you find that the number has no data and still system is not taking that number then do the undermentioned:
          Suppose you missed Personnel No. 101(No data)
           (a)    Go to PA04 You will find Number Range (display, create and status).
           (b)    Go to Status and see which number has been occupied. You will find last number is 101. Rewrite that number as 100, save and back.
           (c)    Now you use PA40, system will give you 101 and you can use this number again.
    Try this, Pl contact if you still face any problem.
    Best Wishes
    Venkatesh

Maybe you are looking for