Using Object Group.
I am using the forms 6i. And i have a problem with attach Object Group.
After attach, the form do not execute.
I have a question: What the values the Object Group utility on the registry?
Or if another sugestion...
Thanks, so much.
Martônio.
1. Did you copy the object group to the new module or subclassed it?
R- Subclass.
2. Did you compile your form module after doing copy/subclass of the object group?
R- Yes.
3. Did you get any compilation error/warning?
R-No. Because the form close before display.
4. Is the base object group is from a form or a object library?
R-Object Library.
5. Is the base form / object library in which the object group exists is there in the FORMS60_PATH?
R-Yes.
Thanks. So much....
Martônio.
Similar Messages
-
SNAT to single host using object-group service
Hi, I have a single host that I want to static nat a number of services to. I want to use service object groups to simplify commands. I guess the beginnig is:
object-group service OG-SERVICES-INSIDE-MYSERVER
service-object tcp destination eq ftp
service-object tcp-udp destination eq www
service-object tcp destination eq 1723
object network NETWORK_OBJ_INSIDE-MYSERVER
host 192.168.1.100
How would the NAT configuration be?Hi Samuel,
I think object NAT does not allow us to use service object-group.
In order to achieve your requirement we need to create network object per static nat per service.
This is because there can be only one nat statement per network object.
Hope this helps.
Thanks,
Rishabh -
I have an ASA 5510 and have just started using object-groups which are super handy in theory, but not working in reality. I have a service object-group with a mix of tcp, icmp, and udp ports. Let's call it Sample_Port_Group. I'm trying to apply it to my dmz_access_in ACL. Here's the line giving me problems:
access-list dmz_access_in extended permit object-group Sample_Port_Group 192.168.1.1 any
The asa throws up an error between 192.168.1.1 and any. When I put up a ? after Sample_Port_Group, it gives me the option of putting in an IP address, any, etc. When I put in a ? after 192.168.1.1, it only gives me the option of putting in an IP address.
Going off these posts:
- http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a00800d641d.shtml
- http://www.cisco.com/en/US/docs/security/asa/asa81/config/guide/nwaccess.html
Those posts gave me the impression my line was possible, especially the "access-list outsideacl extended permit object-group myaclog interface inside any" line, which is at the end of the 2nd article linked.
What am I doing wrong?
Thanks in advance for any help.Hi Adam!
You are doing it right, you are just missing on little keyword.
The line should be as this:
access-list dmz_access_in extended permit object-group Sample_Port_Group host 192.168.1.1 any
or you could specify the subnetmask as:
access-list dmz_access_in extended permit object-group Sample_Port_Group 192.168.1.1 255.255.255.255 any
Regards -
Access list with multiple object groups
Hello Everyone,
I am using a cisco ASA 5525 with 8.6 code. I am trying to setup access list for oubound access meaning hosts accessing the internet. I have created an access list called outbound_access and did "access-groupc outbound_access in interface inside "
I am trying to use object-groups where ever i can. Here is an example.
object-group service obj_Meraki_outbound
service-object tcp destination eq 443
service-object tcp destination eq 80
service-object tcp destination eq 7734
service-object tcp destination eq 7752
service-object udp destination eq 7351
object-group network obj_Meraki_lan
network-object 10.2.11.0 255.255.255.240
network-object 10.5.11.0 255.255.225.240
object-group network obj_Meraki_pub
des This group lists all hosts associated with Meraki.
network-object host 64.156.192.154
network-object host 64.62.142.12
network-object host 64.62.142.2
network-object host 74.50.51.16
network-object host 74.50.56.218
object-group service obj_Meraki_outbound
service-object tcp destination eq 443
service-object tcp destination eq 80
service-object tcp destination eq 7734
service-object tcp destination eq 7752
service-object udp destination eq 7351
object-group network obj_Meraki_lan
network-object 10.x.x.x 255.255.255.240
network-object 10.x.x.x 255.255.225.240
object-group network obj_Meraki_pub
des This group lists all hosts associated with Meraki.
network-object host 64.156.192.154
network-object host 64.62.142.12
network-object host 64.62.142.2
network-object host 74.50.51.16
network-object host 74.50.56.218
I have tried tying all these groups together in multiple ways but cannot figure out how to do this. This what i think it should be "access-list outbound_access extended permit object-group obj_Meraki_outbound object-group obj_Meraki_lan object-group obj_Meraki_pub"
What i want is the use the service objects and the source network would be obj_Meraki_lan and destination would be obj_Meraki_pub. It seems the rules completely change when you use object groups. Can someone explain this maybe with a few examples. I am already using object groups in many acls but not for every element.
ThanksHi,
Seems to work on my test ASA
Attached it to my current LAN interface.
ASA(config)# packet-tracer input LAN tcp 10.2.11.1 12345 64.156.192.154 80
Phase: 1
Type: ROUTE-LOOKUP
Subtype: input
Result: ALLOW
Config:
Additional Information:
in 0.0.0.0 0.0.0.0 WAN
Phase: 2
Type: ACCESS-LIST
Subtype: log
Result: ALLOW
Config:
access-group outbound_access in interface LAN
access-list outbound_access extended permit object-group obj_Meraki_outbound object-group obj_Meraki_lan object-group obj_Meraki_pub
object-group service obj_Meraki_outbound
service-object tcp destination eq https
service-object tcp destination eq www
service-object tcp destination eq 7734
service-object tcp destination eq 7752
service-object udp destination eq 7351
object-group network obj_Meraki_lan
network-object 10.2.11.0 255.255.255.240
network-object 10.5.11.0 255.255.255.240
object-group network obj_Meraki_pub
description: This group lists all hosts associated with Meraki.
network-object host 64.156.192.154
network-object host 64.62.142.12
network-object host 64.62.142.2
network-object host 74.50.51.16
network-object host 74.50.56.218
Additional Information:
access-list outbound_access line 1 extended permit tcp 10.2.11.0 255.255.255.240 host 64.156.192.154 eq www (hitcnt=1) 0x4d812691
Also have used such configuration in some special cases where the customer has insisted on allow specific TCP/UDP ports between multiple networks. And nothing is stopping from adding ICMP into the "object-group service" also.
- Jouni -
Object Group Vs Object Libraries
Hi ,
I have not used Object Groups and Object Libraries extensively....and am trying to understand them
Having read the form builder help ,I am still not clear with the following.
My questions are as follows
1)When should I be giving preference to Object Group over OBL?
2)Why will i use an Object Group ,when an object group's object is just a pointer to the
object in the form module?
Grouping of similar objects for one single form module only,does'nt provide me much benefits?
3)How will I reference an Object group's object and not a form's object which I have
moved into the object group and vice versa?
4)OBL module has a data block(say emp) as one of its many object,
how can I use this data block in my new forms module(will I be copying this data block
object from the attached OBL to the data block node of the form module in OBJECT navigator?).
will i have to create a Layout manually if I use the data block of OBL or will forms
builder automatically create a layout for this OBL data block.?
5)What are the types of objects which CANNOT be included in OBL and Object groups?
I am aware that I can't include an item of a data block if i don't include the data block itself.
rgds
sHi,
WIP wrote:
Hi ,
I have not used Object Groups and Object Libraries extensively....and am trying to understand them
Having read the form builder help ,I am still not clear with the following.
My questions are as follows
1)When should I be giving preference to Object Group over OBL?Depends on the requirement. The objects in the Object group are limited to the current form module. However, Object libraries can be used across the forms. Of course, you can subclass this object group in other modules.
>
2)Why will i use an Object Group ,when an object group's object is just a pointer to the
object in the form module?Its like a template. You define set of properties (say width, height and font for a text item), and then subclass the object to all the object you create in your form. So, they all will look similar. Also, once after creating the object group, you can add the object group to the object library. This can be very useful.
Grouping of similar objects for one single form module only,does'nt provide me much benefits?
So, here we use Object Library
3)How will I reference an Object group's object and not a form's object which I have
moved into the object group and vice versa?
You cannot reference the individual objects in the object groups.
4)OBL module has a data block(say emp) as one of its many object,
how can I use this data block in my new forms module(will I be copying this data block
object from the attached OBL to the data block node of the form module in OBJECT navigator?).
will i have to create a Layout manually if I use the data block of OBL or will forms
builder automatically create a layout for this OBL data block.?You can add all the Blocks, canvaces, etc to the Object grou, add the object group to the object library. Then, if you just copy/subclass the object group from the Object library, all the blocks, items, canvaces would be created automatically in the target form.
>
5)What are the types of objects which CANNOT be included in OBL and Object groups?
I am aware that I can't include an item of a data block if i don't include the data block itself.
Only the Parent objects can be included in the Object Group (Child objects cannot). However, in the Object Library, you can add the parent as well as child objects. Here, for ex, parent is a data block and child are the items inside the data block
-Arun
>
rgds
s -
Hello Guys,
my question is do below access-lists operate the same way? I am confused about source and destination ports in object-group based acl.
ip access-list extended 101
deny tcp any any eq bgp
deny tcp any eq bgp any
deny tcp any any eq ftp
deny tcp any eq ftp any
service object group services
tcp eq bgp
tcp eq ftp
ip access-list extended 101
deny object-group service any any
Following question is if the purpose is to deny any traffic where source port is bgp (e.g. deny any eq bgp any), how it can be configured using object group service.
Thanks in advance
RegardsHi,
Have you tried configuring it like this
object-group service GATEWAY-SERVICES
service-object tcp eq 88
service-object tcp eq 135
service-object tcp eq 445
service-object tcp eq ldaps
service-object tcp eq 3268
service-object tcp eq 3269
service-object tcp eq 53
service-object udp eq 53
service-object tcp eq 389
service-object udp eq 389
service-object tcp eq 464
service-object udp eq 464
service-object tcp range 49152 65535
service-object udp eq 49152 65535
access-list dmzAccess permit object-group GATEWAY-SERVICES host 172.26.11.10 host 10.16.11.203
I am not sure if it was only after software 8.3+ that the command under the actual "object-group" was of format "service-object tcp source" / "service-object tcp destination" (or the same for UDP)
- Jouni -
Does 4507 support "object-group"
Hi, Need put lot's of ACL in a VLAN, I think if use "object-group" it is much easier for maintainance. What version switch IOS support this feature or not? Thanks.
AFAIK, object-groups are only supported on PIX and other security appliances.
One thing you could do though is, if you have a long access list then you might be able to enhance performance of the switch by enabling Turbo ACL. Take a look at the link below.
http://www.cisco.com/en/US/partner/products/sw/iosswrel/ps1834/products_feature_guide09186a0080080374.html
Pls. rate the post if it helped.
HTH,
Sundar -
Can I use a group of objects as a frame for pictures?
I want to create a frame for photos that looks like the WhatsApp speech bubbles. There you have a rectangle with rounded corners and a little triagle at the left side. If I create a rectangle and a triangle and merge them with the pathfinder, I can insert a picture into this frame so that the picture has rounded corners and the little triangle at the left side. But if I want to insert another photo with another aspect ratio and scale the frame to the new aspect ratio, the little triangle will also be resized. And I want to avoid this. So it would be great to group the rectangle and the triangle and only resize the rectangle to adjust the size of the frame to the size of the second photo and use this group as a frame.
At the moment I have to choose a size for the photo and adjust the rectangle and triangle and merge them with the pathfinder, but I cannot resize the image later, else the little triangle would also be resized.
Is there any possibility to do this? Other solutions would also be great, the main thing is that I can adjust the frame without scaling the little triangle...I think you don't know exactly what I mean. Here is an example image. I want the little triangle to be a part of the frame so it also contains a part of the picture. The selected object in the photo is the inserted image. And as you can see, the triangle does contain a part of the image. If I only insert the picture into the rectangle, the triangle is empty and it looks a bit stange. And if I resize this object, the triangle will also be resized...And my aim is to just adjust the rectangle and nothing more...
-
Overhead calculation not happening after using orgin group.
overhead calculation not happening after using orgin group.
There was a runtime error earlier related to u201Cdefine credit u201C IMG node under costing sheet component and we have applied SAP note 769946 and that error was gone out of the way
We want to apply/add Overhead to SFG/FG materials.
We are using PP order with PCC(product cost collector) as the cost object , i.e costing by period.(system ECC 6)
But our problem is with material standard cost estimate process.
We have assigned overhead keys to the percentage rates in costing sheet for material standard costing and assigned the origin groups to the credits of costing sheet. But after running the cost estimate overhead is not taking into account for standard cost calculation.
In the define credit entry table key field is valid to date strangly and actually system should allow one than one entry with same valid to date and same sec.Cost element(type-41) for different cost centers.
But if we without using overhead key and origin group, the entire cost in that supporting cost center will come to all materials (SFG/FG) and we can not distinguish between different product materials(SFG /FG).
We have checked all things as mentined below.
Firstly that the correct costing sheet is assigned to the valuation
variant.
That the costing sheet is entered for the appropriate material type:
Finished and semi finished or material components.
All of the above can be checked and verified via transaction OKKN.
In addition make sure that the base value maintained is present in the
costing, for example the base may include an Origin group, is that
origin group part of the materials being costed?
Similarly if the base is found and values exist how is the overhead
rate of the costing sheet set up, is it valid etc.
And finally do a similar check for the credit.
we doubt this as a programm error...
So, request all experts to have ur feedback..Dear,
Check your origin group & material unit of mesaurement is same.
some time in costing sheet origin group is maintain in different unit & for materail it's maitain in other unit of mesaurement.
You can see unit of measure for material in Additional data - unit of measure.
Check BOM component material unit also.
Check same unit of measure is maintain in KZS2
I hope above will useful.
GOPAN -
How to create groups in AD using AD group process definition
Hello,
I want to create group in AD when i create group in OIM & i had achieved this using JNDI & was able to create groups in AD
successfully,now i want to create groups in AD using AD Group process definition which contains create AD Group task.
Can anyone suggest what flow should be followed to achieve this ?
Thanks & Regards,
Rahul ShahI think you can do R & D to acheive this via Event Handler.
1. Apply Event Handler on Group Object Form.
In Event handler class.
2. get the parameter from ADITresource.
3. Make JNDI call.
4. Create the same group name in AD.
There may be easy approach.
Which version of OIM you are using?
Thanks,
Kuldeep -
Subclass webutil object group problem
Hi,
I am using 10g form.
I download the webutil demo and got a form called WU_TEST_106 in which there is
a object group called WEBUTIL.
Then I create a new form and drag the object group WEBUTIL of the form
WU_TEST_106 to the object group of the new form and choose 'subclass'.
When I check the content of the WEBUTIL data block in the new form, there
is no items there.
There should be some bean area such as WEBUTIL_FILE_FUNCTIONS and
WEBUTIL_HOST_FUNCTIONS etc.
Anyone can help ?
IvanDo not subclass WEBUTIL from another form. In folder <DevSuiteHome>\forms there should exist file webutil.olb. Open this file directly in Form Builder using
File | Open
and subclass the objects contained within.
Eric Adamson
Lansing, Michigan -
Using Customized group name fields in Live Office
Hello everybody,
I've created a Crystal Reports based on a BEx Query and including a costcenter hierarchy. Now I want to add this report in Excel sheet via Live Office. I did this according to the official HowTos provided by Ingo Hilgefort. Now I've following issue. When I choose the data for the selected fields in Live Office, I could manage to insert the Live Office object into my report but the display of the cost center hierarchy nodes doesn't comply with the display in Crystal Reports. There I've defined a group with a customized group name field (costcenter.medium description) Live Office seems to use only the costcenter node ID.
Crystal Report:
Marketing und Vertrieb----
63 63 63 63 0 0
Vertrieb----
54 54 54 54 0 0
Vertrieb a----
1 1 1 1 0 0
Vertrieb a----
3 3 3 3 0 0
Vertrieb a----
4 4 4 4 0 0
Vertrieb a----
2 2 2 2 0 0
Vertrieb a----
2 2 2 2 0 0
Vertrieb a----
3 3 3 3 0 0
Vertrieb a----
2 2 2 2 0 0
Marketing----
34 34 34 34 0 0
Marketing a----
3 3 3 3 0 0
Live Office:
1000H1.1000H1000.1000H1300----
63 63 63 63 0 0
1000H1.1000H1000.1000H1300.1000H1310----
54 54 54 54 0 0
1000H1.1000H1000.1000H1300.1000H1310.1000/3100-----1 1 1 1 0 0
1000H1.1000H1000.1000H1300.1000H1310.1000/3105-----3 3 3 3 0 0
1000H1.1000H1000.1000H1300.1000H1310.1000/3110-----4 4 4 4 0 0
1000H1.1000H1000.1000H1300.1000H1310.1000/3120-----2 2 2 2 0 0
1000H1.1000H1000.1000H1300.1000H1310.1000/3125-----2 2 2 2 0 0
1000H1.1000H1000.1000H1300.1000H1310.1000/3130-----3 3 3 3 0 0
1000H1.1000H1000.1000H1300.1000H1310.1000/3135-----2 2 2 2 0 0
1000H1.1000H1000.1000H1300.1000H1310.1000/3140-----34 34 34 34 0 0
1000H1.1000H1000.1000H1300.1000H1310.1000/3150-----3 3 3 3 0 0
How can I use customized group name fields in Live Office?
Thank you for helping me on my issue.
Regards,
Florianlive office uses web services to authenticate (dswsbobje) which depends on a java app server for kerberos to be enabled to login with AD. Is Infoview working with AD? This would be required. I'm not sure about your other issues.
Regards,
Tim -
Hello
I have Lync 2013 and 2010 , still i didn't finish my migration completely from 2010 to 2013 .this is coexistence environment that contains both Lync Server 2010 and Lync Server 2013 .
There was no error's in my lync 2013 front end and back end server's and every thing was fine, yesterday I installed windows updated AND CU for my lync 2013 front end and backend server's .
later on after restarting both the front end and the back end server's i start having hundred's of these error's related to "LS Call Park Service".
so any advice for these issue ? and what is the effect for these error .
below is the error I got .
The database being used by Group Pickup is not the appropriate version.
The database is not the correct version:
Connection: Data Source=HQ-LYNC2013-BE.aaaaaaaaaaaaaaaaaaaaaaaaaaa\rtc;Initial Catalog=cpsdyn;Integrated Security=True
Expected... SchemaVersion: 1, SprocVersion: 1, UpgradeVersion: 2
Actual... SchemaVersion: 0, SprocVersion: 0, UpgradeVersion: 0
Cause: The database has not been upgraded.
Resolution:
Upgrade the database to CU1.
==============================================================
There was a problem communicating with the Group Pickup backend database.
There were problems accessing SQL server:
Connection: Data Source=HQ-LYNC2013-BE.aaaaaaaaaaaaaaaaaaaaaaaaaa\rtc;Initial Catalog=cpsdyn;Integrated Security=True
Message: The EXECUTE permission was denied on the object 'DbpGetVersionSchema', database 'cpsdyn', schema 'dbo'.
Error code: -2146232060
Error number: 229
Cause: This may be caused by connectivity issues with the backend database.
Resolution:
Check if SQL backend is running and accepts connections from Group Pickup.
=============================================================================
Kind Regards
MKHello
thanks Holger for u r replay .
due to the Microsoft article about the cu :
I run only :
Install-CsDatabase -ConfiguredDatabases -SqlServerFqdn FEBE.FQDN -Verbose
Note In a coexistence environment that contains both Lync Server 2010 and Lync Server 2013 and in which the Central Management Service is located on a Lync Server 2010 pool, do not run the
Install-CsDatabase -CentralManagementDatabase command. If you later move the Central Management Service to a Lync Server 2013 pool, you have to run the
Install-CsDatabase -CentralManagementDatabase command to apply the changes.
here is what I get on my power shell after i run the command : "WARNING: Warning: Failed to execute batch --"
PS C:\Users\MK> Install-CsDatabase -ConfiguredDatabases -SqlServerFqdn HQ-LYNC2013-BE.MyDomain -Verbose
VERBOSE: Creating new log file
"C:\Users\MK\AppData\Local\Temp\2\Install-CsDatabase-82d6613c-f2e3-47e6-8fc4-8f75d2efe6e4.xml".
VERBOSE: Install databases required by Lync Server role(s).
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.BlobStore'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rtcxds.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.AbsDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rtcab.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RgsConfigDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rgsconfig.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RgsDynDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rgsdyn.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.CpsDynDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database cpsdyn.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.ArchivingDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\arc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database LcsLog.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.MonitoringDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\mon. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database LcsCDR.
VERBOSE: Assigning "BackendStore:BlobStore:LogPath" to F:\CsData
VERBOSE: Assigning "BackendStore:RtcSharedDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "ArchivingStore:ArchivingDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "MonitoringStore:MonitoringDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "MonitoringStore:QoEMetricsDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "ArchivingStore:ArchivingDatabase:DbPath" to F:\CsData
VERBOSE: Assigning "MonitoringStore:MonitoringDatabase:DbPath" to F:\CsData
VERBOSE: Assigning "MonitoringStore:QoEMetricsDatabase:DbPath" to F:\CsData
VERBOSE: Assigning "ABSStore:AbsDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "ApplicationStore:RgsConfigDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "ApplicationStore:RgsDynDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "ApplicationStore:CpsDynDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "BackendStore:BlobStore:DbPath" to F:\CsData
VERBOSE: Assigning "BackendStore:RtcSharedDatabase:DbPath" to F:\CsData
VERBOSE: Assigning "ABSStore:AbsDatabase:DbPath" to F:\CsData
VERBOSE: Assigning "ApplicationStore:RgsConfigDatabase:DbPath" to F:\CsData
VERBOSE: Assigning "ApplicationStore:RgsDynDatabase:DbPath" to F:\CsData
VERBOSE: Assigning "ApplicationStore:CpsDynDatabase:DbPath" to F:\CsData
VERBOSE: Installing "BackendStore" on HQ-LYNC2013-BE.MyDomain\rtc, collocated: False
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.BlobStore'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rtcxds.
Checking state for database rtcxds.
State of database rtcxds is DbState_RequiresMinorUpgrade.
Database rtcxds set to mode Restricted.
Dropping all procedures, functions and views from database rtcxds.
Executing RtcDb.sql...
Adding master role...
Setting owner for database rtcxds to sa.
Creating login MyDomain\RTCHSUniversalServices.
Creating user MyDomain\RTCHSUniversalServices.
Creating Schema MyDomain\RTCHSUniversalServices.
Creating login MyDomain\RTCUniversalReadOnlyAdmins.
Creating user MyDomain\RTCUniversalReadOnlyAdmins.
Creating Schema MyDomain\RTCUniversalReadOnlyAdmins.
Creating login MyDomain\RTCUniversalServerAdmins.
Creating user MyDomain\RTCUniversalServerAdmins.
Creating Schema MyDomain\RTCUniversalServerAdmins.
Adding account MyDomain\RTCHSUniversalServices to role ConsumerRole.
Adding account MyDomain\RTCUniversalReadOnlyAdmins to role ConsumerRole.
Adding account MyDomain\RTCHSUniversalServices to role ReplicatorRole.
Adding account MyDomain\RTCHSUniversalServices to role PublisherRole.
Adding account MyDomain\RTCUniversalServerAdmins to role PublisherRole.
Setting database version: Schema Version 15, Sproc Version 13, Update Version 2.
Setting the database rtcxds to multi user mode.
Database rtcxds is set to multi user mode.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RtcSharedDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rtcshared.
Database created by script "RtcSharedDatabase" already exists and is current.
VERBOSE: Successfully installed the database. For details, see the following log:
"C:\Users\MK\AppData\Local\Temp\2\Create-BackendStore-HQ-LYNC2013-BE.MyDomain_rtc-[2014_11_13][14_35_01].log"
VERBOSE: Installing "ABSStore" on HQ-LYNC2013-BE.MyDomain\rtc, collocated: False
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.AbsDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rtcab.
Checking state for database rtcab.
State of database rtcab is DbState_RequiresMinorUpgrade.
Database rtcab set to mode Restricted.
Dropping all procedures, functions and views from database rtcab.
Executing RtcAbTypes.sql...
WARNING: Warning: Failed to execute batch --
-- Copyright (c) Microsoft Corporation. All rights reserved.
exec sp_addrole N'ServerRole'.
Executing RtcAbDb.sql...
Setting owner for database rtcab to sa.
Creating login MyDomain\RTCComponentUniversalServices.
Creating user MyDomain\RTCComponentUniversalServices.
Creating Schema MyDomain\RTCComponentUniversalServices.
Adding account MyDomain\RTCComponentUniversalServices to role ServerRole.
Setting database version: Schema Version 62, Sproc Version 42, Update Version 3.
Setting the database rtcab to multi user mode.
Database rtcab is set to multi user mode.
VERBOSE: Successfully installed the database. For details, see the following log:
"C:\Users\MK\AppData\Local\Temp\2\Create-ABSStore-HQ-LYNC2013-BE.MyDomain_rtc-[2014_11_13][14_35_20].log"
VERBOSE: Installing "ApplicationStore" on HQ-LYNC2013-BE.MyDomain\rtc, collocated: False
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RgsConfigDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rgsconfig.
Database created by script "RgsConfigDatabase" already exists and is current.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RgsDynDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rgsdyn.
Database created by script "RgsDynDatabase" already exists and is current.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.CpsDynDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database cpsdyn.
Checking state for database cpsdyn.
State of database cpsdyn is DbState_RequiresMinorUpgrade.
Database cpsdyn set to mode Restricted.
Dropping all procedures, functions and views from database cpsdyn.
Executing CpsDyn.sql...
Setting owner for database cpsdyn to sa.
Creating login MyDomain\RTCComponentUniversalServices.
Creating user MyDomain\RTCComponentUniversalServices.
Creating Schema MyDomain\RTCComponentUniversalServices.
Creating login MyDomain\RTCUniversalReadOnlyAdmins.
Creating user MyDomain\RTCUniversalReadOnlyAdmins.
Creating Schema MyDomain\RTCUniversalReadOnlyAdmins.
Creating login MyDomain\RTCUniversalServerAdmins.
Creating user MyDomain\RTCUniversalServerAdmins.
Creating Schema MyDomain\RTCUniversalServerAdmins.
Adding account MyDomain\RTCComponentUniversalServices to role ReadWriteRole.
Adding account MyDomain\RTCUniversalServerAdmins to role ReadWriteRole.
Adding account MyDomain\RTCUniversalReadOnlyAdmins to role ReadOnlyRole.
Setting database version: Schema Version 1, Sproc Version 1, Update Version 2.
Setting the database cpsdyn to multi user mode.
Database cpsdyn is set to multi user mode.
VERBOSE: Successfully installed the database. For details, see the following log:
"C:\Users\MK\AppData\Local\Temp\2\Create-ApplicationStore-HQ-LYNC2013-BE.MyDomain_rtc-[2014_11_13][14_35_37].log"
VERBOSE: Installing "ArchivingStore" on HQ-LYNC2013-BE.MyDomain\arc, collocated: False
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.ArchivingDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\arc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database LcsLog.
Database created by script "ArchivingDatabase" already exists and is current.
VERBOSE: Successfully installed the database. For details, see the following log:
"C:\Users\MK\AppData\Local\Temp\2\Create-ArchivingStore-HQ-LYNC2013-BE.MyDomain_arc-[2014_11_13][14_35_51].log"
VERBOSE: Installing "MonitoringStore" on HQ-LYNC2013-BE.MyDomain\mon, collocated: False
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.MonitoringDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\mon. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database LcsCDR.
Checking state for database LcsCDR.
Checking state for database LcsCDR.
State of database LcsCDR is DbState_RequiresMinorUpgrade.
WARNING: The database LcsCDR being updated has data file path at
\\HQ-LYNC2013-BE.MyDomain\C$\CsData\MonitoringStore\mon\DbPath\LcsCDR.mdf and supplied data file path is
\\HQ-LYNC2013-BE.MyDomain\F$\CsData\MonitoringStore\mon\DbPath\LcsCDR.mdf. Supplied path will be ignored.
WARNING: The database LcsCDR being updated has log file path at
\\HQ-LYNC2013-BE.MyDomain\C$\CsData\MonitoringStore\mon\LogPath\LcsCDR.ldf and supplied data file path is
\\HQ-LYNC2013-BE.MyDomain\F$\CsData\MonitoringStore\mon\LogPath\LcsCDR.ldf. Supplied path will be ignored.
Database LcsCDR set to mode Restricted.
Dropping all procedures, functions and views from database LcsCDR.
Executing CdrDb.sql...
Setting owner for database LcsCDR to sa.
Creating login MyDomain\CSAdministrator.
Creating user MyDomain\CSAdministrator.
Creating Schema MyDomain\CSAdministrator.
Creating login MyDomain\RTCComponentUniversalServices.
Creating user MyDomain\RTCComponentUniversalServices.
Creating Schema MyDomain\RTCComponentUniversalServices.
Adding account MyDomain\RTCComponentUniversalServices to role ServerRole.
Adding account MyDomain\RTCComponentUniversalServices to role ReportsReadOnlyRole.
Adding account MyDomain\CSAdministrator to role ReportsReadOnlyRole.
Setting database version: Schema Version 39, Sproc Version 82, Update Version 2.
Setting the database LcsCDR to multi user mode.
Database LcsCDR is set to multi user mode.
SQL Server Agent is running and its start mode was detected as Auto.
Executing CdrJobs.sql...
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.QoEMetricsDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\mon. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database QoEMetrics.
Checking state for database QoEMetrics.
Checking state for database QoEMetrics.
State of database QoEMetrics is DbState_RequiresMinorUpgrade.
WARNING: The database QoEMetrics being updated has data file path at
\\HQ-LYNC2013-BE.MyDomain\C$\CsData\MonitoringStore\mon\DbPath\QoEMetrics.mdf and supplied data file path is
\\HQ-LYNC2013-BE.MyDomain\F$\CsData\MonitoringStore\mon\DbPath\QoEMetrics.mdf. Supplied path will be ignored.
WARNING: The database QoEMetrics being updated has log file path at
\\HQ-LYNC2013-BE.MyDomain\C$\CsData\MonitoringStore\mon\LogPath\QoEMetrics.ldf and supplied data file path is
\\HQ-LYNC2013-BE.MyDomain\F$\CsData\MonitoringStore\mon\LogPath\QoEMetrics.ldf. Supplied path will be ignored.
Database QoEMetrics set to mode Restricted.
Dropping all procedures, functions and views from database QoEMetrics.
Executing QoEDb.sql...
Setting owner for database QoEMetrics to sa.
Creating login MyDomain\RTCComponentUniversalServices.
Creating user MyDomain\RTCComponentUniversalServices.
Creating Schema MyDomain\RTCComponentUniversalServices.
Adding account MyDomain\RTCComponentUniversalServices to role ServerRole.
Setting database version: Schema Version 62, Sproc Version 90, Update Version 1.
Setting the database QoEMetrics to multi user mode.
Database QoEMetrics is set to multi user mode.
SQL Server Agent is running and its start mode was detected as Auto.
Executing QoEJobs.sql...
VERBOSE: Successfully installed the database. For details, see the following log:
"C:\Users\MK\AppData\Local\Temp\2\Create-MonitoringStore-HQ-LYNC2013-BE.MyDomain_mon-[2014_11_13][14_35_51].log"
VERBOSE: No changes were made to the Central Management Store.
VERBOSE: Creating new log file
"C:\Users\MK\AppData\Local\Temp\2\Install-CsDatabase-82d6613c-f2e3-47e6-8fc4-8f75d2efe6e4.html".
WARNING: "Install-CsDatabase" processing has completed with warnings. "5" warnings were recorded during this run.
WARNING: Detailed results can be found at
"C:\Users\MK\AppData\Local\Temp\2\Install-CsDatabase-82d6613c-f2e3-47e6-8fc4-8f75d2efe6e4.html".
PS C:\Users\MK>
I hope some one can confirm no issue with what I did ??
Kind Regards
MK -
ORA-23326: object group "PUBLIC","REPG" is quiesced
I am using Oracle 9i Enterprise Manager.
I have two servers with databases isb.city and rwp.rawat. I completed the whole process of Multimaster Replication. I am working on the SCOTT schema as test. Right now I am working on LAN.
Two servers are connected with each other. I am facing two problems:
1) When I try following command, it shows no rows on both servers:
SQL>SELECT DBLINK FROM DBA_REPSITES WHERE GNAME = 'repg';
no rows selected
2) When I try to insert data in the tables, it doesn't allow it and give following:
ORA-23326: object group "PUBLIC","REPG" is quiesced
I already made changes in init.ora and changed spfile file as well accordingly.
What is wrong with my setup?Try this:
1. SELECT DBLINK FROM DBA_REPSITES WHERE GNAME = 'REPG';
2. You should change init.ora or spfile (database is using one of them):
show parameter pfile will show you if you are using spfile or not
execute RESUME_MASTER_ACTIVITY to unquisce replication group
Best Regards
Krystian Zieja / mob -
Hi,
We are using PI 7.1. We have defined a step group (with transformation, send and receiver steps) into a SWC. In another SWC we have a ccBPM where we want to use the step group. Both SWCs are associated.
When we insert the step group into the ccBPM and we set up the steps for the step group, these changes are not saved!!!
We have disabled the flag "cannot be changed", but the changes are not kept and therefore we cannot active the ccBPM.
What is the problem?
Thanks in advance,
Samantha.Hi all,
We copied the step group to the current SWC. Once this done, we have tried two things:
1. Using objects from the other SWC (Service Interfaces) to set up the transformation steps. These changes are not kept.
2. We have created new objects into the current SWC (Operation Mappings and Service Interfaces) to set up the transformation steps. That is to say, into the SWC we have created from scratch all objects that we need to configure our steps. However, when we modify the steps, the changes are not kept either.
If it is necessary to create all objects again into the new SWC, then the step groups are not too useful...
Any another idea?
Regards,
Samantha.
Maybe you are looking for
-
I tried to update to the latest software for the iPhone 4 today, May 16th. After removing the software, I received an error message from iTunes and now my phone has no software and useless for everything including a phone call. I immediately went to
-
Itunes has stopped working 10.4.80 attempting to sync iPhone 3GS
Version s/b 10.4.0.80 Repaired iTunes (64bit) Cycled phone. Crash occurs during sync.
-
Wrongly posted in iPhoto forum, should probably be posted here instead. I want to remove the message that pops up every time i connect my IPhone that says: "Photos in the Camera Roll of "Name" cannot be imported because the device is locked with a pa
-
Hello: I need to show on the stage the video from my HD webcam in a local PC and save the video into a file. Do you know a way to record the video and save it to mpg or mov, flv, mp4 video file? any Xtras, ActiveX or other ways? Thank you very much
-
Producing Finished Good product by using two different activity alternatively in OPM
1) Suppose I am producing one material FG1 with Raw material RM1 and RM2. So basically there are two activities involved in this. One is grinding and another is mixing. Now to perform grinding activity, I am using resource1 of capacity of 10 KG at on