Using one plug in for several channels - How to?

Is there a way to use for example one reverb setting for a selected group of tracks or all of the tracks globally? I'd also like to do a fade out for the entire song but am not sure how to do all the tracks at once?

Actually, there are 2 kinds of effects. Ones inserted in the channel I think called "serial", and ones called "Parallel", which normally benefit from being on the Bus. Each is always best used in their intended manner. EQ and Compression also Gating are examples of Insert "serial" effects. They generally NEED to be inserted into the channel because they affect the entire signal, thereby changing the character of the whole signal. Inserting into a channel sends the entire signal through the effect and a purely affected signal comes out after the insert. The compressor controls dynamics, so the whole signal must be affected for this to work. If you compress at the bus, you still have your dynamic peaks coming from the direct signal and you are only compressing the portion of the signal being fed through the bus. Eqing is the same. Say you have a muddy sound and want to clear out some 250hz. Inserting the EQ into the channel will run the signal through the EQ, where you have your cleaner, less muddy sound coming out. If you ran the EQ through the bus, you would probably percieve no audible difference as the frequencies you are cutting, still remain at your original signal. The exception would be if you were to mute the channel outputs and only monitor the bus returns, then that might work, but Compressing multiple signals will not get the best out of the device. Each instrument will benefit from its own kind of settings and in the bus in this scenario, you are either compressing all or nothing. Wah, and Distortion also are far more effective when the whole signal is affected.On the other hand,Parallel processing happens when you "borrow" some of the dry, unaffected signal and send it to an effect, and the bus returns the affected signal, running parallel to your original un affected signal on a complete separate channel. Reverb is the best example of this kind of effect. Delay works very well this way too. You have a sonic advantage to leave the original dry signal unaffected (though perhaps compressed and Eqed), because from the return of the bus, you are "adding" some effect to taste, without altering your original signal. This gives a much bigger sound because for instance, with a single mono vocal track, you now have that single mono track, plus you have the effect filling in on the stereo sides. You can place the mono (or any dry) signal wherever you want in the mix, and with the bus fader, add effects in stereo to taste. It is just delightful.

Similar Messages

  • Using one packing instruction for several materials

    Dear Friends,
    I need some inputs on how to use one packing instruction for several materials.
    The scenarion here is :
    Many materials are packed in a similar way. If certain materials differ in only one characteristic (for example, construction), having to maintain a packing instruction for each of them results in a considerable time and efforts.
    Need some valuable inputs to complete this requirement.
    Regards,
    Harsh

    Hi.
    Try with reference material for packing (MARA-RMATP). Same material number must be entered on all materials which are packed through same packing instructions.
    Then you have to create/use access sequence for determination of packing instructions that contains that characteristic (RMATP).
    Best regards
    Milan

  • HT204053 The entire family has used one itunes account for years. How do we all set up separate iCloud accounts now?

    The entire family has used one itunes account for years. How do we all set up separate iCloud accounts now? Or should we? 5 macbooks, 2 ipads, 4 iphones, 2 itouch, 2 imacs.   How does one decide what to sync, share and what not to? Green Jeans.

    You need to start by understanding the distinction between iTunes and iCloud - Apple confuse the issue by referring to 'iTunes Match' as part of iCloud. It isn't.
    You don't have to have the same login (Apple ID) for iTunes and iCloud; many people don't and there's no problem about it.
    Your iCloud ID gets you email, calendars, contacts, iWork documents and PhotoStream syncing between devices.
    Your iTunes ID gets you the iTunes Store, the App Store for iOS, the Mac App Store for OSX,, 'iTunes in the Cloud' (downloading of purchased items to any logged-in device) and 'iTunes Match' (uploading of songs not purchased in the iTunes Store).
    Your family members can easily each get their own iCloud account to keep email etc. separate - in each case they will need a different non-Apple email address (a free one from Yahoo etc. would do) to set up the ID. If they are sharing a Mac they need to be using a separate user account.
    They can have their own iCloud accounts and still all sign into the same iTunes account: or they can open their own iTunes accounts using their new iCloud Apple IDs.
    BUT they cannot transfer items purchased under the present iTunes ID to different iTunes IDs.

  • How do I use one iTunes library for several user accounts?

    This is definitely a question!
    I have several user accounts for my osx. One I use at home, one at work etc.
    What I never have been able ta manage is a way to use the same iTunes library (the same music files) for the different accounts.
    When a new user profile is created, everything in it is set to scratch.
    I have tried all kinds of tricks:
    - Direct iTunes to look for It's library on the other users folder (wich doesn't really work, cus even if you are Admin you don't have access to other users folders through another user).
    - Creat an alias for the other library-folder and refere to it.
    etc. etc. You name it...
    Anyone?

    Hi,
    This will help you - http://docs.info.apple.com/article.html?artnum=93195
    Regards

  • HT204053 i want to use one apple ID for multiple devices. how will i be able to load the apps on all devices?

    I am trying to set up 7 new ipads with the same apple ID. How will i be able to pay for the apps once and identify that the other devices should load them too?
    Lindsey

    If they are using the same apple ID, then you don't need to worry. You can install apps on as many devices you want.

  • Use one graph palette for several graphs

    I'm displaying information on two different graphs. But these two graphs must be coordinated : when I modify the zoom on one graph, the other graph plots its own data in the same interval of time than the first graph.
    Is it possible to use only the graph palette of the first graph to control the zoom, cursors, etc... on both graphs?
    Thank you.

    Hello zyl7,
    yes that's possible: just use property nodes to read properties from first graph and write those values to property node of second graph!
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • How to do averaging N samples for several channels?

    Dear members,
    I got the Routine for averaging N Samples from One channel's data from the forum. I would like to
    do for several channels. How to go about it?
    Regards,
    G.Kousalya

    You can do it in a way that is very similar to the approach you would use for a single value (see attachment).
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps
    Attachments:
    example.vi ‏38 KB

  • How to use one email adress for multiple recipients

    Hello,
    I'd like to know how to use one email adress for multiple recipients. 
    this would be very useful or projects. for example;
    if i send one mail to [email protected], all people in this project get an email.
    I will add the people in this project myself. 
    I know it is possible, but I don't know how to do it ;-)
    please help me! 

    Hope this help.
    _http://technet.microsoft.com/en-us/library/cc164331(v=exchg.65) .aspx

  • How do you use one apple id for iPad and iphone

    We have an iPad, four iphone 3gs and a new iphone4.  We use one apple Id for each with iCloud.  Do we need a new apple Id for the 4gs?  Also how do we share the iPad between the iPhones for music & apps.   Thanks.

    To allow you to Message one another and FaceTimne one another see:
    MacMost Now 653: Setting Up Multiple iOS Devices For Messages and FaceTime

  • HT204053 Our family uses one Apple ID for all of our iPhones.  We installed the update and now we are all getting each others photos and texts.  How do we stop this?

    Our family uses one Apple ID for all of our iPhone 5's.  We installed the update and now we are all receiving each other's pictures and texts.  How do we stop this? 

    Have a look here...
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l

  • HT1660 how can I use one single library for all users on the same laptop?

    how can I use one single library for all users on the same laptop?

    You are most of the way there. Each user having access to hard drive is the key. If users are limited in file privileges this is harder.
    Any files you add to your library and any files she adds to her library are available to the other. Just not automatically. Each user must add the files to their own library using the add file or add folder option from menu bar.
    What I have done is set library location to a location outside of My Documents\My Music. On my network storage I have a folder names s:\itunes. Both accounts iTunes are set to use this location for the library.

  • I have an old Ipad and an IPad Air. I used one Apple ID for both IPads. Now I wish ti split the iCloud storage and separate the two. I want to change my new IPad Air to a New Apple ID. How do I do it?

    I have an old Ipad and an IPad Air. I used one Apple ID for both IPads. Now I wish to split the iCloud storage and separate the two. I want to change my new IPad Air to a New Apple ID. How do I do it?

    Go to Settings > iCloud > Delete Account, and enter your Apple ID password. Then sign in with the new ID.
    NOTE: "Delete Account" just means it will be deleted from the iPad. The account itself will not be deleted.

  • How to use one Apple ID for mac book and iPhone

    I am to buy a mac book pro and also I already have a iPhone 5. Can I use one Apple ID for both them?

    Thank you

  • HT5622 I have been using one apple ID for my family as it makes it easier to manage itunes purchases/rentals on all of our devices.  Now that my kids are getting old and my wife has recently purchased an Iphone, I can see that I need to change my strategy

    I have been using one apple ID for my family as it makes it easier to manage itunes purchases/rentals on all of our devices.  Now that my kids are getting old and my wife has recently purchased an Iphone, I can see that I need to change my strategy. I plan to add a few more iphones to the family very soon.  What is your recommendation to manage all of our devices (iphones, itouch, apple tv) for my family?  Can I continue to function with one apple ID or is it time to take the leep into attempting to manage multi-apple ID's? 

    There's a few ways of managing multiple devices on a single computer (and keeping seperate content on each). The following document is worth checking through:
    How to use multiple iPods, iPads, or iPhones with one computer

  • Can I use one iCloud account for two phones without sharing contacts

    Can I use one iCloud account for two phones without sharing contacts

    If so how do I unmerge the two phones?

Maybe you are looking for

  • Dreamweaver adding local testing server MySQL-HELP REQUEST

    I have a website on register.com and I am using MySQL for the first time. My DB and table have been created using MyPHPAdmin. Now I want to use my Dreamweaver to setup a testing server that will be local and then upload asp pages after testing. Can A

  • Unable to use the same ID for ipad and iphone

    When I enter Apple  ID and password to install application on Iphone, It is notified that " your password was entered incorrectly", eventhough those ID and password work normally on Ipad. What is the possible problem ?

  • Changing what applications are used to open different file types

    hello all... it seems i am going to be in here quite a lot when getting used to my new mac lol but anyway i have a file type i want vlc player to always use .mp4 and some other file types.. so my problem is when i have these files and i press open wi

  • Range interval partitioning with null value

    Hello, I have question, how can I create table with partition and after that I will insert null value in the partition key like this kind of range interval partitioning with null value. I have Oracle 11g. Thanks Mohammed

  • SAP TAO testing on SAP CRM 7.0

    Hi Experts, Has any one done automation testing by using SAP TAO on CRM 7.0?, Is SAP TAO supports Portal/WEBUI? Thanks in Advance Regards, Bharat