Using Oracle after install without Admin rights -- Possible?

We are upgrading our company to Windows 7. Clearly, the best practice is to remove admin rights from users. I see lots of posts on inability to install Oracle without admin rights. That makes sense. Once installed though, we are hitting errors simply running Oracle without admin rights. Is there a change in our install methodology that would allow us to run Oracle without Admin rights? Any thoughts would be appreciated. We are having to run wide open right now.
Thanks,
Dave

974992 wrote:
We are upgrading our company to Windows 7. Clearly, the best practice is to remove admin rights from users. I see lots of posts on inability to install Oracle without admin rights. That makes sense. Once installed though, we are hitting errors simply running Oracle without admin rights. Is there a change in our install methodology that would allow us to run Oracle without Admin rights? Any thoughts would be appreciated. We are having to run wide open right now.
Thanks,
Davemaybe a bit more detail. It sounds like you are talking about end-user machines, in which case I would only expect the oracle client software to be installed. What exact errors are you getting?

Similar Messages

  • ZEN Agent install without admin rights

    Hi all,
    Sorry to re-visit something I've seen a number of posts on, but I can't
    seem to get things to work as I've been lead to believe they should. We
    have a handful of systems that do not have any instance of the ZEN agent
    installed, a mix of NT and XP (odd, I know). We are attempting to create
    an automated process that will establish whether the agent is on the
    system and if it is not, install it. Seems pretty straight forward and
    I've been referencing the following suggestions. There are a number of
    posts in the forums as well, but these were the most relevant.
    http://www.novell.com/coolsolutions/trench/3490.html
    http://support.novell.com/cgi-bin/se...?/10085696.htm
    http://www.novell.com/coolsolutions/trench/3383.html
    http://support.novell.com/cgi-bin/se...?/10073212.htm
    The problem is, despite what these instructions say, we cannot install the
    agent without having local admin rights. All the batch files are in
    place, and work, but ultimately the install fails. I've seen work arounds
    for any OS later than NT, but its important that every system have the
    agent.
    I've tried almost everything suggested in the links above but I am
    primarily pursuing the batch file approach as detailed in...
    http://support.novell.com/cgi-bin/se...?/10085696.htm
    At what point are rights elevated such that the install can complete in an
    NT environment?
    I am sure I'm forgetting some relevant details, so humor me please.
    Thanks in advance.
    Mike

    I forgot that RunAs does not come with NT. ( It's available as an add-on,
    but even that needs admin rights to install.)
    Try PSExec from http://www.sysinternals.com, but I believe that will not
    work either, but worth a shot.
    Another outside shot is to push the "AlwaysInstallElevated" MSI installer
    registry keys via a batch file.
    Unfortunately, I doubt your logged on user has the rights to do this
    either..............
    You may be stuck manually visiting and installing manually.
    Craig Wilson
    Novell Product Support Forum Sysop
    Master CNE, MCSE 2003, CCNA
    Editor - http://www.ithowto.com
    (Seeking Full-Time Expert? Drop me a note :> )
    <[email protected]> wrote in message
    news:[email protected]...
    > There's no domain to work with. The only admin account available is on
    > the local PC. I've seen options using Runas or even CPAU.exe but neither
    > are available with Windows NT.
    >
    > We are copying the relevant files to a directory on the PC before
    > beginning the install. To this point, network access has not been an
    > issue.
    >
    > The batch file dictates the install run in the background so I don't see
    > it happening, but the problem seems to come down to not having
    > administrative rights on the PC. If I launch the .MSI manually it gives
    > me an error referencing rights. If I'm logged on as an administrator the
    > install completes exactly as it should.
    >
    > Thanks for the reply. I look forward to any suggestions you may have.
    >
    >
    >> There are lots of scripts, but you need to have some ID that is a local
    >> admin. ( If the PC is on a Domain, then a Domain Admin account works
    >> great.)
    >> Additionally, network access may be lost when running this script, so
    >> copying the agent local before the install may help.
    >>
    >> Where do you hit a snag? Starting the install as the alernate user?
    >> Finding an Admin account? Determining if the agent is installed?
    >>
    >> --
    >> Craig Wilson
    >> Novell Product Support Forum Sysop
    >> Master CNE, MCSE 2003, CCNA
    >>
    >> Editor - http://www.ithowto.com
    >>
    >> (Seeking Full-Time Expert? Drop me a note :> )
    >>
    >>
    >> <[email protected]> wrote in message
    >> news:[email protected]...
    >> > Hi all,
    >> >
    >> > Sorry to re-visit something I've seen a number of posts on, but I can't
    >> > seem to get things to work as I've been lead to believe they should.
    > We
    >> > have a handful of systems that do not have any instance of the ZEN
    > agent
    >> > installed, a mix of NT and XP (odd, I know). We are attempting to
    > create
    >> > an automated process that will establish whether the agent is on the
    >> > system and if it is not, install it. Seems pretty straight forward and
    >> > I've been referencing the following suggestions. There are a number of
    >> > posts in the forums as well, but these were the most relevant.
    >> >
    >> > http://www.novell.com/coolsolutions/trench/3490.html
    >> > http://support.novell.com/cgi-bin/se...?/10085696.htm
    >> > http://www.novell.com/coolsolutions/trench/3383.html
    >> > http://support.novell.com/cgi-bin/se...?/10073212.htm
    >> >
    >> > The problem is, despite what these instructions say, we cannot install
    > the
    >> > agent without having local admin rights. All the batch files are in
    >> > place, and work, but ultimately the install fails. I've seen work
    > arounds
    >> > for any OS later than NT, but its important that every system have the
    >> > agent.
    >> >
    >> > I've tried almost everything suggested in the links above but I am
    >> > primarily pursuing the batch file approach as detailed in...
    >> > http://support.novell.com/cgi-bin/se...?/10085696.htm
    >> >
    >> > At what point are rights elevated such that the install can complete
    > in an
    >> > NT environment?
    >> >
    >> > I am sure I'm forgetting some relevant details, so humor me please.
    >> > Thanks in advance.
    >> >
    >> > Mike
    >>
    >>
    >

  • Installing without admin rights on Win7

    I am trying to get a definitive answer to whether Adobe Creative Cloud can be installed and used by someone who does not have administrator rights to their Windows 7 PC. In our company, we restrict user rights and users cannot "elevate" their rights to install software. Normally, we package ALL software and deploy it by Microsoft SCCM, which overcomes any admin problems automatically. We could presumably do that to install the initial cloud download manager application. But it is not clear whether that will then be able to install the specific applications the user requires when logged in using their (user mode) account. Does the creative cloud installer run as a background service - that could be set to run with an administrator service account? Can one user with access to the cloud downloa da traditional installer package which could then e passed to SCCM for deployment to other colleagues? Is there any official suggestion from Adobe how companies that enforce lock-down of user rights can use the Cloud?
    Thanks!
    Anthony

    Hi Anthony,
    I know that installation at least requires admin rights and most likely first launch with some of the apps. I believe its possible to run most of the apps from a limited user once installed. This is true for all Adobe products not just Cloud products. I believe we are working on options for deployment for Creative Cloud Team which would support technologies such as SCCM, so even if this option is not available for cloud currently, it may be something that is available in the future.
    -Dave

  • How to Install AIR appliaction Without Admin Rights

    Hi All,
    Is it possible to install AIR application without admin rights, because many of our user don't have Admin login. I should make the
    AIR application to install in all user login. is it possible?
    can anyone know how to do this? please post your suggestions and solutions.
    Thanks in advance,
    Vasanth

    On Mac OS, to install or update an AIR application, the user needs to have adequate system privileges to install to the application directory (and administrative privileges if the application needs to update the runtime). On Windows, a user needs to have administrative privileges.
    IT administrators can install AIR applications silently using standard desktop deployment tools. For more information, see "Enterprise deployment" in the following page:
    http://help.adobe.com/en_US/AIR/1.5/air_admin/WS5b3ccc516d4fbf351e63e3d11c0f5986ec-8000.ht ml#WS5b3ccc516d4fbf351e63e3d11c0f59823a-7fee

  • How do I use the maintenance service to upgrade PCs without admin rights?

    Our users do not have admin rights on their systems so FireFox is WAY out of date. I read about the Maintenance Service in the wiki and hoped it might allow FireFox to update itself without admin rights. I installed v21 and FireFox does not update itself so I am not sure what to make of things. In fact, it does not even seem to try since click in on Help, About shows "Updates available at http://www.firefox.com"
    I have seen some postings indicating others have experienced similar issues with not being able to update as "users", but no solution. I really do NOT want to require our folks use Chrome, which works without any users given its design. Suggestions?

    The maintenance service can only be installed by someone that has administrator permissions (you get an UAC alert), so you can only use this service for updating in the background if someone with administrator permissions has installed this service (maintenanceservice_installer.exe).
    *https://wiki.mozilla.org/Windows_Service_Silent_Update
    *https://wiki.mozilla.org/Background_Updates

  • Is there any way to install a plugin without admin rights on windows 7

    Hi all,
    I've developed a plugin for adobe indesign cs5. I was able to install my plugin(by creating .msi file) into indesign plugins folder, when extension manager is opened as administrator.
    I just want to know, if I can install the plugin without admin rights.
    FYI: My plugin will add a link to File menu on menubar of the indesign application, clicking which will execute the scripts.
    Please let me know if you want any other information.
    Thanks for any ideas/support.
    Regards,
    Srikanth

    InDesign will load plugins from the path specified in the PlugInConfig.txt file in the user's InDesign preferences directory, which does not require administrative privileges. See "Using PlugInConfig.txt" on pp.12- of the "Getting Started with the Adobe InDesign CS5 Products SDK" (getting-started.pdf) in the SDK. Specifically:
    Using PlugInConfig.txt
    1. If InDesign is running, exit it.
    2. Create a text file named “PlugInConfig.txt” in the InDesign preference directory, and enter
    the following text into it:
    =Path
    NOTE: The inDesign preference folder is located in the following directory (where <locale> is a
    locale-specific subdirectory; for example, en_US for English):
    Windows XP: C:\Documents and Settings\<user>\Application Data\
    Adobe\InDesign\Version #.#\<locale>
    Windows Vista: C:\Users\<user>\AppData\Roaming\
    Adobe\InDesign\Version #.#\<locale>
    Mac OS: <user-home>/Library/Preferences/
    Adobe InDesign/Version #.#/<locale>
    3. Open the PlugInConfig.txt file in a text editor and edit the sections as desired. For example,
    the following tells InDesign to load every plug-in in the sdk folder:
    =Path
    "C:\Adobe InDesign CS5 Products SDK\build\win\debug\sdk
    NOTE: The preceding example is only for Windows. On Mac OS, use ‘:’ as the path separator.
    NOTE: You also can use a “=Exclude” tag to exclude a certain plug-in from being loaded. This
    is useful if you do not want to load everything in the “=Path” folder.
    NOTE: This is target specific. You cannot launch the release version of InDeisgn with debug
    plug-ins. It is convenient to add both debug and release paths, commenting out the  target that is not in use. For single-line comments, use “;” (semicolon).
    4. Save the PlugInConfig.txt file.
    5. Restart InDesign.
    6. Verify the set of plug-ins loaded by selecting the About Plug-ins menu.

  • Can I install LV runtime without admin rights?

    I want to install LV runtime without admin rights.  Is there any workaround that will allow me to do this?
    J

    JustinJames wrote:
    Does anyone know of a hacky way to do this?  I have ABSOLUTELY no way to get admin rights.
    J
    Not that Windows security is the greatest but generally these types of things are not easy to bypass. They are security related afterall. I think you will need to contact you IT department about installing the runtime engine for you.
    Mark Yedinak
    "Does anyone know where the love of God goes when the waves turn the minutes to hours?"
    Wreck of the Edmund Fitzgerald - Gordon Lightfoot

  • Installing iTunes updates without admin rights

    I'm the sys admin for a small IT department. None of the users have admin rights, which means every time an iTunes update comes around, they can't install it.
    How can I make this easier for us all, without having to go around to all their machines to install for them, and without giving them admin rights?

    +"None of the users have admin rights, which means every time an iTunes update comes around, they can't install it."+
    Users without admin rights cannot install their own programs, iTunes or otherwise.
    Note that you do not need to install every single iTunes update that comes along. Just upgrade once in while. (I am on 7.6, and doing fine.) The newer versions don't support anything new that your folks are supposed to be doing at work anyway. (-:

  • Installing JInitiator without admin rights fails

    Dear experts!
    We have an application server (10.1.0.2) with a web form application onto it. On the client side there are about 50 users. Some of them have and some don't have admin rights.
    When calling the forms application the first time JInitiator is downloaded and installed onto the local pc. This works well for the admin users but fails without admin rights.
    So what is the recommended way in this case? Is there a workaround for non admin users?
    Thanks
    Markus

    Can you expand on this 4dyomi ? You mentioned Novell Zenworks ? What if
    your application is a Web application and users are not part of the intranet.
    Pure web-based users.

  • Creation of a normal user without admin rights

    Hi,
    I am new to oracle apex. Can you please let me know how to create a normal user without admin rights in oracle apex application.
    Thanks & Regards,
    venkat
    Edited by: 866673 on Jun 17, 2011 9:53 AM

    Welcome to the forum: please read the FAQ and forum sticky threads (if you haven't done so already), and ensure you have updated with your profile with a real handle instead of "866673".
    You'll get a faster, more effective response to your questions by including as much relevant information as possible upfront. This should usually include:
    <li>Full APEX version
    <li>Full DB version and edition
    <li>Web server architecture (EPG, OHS or APEX listener)
    <li>Browser(s)/version(s) used
    <li>Theme
    <li>Templates
    <li>Region type
    (although for your question only the APEX version is necessary).
    Assuming you mean a user who can authenticate to an application that uses Application Express Account Credentials?
    In APEX 4.0:
    1. Go to Home > Application Builder > [Your Application ] > Administration > Create Users and Groups > Create User
    2. Enter the User Identification information.
    3. In the Account Privileges, specify:
    User is a workspace administrator: No
    User is a developer: No
    4. Complete the rest of the form as necessary.

  • Saving Adobe PDF Page Size without Admin Rights?

    Ok to get started, to define the limits of my environment for replication:
    I'm using Windows XP SP3 and have tried Adobe Acrobat 8, 9, and X, my computer is on a network at work, and my user rights are limited.
    Open Printing Preferences, Click Add...
    The "Add Custom Paper Size" window appears, give a new name and define sizes of the paper.
    Lets say I'm printing to a large format say 36" Tall by 108" Long (3ft x 9ft)
    Click Add/Modify, the window goes away, focus again on Adobe PDF Printing Preferences. Click the drop down box for Adobe PDF Page Size:
    The page size I just added to the list is not there!
    The solution to the this problem is to have Administrative Rights to your machine in order to add custom paper sizes.
    Note to Adobe Acrobat Programmers/Designers: please redevelop this feature to allow users to add paper sizes without Power User or Admin Rights. In a secure network these rights are not easily given out to every Dick and Jane that uses your software.

    Interesting post, and for once, something one should be able
    to work with.
    I have a similar problem:
    We're using a software distribution tool to install
    msi-packages via rpc. Trying to distribute the latest flashplayer
    works fine, but the users can't open flash-files, whether with
    firefox nor internetexplorer tried 6 and 7 with latest patches.
    I've found two possible ways to install a flashplayer plugin,
    but both require manual input, which is just not possible for
    >100 Clients. just to mention: clean registry and then install
    with admin rights or just run the installer with admin rights from
    the local machine.
    Another problem is, that our company security policy
    prohibits from using admin-rights for most installations.
    is there any workaround?
    regards
    Matthias Hilpert
    ps: /sticky or at least a FAQ :-)

  • Run VHD/VMCX without admin rights?

    Hi,
    Is it possible to run Windows Virtual PC without Admin rights?
    My goal is to have basic users running a Windows XP VHD. I can install the application and set everything up using my admin credentials, but I want to leave the other users as basic or power users. 
    I've added the users to the power users group and given that group all rights to both the VHD and VMC files. The error the users get is that VPC cant write changes to the VHD. 
    To add, I'll need to use the integrated features as well. So even if there is a work around for the admin issue, I still need to ensure integrated features works too. 
    Can this be done?
    Thanks, 
    Jason

    Still curious if this is possible.
    Thanks for any help!

  • Can I using Oracle Password filter without using DIP?

    Hi expert,
    Can I using Oracle Password filter without using DIP?
    I installed OID 1.1.1.5.0 and AD MS 2008 + Password Filter without other configuration about DIP.
    While Install password filter, I use 'sAMAccountName' as Source Attribute (Microsoft Active Directory) and 'orclSAMAccountName' as Target Attribute (Oracle Internet Directory) instead of using objectGUID.
    My Scenario test
    1. setup password filter follow by 20 Deploying the Oracle Password Filter for Microsoft Active Directory
    2. create user in AD
    3. create user in OID
    4. reset password in AD
    I found that it can't send password from AD to OID.
    See log below
    OID Base DN is ---->
    dc=ksso,dc=com
    About to retrive connection
    Got the Connection
    Inside Add Parent
    About to add node
    Node Added
    retval is NOT success
    Out of Add Parent
    Domain String -->
    KSSO.LOCAL
    User Domain String -->
    [email protected]
    Inside OID Search User sgslodac
    About to fire the search request
    TEST BASE -->
    dc=ksso,dc=com
    Password Update Failed. No record to update
    Search did not reterive any data
    Writing data into persistence store
    INSIDE IF PERSISTENT STORE
    Inside sgsladds::sgslperwriteData YOOOO
    Inside sgsladac c-tor
    AD Host
    10.20.5.60
    AD Port
    389
    AD Base DN
    DC=KSSO,DC=LOCAL
    Only dataattribute
    Got Registry enteries
    contact
    description
    Got Entiredn
    OU=orclpwfKSSO.LOCAL,DC=KSSO,DC=LOCAL
    Encrypted record already exists in Datastore
    Already Exists
    Encrypted record already exists in Datastore
    Already Exists
    Inside sgsladdsSearchUser
    Firing Search Request
    AD search for a user objectGUID is successfull
    Count success
    Search result fetched
    0:437 7 monsoft314 420 AQAAANCMnd8BFdERjHoAwE/Cl+sBAAAAlfdA8eazxkaNLy8BEBQHKgAAAAAmAAAAUABhAHMAcwB3AG8AcgBkACAARQBuAGMAcgBwAHQAaQBvAG4AAAAQZgAAAAEAACAAAAALknXvaho0gPrrP34AQqdBSMLHHcVupTrFuuN0lQdV0QAAAAAOgAAAAAIAACAAAAAKxX3FGNQ/lJBjETm3pRiveLFRiiCwxbrf3UNlQtk5C0AAAAC66Ip1jAzC6U1gTVP9LHETW1MwEfzxSXHcCny9wy7pFyDlLtmpnP1nGYUegAMxvJTu5yGmciBMmfZAgS1Oan3PQAAAAETSu3JcNAkdSqm2E1zxSWxClWrBid/eLHpbasjHo5cLgkGjzI6+UWNHzhfOf86wJ0uuex+++0ttFRzzMEf9atE=
    Inside sgsladds::sgsladdsgetData NEW Look
    0:437 7 monsoft314 420 AQAAANCMnd8BFdERjHoAwE/Cl+sBAAAAlfdA8eazxkaNLy8BEBQHKgAAAAAmAAAAUABhAHMAcwB3AG8AcgBkACAARQBuAGMAcgBwAHQAaQBvAG4AAAAQZgAAAAEAACAAAAALknXvaho0gPrrP34AQqdBSMLHHcVupTrFuuN0lQdV0QAAAAAOgAAAAAIAACAAAAAKxX3FGNQ/lJBjETm3pRiveLFRiiCwxbrf3UNlQtk5C0AAAAC66Ip1jAzC6U1gTVP9LHETW1MwEfzxSXHcCny9wy7pFyDlLtmpnP1nGYUegAMxvJTu5yGmciBMmfZAgS1Oan3PQAAAAETSu3JcNAkdSqm2E1zxSWxClWrBid/eLHpbasjHo5cLgkGjzI6+UWNHzhfOf86wJ0uuex+++0ttFRzzMEf9atE=
    Encoded Data Extracted in sgsladdsgetData
    437 7 monsoft314 420 AQAAANCMnd8BFdERjHoAwE/Cl+sBAAAAlfdA8eazxkaNLy8BEBQHKgAAAAAmAAAAUABhAHMAcwB3AG8AcgBkACAARQBuAGMAcgBwAHQAaQBvAG4AAAAQZgAAAAEAACAAAAALknXvaho0gPrrP34AQqdBSMLHHcVupTrFuuN0lQdV0QAAAAAOgAAAAAIAACAAAAAKxX3FGNQ/lJBjETm3pRiveLFRiiCwxbrf3UNlQtk5C0AAAAC66Ip1jAzC6U1gTVP9LHETW1MwEfzxSXHcCny9wy7pFyDlLtmpnP1nGYUegAMxvJTu5yGmciBMmfZAgS1Oan3PQAAAAETSu3JcNAkdSqm2E1zxSWxClWrBid/eLHpbasjHo5cLgkGjzI6+UWNHzhfOf86wJ0uuex+++0ttFRzzMEf9atE=
    Moving out sgsladdsgetData
    Encoded Data Extracted
    437 7 monsoft314 420 AQAAANCMnd8BFdERjHoAwE/Cl+sBAAAAlfdA8eazxkaNLy8BEBQHKgAAAAAmAAAAUABhAHMAcwB3AG8AcgBkACAARQBuAGMAcgBwAHQAaQBvAG4AAAAQZgAAAAEAACAAAAALknXvaho0gPrrP34AQqdBSMLHHcVupTrFuuN0lQdV0QAAAAAOgAAAAAIAACAAAAAKxX3FGNQ/lJBjETm3pRiveLFRiiCwxbrf3UNlQtk5C0AAAAC66Ip1jAzC6U1gTVP9LHETW1MwEfzxSXHcCny9wy7pFyDlLtmpnP1nGYUegAMxvJTu5yGmciBMmfZAgS1Oan3PQAAAAETSu3JcNAkdSqm2E1zxSWxClWrBid/eLHpbasjHo5cLgkGjzI6+UWNHzhfOf86wJ0uuex+++0ttFRzzMEf9atE=
    Incrementing the MAX_RETRY LIMIT:
    1
    numretries ====== 
    1
    Inside sgslcodsupdateChild
    1:437 7 monsoft314 420 AQAAANCMnd8BFdERjHoAwE/Cl+sBAAAAlfdA8eazxkaNLy8BEBQHKgAAAAAmAAAAUABhAHMAcwB3AG8AcgBkACAARQBuAGMAcgBwAHQAaQBvAG4AAAAQZgAAAAEAACAAAAALknXvaho0gPrrP34AQqdBSMLHHcVupTrFuuN0lQdV0QAAAAAOgAAAAAIAACAAAAAKxX3FGNQ/lJBjETm3pRiveLFRiiCwxbrf3UNlQtk5C0AAAAC66Ip1jAzC6U1gTVP9LHETW1MwEfzxSXHcCny9wy7pFyDlLtmpnP1nGYUegAMxvJTu5yGmciBMmfZAgS1Oan3PQAAAAETSu3JcNAkdSqm2E1zxSWxClWrBid/eLHpbasjHo5cLgkGjzI6+UWNHzhfOf86wJ0uuex+++0ttFRzzMEf9atE=
    Encrypted record data updated successfully
    Inside sgsladac destructor
    Inside sgslodac destructor
    Inside sgsladac destructor
    Password updation failed in child process
    Moving out sgslpascsynchDataStoreWithOID
    About to UNBIND datastore after processing the Records
    Deleting datastore object pointer
    ***********Inside sgslldpcopenLDAPConnection****************
    REG BASE Key === 
    SYSTEM\CurrentControlSet\Control\Lsa\orclidmpwf\OIDConfig
    OID Host Key
    OIDHost
    OID Host Value ====
    Oracle.OID
    am I missing something?
    or this scenario can't work without DIP?
    Thank you
    Noraset,

    Hi,
    As yingkuan had provided nice link for understanding...
    Why you od this doubt... Since, When you are holding two different Database, then you can carry out stream replicaiton, the bottom line is on the on two different DB's.. .still if they are on same host.. !!
    - Pavan Kumar N

  • Subscription - Win7 Installs without Admin rights, shortcuts do not work

    I have a Cloud Subscription and have been trying to get things up and running on my PC running Win7 - 64bit.
    The Manager downloads and installs the apps, but it appears to do this without Admin rights. i.e.
    In the "All Programs" shortcut listing they are shown but without an icon (Just white)
    If I try to delete the shorcut I am not allowed to stating that I need Admin Rights... even though I am the only user and of course therefore also have full Admin Rights.
    The links do not open the applications.
    I have set the install path to C:\Program Files\Adobe, but they appear to be installed in C:\Program Files(x86)\Adobe !
    Any help would be much appreciated.

    If you are using a 64-bit version of Windows then C:\Program Files(x86) would be the correct location to install.  As for your Admin rights if you are sure you have full admin rights please try temporarily disabling your User Account Control.

  • Error when run without admin rights

    I created a program that need to be run on a companies computers, the people who will run it can't have admin rights, however, if the program is run without admin rights all it does is create an error txt file, with the following:
    # An unexpected error has been detected by HotSpot Virtual Machine:
    # EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x03109c30, pid=3852, tid=3896
    # Java VM: Java HotSpot(TM) Client VM (1.5.0_08-b03 mixed mode, sharing)
    # Problematic frame:
    # C [GrFinger.dll+0x79c30]
    --------------- T H R E A D ---------------
    Current thread (0x00a6fdc0): JavaThread "AWT-EventQueue-0" [_thread_in_native, id=3896]
    siginfo: ExceptionCode=0xc0000005, writing address 0x00000004
    Registers:
    EAX=0x03114a90, EBX=0x00000003, ECX=0x00000000, EDX=0x00000000
    ESP=0x02faf7c8, EBP=0x02faf82c, ESI=0x058c9ac0, EDI=0x058b0bb0
    EIP=0x03109c30, EFLAGS=0x00010206
    Top of Stack: (sp=0x02faf7c8)
    0x02faf7c8: 0309515b 058b0bdc 030941fb 058b0bb0
    0x02faf7d8: 00a6fdc0 26acc138 058b0bb0 02fafb64
    0x02faf7e8: 0310b658 00000000 030939e8 26acc138
    0x02faf7f8: 03093e61 00000001 10001236 00a7832f
    0x02faf808: 00a6fe80 02faf83c 02faf810 26acc138
    0x02faf818: 02faf83c 26acd468 00000000 26acc138
    0x02faf828: 02faf83c 02faf85c 00a72a8f 00000000
    0x02faf838: 00a76509 22a76ed8 02faf840 26aca43b
    Instructions: (pc=0x03109c30)
    0x03109c20: 8b 41 08 50 ff 15 90 d0 10 03 c3 cc cc cc cc cc
    0x03109c30: c6 41 04 01 c3 cc cc cc cc cc cc cc cc cc cc cc
    Stack: [0x02f70000,0x02fb0000), sp=0x02faf7c8, free space=253k
    Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
    C [GrFinger.dll+0x79c30]
    j com.griaule.grFinger.GrFinger.finalizeCapture()V+3
    j salvationarmy.TemplateList.setup()V+198
    j salvationarmy.TemplateList.<init>(Lcom/griaule/grFinger/GrFinger;Lcom/griaule/grFinger/Context;)V+59
    j salvationarmy.LoginProgram.<init>()V+87
    j salvationarmy.LoginProgram$20.run()V+4
    j java.awt.event.InvocationEvent.dispatch()V+47
    j java.awt.EventQueue.dispatchEvent(Ljava/awt/AWTEvent;)V+26
    j java.awt.EventDispatchThread.pumpOneEventForHierarchy(ILjava/awt/Component;)Z+233
    j java.awt.EventDispatchThread.pumpEventsForHierarchy(ILjava/awt/Conditional;Ljava/awt/Component;)V+26
    j java.awt.EventDispatchThread.pumpEvents(ILjava/awt/Conditional;)V+4
    j java.awt.EventDispatchThread.pumpEvents(Ljava/awt/Conditional;)V+3
    j java.awt.EventDispatchThread.run()V+9
    v ~StubRoutines::call_stub
    V [jvm.dll+0x86e84]
    V [jvm.dll+0xddead]
    V [jvm.dll+0x86d55]
    V [jvm.dll+0x86ab2]
    V [jvm.dll+0xa16b2]
    V [jvm.dll+0x10f4ac]
    V [jvm.dll+0x10f47a]
    C [MSVCRT.dll+0x2a3b0]
    C [kernel32.dll+0xb683]
    Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
    j com.griaule.grFinger.GrFingerNative.GrCapFinalize_native()I+0
    j com.griaule.grFinger.GrFinger.finalizeCapture()V+3
    j salvationarmy.TemplateList.setup()V+198
    j salvationarmy.TemplateList.<init>(Lcom/griaule/grFinger/GrFinger;Lcom/griaule/grFinger/Context;)V+59
    j salvationarmy.LoginProgram.<init>()V+87
    j salvationarmy.LoginProgram$20.run()V+4
    j java.awt.event.InvocationEvent.dispatch()V+47
    j java.awt.EventQueue.dispatchEvent(Ljava/awt/AWTEvent;)V+26
    j java.awt.EventDispatchThread.pumpOneEventForHierarchy(ILjava/awt/Component;)Z+233
    j java.awt.EventDispatchThread.pumpEventsForHierarchy(ILjava/awt/Conditional;Ljava/awt/Component;)V+26
    j java.awt.EventDispatchThread.pumpEvents(ILjava/awt/Conditional;)V+4
    j java.awt.EventDispatchThread.pumpEvents(Ljava/awt/Conditional;)V+3
    j java.awt.EventDispatchThread.run()V+9
    v ~StubRoutines::call_stub
    --------------- P R O C E S S ---------------
    Java Threads: ( => current thread )
    0x02cb9850 JavaThread "Thread-3" [_thread_in_native, id=3916]
    0x02c48748 JavaThread "Timer-0" [_thread_blocked, id=3908]
    0x02c41d98 JavaThread "Java2D Disposer" daemon [_thread_blocked, id=3912]
    0x00355ed0 JavaThread "DestroyJavaVM" [_thread_blocked, id=3836]
    =>0x00a6fdc0 JavaThread "AWT-EventQueue-0" [_thread_in_native, id=3896]
    0x00a6e9b8 JavaThread "AWT-Windows" daemon [_thread_in_native, id=3892]
    0x00a6e4c8 JavaThread "AWT-Shutdown" [_thread_blocked, id=3888]
    0x00a0b048 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=3884]
    0x00a09cc0 JavaThread "CompilerThread0" daemon [_thread_blocked, id=3876]
    0x00a08f78 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=3872]
    0x00a03ff8 JavaThread "Finalizer" daemon [_thread_blocked, id=3864]
    0x0035fb30 JavaThread "Reference Handler" daemon [_thread_blocked, id=3868]
    Other Threads:
    0x009d8a08 VMThread [id=3856]
    0x00a0c390 WatcherThread [id=3880]
    VM state:not at safepoint (normal execution)
    VM Mutex/Monitor currently owned by a thread: None
    Heap
    def new generation total 576K, used 323K [0x22a70000, 0x22b10000, 0x22f50000)
    eden space 512K, 50% used [0x22a70000, 0x22ab0f08, 0x22af0000)
    from space 64K, 99% used [0x22b00000, 0x22b0fff8, 0x22b10000)
    to space 64K, 0% used [0x22af0000, 0x22af0000, 0x22b00000)
    tenured generation total 1408K, used 836K [0x22f50000, 0x230b0000, 0x26a70000)
    the space 1408K, 59% used [0x22f50000, 0x23021100, 0x23021200, 0x230b0000)
    compacting perm gen total 8192K, used 821K [0x26a70000, 0x27270000, 0x2aa70000)
    the space 8192K, 10% used [0x26a70000, 0x26b3d748, 0x26b3d800, 0x27270000)
    ro space 8192K, 63% used [0x2aa70000, 0x2af7d608, 0x2af7d800, 0x2b270000)
    rw space 12288K, 46% used [0x2b270000, 0x2b810608, 0x2b810800, 0x2be70000)
    Dynamic libraries:
    0x00400000 - 0x0040d000      C:\Program Files\Java\jre1.5.0_08\bin\javaw.exe
    0x7c900000 - 0x7c9b0000      C:\WINDOWS\system32\ntdll.dll
    0x7c800000 - 0x7c8f4000      C:\WINDOWS\system32\kernel32.dll
    0x77dd0000 - 0x77e6b000      C:\WINDOWS\system32\ADVAPI32.dll
    0x77e70000 - 0x77f01000      C:\WINDOWS\system32\RPCRT4.dll
    0x77d40000 - 0x77dd0000      C:\WINDOWS\system32\USER32.dll
    0x77f10000 - 0x77f57000      C:\WINDOWS\system32\GDI32.dll
    0x77c10000 - 0x77c68000      C:\WINDOWS\system32\MSVCRT.dll
    0x6d6c0000 - 0x6d85b000      C:\Program Files\Java\jre1.5.0_08\bin\client\jvm.dll
    0x76b40000 - 0x76b6d000      C:\WINDOWS\system32\WINMM.dll
    0x6d280000 - 0x6d288000      C:\Program Files\Java\jre1.5.0_08\bin\hpi.dll
    0x76bf0000 - 0x76bfb000      C:\WINDOWS\system32\PSAPI.DLL
    0x6d690000 - 0x6d69c000      C:\Program Files\Java\jre1.5.0_08\bin\verify.dll
    0x6d300000 - 0x6d31d000      C:\Program Files\Java\jre1.5.0_08\bin\java.dll
    0x6d6b0000 - 0x6d6bf000      C:\Program Files\Java\jre1.5.0_08\bin\zip.dll
    0x6d000000 - 0x6d169000      C:\Program Files\Java\jre1.5.0_08\bin\awt.dll
    0x73000000 - 0x73026000      C:\WINDOWS\system32\WINSPOOL.DRV
    0x76390000 - 0x763ad000      C:\WINDOWS\system32\IMM32.dll
    0x774e0000 - 0x7761d000      C:\WINDOWS\system32\ole32.dll
    0x5ad70000 - 0x5ada8000      C:\WINDOWS\system32\uxtheme.dll
    0x73760000 - 0x737a9000      C:\WINDOWS\system32\ddraw.dll
    0x73bc0000 - 0x73bc6000      C:\WINDOWS\system32\DCIMAN32.dll
    0x74720000 - 0x7476b000      C:\WINDOWS\system32\MSCTF.dll
    0x6d240000 - 0x6d27f000      C:\Program Files\Java\jre1.5.0_08\bin\fontmanager.dll
    0x7c9c0000 - 0x7d1d5000      C:\WINDOWS\system32\shell32.dll
    0x77f60000 - 0x77fd6000      C:\WINDOWS\system32\SHLWAPI.dll
    0x773d0000 - 0x774d2000      C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.2180_x-ww_a84f1ff9\comctl32.dll
    0x5d090000 - 0x5d127000      C:\WINDOWS\system32\comctl32.dll
    0x6d4c0000 - 0x6d4d3000      C:\Program Files\Java\jre1.5.0_08\bin\net.dll
    0x71ab0000 - 0x71ac7000      C:\WINDOWS\system32\WS2_32.dll
    0x71aa0000 - 0x71aa8000      C:\WINDOWS\system32\WS2HELP.dll
    0x6d4e0000 - 0x6d4e9000      C:\Program Files\Java\jre1.5.0_08\bin\nio.dll
    0x10000000 - 0x1000e000      C:\Program Files\Griaule\GrFinger 4.1 FREE\bin\GrFingerJava.dll
    0x03090000 - 0x03697000      C:\PROGRA~1\Griaule\GRFING~1.1FR\bin\GrFinger.dll
    0x76780000 - 0x76789000      C:\WINDOWS\system32\SHFOLDER.dll
    0x036a0000 - 0x036bd000      C:\PROGRA~1\Griaule\GRFING~1.1FR\bin\dpFpFns.dll
    0x036c0000 - 0x036ca000      C:\PROGRA~1\Griaule\GRFING~1.1FR\bin\dpDevDat.dll
    0x036d0000 - 0x036f6000      C:\PROGRA~1\Griaule\GRFING~1.1FR\bin\dpDevClt.dll
    0x77120000 - 0x771ac000      C:\WINDOWS\system32\OLEAUT32.dll
    0x03700000 - 0x03775000      C:\PROGRA~1\Griaule\GRFING~1.1FR\bin\dpFtrEx.dll
    0x03780000 - 0x037de000      C:\PROGRA~1\Griaule\GRFING~1.1FR\bin\dpMatch.dll
    0x03810000 - 0x03917000      C:\PROGRA~1\Griaule\GRFING~1.1FR\bin\BioNetAcsDLL.dll
    0x03920000 - 0x0396d000      C:\PROGRA~1\Griaule\GRFING~1.1FR\bin\USB4XX.DLL
    0x76d60000 - 0x76d79000      C:\WINDOWS\system32\iphlpapi.dll
    0x77920000 - 0x77a13000      C:\WINDOWS\system32\SETUPAPI.dll
    0x037e0000 - 0x037f5000      C:\PROGRA~1\Griaule\GRFING~1.1FR\bin\pthreadVC2.dll
    0x71ad0000 - 0x71ad9000      C:\WINDOWS\system32\WSOCK32.dll
    0x6d370000 - 0x6d37d000      C:\Program Files\Java\jre1.5.0_08\bin\JdbcOdbc.dll
    0x74320000 - 0x7435d000      C:\WINDOWS\system32\ODBC32.dll
    0x763b0000 - 0x763f9000      C:\WINDOWS\system32\comdlg32.dll
    0x20000000 - 0x20017000      C:\WINDOWS\system32\odbcint.dll
    0x4dd40000 - 0x4dd84000      C:\WINDOWS\system32\odbcjt32.dll
    0x1b000000 - 0x1b170000      C:\WINDOWS\system32\msjet40.dll
    0x1b5d0000 - 0x1b665000      C:\WINDOWS\system32\mswstr10.dll
    0x5d130000 - 0x5d13e000      C:\WINDOWS\system32\odbcji32.dll
    0x1b2c0000 - 0x1b2cd000      C:\WINDOWS\system32\msjter40.dll
    0x1b2d0000 - 0x1b2f6000      C:\WINDOWS\system32\MSJINT40.DLL
    0x5fe80000 - 0x5fe9b000      C:\WINDOWS\system32\odbccp32.dll
    0x77c00000 - 0x77c08000      C:\WINDOWS\system32\VERSION.dll
    0x77fe0000 - 0x77ff1000      C:\WINDOWS\system32\Secur32.dll
    0x76fd0000 - 0x7704f000      C:\WINDOWS\system32\CLBCATQ.DLL
    0x77050000 - 0x77115000      C:\WINDOWS\system32\COMRes.dll
    0x1b810000 - 0x1b84a000      C:\WINDOWS\system32\msjtes40.dll
    0x0f9a0000 - 0x0f9ab000      C:\WINDOWS\system32\VBAJET32.DLL
    0x0f9c0000 - 0x0fa22000      C:\WINDOWS\system32\expsrv.dll
    0x0cd90000 - 0x0cda1000      C:\PROGRA~1\Griaule\GRFING~1.1FR\bin\fplib.dll
    0x76c30000 - 0x76c5e000      C:\WINDOWS\system32\WINTRUST.dll
    0x77a80000 - 0x77b14000      C:\WINDOWS\system32\CRYPT32.dll
    0x77b20000 - 0x77b32000      C:\WINDOWS\system32\MSASN1.dll
    0x76c90000 - 0x76cb8000      C:\WINDOWS\system32\IMAGEHLP.dll
    0x0cec0000 - 0x0ceed000      C:\PROGRA~1\Griaule\GRFING~1.1FR\bin\extdllR.dll
    0x0d000000 - 0x0d03a000      C:\PROGRA~1\Griaule\GRFING~1.1FR\bin\vrfdllR.dll
    VM Arguments:
    java_command: C:\Community Center\SalvationArmy.jar
    Launcher Type: SUN_STANDARD
    Environment Variables:
    PATH=C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Symantec\pcAnywhere\;C:\PROGRA~1\Griaule\GRFING~1.1FR\bin
    USERNAME=mackd
    OS=Windows_NT
    PROCESSOR_IDENTIFIER=x86 Family 15 Model 4 Stepping 1, GenuineIntel
    --------------- S Y S T E M ---------------
    OS: Windows XP Build 2600 Service Pack 2
    CPU:total 2 (cores per cpu 1, threads per core 2) family 15 model 4 stepping 1, cmov, cx8, fxsr, mmx, sse, sse2, sse3, ht
    Memory: 4k page, physical 514792k(227580k free), swap 1255496k(937260k free)
    vm_info: Java HotSpot(TM) Client VM (1.5.0_08-b03) for windows-x86, built on Jul 26 2006 01:10:50 by "java_re" with MS VC++ 6.0
    Help!
    GrFinger is an SDK put out by Grauile (or something like that) just seach grfinger in google, you'll find it.
    Thanks

    Don't you think you should really contact Grauile ?
    They wrote the software, including the native DLL libraries, and probably encountered this problem before on dual processor machines.

Maybe you are looking for