Using patch plans for 12.1.0.2 target oracle home fails with 'PREREQ_MESG: Unable to get the version of OPatch'

We are attempting to use patch plan to apply PSU and one-offs to a new 12.1.0.2 database oracle home. Our EM version is 12.1.0.4.
We are experiencing the same issue described in ''Bug 20271609 : Unable to get the version of OPatch". This bug is closed as 'duplicate bug to filer' but we do not appear to have visibility into what patch/bug fixes the issue.
Description from the above mentioned bug is our same issue. We do not have this issue when we use patch plans against an 11.2.x oracle_home target. It is unique to 12.1.0.2 oracle_home target.
Description from the bug:
The Plan failed in step "Run Prerequisite Checks" with the following errors:
PREREQ_NAME: Minimum Version of OPatch
PREREQ_DESC: Check if the required version of OPatch is present on the target
PREREQ_TYPE: PATCH_TOOL_CHECK
PREREQ_STATUS: FAILED
PREREQ_MESG: Unable to get the version of OPatch at
/u01/app/oracle/product/12.1.0/dbhome_2/Opatch
We have opened an SR to see if we can get more info on what was already identified as a bug. Has anyone else experienced this issue? If so, can you share any patches or workarounds (other than manually applying patches) that you found useful?
Thanks.

You'll probably get the same info from Support, but the workaround is to use the Patch Database (however that doesn't work if there's no DB target associated to that home). If you were trying to do patchign out of place (clone home, patch, then move db's), EM can do this for you. If you're just installing a new DB Home and trying to patch, then i don' think there's another workaround. The base bug is marked fixed though, so a backport for the 12.1.0.6 plugin should be available very soon. I would ask the support analyst to request the backport for your plugin/patch level...

Similar Messages

Is there a patch planned for the increase in battery use after I upgraded yesterday?

Is there a patch planned for the increase in battery use after I upgraded yesterday? I've closed all the open apps, I'm not using wifi and my battery is going down really quickly.

Restore the phone as NEW. There's no patch needed.

The App Store says I have updates for I-Photo and Garage Band. When I try to update I get the following message: You have updates available for other accounts To update this application, sign in to the account you used to purchase it. I only have 1 acc

The App Store says I have updates for I-Photo and Garage Band. When I try to update I get the following message: You have updates available for other accounts To update this application, sign in to the account you used to purchase it." Both apps came with my computer and as far as I know I only have one Apple account. Any thoughts? Thanks.
Karen

Thanks for you reply. I'm 99% positive that I'm using the user id and password that I used to set up my computer. That's why I'm stumped. I read the solution someone else suggested (type your user name without @gmail and create a new password. When I tried it, I was asked for my birthday. It didn't recognize it. I know I got my birthday correct. Oh well...
Karen

Reinstalling,APSE11,from,original,CD,with,serial,number,,I,get,the,message,"Key,not,valid, for,use,in,specified,state."

While reinstalling APSE 11 (windows) from original CD (with serial number), I get the message "Key not valid for use in specified state." What do I do?

Unfortunately, you're in the wrong forum. This is not the Elements forum.
Here's the link to the forum you want:
https://forums.adobe.com/community/photoshop_elements/content

Can I use SQL developer for a Sybase IQ migration to Oracle?

Hello,
Can I use SQL developer for a Sybase IQ migration to Oracle?
Currently in the supported list appears only Sybase Adaptive Server 12 and 15.
Thanks,
Florin D.

Sorry, we don't support IQ migrations at this time.

We now use Acrobat xi for special active forms we created that include certifications and signature fields, some of the forms are programmed to create other forms, will we have a problem upgrading to DC

We now use Acrobat xi for special active forms we created that include certifications and signature fields, some of the forms are programmed to create other forms, will we have a problem upgrading to DC
Our users use a form template to create other adobe forms with calculated fields, signature fields (using digital signatures)
, and buttons. Will we be able to continue developing these forms if we upgrade to Acrobat DC?

Hi Alex ,
In general ,you would not have any issues and problems moving to Acrobat DC .It has a different user interface and with more enhanced features .
You would be able to develop the kind of forms you are referring to .
You could refer to the following document to get more information about Acrobat DC .
FAQ | Adobe Acrobat DC
If in case you are referring to any particular issue or problem or if you face any regarding Acrobat DC ,we are always here to help you with that .
Please feel free to write us back .
Regards
Sukrit Dhingra

I currently have the 2 gig data plan for $50, plus a free 1 gig promotional attachment but Verizon is currently offering the 3 gig data plan for $50, but if I upgrade will I lose the free 1 gig promotion I currently have attached to my account?

I currently have the 2 gig data plan for $50, plus a free 1 gig promotional attachment but Verizon is currently offering the 3 gig data plan for $50, but if I upgrade will I lose the free 1 gig promotion I currently have attached to my account?
I understand I will still be getting 3 gigs of data for the $50, I would just like to continue to have the free 1 gig promotion I was already getting, if you Verizon was willing to do it before then why can't they continue to do it now?

Like Ann154 said, changing plans often results in the loss of any promos you may have. In your case, it makes no difference to the price you will pay - you'll have 3 GB for $50. Whether you have 1GB free, or a better price on the 3GB plan is a wash. I'd leave things alone....

Error while applying a patch "Unable to get the database connection"

Dear Experts,
A patch which got successfully applied is failing Production and the error is kind of surprising to me.
Apps version is 11.5.10.2
db version is 10.2.0.4
The worker log file shows
Time when worker restarted job: Thu Nov 24 2011 22:14:52
Start time for file is: Thu Nov 24 2011 22:14:52
adjava -ms128m -mx256m -nojit oracle.apps.fnd.odf2.FndXdfCmp &un_apps &pw_apps &un_apps &pw_apps &jdbc_protocol &jdbc_db_addr table &fullpath_pa_patch/115
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
Temporarily resetting CLASSPATH to:
"/erp/oracle/prodappl/ad/11.5.0/java/adjri.zip:/usr/java14/jre/lib/charsets.jar:/usr/java14/jre/lib/core.jar:/usr/java14/jre/lib/graphics.jar:/usr/java1
Calling /usr/java14/bin/java ...
Exception occured
              Copyright (c) 2003 Oracle Corporation
                 Redwood Shores, California, USA
         XDF(XML Object Description File) Comparison Utility
                        Version 1
NOTE: You may not use this utility for custom development
      unless you have written permission from Oracle Corporation.
Unable to get the database connection using schema username/passwordIo exception: The Network Adapter could not establish the connection
AD Run Java Command is complete.
                     Copyright (c) 2002 Oracle Corporation
                        Redwood Shores, California, USA
                                    AD Java
                                 Version 11.5.0
NOTE: You may not use this utility for custom development
      unless you have written permission from Oracle Corporation.
AD Worker error:
The above program failed. See the error messages listed
above, if any, or see the log and output files for the program.
Time when worker failed: Thu Nov 24 2011 22:14:53
{code}
The error says database connection error. I am able to connect to the database using sqlplus. I tried to restart the failed worker, but the same error is repeating.
Any help would be appreciated.
Thanks
qARS
Edited by: user7640966 on Nov 24, 2011 9:07 AM

Hussein,
One thing which I noticed now is in the apps Tier the
tnsnames.ora under $TNS_ADMIN
shows entry like this:
PROD=
        (DESCRIPTION=
                (ADDRESS=(PROTOCOL=tcp)(HOST=<appsServerName>)(PORT=1521))
                (ADDRESS=(PROTOCOL=tcp)(HOST=<dbServer>)(PORT=1521))
            (CONNECT_DATA=
                (SID=PROD)
        )Actually *(ADDRESS=(PROTOCOL=tcp)(HOST=<appsIPaddress>)(PORT=1521))* this line in the tnsnames.ora is not correct. In fact the appsServerName should be replaced with dbServerName
I deleted the tnsnames.ora and reran autoconfig but it is again recreating the same entry.
Any clue how this can be fixed?
Thanks
qARS

I have a tesco router and an external hard drive attached to it as a network drive (shared) for my macbook and MB-Air. Have no problems with my MB accessing it, but with MB-AIR it says - 'the version of the server you are trying to connect to is not supp

I have a tesco router and an external hard drive attached to it as a network drive (shared) for my macbook and MB-Air. Have no problems with my MB accessing it, but with MB-AIR it says - 'the version of the server you are trying to connect to is not supported. pls contact your system administrator to resolve the problem'. MB-Air uses maverick downloaded yesterday - upgrade from mountain lion. MB uses snow leopard still, as i am quite used to it and am thinking of upgrade if mavericks work fine on air. Also have parallel on snow leopard but it is no longer supported according to mac website - if i upgrade am i going to lose my parallel and will have to buy a new one!!!

Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think?

HT1203 Can I share one iTunes account for my iPad and two I phones? If so, how can I get the purchased apps and music on all three devices? Do I need a home computer,

Can I share one iTunes account for my iPad and two I phones? If so, how can I get the purchased apps and music on all three devices? How do I sync all the devices to have the same music and apps?

You can set up an iCloud account on each one (the SAME iCloud account using the same AppleID on each) and then sync via iCloud.
http://support.apple.com/kb/HT5262\
However, an iCloud backup nor sync contains purchased content - that is available for redownload from the iTunes and App stores (so no need to waste iCloud space storing it for you).
So, for purchased content, you will have to download it on each device - just use the same AppleID and download each item on each device.
Without a computer to aid the sync'ing, downloading the purchased content on each device is the only way.
P.S audiobooks cannot be re-downloaded once purchased (all other content can be), so without a computer to save, store and move the audiobook files around, you will only be able to put those on one device - the one you first purchase it on.

Unable to get the file system information for: \\****servername\E$\; error = 64 Unable to distribute content to DP

One of our DPs has stopped loading content.
I've research for quite a bit and cannot find a clear cut reason to this. This server only has a DP role, I verified sharing permissions, all looked good. This DP has been running just fine for the last year or so and all sudden it will no longer load
packages. The disk drive is still present I can still reach the hidden share \\servername.com\E$
Verified that the SMSSIG$ folder is there and the last entry is from 4/23/2015
SCCM 2012 R2
OS 2008 R2 Standard
Any help is greatly appreciated!
Here's a snipit from the distmgr.log
Start updating the package on server ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\...
Attempting to add or update a package on a distribution point.
Will wait for 1 threads to end.
Thread Handle = 0000000000001E48
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=***.com SITE=1AB PID=2472 TID=8252 GMTDATE=Thu Apr 30 19:12:01.972 2015 ISTR0="SYSMGMT Source" ISTR1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="CAS00087" AID1=404 AVAL1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
SMS_DISTRIBUTION_MANAGER 4/30/2015 2:12:01 PM
8252 (0x203C)
The current user context will be used for connecting to ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\.
Successfully made a network connection to \\*****.com\ADMIN$.
Ignoring drive \\*****.com\C$\. File \\*****.com\C$\NO_SMS_ON_DRIVE.SMS exists.
Unable to get the file system information for: \\*****.com\E$\; error = 64.
Failed to find a valid drive on the distribution point ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\
Cannot find or create the signature share.
STATMSG: ID=2324 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=sccmprdpr1sec2.mmm.com SITE=1AB PID=2472 TID=8252 GMTDATE=Thu Apr 30 19:12:55.206 2015 ISTR0="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
ISTR1="CAS00087" ISTR2="" ISTR3="30" ISTR4="94" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="CAS00087" AID1=404 AVAL1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
Error occurred. Performing error cleanup prior to returning.
Cancelling network connection to \\*****.com\ADMIN$.

Error 64 is being returned which is simply "the network name is no longer available".
There can be a number of reasons for this from SMB compatibility issues (2003 servers wont support SMB2), to the expected and actual computer name of the boxes don't match (tries to authenticate with server.tld.com when the actual name is srv-01.tld.com and
you just put a C-name in). I'd start from the top: Try opening said share from the Primary Site server as that's the box doing the work. Verify the IP and computer name is legit and that no one has played ACL games between the two systems (remember
RPC only initiates/listens on port 135 but established connections are up in the dynamic port range).
At the end of the day it's an issues "underneath" SCCM, and not an SCCM problem specifically.

Acrobat 7 mandatory update failing with error 16820 and blocking the use of the program

Acrobat 7 mandatory update failing with error 16820 and blocking the use of the program

Sorry I can't get the screen print to upload
It says
Mandatory Update Available
A Mandatory version of this application is available for download. Application can't continue without installing this version.
Application:     Acrobat_com
Installed version: 2.0.0.0
Update Version : 2.3.0.0
Download now                    Quit
Release notes ( this is blank)
After selecting 'Download Now' I get the following message;
     Download failed
     There was an error downloading the update. Error #16820
     Close

I need a copy of the PDF guide for version 12 I have just installed - the link that appears in searches takes me to version 13. Where can I get the version 12 copy please?

I need a copy of the PDF guide for version 12 I have just installed - the link that appears in searches takes me to version 13. Where can I get the version 12 copy please? (I bought the Photoshop Elements and Premiere Elements pack, but have only just installed and started to use).

Hi,
You can find the Help Archives at Adobe Premiere Elements Help | Archive
Regards,
Premiere Elements Team

I am using a timed while loop and am unable to get the loop to run at a speed of less than 1ms (I am currently using the Wait(ms) function). How can I get a faster response?

I am trying to create a virtual engine within a timed while loop and am unable to get the loop to run at a speed of less than 1ms (I am currently using the Wait(ms) function). This does not however allow realistic engine speeds. How can I overcome this? I have access to a PCI-MIO-16E-4 board.

andyt writes:
> I am using a timed while loop and am unable to get the loop to run at
> a speed of less than 1ms (I am currently using the Wait(ms) function).
> How can I get a faster response?
>
> I am trying to create a virtual engine within a timed while loop and
> am unable to get the loop to run at a speed of less than 1ms (I am
> currently using the Wait(ms) function). This does not however allow
> realistic engine speeds. How can I overcome this? I have access to
> a PCI-MIO-16E-4 board.
Andy,
Unless you use a real time platform, getting extactly 1 ms loop rate
(or even less) is impossible. It starts getting troublesome at about
0.1 Hz for standard operating systems.
I'd tackle your problem with "if i mod 10 == 0 then sleep 1 ms".
Of
course this is jerky by design.
HTH,
Johannes Nie?

Want to be able to open tabs in multiple rows, rather than in a single row. I used tab mix plus before, but it says it is not compatible with New tab Homepage. The older version of Firefox allowed this very easily.

Want to be able to open tabs in multiple rows, rather than in a single row. I used tab mix plus before, but it says it is not compatible with New tab Homepage. The older version of Firefox allowed this very easily.

Your plugins list shows outdated plugin(s) with known security and stability risks.
*Java Plug-in 1.5.0_06 for Netscape Navigator (DLL Helper)
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)

Using patch plans for 12.1.0.2 target oracle home fails with 'PREREQ_MESG: Unable to get the version of OPatch'

Similar Messages

Maybe you are looking for