Using Personal Domain Name with iWeb08

As per instructions I have setup my domain and made the changes to the Cname records with my Domain Registry ( https://cp.domaincentral.com.au). Domain is noted at the bottom of iWeb as I would expect and also if I upload I get the notation that the page will be seen as the domain.
Page cannot be found on my domain. I can see with the generic .mac address fine.
Cname Info:
jimleonard.net.au. CNAME web.mac.com. 3600 Manual Active Yes
Have I missed somthing?

Okay, I have waited a period of 48 hours for updates to be be done with my domain name:
jimleonard.com.au. NS dns1.domaincentral.net.au. 3600 Auto Active Yes
jimleonard.com.au. NS dns2.domaincentral.net.au. 3600 Auto Active Yes
jimleonard.com.au. CNAME web.mac.com. 3600 Manual Active Yes
jimleonard.com.au. A 17.250.248.34 3600 Manual Active Yes
www.jimleonard.com.au. CNAME web.mac.com. 3600 Manual Active Yes
Config is fine @ .mac:
Personal Domain
.Mac is configured to host your domain:
www.jimleonard.com.au
If you entered the correct settings at your registrar more than 48 hours ago and your iWeb site still doesn't appear at your domain, try these troubleshooting tips.
I have also made changes and uploaded to"all.mac" I am still unable to see the site with the Domain, all is fine as the .Mac address:
http://web.mac.com/jimleonard/Travel/Jim_and_SuzieTravels.html
Have I missed the point?

Similar Messages

  • Problem with iWeb after associating a personal domain name with my MobileMe

    I think I did this by the book. I associated my personal domain name with my MobileMe account, then changed the CName pointer at GoDaddy to MobileMe (MM), then went back to MM and hit 'Done'. iWeb now lists my MM account as 'My account name (personal domain name). It took a little while for the DNS pointer to propogate, but now I can go to a browser, type in my personal domain name, and MM delivers my iWeb website as I wanted it to, apparently from my domain, not web.me.com. The problem is, as soon as the DNS propogated, MM delivers my MM site OK, but iWeb can't find the files for it anymore. All my pages immediately went red (unpublished) when I tried to update the site, and any attempt to Publish gives me this error "iWeb couldn’t connect to MobileMe. Make sure your Internet connection works and try again." I'm cable connected to an ADSL router, and Airport connected to a cable router, and neither service has dropped out. I've rebooted, and retried, and the website is up under my own domain, so GoDaddy and MM both got it right. What did I do wrong? Thanks, someone... anyone?

    This is now sort of resolved, but not very satisfactorily. One of the trainers at my local Appple Store found an old support issue in the archives going back to 2008, which blamed security settings for update problems. Coincidental with associating MobileMe with my personal domain, I had checked the privacy box and added an ID and PW to the site. That was the problem, not the personal domain, that was preventing iWeb from finding my MM account. Uncheck that box and my site happily updates. Of course, now I have a site that I cannot make private. In this case, not a show-stopper, but disappointing. I have reported it as a bug in the latest version of iWeb. Thanks for your help.

  • Site made with iWeb using personal domain name

    I have created a web site on iWeb 08 and have a personal domain name through Network Solutions.
    The website was published to Mobile Me after "set up personal domain" was done. The C Name record was changed at Network Solutions to web.me.com. When I write the domain name in the browser a box comes down asking "idisk.mac.com" wants user name and password.
    1. Why is it asking for this?
    2. every ID and Password I put in, it tells me is incorrect? Ahhhhhhhh What does it want from me?
    Please help - I've waisted so much time on this (since last week).
    The website name is www.theplazarealty.com is you want to take a look.
    Thank you

    This relates to a problem I can't find in the iWeb manual. Where is my iWeb site actually published to, so I can accurately update it using FTP software, and which method to use for publishing it to domain names?
    I have created two websites for two different purposes each with a personal domain (one hosted, the other with webforwarding), and through ignorance have done all three options Publish to MobileMe / Publish All to MobileMe / and Publish to a folder (my home computer user Sites folder). As a result I have three Sites folders each containing both 'mysites'- Computer/user/Sites/sitename, or iDisk/user/Sites/sitename, or iDisk/user/Web/Sites/sitename - all different sizes, worryingly, leaving me unclear which is doing what. What is the diff between Publish All to MMe and Publish to MMe - they both seem to entail both sites totally republishing even if only one page has changed. Each time, of course, it takes several minutes or more to clear through the publishing process, and then some 20-30mins more to synchronise with FTP before I find out whether I've only used the duff old version after all. What is the difference between the three Sites destination folders? Can the difference be used productively? Should I, eg, ensure my sites exist both on my computer and iDisk as backup?
    Further confusing factor is that when I log into MMe and look at my folders icon on my iDisk, which are Sites and Web/Sites, the contents of the two 'mysites' folders listed under both areas are different from the SITES/iWeb display listed below them, which seems to be a truncated sort of merger of the 'mysites' contents without their separation into two. Is that iWeb item under SITES on the folders page listing a fourth set of the contents,or what?
    Now to synchronising/updating: which Sites folder to use to synchronise the websites with. Can I get updating in sync with republishing? My domain host UKcentric does not provide the CNAME options you have all talked about and they are unobtainable on my hosted domain page. I sent him the web.me.com message as described in the iWeb Personal Domain instrux, but he has persistently instructed me to use FTP software to upload and update the sites. He is not Mac-friendly, he admits. I have now used three programs, ClassicFTP, FileZilla and Cyberduck, all of which seem to be rather different and none of them has told me the sync has completed (the connection drops out, etc - it does take a long time, say 30-40mins to do, and I never know when I "resume" whether it'll pick up where it was or go back to zero start). If I am stuck with this laborious method of regular manual updating, I want to know I am using the correct Sites folder to synchronise the website with. None of this is clarified in the iWeb manual. Can anyone help?

  • Can i use a personal domain name with iweb 06?

    I have 2 personal domain names. and i read some where that i can host with.mac and still use my personal domain name. does any one know how to do that or is that just a feature with iweb 08. i bought this comp in 07 new so guess its iweb 06 or 07. little help here?

    AlexandreaJane:
    Welcome to the Apple Discussions. Yes you can. See: http://discussions.apple.com/thread.jspa?threadID=1164519&tstart=0 and Personal Domains.
    OT

  • Using a domain name with the mac site

    If I use a domain name on Site #2, does that mean that Site #1 will automatically have the same domain name?
    I already have a Site #1 up and running. Now I purchased a new domain name that I would like to use only for site# 2. I was worried about going in with any edits to Site #1 just in case it would go to the new domain name instead of where it is right now.
    Any light on that subject?

    If you have 2 websites in the same domain folder the uppermost site or the site that you most recently published will be linked to your domain name. If you don't want it to be then you need to re-publish with the site that you want to be linked to your domain name is uppermost. You can move the sites around by dropping and dragging.
    The easiest thing to do is to separate the sites so that you have site 1 in 1 folder and site 2 in another. Following this, the site that you publish first will be linked to your domain name. If it is not this site that you want then just publish the other site.
    How do you have the first site set up? Is it using CNAME or web forwarding? Have you entered your personal domain name into your .Mac account?
    If you have one .Mac account and two websites and two personal domain names, then you can use CNAME for one site and web forwarding with or without masking for the other site. You can only enter one domain name into one .Mac account.

  • Personal Domain Name with Homepage

    I created my website in dreamweaver. I have my files stored in the sites folder. I went through the whole homepage procedure to upload the files. Now I want to use my personal domain name for this site.
    The current location of the site is this address: http://homepage.mac.com/n1konic/
    My personal domain is this: www.jamesjackman.com
    I tried making a new CNAME thing in my godaddy toolpanel. alias was www and the points to field had web.mac.com
    I waited 48hrs and nothing happened. I have tried turning on forwarding and that doesn't even work.
    Someone help please.

    Penypound wrote:
    What do you mean the files should be in a sub folder?
    Apple says:
    if you plan on mixing both custom and iWeb-created sites, you should keep your custom site entirely within a subfolder of the Web/Sites folder.
    ...Which means don't upload your site folder plus the separate index.html file directly to the Web/Sites folder. Instead, put them both in an empty folder and upload that folder now containing your site folder and index.html file. That folder is then considered to be a "sub-folder" of the Web/Sites folder.
    Directory Listing Denied - This Virtual Directory does not allow contents to be listed. Is that what i'll see during the 48 hour wait period or is that suggesting i'm still doing something wrong?
    Sorry, I don't know. If no-one else chips in here with some advice, you could ask your domain name registrar/hosting service what that message implies.

  • Using a Domain name with embedded PL/SQL Gateway

    Hello all
    I wish to link domain name to an application
    e.g. www.mydomain.com goes to application 100
    or www.ano.mydomain.com goes to application 135
    I have successfully done this in the past using HTTP server.
    My new installation does not used HTTP server ... I have only configuration Embedded PL/SQL gateway
    Can I route using embedded PL/SQL gateway a URL to an application?
    Thanks
    Pete

    PS ... I am using APEX 3.1 with 11g

  • Using regular domain names with iweb?

    Is there a way to direct a normal www. domain to an iweb-created web site without putting all the extra .mac stuff in the URL?

    Hi Elmeroguero,
    If you buy a domain name at GoDaddy say elmeroguero.com for 10$/yr you then will be able to access the site you publish on .mac by entering elmeroguero.com.
    EVERYTHING ELSE is business as usual. You publish your website by hitting publish button in iWeb and so on just as you did until now. All your pages are stored on .Mac and so on. The only thing changing is how you can access your website from browser (nevertheless you will also still be able to access your website typing the web.mac.com/username/ address).
    Regards,
    Cédric
    (Difference between WebForward, WebForward with cloaking and CNAME:
    -WebForward: after you typed elmeroguero.com in the browser you get forwarded to web.mac.com/username/ and web.mac.com/username/ will display in the browser
    -WebForward with Cloaking: after you typed elmeroguero.com in the browser elmeroguero.com will display in the browser and don't change while people browse through your website
    -CNAME elmeroguero.com will display instead of web.mac.com/username/ and while browsing through your website it will look like elmeroguero.com/sitename/nameofpagepeoplelookatnow.html)

  • Using a domain name with .mac and iWeb

    How does one go about linking a domain name to the iWeb pages/ .mac account?
    In other words, I don't want to have to give out the long web.mac.com/blahblahblah/site
    name, I'd like to just have a domain name.

    Dottonedan...
    I have replied to your thread over here...
    http://discussions.apple.com/thread.jspa?threadID=647660&tstart=0
    You might want to have a look at the public DNS service that I posted about.
    What you are looking for is basically a domain name server that will accept your domain name and be able to translate the words into the numbers like you mention. That's what DNS servers do. There are LOTS of DNS servers on the internet and once you get your domain name hooked into one the information will propagate within days if not hours, making your domain name functional.
    Anyways, look back at the thread you started and you'll see my post there... we'll start there and get you squared away sooner or later, i'm sure.

  • Using a personal domain name

    I am trying to use a personal domain name with my iWeb page. I found the directions to do so - it says go to File>Set Up Personal Domain. I am using iWeb 06 and I do not have an option under File (or anywhere else) to "set up personal domain". What am I doing wrong?

    I wonder if you could help. I have iWeb 08 and have followed the instructions for personal domain name and its be 4 days now and my page is still loading with the long address. I've contacted .mac about his but nothing yet. Do you know what to do?
    Did you purchase a personal name and, at the place where you have it, set the www CNAME to web.mac.com? Or arrange ordinary forwarding?
    Could you provide your personal domain name plus the name you gave your site inside the iWeb app?

  • How do I remove the iwebsite name from my personal domain name?

    I have successfully setup my MobileMe account to use my personal domain name with my website created in iWeb '08. How can I make my web address read www.mydomain.com/welcome as opposed to www.mydomain.com/iwebsitename/welcome ?

    To unpin a Tile
    Tap and hold the Tile you want to remove from Start.
    Tap Unpin .

  • How to use iPhoto web gallery with iWeb & personal domain name

    So, another question about iWeb 08:
    I've set up my site to use a personal domain name, like www.mypersonaldomain.com. I've configured everything with my DNS settings so that it actually points to my iWeb site, and I'm happy about that.
    However, I've imported a few iPhoto '08 web galleries into my site, but when I browse to them by going to www.mypersonaldomain.com and clicking on the link for my gallery, it goes to a URL that actually shows my .mac account, i.e. gallery.mac.com/sockdaddy/gallery1/photo.jpg
    Is there any way to have the web galleries that I'm using become a more transparent part of my iWeb site, and use my personal domain?

    I've never done this on .Mac but I do use this on my server. I don't see why it wouldn't work.
    In iPhoto select your web gallery and in the "file" menu select "export" and then "Web Page".
    Select your options and click "Export" to the desktop.
    There are now 4 folders and an index.html file.
    Change the name of the index file to whatever you want to call the page e.g WebGallery.html
    Now go to Finder/Go/iDisk/My iDisk/Web/Sites and open your website folder.
    Drag and drop the 4 folders and the html file from your desktop into this.
    Create a link to this from your website in the "link" inspector and choose "external page".
    The URL for the link will be the same as any other page on your site except WebGallery is substituted for the page name.
    If you check the "open link in new window" you won't have to worry about the fact that you don't have a link back to your site from the WebGallery page.

  • Multiple Web Sites with Personal Domain Names - Overview

    I have read through the last 10 pages of these discussions and have almost worked this out, but I need some help.
    Problem:
    I want to publish and edit two separate web sites with their own, individual, personal web addresses
    from the same user account on the same Mac using iWeb '08 (2.0.2) and my .Mac account
    _So far:_
    I have purchased and registered the two domain names (with Cheap-DomainRegistration.com)
    I have configured the CNAME to point to web.mac.com, and "Set up a Personal Domain" in iWeb successfully, but using a separate Mac for each web site.
    The two sites work great.
    _What (I think) I need to know:_
    (excuse me for copying these posts out, but I can't find a way to link them to this post)
    1) Should I be using iWebSites as suggested by Old Toad (posted Jan 24 in response to StAnNe's "Multiple Websites--HELP!!!")?
    I use iWebSites to manage multiple sites.. It lets me create multiple sites and multiple domain files.
    2) Should I be using Mireille's approach (also posted Jan 24 in response to StAnNe's "Multiple Websites--HELP!!!")?
    Yes you are correct in the thought that with a family pack you can use different accounts and that is the easiest way to upload with one click to .mac. But it is still possible to publish differents sites to one .mac account if that is all one has. Even if the sites are in one domain file each purchased mysite.com domain name purchased can be pointed to a different page in the site
    Look at it this way
    Original Poster has
    site1 page 1 page 2 and so on
    then he/she has brothersite page 1 and so on.
    They each have a domain name purchase wherever
    then site1domain.com is forwarded to site 1 page1
    and brotherdomain.com is forwarded to brothersite page 1.
    Even though both sites are in the same file they do not have anything to do with each other.
    This is one possibility there are others but for a novice user this could be the way to go for simplicity.
    (Mireille, if you're there, can you clarify what you said - thank you)
    3) Would I use Roddy's fix (posted Jan 23 in response to canadensis' "Publishing Multiple Websites?")?
    Here's an example of how you can separate two websites that are on the same domain file.
    Quit iWeb
    Create a new folder on your desktop and call it "iWeb Sites".
    Inside this folder create two more - Website A, Website B.
    Go to Home Folder/Library/Application Support/iWeb and copy your domain file - command C
    Paste this into folders A and B - command V - and also paste a copy of it somewhere else - like in Docs - in case you make a mistake!
    Double click the domain file in the folder Website A - this will launch iWeb.
    In the left column, delete site B, save and quit iWeb.
    Double click the domain file in the folder Website B to launch iWeb.
    Delete website A, save and quit.
    Drop the iWeb sites folder into your Home Folder.
    If you want quick access to this folder you can highlight it and do command L to create an alias to leave on the desktop.
    From now on, to launch any site in iWeb you open its folder in the iWebsites folder and double click the domain file.
    This is not necessary when you are working on only one site as iWeb saves the domain file of the last site you were working on to Home Folder/Library/Application Support/iWeb. When you open the iWeb application, the last site you worked on will be launched.
    Summary:
    I'm not sure if some of the answers in previous discussions allow for personal domain names, which is what I need.
    I would be very grateful for any suggestions as I'm getting bogged down.
    Many Thanks,
    Jeff

    When you said, "you don't need to do CNAME for both sites…", would this method still allow me to use personal web addresses for both sites?
    Yes. With "Ordinary Forwarding" you normally just type your .Mac url (web.mac.com/username/sitename) into a form at the place where you have your name.
    I thought I was using 'web.mac.com' as the 'www' CNAME (alias) for my personal domain name (web address), so that when someone typed in my personal domain name they would 'go' to the domain registration location, which would then pass it on to the .Mac server, where my web site is hosted.
    That's exactly right. It's just not the only way to do that. Ordinary Forwarding is another way, but it differs in terms of what appears in the address bar of the browser. Either you will see web.mac.com/username/.... or, if you add "masking", you will see your personal name for all pages. The CNAME method results in a address bar that reads www.myname.com/sitename/pagename.html.
    Am I way off?
    All help gratefully received,
    Jeff

  • Using my Personal Domain Name on a trial version of .Mac?

    Okay, I have a trial version of .mac, and am very happy with it. I used Iweb to build a good website for my artwork, and I'm all set to publish. But I want to put my registered domain name to my new site, so when you type the simple domain name (ex: "www.site.com") my .mac site that I built on Iweb will show up.
    I have a previously-built site hosted by a different company where my domain name used to point. After calling the company where I bought the domain name, they had me redirect the name so it points to .mac. It didn't work. When I type in my domain name (ex:"www.site.com"), the old site comes up.
    I went onto the help section of Iweb, which says to log into .mac, and in the account info section, press a button that says something about personal domains. _THERE IS NO BUTTON THERE_!!! Is it becuase I only have the trial version of .mac? I intend to buy the full version, but I wanted to play with my free trial memebership first. If I have to, though, I'll just buy the full version so I can add my personal domain name to the .mac site.
    Has anyone come across the answer for this? I'm inexperienced with hosting and domains and all that...the answers I've gotten from emails are like greek to me. Can anyone help?

    Is it becuase I only have the trial version of .mac?
    Yes.
    You should still be able to point your personal name to your .Mac site via ordinary forwarding/masking, where you normally just type http://web.mac.com/username into a form at the place which holds your name.

  • IWeb and using my personal domain name.

    I have never published a web site before and this is a first time for me.
    With having iWeb version 8 installed I have created a website with photos etc.
    I have also registered a domain name to use my personal name. This is the one and only web-site I have published.
    The name has been set up for forwarding with the CName as web.mac.com with the host site in the section of ‘Masked forwarding’
    And in my personal settings in the account manager on .Mac the correct name has been entered to use for my iWeb site. For example www.anthonyjhowe.com which is my registered name.
    In the iWeb application under file I have published all my pages to .mac.
    In my iDisk folder on the Internet there is a folder named “web/sites and inside this folder, there is my gallery but also a folder named AnthonyJHowe, this has all my pages I created in iWeb.
    There is another folder named “iWeb. But inside this there is one file named sites.rss, and that is all. This is replicated on my iDisk on my desktop.
    Now in iWeb when I publish all to .Mac I receive a message that my site can be visited using my domain name and would I like to visit or announce the site. This lists all the pages I have published.
    When I click on visit, it takes me to the .Mac welcome screen and not my site.
    That’s how far I have got. It’s been over 72 hours since I registered the domain name.
    I have searched and read some posts about this but I don’t seem to go any further with this.
    Could you give some suggestions please and perhaps point me in the right direction?

    This iWeb’s Domain Forwarding feature that has you publish the site to your .Mac account and then uses your domain name as an alias for your Web site should be relative simple procedure, but with quite a lot of posts on this subject, including myself is not easy to set up and it should be as iWeb 08 is a consumer product. There is little information about this at present.
    Getting in touch with the registrars can be quite daunting and eventually you may get one person in the office that may be able to help you. Apple's information to suggest you contact the Registrar of you domain host to create a CNAME does not help an ordinary consumer either.
    My issue with the Personal Domain feature is that it places the burden of making the switch on the user, and it is far from a straightforward process and my unfortunate lack of experience has led me to ask the question in the first place.
    This discussion forum seems to be the only place that gets close to helping you out.
    As it stands, the instructions from Apple are extremely vague, mostly advising you to contact your domain name registrar. They give no indication of what to expect or do if things that aren’t working correctly. And that's why a lot ask the question in the first place in this discussion forum. However those who have experience in dealing with these matters may not always see your post.
    I can usually work out problems to do with computing, but to be honest this one has me beat and yet it should be and probably is a simple procedure to carry out. But there is either very little information to carry out the procedure or confusing information elsewhere that makes the mind boggle.
    The link below is the only information I can find from Apple to help you, unless someone knows of other information.
    http://docs.info.apple.com/article.html?artnum=306195

Maybe you are looking for