Using several projects in one show

1. Hi, how can I use several projects, organized together as a one 40-min long show?
2. I need a way to make a 40min show of great photos, that i'm going to have on my iPad and show with a video HD projector on a wall. Is iMovie the easiest tool for this?
Thanks!

Hi
1. In iMovie one can not easily combine projects. One must do a work around.
• Export Each project out as Full Quality QuickTime .mov
• Import them into Event's
• Start a new Project and use the new Event's
2. No idea - way out of reach for me.
Merry Christmas
Bengt W

Similar Messages

Is it possible to use several RootAppModules in one UIX Page?

Hello,
I want to use two RootAppModules in one uix page. The reason is, that application modules look at different database connections.
I get this NullpointerException:
java.lang.NullPointerException
     void oracle.cabo.data.jbo.ui.data.ViewObjectDataProvider.init(oracle.cabo.ui.RenderingContext)
     void oracle.cabo.ui.data.provider.TableDataProvider.init(oracle.cabo.ui.RenderingContext)
     void oracle.cabo.ui.data.provider.CachingDataProvider.init(oracle.cabo.ui.RenderingContext)
     void oracle.cabo.ui.data.provider.DataProviderStack.addDataProvider(oracle.cabo.ui.RenderingContext, oracle.cabo.ui.data.DataProvider)
     void oracle.cabo.ui.LogicalNodeRenderingContext.addDataProvider(oracle.cabo.ui.data.DataProvider)
     void oracle.cabo.ui.composite.CompositeRenderingContext.addDataProvider(oracle.cabo.ui.data.DataProvider)
     void oracle.cabo.ui.laf.base.DataScopeRenderer.prerender(oracle.cabo.ui.RenderingContext, oracle.cabo.ui.UINode)
     void oracle.cabo.ui.BaseRenderer.render(oracle.cabo.ui.RenderingContext, oracle.cabo.ui.UINode)
In my page I have two Registry entries and in my page content I open the second AppModuleScope after closing the first AppModuleScope.
I am using JDeveloper 9.0.3.2. The documentation says it should be possible???
Thanks,
Christian

I explored my problem yesterday and this are my results.
Everything works fine, so using different root application modules, if I come from a simply navigation event handler.
But when I use my own event handler which itself is enclosed in an root application module scope, the next page is not able to render data coming from different root application modules.
The event handler of my source page looks like this:
<event name="selectionEvent">
<bc4j:findRootAppModule name="MyRootAppModule">
<bc4j:findViewObject name="MySelectionVo">
<instance class="test.MySelectionEventHandler"/>
</bc4j:findViewObject>
</bc4j:findRootAppModule>
</event>
Regards,
Christian

Using several instances of one ViewObject

Hello
The strange exception was thrown when data in the same cell in a database was updated by two instances of viewobject. (I put one ViewObject several times in ApplicationModule with different names. Sometimes using ViewObjectLinks )
JBO-25014: Another user has changed the row with primary key oracle.jbo.Key[94 ]
Is this bug or feature?
Damir.
P.S. We're using MS SQL Server, ADF BC, ADF Faces, Jdeveloper 11g
Edited by: Damir Yunusov on Dec 12, 2008 5:09 AM

Hi,
Look at configuration in the application module, maybe depend of this.
Matteo

Use several macs on one job?

I have several macs that I would like to link together in a way to use their respective CPUs at the same time on one special task. Usually in the application Handbrake, but also iDVD and iMovie.
Does anyone have a fairly straight forward guide on how to accomplish this? What do I need and how do I do it?
I thought I could save a lot of time to have 3 or 4 Core 2 Duo CPUs converting the same video file at the same time.

Applications have to be written to support distributed processing, something that neither Handbrake, iDVD nor iMovie are. Compressor, part of Final Cut Studio, can distribute compression between multiple systems, but that's the only application I know of that does have distributed processing that's related to what you seem to want to do.
Regards.

Anyone have experience with combining several projects into one?

I have four separate projects (they're actually four sections of one movie) I want to combine into one so I can burn them all together onto one DVD.
The separate discs run approximately 29:00, 29:00, 24:00 and 13:00, for a combined total time of about 1 hour and 35 minutes.
Now, on the blank DVDs I'm using, it says you can put up to 2 hours of video on them. But I've had people tell me that it's really not a good idea to put more than an hour of video on one disc. (The total size would be 12.4 GB (4GB/3GB/5 GB/0.4 GB), and the disc says that it holds 4.7 GB. But I was told by someone that the size doesn't matter, it's the amount of time that does.)
I'm a bit nervous about combining everything, because when I was first working on this movie, I had it all together in one project, and right before I was finished with it, the Circling Pinwheel of Doom arose and never went away. I never figured out what happened, but I have a feeling it was because the project was so big. Nothing the people at the Apple Store did made it work, and they deduced the file was corrupted or something, and I had to start all over again.
(That's why I separated it into four sections this time.)
So I'm just wondering if anyone else out there has been down this road, and can give me some good words about what or what not to do. Thanks.

I spoke with AppleCare and they gave me good advice on how to do this.

More than one iMovie project into one iDVD project??

Hi,
I am editing several iMovie projects which I had intended to put on one DVD using iDVD.
Can I use iMovie to share several projects to one iDVD project or should I use iDVD to import several (completed) iMovie projects to the one iDVD project?
Can I even have more than one project on in an iDVD project?
I am currently importing a large video file to iMovie so iMovie is inaccessible.
My iMovie projects are video only (no menus, etc. until I import to iDVD).
Cheers

Well, it is recommended that you use the 'Best Performance' default setting from iDVD's Preferences for movies under 60 minutes to get the best quality.
If you want to put 60-120 minutes on one DVD, you have to select either 'High Quality' or 'Professional Quality' Both will give good results; PQ will take a bit longer to do and is supposed to be higher quality.
I usually make movies just under 2 hours, and I always use PQ. I am pleased with the quality of my movies on DVD disks. However, you should know that I am using iMovie 6 and not any hi-def videos (yet ).
David Pogue explained the process of 'Best Performance' and 'Best Quality' (what the option was before HQ and PQ) like this:
Best Performance option allots "+a fixed, predetermined amount of data to each frame of video...no matter how many minutes of video...A lot of the DVD might wind up being empty--if...the project contains less than an hour of video. But the process will go quickly, and the video will look really great+."
Best Quality option uses "+every micron of space on this blank DVD+" because it analyzes "+the amount of video...included+," and divides "+it into the amount of space available on the DVD. The amount of information used to describe an individual frame of video will vary from project to project, and it will take...a lot longer to burn the DVD because+" of "+so much analysis. But at least+" you "+will get two hours of great-looking video per disc.+"
If your videos are short, you might want to try all the encoding options and see which gives you the best quality.

I have one folder with several projects all of which Aperure can not find the original. I do not use referenced files. I can't make any adjustments like cropping etc. What can I do to print any of these photos?

I have one folder with several projects all of which Aperure can not find the original. I do not use referenced files. I can't make any adjustments like cropping etc. What can I do to adjust or print any of these photos? IO have no ther projects with this problem. My Aperture Library is automatically saved to two external drives.
Dick Koos

I have one folder with several projects all of which Aperure can not find the original.
Have you checked inside your Aperture library, if the original files are still there?
Try to find out, when the images in those projects have been originally imported, then open the Aperture library by ctrl-clicking it and using the command "Show package contents" from the pop-up menu. In the window that will open, select the folder "Masters" and browse the contents. You need to find the subfolder with the year you imported the images, then the folders with the month and the day.
Are your original files still there?
If yes, copy them to a folder on your desktop for safe-keeping, and then try, if repairing the permissions and the other Furst Aid tools will help Aperture to connect to these missing files again - see this link: Repairing and Rebuilding Your Aperture Library: Aperture 3 User Manual
If the First Aid Tools don't help, then check, if Aperture has moved the missing images to a "recovered folder". If not, reimport the images, you saved to your Desktop and use the Lift&Stamp tool to transfer any adjustment and captions to your reimported images.

Combining several iMovie projects into one, time-not space-being the factor

Hello,
Space is not an issue (large external drive), but I'm trying to figure out the fastest way to combine several iMovie projects into one (so each movie will become a chapter in iDVD). I'm pretty sure there must be a better way than I'm attempting, selecting all the clips in clipviewer, then dragging and dropping to the new project clipviewer. As I've done this, the "time remaining" window keeps growing (started out about 4 minutes, climbed to "92 minutes remaining," then I aborted the move). Details: each movie is about 8-10 minutes long, widescreen, made up of various (sometimes many) dv clips, audio segments, still photos, etc.
I have added dv clips to a project via the media folder (project unopened), but this was a single item and simple to move from trash into the project. In this case, I'm not sure what to move in order to save the entire project intact.
Thanks so much for any help,
b
Message was edited by: Bimp

Thanks for your reply, Klaus. I'm just now getting to try your suggestion to copy and paste from timeline rather than drag and drop from clipviewer. Alas, it seems to be choking terribly on the transfer. This video is not a 60 minute movie, either; it's about ten minutes. I has about 60 files to it. I did get to the point where I felt confident enough to empty the trash and save the project, so I assume the clips that are there are not still "attached" to the unedited dvs.
Earlier I tried to export, in the advanced settings, to the full quality dv, but the quality really dropped, way too much for the intended use. I'm pretty much stumped at this point, unless I can hear some other suggestions.
What I might try doing is simply dragging and dropping all the packet contents of the media folder into the other movie's media folder, but then I suspect I'll have to rebuild the darn thing from bits and pieces and it may be like putting Humpty Dumpty back together again...ugh.
I'm sure I'm not the first person to face this challenge, am I? Of course, my lesson learned is to build one dvd's contents in one imovie project. If it weren't for the fact that I need to offer viewers the option to "play movie" (play all the videos as one movie) I'd simply drag each movie into iDVD and do it that way (the dvd showing each video separately).
Would still love to hear of other possible solutions here, before trying some other forum.
thanks!
B

Is there a way to project a slide show using iPad with Chromecast? Other better solution?

When I travel for business I like to try to just bring my iPad and no laptop. I need to be able to project some slides (could be .ppt or .pdf). I have Chromecast installed and working on the TV. I also have the latest "free" version of Powerpoint on my iPad. I do not pay for the MS360 subscription at this time - I only use it to view slides as needed and edit on laptop. Series 3 iPad with latest software.
1) Is there a way to project a slide show to a projector or TV using Chromecast in conjunction with either Dropbox or Powerpoint, on the iPad?
or in absence of a "yes"
2) What is the best toy to buy so that I can mirror my iPad screen to a projector / TV? Note I don't need a $100 Apple TV brick, please.
Thanks,

Click For LINK OR THIS ONE FOR NOT LIGHTINING CONNECTOR CLICK FOR LINK 2
YOU CANT USE FOR Dropbox etc

Can anyone help me figure out how to sync my ipod with my purchased music? I have used several computer and at one point synced my ipod with a computer that only had about half of my music. My other computers are no longer working. Not sure how to get

Can anyone help me figure out how to sync my ipod with my purchased music? I have used several computer and at one point synced my ipod with a computer that only had about half of my music. My other computers are no longer working. Not sure how to get my purchased music back onto my ipod?

Hi kimcinma!
Your previous purchases are saved on iCloud even if you bought them on another computer. If you can't find them on your current computer, you might need to unhide them. Go to iTunes preferences, and click on Store Preferences. Then click the box for "show iTunes in the Cloud purchases". Then click on OK, and everything you've ever bought from iTunes on that Apple ID will show up in your library. You will need to download them from iCloud first before you can synch them to your iPod Classic. To do this, click on the little cloud with the arrow in it next to your song, and it will download to your computer. When you have the music that you want downloaded, plug in your iPod and synch away. Hope this helps!
Sandygirl

Lightroom is not saving metadata. I have done several things to save and I still get the tag that states is is not saved. I have also created 2 smart collections. One showing metadata has been changed and one showing metadata is not up to date. No matter

Lightroom is not saving metadata. I have done several things to save and I still get the tag that states is is not saved. I have also created 2 smart collections. One showing metadata has been changed and one showing metadata is not up to date. No matter what I do it is not showing in LR that it is saved. I spent 2 days with Seth Resnick trying to correct this and we re created my catalog. It was ok, until I imported new images and same problem. Now I have a new problem, when I bring image to PS it saves it but does not bring back to LR. Am I the only one out there who has this problem?

See:
How to use multiple iPods, iPads, or iPhones with one computer
What is the best way to manage multiple...: Apple Support Communities

Can I use a central glossary file across several projects?

Hi everyone, hope you are all well.
I have started a major project which needs a major glossary covering the companies definitions of various measures. These definitions will be needed by several other projects in the future. Is there a way of each project referencing one file which we can update as necessary rather than having to go and update each project's glossary file in turn?
Look forward to your responses.
Nick.

Depending on number of entries and how tightly you want the glossary integrated into the content (for example, term definitions displayed as expanding text), you might consider other options, too.
One option might be to set the glossary up as its own (very simple) project rather than using the built-in RH glossary feature. Other projects could then display the glossary in a separate window. You could add/delete navigation features as needed. For example, each term could be in its own topic and you could have an alphabetical list of the terms in the TOC pane. Or all terms (or alphabetical subset) could be in long topic with TOC links scrolling to bookmarked terms.
Another option might be to set up the glossary as a PDF file that is displayed in a separate window.

Update several project files based in one project

I have several projects, one for each application in the same
business area.
Some of these manuals share information. I'd like to have a
central project where I have information shared in all (or some)
projects, and automatically update it in all other projects. Is
this possible?
It's similar to the concept of having a master project - but
instead of having this project updated considering all others, I'd
like to have all projects updated considering the alteration in a
central project.

Hi garcia3000 and welcome to the RH community.
There is no way to automatically update the other projects
with the amended central project. If you use merged projects you
could merge the central project into the other project's TOC.
However this stores a local copy of the central project in the
project's baggage folder. If the central project is amended, you'll
have to re-add the amended CHM to the baggage files folder.

Would it be possible to have 2 shared resources, one local containing all common topics and pictures for several projects, and another one remote containing all topics and pictures for collaboration purposes

Hi,
I was wondering, now that I discovered the advantages of Resource Manger, if it would be possible to have 2 shared resources, one local with common topics and pictures for several projects, and another one, remote, containing the whole projects, i.e. topics and pictures, for collaboration purposes.
The local one I intend to use it for my purposes to have common items (topics & pictures) updated in all projects where they appear, and the remote one I intend to use it together with my remote colleagues that might want to do changes in the topics.
This would mean that the common topics and pictures would be present in both resources, the local one as well as the remote one.
Thank you.

Thank you for your fast answer Rick.
I was merely wondering if it would be possible w/o having to use other products outside RoboHelp.
We are already using svn for a lot of other purposes and we are using that for the RoboHelp projects as well, however I was wondering if it would not be possible to have RoboHelp take care of the RoboHelp projects, and with svn to take care of the other things in the company.
Eventually, if it would be possible, I would think to sync all the local projects with the remote projects, then sync the local project with the local shared resources, and at the end sync the rest of the projects with the local shared resources.

In the new version there's no little arrow with back or forward so you can go back several pages in one click. I use that a lot. How can I get it back?

I've just upgraded Firefox and no longer have little arrows by the back and forward buttons on the toolbar. This means I can only click back or forward one page at a time. I used to be able to click on the arrow, see a list of previous pages and then go back (or forward) several pages with one click. I looked at adding the History button to the tool bar but that's not as convenient.

You can get the drop down list by either right-clicking on the back/forward buttons, or holding down the left button until the list appears.
If you want the drop-down arrow you can add it with the Back/forward dropmarker add-on - https://addons.mozilla.org/firefox/addon/backforward-dropmarker

Using several projects in one show

Similar Messages

Maybe you are looking for