Using specifc partner function as access field for pricing

Hi all,
i am planning to add a specific partner function as an access field in combination with the material with which i will maintain the condition record & i want this condition record to be fetched for my respective condition type.
i did the following, i still dont get the value.
copied the new field in the KOMK table (structure & activated it),  assigned it to the relevant access sequence & hence to the condition type, i still dont get the condition record value ( condition record is a valid one too).
what am i missing here?

Hello,
Go to Sales Order - Item Detals - Condition Tab & Click on "Analysis". Here check the Accesses & whether system has found the Condition Record.
Also, as mentioned by Ankur above, most probably the new Partner Function or either of the Accesses will not be prosent in Sales Order.
Hope this helps,
Thanks,
Jignesh Mehta

Similar Messages

  • Benefits of using vendor partner function

    Hello Experts:
    I understand the general use of vendor partner function. But what are the benefits of using vendor partner function? Is it for ease of reporting? Is there a functionality down the line that will not be possible if a vendor partner function is not used?
    The reasoning for this question is, I am at a client that has the general association of vendor and remit to addresses. However, they also have a scenario where they have one main vendor, but there are 30+ remit to addresses. These remit to addresses are dependent on the plant that placed the order. As an example, the vendor is AT&T, but the plant that uses the service in Caifornia sends the check to a remit to address in Calif. The plant in Arizona, sends their check to another AT&T remit to address in AZ.
    My current solution is, for the client to create the partner function that are more straight forward, one main vendor and one remit to address. As for the vendors that have multiple remit to addresses, i am opting out not to create the partner function. Which is why I am asking if there is an issue not using vendor partner function.
    Thanks in advance for your help!!

    It is certainly possible to work without partner functions in SAP.
    It is almost impossible  to work without partner functions in SAP if you do business with global players and need some comfort for your processes.
    It is impossible to work without partner functions if oyu have to do Intrastat reporting with SAP and your goods supplier is located in a different EU country than your vendor.
    In your special case with AT&T without partner functions, you would enter the invoice to your main vendor, the payment run then creates a cheque to your main vendor (and you then use Microsoft word to create a lable with the remit to address that you stick over the SAP printed address on the cheque ..... how does Finance department know that it has to create this lable?.....how will you be able to trace who got the cheque? ..........this is not a good practice)
    Especially in this case the partner funtions gives the real benefit.
    partner funtions are not for ease of reporting, as You cannot run analyses for any of the other partner roles supplied in the standard system.
    if you use invoicing party, then  the invoicing partyu2019s account will be charged instead of the vendoru2019s.
    more can be found: http://help.sap.com/saphelp_erp60_sp/helpdata/en/a1/7b373944f7a97ce10000000a114084/content.htm

  • Sales Partner Functions - Restricted access for assigned partners

    Sales Department would like to use a partner function to assign a responsible salesman to a customer.  They would also like to restrict the access of the salesman to only those customers (and their associated sales orders/deliveries) that are assigned to him.
    How is this done from an authorization perspective?

    Hi,
    This can be achieved thru user exit.  You might need to create the authorization objects for document type, partner function and this has to be assigned to the concerned user.  The validation can be done with the field ERNAM and SYUNAME. 
    Thanks
    Krish.

  • How to use a partner function?

    1. I would like to link a project (or WBS) to the Invoice Approver (for the workflow)
    2. I would like to link a project to a Customer or several Customers
    3. I would like to link a project to a Vendor or number of Vendors
    Not clear how to use a partner function for that reason and where this will be visible.

    Getting following error message for the Customer:
    Customer for function Y2 may not have account group Z010
    Message no. VP303
    Why and where such restrictions are applied?

  • Partner Function Queries Multiple Partners for Single Partner function SO

    Hi Experts
    Is it possible to  enter multiple partners  for Single partner Function in SALES ORDER
    For Ex : We have created Z1 as a Partner function for Sales Executives : and Sales Executive 1 , Sales Executive 2 Sales xecutive 3 etc as sales Partners for Z1 partner Function .
      Now Is it possibe to enter for Z1 -
    sales Exeutive 1
                                                Z1----
    Sales executive 2
                                               Z1----
    Sales Executive 3............
    I would be greatful if you repond the same at the earliest
    Thanks
    Rashmi K

    Hi Rashmi,
    The requested function is possible.
    In the customizing of partner function, you could set the field Unique as blank. Then you could enter multiple partners for same partner function.
    IMG->SD->Basic functions->Parnter determination->Partner Functions
    Hope it helps.
    Thanks and best regards,
    Smile

  • I have been using my apple tv to access netflix for several months.  It suddenly stopped working.  When I try to go to netflix from the menu, it says "accessing netflix" but never does.  I can access you tube just fine, but just can't get to netflix.

    I have been using my apple tv to access netflix for several months.  It suddenly stopped working.  When I try to go to netflix from the menu, it says "accessing netflix" but never does.  I can access you tube just fine, but just can't get to netflix.  Any ideas.  I have unplugged everything and waited but nothing helped. 

    Update software. If that doesn't work try resetting.  Mine started working after the update.

  • Can I use this as a wireless access point for my network

    can I use this as a wireless access point for my network

    umm... use what?
    A Time Capsule? Sure. It's just like many other wireless base stations. It can run in either bridge or route mode - in bridge mode it's just like an access point linking the wired and wireless networks together.

  • Using Mac mini as an access point for home network

    Hi
    I'm looking for some help on using my mac mini as an access point on my home network.
    I have a G5 tower which is wired in to my router and acts as a home server. It has all my itunes library, films, etc
    I stream these to various machines in the house, one of which is a mac mini in our living room.
    The mini is connected to the network via powerline adapters meaning the airport is left free.
    So i set up internet sharing on the mini via airport so I can use the machine as an access point for the living room.
    If I connect another machine to the mini via airport, Internet is working fine but for some reason I can't see the any other machines on the network.
    All I see in the sidebar is the mini, not the server.
    I've tried it on both mine and my friends macbook but had no luck.
    Am I doing this the wrong way?
    How would you go about doing this?
    Cheers

    Internet Sharing may not be providing an address via DHCP, It also may not be providing a subnet Mask that can get you to communicate with the other computers on your local Network.
    Take a look at what IP addresses are being used by the various computers on the network. I would expect you have a Router that may be using 192.168.0.1 as its base "private" address, and issuing DHCP Addresses in that range and higher with a subnet mask of 255.255.255.0, meaning anything with the same three high octets can communicate freely without Router intervention.
    But what addresses are bing used for the Wireless Shared computer(s)? and what subnet mask?

  • Whats the use of PARTNER FUNCTIONS node in NACE transaction

    hello
    i would like to know when a output type is selected as medium EDI or ALE what needs to be entered in the PARTNER FUNCTIONS node and what is the main purpose of this node. Pls help
    ~Suresh

    Hi Suresh,
    Partner Functions Uses
    You use partner functions in transactions, in all areas of partner processing and in some areas of business partner master data.
    ·        For example, you have a real estate business and define the function tenant to refer to your customers.
    ·        Tenant is then displayed in the header and Partner tab page in transactions, and on the Buying Center tab page, when relevant.
    ·        It appears in the Customizing settings for access sequences, partner determination procedures and partner teams
    ·        It appears in business partner master data when you assign partners to partner functions as part of maintaining sales area-specific data, and when you enter excluded partner functions.
    Nace Transaction
    The Tcode NACE is used to link the Standard SAP forms (SCRIPTFORM or SMARTFORM) or the customized form or the new form to its respective print programs. Also the output types, Form entry are linked with their forms and print programs. In short term, i can tell u that configuration or customization of forms to print programs, assigning output types, form entry to the forms are done using this Tcode.
    NACE is used to create output type while creating the output type you will mention forms, and driver program.
    that will be maintained in the table TNAPR.if you create the output type using NACE then it will be automatically visible in table NAST and TNAPR.
    so check in NAST, TNAPR table
    Reward if useful.
    Thankyou,
    Regards.

  • SAP PS Authorizaton use of Partner Function

    Hi,
    I have a similar requirement like http://scn.sap.com/thread/1227415
    " I have a few users, User A, B and C who are all authorized users to the various project system functionality. However, I would like to set up authorization in such a manner that each project/ WBS elements can only be changed/ viewed by its creator and users nominated via partner functions.
    For example, if user A creates a project,, users B and C will not be able to access the project unless user A enters one of their IDs under one of the partner functions."
    After searching on the internet (including the referred link)  I found out that we can do so using OSS 638781.
    However we are on SAP_APPL 617 and this note is not applicable for us.
    Anyone has any clues on this one?
    Thanks,
    Ira

    Hi,
    Unfortunately this is a very basic functionality requirment in multi company code Environment but not available in the earlier versions of SAP SAP_APPL 617. OOS Note 638781
    You can restrict with MRP Controller(Network( / (WBS)Person Responsible &  Profit Centre. (WBS)
    This will solve 80% of your problem. Kindly reply if it works.
    Thanks,
    Shareeq

  • Partner function should be  mandatory  for a perticular sales org

    We have a requirement to make Sales representative assignment to the sold-to-party  mandatory , during order creation ( for a particular sale org)  . We  have to generate incompletion log for all the orders where this partner function is missing in the header data . Please throw some light on how to do this.

    Dear Satya,
    I don't think it is possible sales organisation wise
    But you can have this requirement sales document type wise or item category wise or Customer account group wise through maintaining the check mark for sales employee partner function in the Mandatory check box at partner functions in procedure step in the partner dtermination.
    Because partner functions maintained in the prtner procedure that procedure will assigned at these levels.
    Customer Master
    Sales Document Header
    Sales Document Item
    Delivery
    Shipment
    Billing Header
    Billing Item
    You can do like this
    You define different customer account group for that sales organisation
    Define new Partner determination procedure through copying existing standard one
    You activate mandatory check for sales employee partner function in that new prtner determination procedure.
    You assign this new procedure to the account group which is sales organisation specific.
    Now you create customer master data with that account group in that specific sales org now system will give the error message if don't maintain the sales employee in that customer master data>sales area data>partner functions tab.
    Before going to create customer master you create Sales employee master throuh VPE1 transaction.
    Still not satisfied
    Try with these User Exits with help of ABAPer
    User Exits for Partner Determination
    Partner determination contains the following user exits for your use:
    EXIT_SAPLV09A_001
    You can use this user exit to control whether an address that was entered manually and has already been used in other documents (referenced), should be referenced again if it changes or whether a new address shold be created (duplicated).
    EXIT_SAPLV09A_002
    Call up this user exit if a customer has not been maintained in the current sales area.
    EXIT_SAPLV09A_003
    Use this user exit to control the origin of partners in the partner determination procedure (origin X, Y or Z). If X, Y, or Z has been entered in the Origin field, this user exit is automatically called up during partner determination.
    EXIT_SAPLV09A_004
    Use this user exit to integrate your own check in a program, that runs before the partner is saved in the document.
    For more detailed information, see the program documentation for each ofthe user exits.
    I hope this will help you,
    Regards,
    Murali.
    Edited by: Murali Mohan.Tallapaneni on Dec 15, 2008 10:47 AM
    Edited by: Murali Mohan.Tallapaneni on Dec 15, 2008 10:50 AM

  • Message determination and Partner function LS (Logical system) for PO

    Hi,
    I have worked in the past with vendors (VN) as partner roles in a PO, with the message to create an EDI outpout to Partner Type: LI (Vendor), and this works succesfully.
    Now, the idea was to use in EDI, a Partner Type: LS (Logical system) as a receiver of EDI messages (message types: ORDERS) for inbound Purchase Orders to the Partner.
    So, we have set up a respective message condition, with Partner Function: LS  (Logical System), in transaction: MN04 (Create Output-condition records).
    A. When we use ME59N and create a PO with ref. from a PR (created from a sales order), the message determination works well, it reads the condition set in MN04 (condition records for messages), and creates a message (with output type for EDI , medium: 6, and partner function LS: Logical system). Message is created and idoc is sent to partner.
    B. When we try with ME21N, ME21 and we create the PO with ref. to the same PR, either by entering manually the PR in the document overview of ME21N or by selecting the PR (without entering the PR number), i.e with date, the message is not created in the PO.
    Company code is assigned to purchase organization, and so is purchase organization to plant.
    Any idea why there is no automatic message determination in the case of the transaction: ME21N?
    There is a single message condition that is to be read for both cases (trans: ME59N and ME21N).
    Note: If I try ME21N, and enter the output type and partner (=Logical System), manually, I receive a warning message :
    VN006 (Partner XXXX does not exist for partner function LS). If I accept this warning message, then message is saved- idoc is sent.
    However you can not assign a partner function LS to a vendor, in vendor master data, because of message CZ 327 (Can not use this partner role).
    Anyone with similar experience? Thank you for your advice.

    Hi,
    I well understand that the receiving partner can be a partner: Vendor (LI).
    I have seen that working.
    However, in the Partner Profiles (trans: WE20), the receiver was created as a Logical System (LS).
    We want the partner Logical system (LS) to receive the idoc for purchase order (ORDERS).
    After that, I think that the idea is that the LS can generate an idoc for a sales order creation that will then outbound to another partner.  I think that this is the concept.
    The issue is that I have seen that the POs created with transaction: ME59N, have received from message determination (trans: MN04) the message with partner LS (automatically), and the idoc of the purchase order (ORDERS) have reached the partner LS.
    The question is why the message determination fails when creating the PO from trans: ME21N or ME21, with reference to the PR. Message condition is the same and message determination procedure is the same for both cases.
    There is no issue with customizing for the LS in trans: WE20
    (Port processing agent is Active for LS and ORDERS have the proper processing code for application EF).
    I hope I am helping more with this.

  • Use of partner function && and $1 in PO output determination

    Hi,
    I have setup a message type for sending PO's to vendor by email.
    I use medium '5 - external send' in the output message record.
    During PO output, the system takes the email address of the PO wich is defaulted from vendor master record.
    Now our end users want to send the PO's first to their email address instead of directly to the vendor.
    I thougth to achieve this via partner function && or $1 (created by). I thougth the system will take the email address of the userID that created the PO and send the PO to him.
    But unfortunately it does not work. When I specify the partner function, system complains that the partner does not exist and no email is generated.
    Can somebody help me ?
    Thanks a lot !!

    Hi,
    U have to mention the vendors mail id in vendor master record/ down load in a pdf form 7 send through external mail id.
    first check ur print settings it is either 1 print output 2 external send....
    pandari

  • A new partner function is been defined for a particular customer in r/3?

    Hi All,
    There is a new partner functions been defined for a customer apart from soldto,shipto,payer,billtoparty partner functions.
    The new partner functions is Sales head.
    And how to i bring the sales head information from the customer master from r/3 to bw?
    Do i need to create a new zobject nor enhance the customer master ? nor simply create an sales head object in bw and define the characteristics as Reference characteristics??
    pls help me !!
    Thanks
    Pooja

    Hi,
    You should enhance the standard Data source 0customer_attr with that additional partner function (sales head) as per the proper logic and replicate the same . if it is 3.5 that same object( related to that field length and data type) same object can be added as attribute at info object level and do the transfer rules   and activate that and try to the load.
    Thanks & Regards,
    Sathish

  • Use of Partner Function in WBS authorization

    Hi all,
    Considering the following scenario:
    " I have a few users, User A, B and C who are all authorized users to the various project system functionalities. However, I would like to set up authorization in such a manner that each project/ WBS elements can only be changed/ viewed by its creator and users nominated via partner functions.
    For example, if user A creates a project,, users B and C will not be able to access the project unless user A enters one of their IDs under one of the partner functions."
    Is the above scenario, or anything similar, possible under standard customizing/ authorization settings?
    Many thanks for the help.
    Cheers,
    Daniel

    The steps are as below:
    Project system->Structure-> Operative Structure-> WBS-> Define Partner Determination Procedure and Roles->
    Slect "Define Partner Determination Procedures and Partner Roles"
    Choose the partner function and click "Partner functions in Procedure".
    (Txn:OPSPAR3)
    Here you can make the desired partner function mandatory.
    Please refere this post. mostly will stisfy your req.
    Re: PartnDet.Proc in PS
    Regards
    Nitin
    Edited by: Nitin  Patoliya on Feb 9, 2009 10:23 AM

Maybe you are looking for

  • An Innovative Design That Breaks from the All the Rest.

    An Innovative Design That Breaks the Mold! With a new, curved screen that wraps around the side of the display, the Samsung Galaxy Note® Edge redefines smartphone design by creating a groundbreaking way to deliver information while keeping you in con

  • Keynote to Iweb

    I'm new to Keynote, so please be nice with me I want to create a sitemap (like this one: http://www.apple.com/sitemap/) into my website created with Iweb 09. I would love to make it a little interactive like a Keynote presentation, something simple n

  • Unknown Pop Up Message on 7.0 PLEASE HELP!!

    While I was installing iTunes 7.0, a window popped up saying (and I quote): "1: The InstallScript engine on this machine is older than the version required to run this setup. If available, please install the latest version of ISScript.msi , or contac

  • When I scan new messages and delete w/o reading, T'Bird frequently skips 2-3 messages. Why? They are not prelabeled as junk.

    I scan inbox mail by subject and delete those I do not wish to read. When doing so, T'Bird often deletes the next 2-3 messages. That is a real nuisance. Is there a way to set up so that I only delete as I select? Thank You

  • Transferring library to a new computer

    How do I transfer my musiclibrary for my 60gb photoipod from my old laptop to my new PC? can I transfer from my ipod directly to my new computer? ipod photo   Windows XP