Using the DVD-Rom drive renders MBP almost useless

Under Windows XP Pro on my 2.2 MBP, while accessing the DVD-Rom drive for anything (browsing directories, installing something, playing/burning a DVD or ripping a CD) the computer cannot playback audio. It comes out so skippy and jumpy that you cannot recognise speech. It slows down typing input, mouse movement, and makes video playback skippy. It also hangs up my soundcard (M-Audio Firewire 410), and I have to restart the computer to get sound to work again. I have installed the Bootcamp 2.0 drivers from the Leopard disc.
Does anyone else have this problem, and have you found any way to fix it? Thank you.

Anyone?

Similar Messages

DVD-Rom drive in Satellite C655-S5128 not working properly in Windows 8

I recently upgraded my system from Windows 7 to Windows 8. However, the DVD-Rom drive after the upgrade no longer works properly -- it now treats the pre-recorded disk as if it was completely blank. I tried reinstalling the Toshiba Disc Creator, but that did not work.
Any solution?

You apparently did not use the Toshiba Upgrade Assistant in upgrading to Windows 8. See HERE for DVD and Disk Creator problems occurring during the upgrade and solutions.
C.B.
Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

DVD Rom drive wont read media

Hi!
I'm using a stock dv5-2135, and I'm experiencing several issues. The first seems to be a serious CPU slowdown. I'm even getting a lag when typing. After deciding to do a full restore, I have found the DVD Rom drive won't recognize any media, and won't burn. If I can't get the drive to work, how the frak am I supposed to do a full restore? Short of throwing this thing into the river, any suggestions on where to proceed?
Thanks.

Hi ChefJim27,
Take a look at this document - there is a troubleshooting document for CD/DVD Drive is not Detected (Windows 7) - take a look and try those steps and let me know if that helps resolve your issue.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

My DVD-ROM drive does not work -- what steps should I take?

MacBook Pro, a couple of years old. Was used by an employee for 2 years, now have it at home and found that the DVD-ROM drive does nothing when I insert a disc.
What I really would like to know is what are the first steps with this. I don't want to send the machine somewhere. Should I just get a cheap external? Could it be software?

If by Does nothing you mean it doesn't even pull in the disk. That sound slike hardware not software.
I imagine it is out of warranty? If it is covered take it to be repaired in a mac store. If not I personally would opt for an external as the cost would be much more appealing. But doesn't hurt to inquire about the cost for having a new internal, or even fixing your current one.
But for my money I would opt for external.

Installing Photoshop Elements 12 w/out dvd-rom drive

I bought the adobe premium elements 12 and was told that I could download it online. I need help downloading it without the DVD-ROM Drive.

download the trial and activate with your serial number:
http://www.adobe.com/products/premiere.html

Looking for HP 16X DVD ROM Drive driver

Does anyone know where I can find a driver for the HP 16X DVD ROM Drive? I have an old HP 515n and I'm attempting to install Window 7 on it. Windows 7 is asking for the DVD ROM driver.
Thanks.

Lowell, welcome to the forum.
The only drivers that are available on the Product Specifications page are for XP. Therefore, I don't believe that HP will be developing a driver for the drive. It is possibly too old.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Can anyone point me in the right direction for the link to download Acrobat 9 Standard? I found the link to download 9 Pro but not standard. Old computer crashed and new computer does not have a CDR/DVD rom drive.

Can anyone point me in the right direction for the link to download Acrobat 9 Standard. I found the link to download 9 Pro but not standard. Old computer crashed and new computer does not have a CDR/DVD rom drive.

Hi,
Standard or Pro would be licensed through your serial number, the download link and downloaded file would be the same for both of them.
Pro or Standard would be determined after you put in your serial number.
Download Acrobat products | 9, 8
Thank You
Arjun

Can I use the DVD drive on a PC to install software on my macbook air air

Can I use the DVD drive on a PC to install software on my macbook air

Yes, it's possible.
MacBook Air, Mac mini- How to use Remote Disc to share DVDs or CDs from a Mac or Windows-based compu…
Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks

How to use the dvd drive...?

Hi Guys,
Just bought my new 15" 2.53 Mhz Duo Core MacBook Pro a month ago but until now I haven't figured out how to use the DVD drive. Well I can't seem to find where it is actually... Does all MacBook Pro has dvd drive? Coz when I check back apple's website and look for the same macbook pro specification like my one, it has a dvd drive included so I thought my macbook has it for sure but can't or don't know how to use it... This is my first time to have an apple that's why...
Hoping for your help..
Thanks,
Danny

Hi there Danny.
I believe you are looking for the location of the DVD drive... right?
If you are looking at your computer while it is open, it should be on the right hand side... "under" the keyboard. There is a slit that allows the DVD to be inserted into the computer. I think if you start to insert a DVD in there (shiney side down) part way, it will suck it into the computer.
(note: I'm not exactly sure, because I use a 7 year old iBook that has a pop-out DVD tray... but I think it will suck it in for you)

How to install snow leopard without using the dvd drive?

Is it possible to install snowleopard without using the dvd ? i have a macbook and i have unfortunatly broken the cd and dvd player..

Yes you can.
How to use Migration Assistant:
http://support.apple.com/kb/HT4889?viewlocale=en_US
http://support.apple.com/kb/HT4413?viewlocale=en_US
http://support.apple.com/kb/TS1963

CDRW/DVD Rom drive disabled by Panther

Looks like same problem as dozens of others, but no answers. After upgrading to 10.3.9 the Sony CRX820E is hiding. Toast titanium says "no CD Recorder found" CD's show up in finder but not DVD's. (it is a DVD Rom drive)
Anyone find a fix for this recurring problem or do we just write it off to "progress"?

The entire computer is 6 years old almost 7, and it worked fine until recently.
Maybe its to do with the new power supply I put in, I put a 750 watt power supply in to replace my 250 watt, because I recently got a new graphics card.
the power supply is plugged in correctly, and my system tells me the drive is there, it just won't read DVD discs.
I'll give a run down of how putting the new power supply in went:
1) I found out that the plug I would need for my floppy drive was required by my new graphics card, so I took the IDE cable out of the Floppy drive and motherboard, and plugged the power supplies plug into the graphics card.
2) After a problem with my computer not being able to find either the DVD Writer or CD drives, I found the problem was a loose IDE cable, which I promptly put back in place, then my computer was able to find the drives.
3) Afterwards I changed my BIOS a little, I changed it so it wouldn't try to find a Floppy drive, and changed the sequence of booting the system from having the floppy drive boot first to the DVD/CD drives boot first.
4) I started up my system and popped in a disc for a game, 3 different times the drive refused to work, 3 different times I found a solution that got it to read the disc, then afterwards if I put a different disc in it wouldn't work, and the fix wouldn't work a second time.
I hope this helps answer me, but here is another question. Can a device be plugged in to any IDE port on the motherboard? If so, is it possible using the IDE cable to plug the DVD drive into the port the Floppy drive was plugged into might help?

PowerMac G5 doesn't work anymore simply due to a DVD-ROM drive removal!

Hello, here's what's happened (I'll write using the "present" because I'm not English).
This happened about two days ago:
I need to read an Ultra ATA hard disk, so I power off the Mac.
I remove the SuperDrive DVD-ROM and I connect the hard disk in its place (I already made this with other ATA hard disks in past and it always was OK).
I close the Mac.
I try to start: nothing! The light on the power-on button of the Screen (Apple Cinema Display 20" plastic) and the light on the power-on button of the Mac case starts flashing 3 times (then stop, than other three times, etc...).
So I power off. I change the jumper configuration of the hard disk, like the Super Drive. I try again: NOTHING. Always three-times flashing the lights.
So I power off. I re-install the DVD drive, close the Mac again and restart it.
SURPRISE: the same symptom! The computer doesn't start and always makes the three-times flashing lights...
So I tried totally removing the DVD drive, and restarting it without it: nothing: same symptom.
Unfortunately I made these attempts forgetting to disconnect the power cable of the Mac!
Then I start trying with other RAM configurations, hoping that just a RAM module got burned. I have 6 ram modules (512 MB each).
I try lots of combinations... nothing, always same symptom.
Finally, I disconnect the power cord again, I re-install all the RAM modules, an I try to reset the CMOS: I remove the Motherboard battery for some seconds.
Than I re-install the battery, close the Mac, connect the power cord, restart it: it works!!!
I go in System Info, and I see that it doesn't recognize two of the 6 RAM modules: just 4. The slots of the other 2 not recognized DIMM modules seems empty, but there is the ram!
So I power off the Mac Again. I disconnect the power cord.
I change the RAM modules positions. I try again: nothing! Again the three-times flashing lights symptom, and always black screen again.
So I try again by removing the CMOS battery... nothing... always flashing...
After lots of attempts (also changing again the RAM positions, trying to remember how it was when it worked...)... nothing.
I power off the Mac.
After about an hour, I simply try to power on it... IT WORKED!!!
I used it too... went on Internet, etc... Finished working, I powered it off and went to bed.
The day after, I tried to power it on... nothing! Always three times flashing lights...
From that moment, it was totally impossible to let it work...
I tried to change the RAM positions again... I tried also pressing every time the reset button on the Mother Board... nothing...
The only different symptom that I obtained, a couple of times, was that the two lights (on the Screen button and on the Mac tower button) didn't flash, but was always on.... but it didn't run anyway: totally black screen.
How is this possible? Durin 18 years of computer hardware experience, NEVER happened that a computer got broken just removing and re-installing a DVD-ROM drive!
And I'd never imagined that removing a DVD-ROM could be a dangerous operation... It seems to me just like a car that got broken if I replace the cigarette lighter...
What do you think? how is this possible?
If the CPU or the Motherboard or the RAM too got broken... simply it NEVER should run... on the contrary two times it worked very well!... with a broken Motherboard or CPU??? ...mmmm... so strange....
If the RAM got broken... how is this possible? 6 ram modules burned together??? It seems so absurd... (in past there were 8 RAM modules... one or two got broken... so I removed them and it worked again... but not 6 !!!!).
Any opinion?
Any practical advice?
Prevision of costs?
Thank you!!!
Message was edited by: ununpentium

Hi Wolfman I have an update of the situation.
We tried moving the RAM modules again... and at one point it worked! With just 2 RAM modules.
But at the green screen (with the gray apple darker) it blocked.
So we removed the two RAM modules and installed other two modules: it worked again! These two last modules are 512 MB each.
So we restarted the system pressing "c" with the OSX DVD in the drive, and it worked! I used System diagnostic OSX utility and it found the 2 ram modules, but of 256 MB each instead of 512 !!! How is this possible? (if they were broken OK, but detect just half of its size seems so strange...).
Than we restarted it again connecting an OSX bootable external Fire Wire LaCie hard disk (FW400 port), and it worked!
We used DISK UTILITY to test the internal boot hard disk and it gave me an error (verify disk).
The Disk utility was unable to repair the disk.
Another damage!
I remember that in the past attempts it booted once (not three times flashing) and stopped at the grey screen... (I think: maybe due to the boot hard disk error!).
Unfortunately this external bootable firewire disk has got some problem and it sometimes blocks itself emitting a "clic".
So I powered the mac off and connected another newer firewire lacie bootable hard disk. I connected it in the FW800 port. I rebooted and... surprise: three times flashing light again!!!
No way to let it pass this wall, no initial "sound" again... nothing!
So I removed the FW800 drive, and changed the RAM again (inverted them, always two internal slots n. 1 and 2): it worked!
I booted from the FW400 hard disk, and it worked. I was able to backup some data from the internal hard disk (in order to be able to try to solve the error initializing it), and I tried again to boot with the FW800 hard disk (I want a stable system while initializing a drive!).
As I connected the FW800 hard disk again, I tried to reboot... nothing! Again the three-times flashing light error! No sound... black screen again...
(So, simply removing a DVD ROM I got RAM broken, maybe the Logic board, the hard disk too... maybe the FireWire 800 port too.... mmmm.... this mac is possessed! And it is connected through a professional power stabilizer too!).
So after several attempts with RAM, cmos reset, firmware reset (power it up holding the power on button for some seconds), etc... I got it working again...
So this time I rebooted it pressing "c" and I initialized the internal hard disk using the OSX DVD as boot drive...
Then I rebooted from the FW400 hard disk and I used CarbonCopyCloner to restore an internal hard disk clone OSX complete installation from a .dmg image file in the FW800 lacie hard disk... but this time I connected it not using the FW800 port but through the USB 2.0 port... and it was able to copy the data.
The computer was working... able to boot... no three times flashing error... no FW800 connections... always rebooting OK... the internal hard disk initialized, working, with NO errors (disk utility tested), made bootable...
I tried to reboot again (with no "c" or "alt" pressing, hoping the internal boot hard disk working again): nothing!
THREE TIMES FLASHING LIGHT AGAIN!!! No way to solve the problem now... always flashing...
What is happening here??? I don't understand! I use computers (instable DOS/Windows computers mainly!!!) form about 18 years... never seen a so strange behaviour!!!
We'll try to gather money to replace the RAM, before thinking to a Logic Board replacement...
Your opinion?
Thanks!

I need some drivers for my CD-RW/DVD-ROM drive

I have been going through the apple site for a few hours here and I would really like to speak to a human being about this. This is not hard. I have a Pismo PowerBook G3, which I purchased online, used. Wiped the HD when I got it, installed 10.2.8. Updated iTunes to version 6.0.5. I get an error message when I try to burn a CD, missing software or incompatible drive. The drive is an apple brand drive. I am not certain where to find the serial number on it, there are a lot of numbers on it, but it can be provided if someone will tell me where to look. It's not a hardware problem, I can watch DVDs and play CDs, just can't burn. The drive says "CD-RW/DVD-ROM" right on it, and my computer is able to recognize it as such in the system profiler. I am led to believe I am missing a driver(s) that will allow iTunes to burn CDs with the drive.
It'd be great if I could get this on a disc, but if I can just download it from somewhere (willing to pay for it/them!), as long as I can burn it to a disc or download it again if I install a larger HD, that's wonderful. Or, say, I could wait on downloading it until I HAVE upgraded the HD, which I will probably do in the coming year. This would not be as wonderful, but I'm willing to do it.
Please, can somebody help me?

If you can, I'd recommend upgrading to 10.4, as it usually recognizes any 3rd party CDRW/DVD or DVD burner, without the need for Patchburn.
You can check the xlr8yourmac website for reports from Pismo (and other PB) users who have added aftermarket CD/DVD burners to their Pismos, etc.
I too love the Pismo (have had and upgraded at least 10 over the years, some for me and some for family members). The expansion bay was a great idea back in the day. I've found that most if not all aftermarket notebook, a.k.a. "slim" burners fit in the expansion bay. And the Pismo, coupled with Tiger 10.4 (I find 10.4.7 to be outstanding and haven't updated beyond it), is highly usable still today, given that big hard disks and DVD burners and 54g wifi PCMCIA cards (Airport compatible, no drivers needed: e.g. the Motorola WN825G cardbus card) have plummeted in price from a couple years ago. Too bad that compatible RAM is still expensive, as are new Pismo batteries (new, they cost more than many Pismos on eBay!).
As to brands/models, I like the Sony-Nec Optiarc AW-G540A 8x DVD burner (recognized as Master, ID=0 right out of the box, very fast, fairly quiet, priced @ $50-60) because it just works; and the UJ-8xx series DVD burners from Panasonic, which are pretty reliable (and very cheap on ebay if they're older models), because you can swap the faceplate/bezel with the original bezel from the DVD-Rom in your Pismo (if it was a Panasonic model; Apple also used LG drives).
Good luck.

CD-RW/DVD-ROM drive reads DVD's but spits out CD's

Hi,
The CD-RW/DVD-ROM drive of my Titanium Pawoerbook doesn't read CD's anymore; it makes funny noises and spits any CD's out again. Funny thing is that I don't have any problems reading DVD's.
Is there anything I could do to fix this problem?
Thanks for any advice!
Malte

Try using a DVD drive cleaning disc first. Available in most PC shops.My Ti's Superdrive goes through phases of having a bad day making ugly cluncking noises and spitting discs out but the next day works just fine...
mrtotes

Dvd-rom drive

Help!
I loaded itunes onto my pc using the cd-rom in the box for the 30gb video ipod, but it disabled the dvd-rom / cd-rom drive.
Any ideas on how to fix?
Thanks

Hi
look @ newegg.com; you can get a DVD burner for under $40, so plain DVD-ROM should be more like $25-30.
Check owner reports @ xlr8yourmac.com's "Drive Compatability" page on specific vendors - pretty much anything name brand (Pioneer, LG, Panasonic, LiteOn) should boot an OS installer CD/DVD. Sony is very iffy on Mac support, so I personally would avoid their products..

Using the DVD-Rom drive renders MBP almost useless

Similar Messages

Maybe you are looking for