Using the function SUM() in a calculated Key Figure

Hi All,
I need to create a calculated Key Figure and am looking for the function SUM().Can you please let me know where this is present.I have checked under the "Data Functions" and it does not seem to be present there.
Thanks
Aravind Pattabiraman

Hi,
Make use of aggragation property of the keyfigure, for summing the values of that KF.
Regards,
Rajkandula

Similar Messages

Problems in using a calculated key figure in the Clustering Model

We have a problem in using a calculated key figure in the clustering model. With the limitation of the standard, in the Field tab, each calculated key figure cannot be selected from the selection screen directly. According to the SAP help, we have to use a dummy infoobject for a calculated key figure.
Are there any other ways to use a calculated key figure without using a dummy infoojbect?

Hi,
Make use of aggragation property of the keyfigure, for summing the values of that KF.
Regards,
Rajkandula

Currency translation problem for calculated key figure

Hi All
I have a problem with the currency translation for a calculated key figure.
I have a requirement to show the MM consignment stock value in the specified currency from the selection screen.
For consignment stock, there is no value maintained in the system. So for this we need to calculate the value as below
Restricted key figure: RKFConsignment stock: Total stock with special stock indicator restriction "K"
Calculated keyfigure: Consignment stock value = Nodim( RKFConsignment stock) * (Standard cost / price unit).
Here, in the calculated keyfigure properties --> I have used a currency translation for the 0CALMONTH.
The query has selection on the 0calmonth.
But in the result the I am getting unexpected results.
Do we have any inconsistencies in the currency translation on the formulas?
Please help me on this.
Regards
S.R

Hi All
I have noticed something. I changed my query date selection to Calendar day - Keydate instead of calendar month.
And I have changed the currency variable to fixed exchange rate "CHF", it is working fine.
I think I have some problem with the currency translation variable.
Could anyone of you please send me the currency translation variable for Calendar month with the below parameters
exch rate type : M
Time reference : 0CALMONTH
End of month
Target currency for a variable : < var created on 0currency>
For my report, i need calendar month selection, currency selection.
Please help me with your ideas.
Thank you
Regards
S.R

Currency Translation for Calculated Key figures

Hello Friends I want to use the Currency Translation for Calculated Key figures.
But when I go to Query and go to conversion tab it is always greyed out. Does that mean we can set the fixed conversion type for calculated key figures. like ZSAD Total debit - credit -flow value.
What is the way to do fixed currency translation in query for calculated key figures.
All the below is done now just want to specify this in query but I can'nt since it is greyed out.
All the below is done
I have created a Currency Translation Type " FiscperConversion" "ZVHGR" now this has Exchange Rate Type from Variable "ZVARN" (Which is a variable single value manual input on 0RTYPE Infoobject for exchange rate.)
2. Now Currency Tab: Target Currency is selected from Variable placed in the Report. ZRPVAR.
3. Now the Variable Time Reference is used. Standard Infoobject 0FISCPER
which is beginning of period.

Hi soniya
Your calculated KF is result of some calculation ...so system will not allow u to do any translation on it...to get CT on CKF you should do it on base key figure...still if you wish to do then you can create a formula variable having processing type a customer exit...write code in cmod to rad exchange rate and multiply ur CKF by this formula variable....
Thanks
Tripple k

Exception Aggregation for a Calculated Key Figure in a Structure

Hello BI world,
Please can someone tell me if it is technically possible to use "exception aggregation (count) in a calculated key figure within a structure.
The definition of the structure is:
Rows: Characteristic (Selection) = Problem type (0CATCODE_FE) = "AF01"
Colums (Selections) Month 1 , Month 2, Month 3, etc .. Total
             Details of the selection for each month
                       0CALMONTH = Variable (offset+1 for Month 2 , 3 etc)
                               1KYFNM = CKF
Calculated Key Figure (CKF) =
                   General Tab: = Key Figure "0CAUSE_CNT"
                   Aggregation Tab - Exception Aggregation = Count All Values
                                             Ref Characteristic = Problem type (0CATCODE_FE)
                                                Calculation After Aggregation = not ticked
                   Local Calculations Tab = All "Nothing Defined"
What I am trying to achieve is the "count" of "Category codes" for each month specified in the structure.
I have looked in the cube and there should be a "category Code" count of "9" for Jan 2008 for notifcation type AF01 but the query shows 0?
Thanks in advance, points will be awarded.
Steve

Still not working? Not sure why? Have tried both answers and just not counting...
Is there any restrictions on using "exception aggregation" in a calculated key figures in a structure?
The structure is in the columns and it is a selection that includes the CKF with the exception aggregation plus a restriction on calendar month using a variable?
Any help greatly appreciated.
Thanks in advance.
Steve

I am using Firefox for Mac (v 3.6.11, Mac OSX 10.6.4) and need to use the Function keys (specificlaly Ctrl-F7) in a web application. I can't seem to get it to work the same as in Firefox on PC.

I am using a web application that requires the use of the F7 key. Actually, to be more precise, I need the functionality that you would get on a PC if you hit Ctrl-F7 while in this web application in Firefox. I have changed the Mac's settings to allow standard use of the function keys (rather things like volume up/down, etc.) However, when I try to use Ctrl-F7 it appears to be using the function that is built into Firefox browser rather than the web application running within Firefox. (FYI, nothing happens when I try Cmd-F7 or Alt/Option-F7 either).

Leliforever, cheek you list of installed add-ons, the Ask toolbar can be installed without the users knowledge.
For checking other extensions that may cause this, follow the procedure in this link - https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Hi fellow apple guys, i have this problem. Hope you can help me. I don't know how to use the function keys (F1 to F12) on my macbook air. Pls help

Hi fellow apple guys, i have this problem. Hope you can help me. I don't know how to use the function keys (F1 to F12) on my macbook air. Pls help

Out of the box, to use the function keys as function keys, hold down the fn key when you press the key. Otherwise, you get the picture function on the key. You can reverse this behavior in the Keyboard system prefs.

Hey i hav an hp pavilion g series n i would like to kno how use the function keys without having to

hey i hav an hp pavilion g series n i would like to kno how use the function keys without having to click on the fn + function key

Hi,
You can change this in your system bios as described in the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02035108&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

HT3887 how can i configure my wireless keyword so i can use the Function F keys to control volume etc...? I am using 10.5.8 OS

how can i configure my wireless keyword so i can use the Function <F> keys to control volume etc...? I am using 10.5.8 OS

little wireless cameras would not have the ability to send back to the base, even thought the base can reach it.
Now if you take regular cameras and wire them into a Cisco switch that was attached to a wireless bridge that could shine back to the base...now you might have something, but your still going to have to do a survey/path analysis to determine if it is feasible.
Coverage isnt throughput. I see one base station with 3 or 4 sectoral antennas depending on direction, pointing two several distribution bridges to bridge the gaps that go out again to the cameras...something like that. And all of it should be higher in the air than your construction.

Can one call a function module in Calculated Key Figure?

Can one call a function module in Calculated Key Figure? If yes how, if not, what is the solution if formula does not suffice?
I want to convert duration which is in seconds to Duration in Hours and Minutes. There is a function module for doing it. Not sure how to do it in a formula.

One option you have is a Virtual Key Figure and User Exit to use the Function Module to convert the time from seconds to HH:MM. Here are two documents on this subject to help you create them, based on the technology your comfortable with:
[Implementing Virtual Key Figure/ Characteristics Makes Query More Dynamic|https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e051fda8-71a9-2a10-ac9e-8d17414a8c8c&overridelayout=true]
[Step By Step Process for Virtual Key Figures and Characteristics through BAdi|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/60e34f63-f44c-2c10-488e-c89b04e0ca7c&overridelayout=true]

Using Characteristic in Calculated key figure

Hello every one,
I need a help. Can anyone help me in solving one requirement.
I want to know if i can use a Characteristic in calculated key figure.
Thanks in advance.

Hi,
You can try to create a formula variable of type replacement path and supply this char to pull the value from. Evaluate this value as a boolean (1 or 0 for if there is a value or not). Then you can create a new formula using this formula variable and your CKF. If the result is 1, then you get the value of the CKF, or if the indicator returns 0, then you get 0 as the result.
Hope this helps...

Calculated Key Figures - Result row sum is wrong

Hello all,
Using the example below, I built a calculated key figure for TotalPrice (material amount * material price per unit). I set TotalPrice to calculate the result as a "total".
OrderID OrderLineID MaterialID Quantity PricePerUnit    TotalPrice
1                 1                1            1              5.00           5.00
1                 2                2            1              3.00           3.00
2                 3                1            2              5.00          10.00
2                 4                2            1              3.00           3.00
3                 5                2            3              3.00           6.00
ResultRow:   -                 -            7            19.00          27.00
Now, if I remove OrderLineID and MaterialID drilldown (or from the query rows), I get the following (wrong) results for TotalPrice:
OrderID Quantity PricePerUnit TotalPrice
1                 2              8.00         16.00*
2                 3              8.00         24.00*
3                 3              3.00           9.00*
ResultRow: 8             19.00         39.00*
- wrong results
Is it possible to be able to remove the orderlineid and materialid fields from the query rows and still get correct results for TotalPrice?
Thanks!
-B

I solved the problem by adding an Exception Aggregation to the TotalPrice calculated Key Figure.
To be more specific, I added an Exception Aggregation (set it as type "Total"), then set the reference characteristic to OrderLineID.
As a result, the exception aggregation takes into consideration the orderlineID row when calculating the total price (quantity * priceperunit). Therefore if you place the orderlineid in the free characteristics instead of the query row, the calculation is still performed correctly.

Calculated key figures are returning the word "ERROR"

Hi All,
the calculated key figures which i used in one query are displaying the word "ERROR" at the end of the results as part of each cells formatting.But when i copied the same query to my system then its not showing the word error and even i created one more query which is a replica of the first one and then also iam not getting the error .
what might be the cause of this issue . kindly suggest me how to control the word error in the out put
regards,
jayakrishna

Hi,
you can control the way BW displays exceptions with customizing (SPRO) transaction RSCUSTV4.
identify differences of these settings in your systems and apply them accordingly.
hope this helps...
Olivier.

How to use the function STRIP SILENCE on many regions at the same time?

Hi,
I am doing a projet with a lot (more thant 100) of audio regions, and I would like to use the function STRIP SILENCE on many regions at the same time (with the same parameters).
Here is what happens :
1- I select many regions (10 or so)
2- I choose the function STRIP SILENCE in the AUDIO menu
3- the window for stripping silence opens, and it tells me in it that there are 10 regions selected (if I selected 10)
4- I put my parameters, then I click OK
5- Only the first regions is done! all other regions are untouched.
So... it this a bug or a feature? What am I doing wrong? Is it really working on multiple regions at the same time? If not, how could I do that besides doing the same operations 100 times!
Could that be on the Intel bug that I see quite often ("it works on old Mac but not on Intel Mac")?
Thanks,
Daniel

I think the message you get saying that 10 regions have been selected is not so much a bug as an oversight ---- someone didn't check to correlate the message with the actual functionality of strip silence (i.e., will only work on one region at a time).
So the message is misleading.
I find that it's best to set up a key command to perform the strip silence function. Makes the process go faster than having to mouse around. And I rarely find that the strip silence settings for one region work well on another, so I don't mind the fact that it only works to strip one region at a time.
Sure, it would be cool if it performed the operation on multiple regions, but by using the same set of s/silence parameters for all regions there's always the chance that you might accidentally crop a region in the wrong way, meaning more time spent editing the beginning/end of those regions.

Hello, everybody, who know how to use the function READ_TEXT

Hello , everybody, I came across a program in which there is a function READ_TEXT, what is it used for ? please specify the parameters id object
. Thank you in advance, mate.
         Best regards
Frank
CALL FUNCTION 'READ_TEXT'
      EXPORTING
    CLIENT                        = SY-MANDT
        id                            = '0207'
        language                      = sy-langu
        name                          = tmp_name
        object                        = 'VBBK'
    ARCHIVE_HANDLE                = 0
    LOCAL_CAT                     = ' '
IMPORTING
    HEADER                        =
      TABLES
        lines                         = text_itab
     EXCEPTIONS
       id                            = 1
       language                      = 2
       name                          = 3
       not_found                     = 4
       object                        = 5
       reference_check               = 6
       wrong_access_to_archive       = 7
       OTHERS                        = 8

Refer this link:
http://help.sap.com/saphelp_nw04/helpdata/en/d6/0db764494511d182b70000e829fbfe/frameset.htm
READ_TEXT provides a text for the application program in the specified work areas.
The function module reads the desired text from the text file, the text memory, or the archive. You must fully specify the text using OBJECT, NAME, ID, and LANGUAGE. An internal work area can hold only one text; therefore, generic specifications are not allowed with these options.
After successful reading, the system places header information and text lines into the work areas specified with HEADER and LINES.
If a reference text is used, SAPscript automatically processes the reference chain and provides the text lines found in the text at the end of the chain. If an error occurs, the system leaves the function module and triggers the exception REFERENCE_CHECK.
Function call:
CALL FUNCTION 'READ_TEXT'
EXPORTING CLIENT = SY-MANDT
OBJECT = ?...
NAME = ?...
ID = ?...
LANGUAGE = ?...
ARCHIVE_HANDLE = 0
IMPORTING HEADER =
TABLES LINES = ?...
EXCEPTIONS ID =
LANGUAGE =
NAME =
NOT_FOUND =
OBJECT =
REFERENCE_CHECK =
WRONG_ACCESS_TO_ARCHIVE =
Export parameters:
CLIENT
Specify the client under which the text is stored. If you omit this parameter, the system uses the current client as default.
Reference field: SY-MANDT
Default value: SY-MANDT
OBJECT
Enter the name of the text object to which the text is allocated. Table TTXOB contains the valid objects.
Reference field: THEAD-TDOBJECT
NAME
Enter the name of the text module. The name may be up to 70 characters long. Its internal structure depends on the text object used.
Reference field: THEAD-TDNAME
ID
Enter the text ID of the text module. Table TTXID contains the valid text IDs, depending on the text object.
Reference field: THEAD-TDID
LANGUAGE
Enter the language key of the text module. The system accepts only languages that are defined in table T002.
Reference field: THEAD-TDSPRAS
ARCHIVE_HANDLE
If you want to read the text from the archive, you must enter a handle here. The system uses it to access the archive. You can create the handle using the function module ACHIVE_OPEN_FOR_READ.
The value '0' indicates that you do not want to read the text from the archive.
Reference field: SY-TABIX
Default value: 0
Import parameters:
HEADER
If the system finds the desired text, it returns the text header in this parameter.
Structure: THEAD
Table parameters:
LINES
The table contains all text lines that belong to the text read.
Structure: TLINE
Exceptions:
ID
The text ID specified in the parameter ID does not exist in table TTXID. It must be defined there together with the object of the text module.
LANGUAGE
The parameter LANGUAGE contains a language key that does not exist in table T002.
NAME
The parameter NAME contains the name of a text module that does not correspond to the SAPscript conventions.
Possible errors:
The field contains only blanks.
The field contains the invalid characters * or ,.
OBJECT
The parameter OBJECT contains the name of a text object that does not exist in table TTXOB.
NOT_FOUND
The system did not find the specified text module.
REFERENCE_CHECK
The text module to be read has no text lines of its own but refers to the lines of another text module. This reference chain can include several levels. For the current text, the chain is interrupted, that is, one of the text modules referred to in the chain no longer exists.
WRONG_ACCESS_ TO_ARCHIVE
The exception WRONG_ACCESS_TO_ARCHIVE is triggered if an archive is accessed using an incorrect or non-existing archive handle or an incorrect mode (that is, read if the archive is open for writing or vice versa).
Raja T

Using the function SUM() in a calculated Key Figure

Similar Messages

Maybe you are looking for