Using the mac mini with a dial up internet connection

How do I go about using my mac mini with a dial up internet connection? I am soon to be moving to a rural area and dial up will be my only internet option. Please be very specific in your answer as I am not a very tech savvy fellow. Thank you for your help.

The last time I needed to use dial up I used this amazing device from actiontec:
http://shopping.netsuite.com/s.nl/c.ACCT122499/it.A/id.72/.f
Very hard to find one now, but it has the advantage that it connects to the ethernet ports of up to two computers, rather than using a less reliable usb connection.

Similar Messages

  • Using a Mac Mini with my Mac Pro

    I have a Mac Pro and a Mac Mini, but only one monitor and one keyboard. Can I hook up the Mac Mini so it will appear on the monitor (like another hard drive) when I am using the Mac Pro? I would like to use the Mac Mini strictly as a storage device and be able to drag files from the Mac Pro to the Mac Mini.

    Put the Mac Mini in Target Disk Mode (start while holding "T") and connect it to the Mac Pro with a FireWire cable. If you want it to always start in Target Disk Mode:
    <http://www.macgeekery.com/hacks/auto-bootto_target_diskmode>

  • Connect an amplifier (Rotel RA 12) to the mac mini with USB plug?

    Is it possible to connect the mac mini with an amplifier via usb?

    Hillbille
    I have a Mac Mini and a Rotel RA12.  As you have found out, you can use the optical out from the 3.5 mm output jack to act as an optical input on the RA12.   This option works fairly well to give you a pretty clean sound.  However, there are other options available to you.
    One option is to use the headphone out as an analog signal using a tradtional 3.5 mm to RCA (split) cable, and running it to the analog inputs on the back of the RA12.  This will provide sound, but not quite up to the quality you will be getting using the optical out.  The reason being that the music signal is being processed by the internal DAC on the Mac instead of the better DAC in the Rotel.  The other obvious reason is the quality of cable is typically not up to snuff using that route (although, you can get some high end 3.5 mm to RCA cables).
    Another option would be to use USB output from the Mac Mini and hooking it up to the USB input on the front of the RA12.  This is how I play music from my iPad mini through my Rotel and it works well.  Again, however, you are using the DAC of the Mac equipment instead of the Rotel and are limited as to what type of fileyou can play. For example, you can't play FLAC or 24 bit 88kHz files. 
    A third option, as someone already mentioned, is to get a USB/SPDIF converter, then run a COAX cable to the back of the Rotel RA12.  Depending on the quality of the converter, this is your BEST option for audio quality.   Using something like an M2Tech Hiface 2 converter will provide a high quality, jitter free signal between the Mac and the RA12. 
    Within that third option are two "sub-options" for music playback.  You can use iTunes to play back the music through the USB/SPDIF converter directly, or you can use a third party application that will bypass the volume control of the MAC to give you a much purer signal.  An example would be Amarra or Audirvana. 
    If you choose to use iTunes only, the sound will still be "okay", but you will not be able to play FLAC files or SACD ISO files.   You also won't have much control over the signal processing.   Either of thrid part applications I mentioned will give you the option to play other audiophile grade files, and give you a far better sonic experience compared to iTunes, and they can also be integrated with your iTunes library.  They will also allow you to utilize Direct Integer mode, upsampling, etc ... so that you can have a 44.1kHz file upsample to 192kHz at the Rotel, or have it upsampled to 192kHz in the Mac (using the 3rd party software) before it is sent out to the Rotel.  It just give you much more control over the signal. 
    The last option option above will give you an audiophile grade signal that will allow your Mac Mini to be used with very high end audio equipment with no comprise to the sound.  It will rival the very best of CD or SACD players on the market.  It also sounds incredible and you can use it in conjuction with the Apple remote app to control your music through an iPad.  

  • Who is using the mac mini 2.6 gig i7 to edit video?

    Who is using the mac mini 2.6 gig i7 to edit video? (16 gigs ram)
    I will be using Premiere Pro cs6 (Hoping I can utilize The Adobe Cuda Core acceleration...anyone know?)
    also
    Gonna be using Final Cut 7
    1920-1080P, AVCHD Format. Probably gonna convert to pro-res or mpg2 before editing
    * Is the mac mini going to suit my purposes?
    * Not sure what to do about drives?? Solid state? Sata? Thunderbolt

    I use a 2012 mac mini server 2.0 i7 (quad core) 8GB ram as a second edit station with FCP 7. It works just peachy.
    I doubt the CUDA engine is going to do much for you in Premiere. You need a beefy video card designed for CUDA and the mini doesn't have one.
    Cut ProResLT and you can use FW800. Anything heavier, you'll want to go thunderbolt.
    x

  • I want to Connect my Mac Mini as a Slave to a Mac pro Server while at the same time using the Mac mini's thunderbolt ports peripherals ( ie monitor, Sound Card, Hard drives) Creating a poor man's new mac Pro. Can this be Done?

    I want to Connect my Mac Mini as a Slave to a Mac pro Server while at the same time using the Mac mini's thunderbolt ports peripherals ( ie monitor, Sound Card, Hard drives) Creating a poor man's new mac Pro. Can this be Done?

    Well, I really would love the new unreleased mac pro however , I'm not sure of the expected cost , Everyone speculates from $3,000 to $8,000, in which I may have to wait a while to purchase.
    To the point .... I want fully functional thunderbolt ports to be on the current mac pro's .... wonder if anyone had workarounds yet?...  or could I chain the the current mac pro to a mac mini to make that happen?

  • Using a Mac, OSX 10.6.8; My internet connection is working properly, yet I get the following message in iTunes:  "iTunes could not connect to the iTunes store. An unkown error occurred (-54)."

    Using a Mac, OSX 10.6.8; My internet connection is working properly, I can reach all sites via browser, yet I get the following message in iTunes:  "iTunes could not connect to the iTunes store. An unkown error occurred (-54)."

    I have the same issue with almost exactly the same environment...
    iPhone4S (32GB) running iOS5.0
    Windows 7 Enterprise
    iTunes 10.5.2.11
    iPhone has been set up to wirelessly sync when on charge yet I get this error when the iPhone is not even charging!
    I work for a mobile network operator and although this isn't something we support anyway, we would usually stumble across something like this when customers call us for advice prior to contacting the manufacturer for support, yet this hasn't been a call driver so I'd imagine this is isolated... (either that or not many people have updated their device and set up the wireless sync lol)...
    Hey Apple! Any ideas? :-)

  • From the day 01/04/2014, I can not even update the apps on my iPad 4 or buy via my iPad. The same happens with the iPad mini ... My internet connection being excellent. I usually can get with the devices on the Internet, the App Store, enter into any serv

    From the day 01/04/2014, I can not even update the apps on my iPad 4 or buy via my iPad. The same happens with the iPad mini ... My internet connection being excellent. I usually can get with the devices on the Internet, the App Store, enter into any service of any Cloud Apps. But I can not update or buy apps App What is happening?

    You shouls be seeing this (tap to enlarge image)

  • I have a mac mini with a web cam/microphone and would like to be able to facetime with my families iPhones 4S/5 using wi-fi email address.  I can't call the iPhones from the Mac Mini with Mountain Lion OS.  What is wrong?

    I am trying to include a Mac Mini with a webcam/microphone to call several family iPhones 4S/5 usisng email addresses vice phone numbers so that we can communicate from outside the US via iPhone to the US (Mac Mini) via wi-fi and email addresses.  We are using the same email address for the Mac Mini as for Itunes and made new email addresses for each of the iPhones.  I cannot receive calls from the iPhones but can call the iPhones from the Mac Mini.  what needs to be corrected?
    Thanks.
    Steve

    Hi Steve,
    Thanks for visiting Apple Support Communities.
    You may find some useful suggestions in these articles:
    FaceTime for Mac: Troubleshooting FaceTime
    http://support.apple.com/kb/ts4185
    iOS: Troubleshooting FaceTime
    http://support.apple.com/kb/ts3367
    Have a great day!
    Jeremy

  • Can I use a Mac mini with a VGA monitor?

    The Mac mini web page lists an Apple Mini DisplayPort to VGA Adapter as an accessory, but the Mac mini doesn't appear to have a Mini DisplayPort.
    The Mac mini also has an HDMI to DVI Adapter included, but would this allow a VGA monitor to be connected via an additional DVI to VGA cable? ie. can the HDMI port provide an analogue signal that a VGA monitor can receive?

    Some Mac Minis do have mini-DisplayPorts.  In these two it is between the HDMI and the USB ports:
    (yes Thunderbolt should accept mini-Displayport).
    In this one it is between the Mini-DVI and the USB ports:
    Only the oldest Intel models would you need a different adapter to VGA
    Those you would need a DVI to VGA adapter from Apple such as this one.  Note, DVI to VGA is converting digital to analog, and not very useful, unless your TV has neither DVI nor HDMI.  DVI is much better converted up to HDMI.  And the audio would have to come in separately.  So depending on your display model and make, you may be asking for the wrong adapter.  VGA is fine if all you are going to do is view DVDs on an old TV.  But if you want the ability to use the Dock, menubar, etc..., it is good to have a 1080p TV with built-in HDMI or better.

  • Using a Mac Mini with an iMac (11,1)

    Hi,
    I am considering buying a Mac Mini to replace an old netbook I use as a development server.  The old netbook runs Ubuntu and was a cheap but excellent machine that I utilized to develop customized software.  Unfortunately that machine is starting to fall apart and I am considering replacing it with a Mac Mini instead of another cheap netbook.  However, the price difference is considerable (about 2x) so I am looking to keep the cost down by only buying the Mac Mini and using my iMac to initially set up the machine on the network.  What I want to do is use the iMac’s screen, keyboard and mouse to first connect to the Mini, set up it up to connect to my network and activate the ability to remotely access the Mini.  Once I do that, I can use screen sharing to operate the Mini whenever necessary, correct?  However, I am unsure if my iMac (model 11,1) can be utilized as a target display for the Mac Mini.  If I connect the Mac Mini to my iMac’s DisplayPort, will I be able to do what I want?  And what about my keyboard and mouse?  Do I have to unpair them from the iMac and pair them with the Mac Mini to be able to control the Mac Mini (only the first time I do this...).  Anyone have any experience or thoughts they could share?

    That's correct.  It's sooooo much simpler to just borrow a keyboard/mouse from a PC or have another set for pairing.  It's tricky getting the existing set off the iMac and on to the Mini, first you have to have it on the iMac to enter Target Mode Display, (CMD F2).  Now how do you disconnect or unpair it from the iMac?  If you turn it off and on, it reconnects to the iMac,  If you disconnect it before switching, you can't enter TMD...  then the problem of getting it back...
    Too many headaches, I just borrowed a usb mouse/keyboard off a PC to config and then returned it. 

  • Using the Mac Mini to create a Wisp Client Router

    My condo association has just offered WiFi to all units however the problem that I have is firstly lack of signal penetration within my unit and secondly the use of WPA2 Enterprise PEAP access. I can't find *ANY*  Wisp routers or range extenders that can handle this protocol so what I am thinking is the following.
    (1) Set up my Mac Mini to connect to the condo's WiFi
    (2) Set up internet sharing on the Mac Mini to share it's wireless internet with the ethernet port
    (3) Attach a wireless router or Access point (please tell me which one to use) to share this internet throughout my apartment and hopefully have the Mac Mini included in the resulting network neighborhood.
    Will this work as described? Is this the best (or only) solution? I need to hook up things like a WiFi all-in-one printer, VOIP phone, Dell workstation, Asus laptop,  roku, Sony PS3, + others and the current WiFi signal will not reach them all plus not all devices can join this secured WiFi signal.

    Hello,
    Only problem I see is having the Mini included  in the neighborhood.
    Besides a Wifi Router, I think I'd add one of these to the Mini to make that happen...
    http://eshop.macsales.com/item/NewerTech/MXP3802NU2C/

  • Possibility to use new Mac mini with an USB-DAC?

    Anybody knowing anything about the possibility to use the new Mac mini with an USB-DAC. My reason for the question is that I've heard that USB3 doesn't handle sound. I'm thinking about to buy a mac mini and use it as an HTPC and signalsource together with NAIM DAC-V1.
    // Rode orm

    What I have heard that there are a few USB2 audio devices that
    have had some issues with USB3, but USB3 itself is supposedly
    backward compatible to USB2.
    I would check with the makers of the DAC to see if there are any
    USB3 issues.

  • Using a Mac Mini with my Panasonic CT-30WC14J

    Please excuse the length of this question, but theres a lot of info that may be relevant.
    I have a Widescreen HDTV, Panasonic CRT 30 inch Model CT-30WC14J, and have been using it connected to my iMac for a while to watch TV shows etc. For Christmas I decided to get a Mac Mini for this TV so we didn't need to constantly bother whoever was using the iMac to watch TV or whatnot. Anyway, I hooked the Mini up using the same cable I've been using for the iMac and although it is the same TV, OS (Leopard), and HDMI cable, the Mac Mini only offers 3 resolutions. 640x480 720X480 and 1920x1080. The first two being way too small the last being an insanely high resolution. The on the iMac I had it running in 1280x720 (and had the choice of a few dozen other resolutions if I'd wished it) . However I can't get the Mini to show any but those 3 resolutions. I found a program (SwitchResX) that can change the Mac to a resolution that is not normally selectable but any of the resolutions I need are not default. When I try to use it's custom resolution I'm way in over my head because I need timing parameters for my TV. I decided to install the program on my iMac and see if it could show the correct parameters for the resolution when the TV is hooked up to the iMac but that does not seem to work when I use those numbers on the Mac Mini, so that was a dead end.
    I doubt anyone could help me but is there anyone who thinks they might have an idea on what I can do, like what would be all of the timing parameters etc to input for 720p/i for the Panasonic CT-30WC14J? Maybe any other suggestions?
    Thanks for looking.

    Here is one thing I recommend trying since it has worked for other people under Leopard. Go into Displays preferences and click on the "Show displays in menu bar" checkbox. Go to the menu bar and click on the display icon. In the resulting drop down menu, scroll to "Number of recent items" and select 5 (or possibly try 10 if 5 doesn't work) and then restart the Mac. Hopefully this will expand the list of choices and you will see the 1280 x 720 timing that shows up on your iMac.

  • Mac Mini doesn't share its internet connection

    HI,
    I have a Mac Mini 3,1 (intel core 2 duo, 2GHz), with Snow Leopard 10.6.8, and an inbuilt AirPort Extreme with the Broadcom BCM43xx 1.0 (5.10.131.42.4) firmware.
    I am trying to share its ethernet connection to the internet with an iPhone 3GS via WiFi.  I am able to turn on internet sharing.  The iPhone recognizes the wifi link and I am able to connect the iPhone to the computer.
    However, when I bring up Safari on the iPhone, the iphone timesout trying to go to any webpage, even a simple one like www.google.com.  In the Network settings on the mini, the Ethernet link shows the green "connected" symbol, but the airport link shows the amber "self-assigned IP" symbol.
    I have tried connecting the iPhone in exactly the same manner with a current generation iMac and it browse the internet with no trouble at all.  Why won't the mac mini work as flawlessly as the iMac?  Can anyone help?
    jameseg

    Yes, Ethernet is at the top of the connection list.  See picture.
    Airport is also on.
    Internet sharing is on.
    No encryption (i.e. no WEP is being used).  And the channel is set to automatic.
    Moreover, the airport network settings are set to DHCP and I have tried renewing the DHCP lease.
    Any ideas?  I have trolled the forums and have found no solution.  I've tried selecting specific channels, I've tried DHCP with a manual IP addres, I've tried with and without encryption.  I've also tried creating a computer-to-computer network with the iPhone.  Nothing seems to work.
    Yet, when I use internet sharing on an iMac running SL 10.6.8 everything works fine.

  • Is it possible to use the Mac mini as the start up disk with an older iMac (the basketball with moveable screen) as the monitor?

    I really, really love the moveable screen to our old desktop iMac, and would hate to lose that feature, but, let's face it, it isn't Intel.  Since you can use other hard drives as start-up disks, would it be possible to do so in this instance? and how difficult would it be?

    A slim chance, only if the new Mini was running a Universal version of 10.5.x, which the newest ones cannot.
    But, you could display & run the Mini on the old iMacs screen with Screen Sharing on the Mini, & the iMac using Chicken of the VNC...
    http://sourceforge.net/projects/cotvnc/files/cotvnc/Chicken%20of%20the%20VNC%202 .0b4/cotvnc-20b4.dmg/download
    Assuming the iMac is running an OSX version the CoVNC can use.

Maybe you are looking for